! Started logfile: J2225-0457_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:37:10 2017 obs J2225-0457_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J2225-0457_S_2014_01_04_pus_uva.fits ! AN table 1: 40 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J2225-0457 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 3360 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2225-0457_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.889065Jy sigma=0.011490 ! Fit after self-cal, rms=0.879852Jy sigma=0.011314 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.626 mas, bmaj=5.821 mas, bpa=0.5299 degrees ! Estimated noise=1370.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.02182 Jy ! Component: 100 - total flux cleaned = 1.30483 Jy ! Total flux subtracted in 100 components = 1.30483 Jy ! Clean residual min=-0.195862 max=0.296681 Jy/beam ! Clean residual mean=0.000214 rms=0.058477 Jy/beam ! Combined flux in latest and established models = 1.30483 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.30483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.771873Jy sigma=0.010391 ! Fit after self-cal, rms=0.771911Jy sigma=0.010390 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.109 mas, bmaj=6.633 mas, bpa=1.061 degrees ! Estimated noise=1006.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.16474 Jy ! Component: 100 - total flux cleaned = 0.236982 Jy ! Component: 150 - total flux cleaned = 0.248495 Jy ! Component: 200 - total flux cleaned = 0.248511 Jy ! Total flux subtracted in 200 components = 0.248511 Jy ! Clean residual min=-0.229768 max=0.349909 Jy/beam ! Clean residual mean=0.000227 rms=0.083390 Jy/beam ! Combined flux in latest and established models = 1.55334 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 15 components and 1.55334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.721052Jy sigma=0.010294 ! Fit after self-cal, rms=0.721158Jy sigma=0.010293 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* KP 1.00* LA 0.81 ! MK 0.97 NL 0.83 OV 2.45 PT 0.84 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* KP 1.00* LA 0.81 ! MK 0.97 NL 0.91 OV 1.92 PT 0.85 ! SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* KP 1.00* LA 0.67 ! MK 1.01 NL 0.88 OV 1.87 PT 0.83 ! SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* KP 1.00* LA 0.73 ! MK 1.00 NL 1.00 OV 2.09 PT 0.87 ! SC 1.00 ! ! ! Fit before self-cal, rms=0.721158Jy sigma=0.010293 ! Fit after self-cal, rms=1.088931Jy sigma=0.007904 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.089 mas, bmaj=6.608 mas, bpa=0.2348 degrees ! Estimated noise=1021.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0414507 Jy ! Component: 100 - total flux cleaned = 0.0491394 Jy ! Component: 150 - total flux cleaned = 0.0517808 Jy ! Component: 200 - total flux cleaned = 0.0518078 Jy ! Total flux subtracted in 200 components = 0.0518078 Jy ! Clean residual min=-0.260740 max=0.201801 Jy/beam ! Clean residual mean=-0.000067 rms=0.063744 Jy/beam ! Combined flux in latest and established models = 1.60514 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 27 components and 1.60514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.082391Jy sigma=0.007898 ! Fit after self-cal, rms=1.082683Jy sigma=0.007893 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.082683Jy sigma=0.007893 ! Fit after self-cal, rms=1.728198Jy sigma=0.002603 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.088 mas, bmaj=6.594 mas, bpa=1.189 degrees ! Estimated noise=1014.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00118919 Jy ! Component: 100 - total flux cleaned = -0.00122731 Jy ! Component: 150 - total flux cleaned = -7.90885e-05 Jy ! Component: 200 - total flux cleaned = -6.54373e-05 Jy ! Total flux subtracted in 200 components = -6.54373e-05 Jy ! Clean residual min=-0.057830 max=0.081384 Jy/beam ! Clean residual mean=0.000075 rms=0.018334 Jy/beam ! Combined flux in latest and established models = 1.60508 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 32 components and 1.60508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.727820Jy sigma=0.002588 ! Fit after self-cal, rms=1.730793Jy sigma=0.002585 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-30, 83.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0798005 Jy ! Component: 100 - total flux cleaned = 0.123241 Jy ! Component: 150 - total flux cleaned = 0.151582 Jy ! Component: 200 - total flux cleaned = 0.173856 Jy ! Total flux subtracted in 200 components = 0.173856 Jy ! Clean residual min=-0.040383 max=0.038661 Jy/beam ! Clean residual mean=0.000026 rms=0.010421 Jy/beam ! Combined flux in latest and established models = 1.77894 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 94 components and 1.77894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.726899Jy sigma=0.001997 ! Fit after self-cal, rms=1.728109Jy sigma=0.001967 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.728109Jy sigma=0.001967 ! Fit after self-cal, rms=1.781493Jy sigma=0.001914 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.097 mas, bmaj=6.617 mas, bpa=1.218 degrees ! Estimated noise=1006.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0257321 Jy ! Component: 100 - total flux cleaned = 0.0416022 Jy ! Component: 150 - total flux cleaned = 0.0513719 Jy ! Component: 200 - total flux cleaned = 0.057922 Jy ! Total flux subtracted in 200 components = 0.057922 Jy ! Clean residual min=-0.029403 max=0.032921 Jy/beam ! Clean residual mean=-0.000007 rms=0.007935 Jy/beam ! Combined flux in latest and established models = 1.83686 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 124 components and 1.83686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.780715Jy sigma=0.001831 ! Fit after self-cal, rms=1.780673Jy sigma=0.001826 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00666241 Jy ! Component: 100 - total flux cleaned = 0.0122957 Jy ! Component: 150 - total flux cleaned = 0.016429 Jy ! Component: 200 - total flux cleaned = 0.0187821 Jy ! Total flux subtracted in 200 components = 0.0187821 Jy ! Clean residual min=-0.028220 max=0.033400 Jy/beam ! Clean residual mean=-0.000011 rms=0.007584 Jy/beam ! Combined flux in latest and established models = 1.85564 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 138 components and 1.85564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.780395Jy sigma=0.001809 ! Fit after self-cal, rms=1.780564Jy sigma=0.001808 ! Inverting map ! Added new window around map position (16.5, 35). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0311007 Jy ! Component: 100 - total flux cleaned = 0.0486383 Jy ! Component: 150 - total flux cleaned = 0.0595138 Jy ! Component: 200 - total flux cleaned = 0.0661055 Jy ! Total flux subtracted in 200 components = 0.0661055 Jy ! Clean residual min=-0.027501 max=0.022157 Jy/beam ! Clean residual mean=-0.000008 rms=0.005916 Jy/beam ! Combined flux in latest and established models = 1.92174 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 165 components and 1.92174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.779303Jy sigma=0.001713 ! Fit after self-cal, rms=1.779441Jy sigma=0.001703 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.779441Jy sigma=0.001703 ! Fit after self-cal, rms=1.778066Jy sigma=0.001695 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.476 mas, bmaj=12.59 mas, bpa=9.333 degrees ! Estimated noise=1224.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203299 Jy ! Component: 100 - total flux cleaned = 0.0317776 Jy ! Component: 150 - total flux cleaned = 0.037104 Jy ! Component: 200 - total flux cleaned = 0.0416151 Jy ! Total flux subtracted in 200 components = 0.0416151 Jy ! Clean residual min=-0.028574 max=0.023302 Jy/beam ! Clean residual mean=-0.000029 rms=0.007122 Jy/beam ! Combined flux in latest and established models = 1.96336 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 195 components and 1.96336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.777463Jy sigma=0.001687 ! Fit after self-cal, rms=1.777845Jy sigma=0.001681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00554388 Jy ! Component: 100 - total flux cleaned = 0.0100951 Jy ! Component: 150 - total flux cleaned = 0.0139464 Jy ! Component: 200 - total flux cleaned = 0.0172263 Jy ! Total flux subtracted in 200 components = 0.0172263 Jy ! Clean residual min=-0.027371 max=0.021092 Jy/beam ! Clean residual mean=-0.000027 rms=0.006646 Jy/beam ! Combined flux in latest and established models = 1.98059 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 210 components and 1.98059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.777678Jy sigma=0.001683 ! Fit after self-cal, rms=1.777722Jy sigma=0.001679 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.095 mas, bmaj=6.615 mas, bpa=1.164 degrees ! Estimated noise=1002.16 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.095 x 6.615 at 1.164 degrees (North through East) ! Clean map min=-0.023839 max=1.3862 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.777722Jy sigma=0.001679 ! Fit after self-cal, rms=2.860732Jy sigma=0.001147 ! Inverting map and beam ! Estimated beam: bmin=3.095 mas, bmaj=6.614 mas, bpa=1.043 degrees ! Estimated noise=1002.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00341424 Jy ! Component: 100 - total flux cleaned = 0.00308457 Jy ! Component: 150 - total flux cleaned = 0.00277433 Jy ! Component: 200 - total flux cleaned = 0.00336151 Jy ! Total flux subtracted in 200 components = 0.00336151 Jy ! Clean residual min=-0.022532 max=0.018557 Jy/beam ! Clean residual mean=-0.000011 rms=0.004829 Jy/beam ! Combined flux in latest and established models = 1.98395 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 226 components and 1.98395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.860250Jy sigma=0.001124 ! Fit after self-cal, rms=2.860106Jy sigma=0.001123 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00207879 Jy ! Component: 100 - total flux cleaned = 0.00283799 Jy ! Component: 150 - total flux cleaned = 0.00306108 Jy ! Component: 200 - total flux cleaned = 0.00349499 Jy ! Total flux subtracted in 200 components = 0.00349499 Jy ! Clean residual min=-0.021402 max=0.017668 Jy/beam ! Clean residual mean=-0.000010 rms=0.004757 Jy/beam ! Combined flux in latest and established models = 1.98744 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 230 components and 1.98744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.859861Jy sigma=0.001113 ! Fit after self-cal, rms=2.859830Jy sigma=0.001112 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.859830Jy sigma=0.001112 ! Fit after self-cal, rms=2.771956Jy sigma=0.001109 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.612 mas, bmaj=5.791 mas, bpa=0.2039 degrees ! Estimated noise=1357.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.01212 Jy ! Component: 100 - total flux cleaned = 1.29959 Jy ! Component: 150 - total flux cleaned = 1.44773 Jy ! Component: 200 - total flux cleaned = 1.52897 Jy ! Total flux subtracted in 200 components = 1.52897 Jy ! Clean residual min=-0.058141 max=0.054797 Jy/beam ! Clean residual mean=0.000048 rms=0.013595 Jy/beam ! Combined flux in latest and established models = 1.52897 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.52897 Jy ! Inverting map and beam ! Estimated beam: bmin=3.096 mas, bmaj=6.616 mas, bpa=0.978 degrees ! Estimated noise=1001.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0805131 Jy ! Component: 100 - total flux cleaned = 0.140304 Jy ! Component: 150 - total flux cleaned = 0.188237 Jy ! Component: 200 - total flux cleaned = 0.227926 Jy ! Total flux subtracted in 200 components = 0.227926 Jy ! Clean residual min=-0.042951 max=0.042328 Jy/beam ! Clean residual mean=0.000026 rms=0.011512 Jy/beam ! Combined flux in latest and established models = 1.7569 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 55 components and 1.7569 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.479 mas, bmaj=12.59 mas, bpa=9.209 degrees ! Estimated noise=1223.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0624122 Jy ! Component: 100 - total flux cleaned = 0.10539 Jy ! Component: 150 - total flux cleaned = 0.136686 Jy ! Component: 200 - total flux cleaned = 0.160606 Jy ! Total flux subtracted in 200 components = 0.160606 Jy ! Clean residual min=-0.035890 max=0.029252 Jy/beam ! Clean residual mean=-0.000014 rms=0.009749 Jy/beam ! Combined flux in latest and established models = 1.9175 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0185718 Jy ! Component: 100 - total flux cleaned = 0.0333129 Jy ! Component: 150 - total flux cleaned = 0.0452373 Jy ! Component: 200 - total flux cleaned = 0.0535108 Jy ! Total flux subtracted in 200 components = 0.0535108 Jy ! Clean residual min=-0.027274 max=0.022850 Jy/beam ! Clean residual mean=-0.000034 rms=0.007283 Jy/beam ! Combined flux in latest and established models = 1.97101 Jy ! Adding 95 model components to the UV plane model. ! The established model now contains 147 components and 1.97101 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.096 mas, bmaj=6.616 mas, bpa=0.978 degrees ! Estimated noise=1001.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00121538 Jy ! Component: 100 - total flux cleaned = -0.000670715 Jy ! Component: 150 - total flux cleaned = 0.00372784 Jy ! Component: 200 - total flux cleaned = 0.00531062 Jy ! Total flux subtracted in 200 components = 0.00531062 Jy ! Clean residual min=-0.025724 max=0.022582 Jy/beam ! Clean residual mean=-0.000007 rms=0.005673 Jy/beam ! Combined flux in latest and established models = 1.97632 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 162 components and 1.97632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.771920Jy sigma=0.001232 ! Fit after self-cal, rms=2.771727Jy sigma=0.001221 wmodel J2225-0457_S_2014_01_04_pus_map.mod ! Writing 162 model components to file: J2225-0457_S_2014_01_04_pus_map.mod wobs J2225-0457_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J2225-0457_S_2014_01_04_pus_uvs.fits wwins J2225-0457_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J2225-0457_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.010398 Jy ! Component: 100 - total flux cleaned = -0.00926067 Jy ! Component: 150 - total flux cleaned = -0.00780675 Jy ! Component: 200 - total flux cleaned = -0.00544003 Jy ! Component: 250 - total flux cleaned = -0.00258059 Jy ! Component: 300 - total flux cleaned = -0.00139035 Jy ! Component: 350 - total flux cleaned = 0.000306446 Jy ! Component: 400 - total flux cleaned = 0.00303354 Jy ! Component: 450 - total flux cleaned = 0.00619691 Jy ! Component: 500 - total flux cleaned = 0.00822337 Jy ! Component: 550 - total flux cleaned = 0.00994392 Jy ! Component: 600 - total flux cleaned = 0.011131 Jy ! Component: 650 - total flux cleaned = 0.0120502 Jy ! Component: 700 - total flux cleaned = 0.01272 Jy ! Component: 750 - total flux cleaned = 0.0138097 Jy ! Component: 800 - total flux cleaned = 0.0150683 Jy ! Component: 850 - total flux cleaned = 0.0152703 Jy ! Component: 900 - total flux cleaned = 0.0164621 Jy ! Component: 950 - total flux cleaned = 0.0180078 Jy ! Component: 1000 - total flux cleaned = 0.0191366 Jy ! Component: 1050 - total flux cleaned = 0.0206034 Jy ! Component: 1100 - total flux cleaned = 0.0211366 Jy ! Component: 1150 - total flux cleaned = 0.022005 Jy ! Component: 1200 - total flux cleaned = 0.0225159 Jy ! Component: 1250 - total flux cleaned = 0.0240056 Jy ! Component: 1300 - total flux cleaned = 0.0246453 Jy ! Component: 1350 - total flux cleaned = 0.0255911 Jy ! Component: 1400 - total flux cleaned = 0.0265114 Jy ! Component: 1450 - total flux cleaned = 0.0272582 Jy ! Component: 1500 - total flux cleaned = 0.0275526 Jy ! Component: 1550 - total flux cleaned = 0.0281303 Jy ! Component: 1600 - total flux cleaned = 0.0285568 Jy ! Component: 1650 - total flux cleaned = 0.0286932 Jy ! Component: 1700 - total flux cleaned = 0.0289634 Jy ! Component: 1750 - total flux cleaned = 0.0288292 Jy ! Component: 1800 - total flux cleaned = 0.0292212 Jy ! Component: 1850 - total flux cleaned = 0.0288395 Jy ! Component: 1900 - total flux cleaned = 0.0288399 Jy ! Component: 1950 - total flux cleaned = 0.0288393 Jy ! Component: 2000 - total flux cleaned = 0.0282298 Jy ! Component: 2050 - total flux cleaned = 0.0276321 Jy ! Component: 2100 - total flux cleaned = 0.0272809 Jy ! Component: 2150 - total flux cleaned = 0.0270509 Jy ! Component: 2200 - total flux cleaned = 0.0269375 Jy ! Component: 2250 - total flux cleaned = 0.0264858 Jy ! Component: 2300 - total flux cleaned = 0.0260412 Jy ! Component: 2350 - total flux cleaned = 0.0254944 Jy ! Component: 2400 - total flux cleaned = 0.0250665 Jy ! Component: 2450 - total flux cleaned = 0.0248548 Jy ! Component: 2500 - total flux cleaned = 0.0246455 Jy ! Component: 2550 - total flux cleaned = 0.0242312 Jy ! Component: 2600 - total flux cleaned = 0.0243341 Jy ! Component: 2650 - total flux cleaned = 0.0245355 Jy ! Component: 2700 - total flux cleaned = 0.0242373 Jy ! Component: 2750 - total flux cleaned = 0.0242372 Jy ! Component: 2800 - total flux cleaned = 0.0242379 Jy ! Component: 2850 - total flux cleaned = 0.0241425 Jy ! Component: 2900 - total flux cleaned = 0.0239529 Jy ! Component: 2950 - total flux cleaned = 0.0239522 Jy ! Component: 3000 - total flux cleaned = 0.0239511 Jy ! Component: 3050 - total flux cleaned = 0.0239495 Jy ! Component: 3100 - total flux cleaned = 0.0238572 Jy ! Component: 3150 - total flux cleaned = 0.0239455 Jy ! Component: 3200 - total flux cleaned = 0.0237674 Jy ! Component: 3250 - total flux cleaned = 0.0238551 Jy ! Component: 3300 - total flux cleaned = 0.023769 Jy ! Component: 3350 - total flux cleaned = 0.0239406 Jy ! Component: 3400 - total flux cleaned = 0.0237703 Jy ! Component: 3450 - total flux cleaned = 0.0241081 Jy ! Component: 3500 - total flux cleaned = 0.0240243 Jy ! Component: 3550 - total flux cleaned = 0.0242722 Jy ! Component: 3600 - total flux cleaned = 0.0242719 Jy ! Component: 3650 - total flux cleaned = 0.0246799 Jy ! Component: 3700 - total flux cleaned = 0.0246788 Jy ! Component: 3750 - total flux cleaned = 0.0245984 Jy ! Component: 3800 - total flux cleaned = 0.0246781 Jy ! Component: 3850 - total flux cleaned = 0.0249162 Jy ! Component: 3900 - total flux cleaned = 0.0247594 Jy ! Component: 3950 - total flux cleaned = 0.0248378 Jy ! Component: 4000 - total flux cleaned = 0.0247605 Jy ! Component: 4050 - total flux cleaned = 0.0247603 Jy ! Total flux subtracted in 4096 components = 0.0248366 Jy ! Clean residual min=-0.004273 max=0.004737 Jy/beam ! Clean residual mean=-0.000005 rms=0.001360 Jy/beam ! Combined flux in latest and established models = 2.00116 Jy keep ! Adding 274 model components to the UV plane model. ! The established model now contains 436 components and 2.00116 Jy ![Exited script file: muppet] wmap "J2225-0457_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.096 x 6.616 at 0.978 degrees (North through East) ! Clean map min=-0.012609 max=1.3644 Jy/beam ! Writing clean map to FITS file: J2225-0457_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.36436 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00133639 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.29385 0.29385 0.587699 1.1754 2.3508 4.70159 9.40318 18.8064 37.6127 75.2255 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.004 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.364 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.096 x 6.616 at 0.978 degrees (North through East) ! Clean map min=-0.012609 max=1.3644 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2225-0457_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:37:15 2017