! Started logfile: J2223-3455_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:36:26 2017 obs J2223-3455_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J2223-3455_S_2015_01_23_pus_uva.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.933333 visibilities/baseline/integration-bin. ! Found source: J2223-3455 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 2352 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2223-3455_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.808327Jy sigma=0.006219 ! Fit after self-cal, rms=0.796471Jy sigma=0.006154 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.386 mas, bmaj=6.811 mas, bpa=-6.523 degrees ! Estimated noise=2610.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.155105 Jy ! Component: 100 - total flux cleaned = 0.196818 Jy ! Total flux subtracted in 100 components = 0.196818 Jy ! Clean residual min=-0.017396 max=0.026514 Jy/beam ! Clean residual mean=-0.000071 rms=0.004820 Jy/beam ! Combined flux in latest and established models = 0.196818 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.196818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134578Jy sigma=0.000979 ! Fit after self-cal, rms=0.134521Jy sigma=0.000979 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.806 mas, bmaj=7.882 mas, bpa=-5.872 degrees ! Estimated noise=2043.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0341784 Jy ! Component: 100 - total flux cleaned = 0.0524443 Jy ! Component: 150 - total flux cleaned = 0.0628762 Jy ! Component: 200 - total flux cleaned = 0.0686597 Jy ! Total flux subtracted in 200 components = 0.0686597 Jy ! Clean residual min=-0.015690 max=0.022109 Jy/beam ! Clean residual mean=0.000042 rms=0.004987 Jy/beam ! Combined flux in latest and established models = 0.265478 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 26 components and 0.265478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127575Jy sigma=0.000892 ! Fit after self-cal, rms=0.127567Jy sigma=0.000892 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00* HN 1.43 KP 0.96 ! LA 1.06 MK 1.02 NL 1.23 OV 0.89 ! PT 1.09 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 1.70 KP 0.92 ! LA 1.06 MK 1.01 NL 1.15 OV 0.95 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 2.33 HN 1.54 KP 0.77 ! LA 0.89 MK 1.03 NL 1.19 OV 0.79 ! PT 0.97 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.35 KP 0.75 ! LA 0.90 MK 1.03 NL 1.02 OV 0.89 ! PT 1.03 SC 0.93 ! ! ! Fit before self-cal, rms=0.127567Jy sigma=0.000892 ! Fit after self-cal, rms=0.157718Jy sigma=0.000801 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.852 mas, bmaj=7.826 mas, bpa=-5.255 degrees ! Estimated noise=2085.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (27, 101.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128306 Jy ! Component: 100 - total flux cleaned = 0.017218 Jy ! Component: 150 - total flux cleaned = 0.0182181 Jy ! Component: 200 - total flux cleaned = 0.0186084 Jy ! Total flux subtracted in 200 components = 0.0186084 Jy ! Clean residual min=-0.008804 max=0.008734 Jy/beam ! Clean residual mean=0.000025 rms=0.002328 Jy/beam ! Combined flux in latest and established models = 0.284086 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 44 components and 0.284086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156397Jy sigma=0.000789 ! Fit after self-cal, rms=0.157477Jy sigma=0.000787 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157477Jy sigma=0.000787 ! Fit after self-cal, rms=0.153960Jy sigma=0.000785 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.827 mas, bmaj=7.766 mas, bpa=-5.103 degrees ! Estimated noise=2061.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00532548 Jy ! Component: 100 - total flux cleaned = 0.00668503 Jy ! Component: 150 - total flux cleaned = 0.00722487 Jy ! Component: 200 - total flux cleaned = 0.00730342 Jy ! Total flux subtracted in 200 components = 0.00730342 Jy ! Clean residual min=-0.008397 max=0.008590 Jy/beam ! Clean residual mean=0.000025 rms=0.002145 Jy/beam ! Combined flux in latest and established models = 0.291389 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 68 components and 0.29139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153642Jy sigma=0.000784 ! Fit after self-cal, rms=0.153539Jy sigma=0.000783 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125875 Jy ! Component: 100 - total flux cleaned = 0.00163204 Jy ! Component: 150 - total flux cleaned = 0.00169777 Jy ! Component: 200 - total flux cleaned = 0.00169873 Jy ! Total flux subtracted in 200 components = 0.00169873 Jy ! Clean residual min=-0.008184 max=0.008769 Jy/beam ! Clean residual mean=0.000021 rms=0.002133 Jy/beam ! Combined flux in latest and established models = 0.293088 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 82 components and 0.293088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153427Jy sigma=0.000783 ! Fit after self-cal, rms=0.153404Jy sigma=0.000783 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153404Jy sigma=0.000783 ! Fit after self-cal, rms=0.150543Jy sigma=0.000782 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.817 mas, bmaj=7.747 mas, bpa=-5.11 degrees ! Estimated noise=2051.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213281 Jy ! Component: 100 - total flux cleaned = 0.00281053 Jy ! Component: 150 - total flux cleaned = 0.00304241 Jy ! Component: 200 - total flux cleaned = 0.00304189 Jy ! Total flux subtracted in 200 components = 0.00304189 Jy ! Clean residual min=-0.008107 max=0.008423 Jy/beam ! Clean residual mean=0.000019 rms=0.002081 Jy/beam ! Combined flux in latest and established models = 0.29613 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 93 components and 0.29613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150439Jy sigma=0.000782 ! Fit after self-cal, rms=0.150398Jy sigma=0.000782 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000529977 Jy ! Component: 100 - total flux cleaned = 0.000795684 Jy ! Component: 150 - total flux cleaned = 0.000845513 Jy ! Component: 200 - total flux cleaned = 0.000801252 Jy ! Total flux subtracted in 200 components = 0.000801252 Jy ! Clean residual min=-0.008004 max=0.008466 Jy/beam ! Clean residual mean=0.000017 rms=0.002081 Jy/beam ! Combined flux in latest and established models = 0.296932 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 99 components and 0.296932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150335Jy sigma=0.000781 ! Fit after self-cal, rms=0.150330Jy sigma=0.000781 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150330Jy sigma=0.000781 ! Fit after self-cal, rms=0.149155Jy sigma=0.000781 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.84 mas, bmaj=22.49 mas, bpa=-1.374 degrees ! Estimated noise=2654.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00254129 Jy ! Component: 100 - total flux cleaned = 0.00232186 Jy ! Component: 150 - total flux cleaned = 0.00204756 Jy ! Component: 200 - total flux cleaned = 0.00181678 Jy ! Total flux subtracted in 200 components = 0.00181678 Jy ! Clean residual min=-0.009284 max=0.011686 Jy/beam ! Clean residual mean=0.000033 rms=0.003438 Jy/beam ! Combined flux in latest and established models = 0.298748 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 108 components and 0.298748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149167Jy sigma=0.000781 ! Fit after self-cal, rms=0.149173Jy sigma=0.000781 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0002482 Jy ! Component: 100 - total flux cleaned = 0.000118646 Jy ! Component: 150 - total flux cleaned = -6.09933e-05 Jy ! Component: 200 - total flux cleaned = -0.000175206 Jy ! Total flux subtracted in 200 components = -0.000175206 Jy ! Clean residual min=-0.008753 max=0.011659 Jy/beam ! Clean residual mean=0.000032 rms=0.003386 Jy/beam ! Combined flux in latest and established models = 0.298573 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 117 components and 0.298573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149201Jy sigma=0.000782 ! Fit after self-cal, rms=0.149212Jy sigma=0.000782 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.814 mas, bmaj=7.741 mas, bpa=-5.121 degrees ! Estimated noise=2048.13 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.814 x 7.741 at -5.121 degrees (North through East) ! Clean map min=-0.0070972 max=0.20004 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.362 mas, bmaj=6.581 mas, bpa=-5.615 degrees ! Estimated noise=2705.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.160496 Jy ! Component: 100 - total flux cleaned = 0.204375 Jy ! Component: 150 - total flux cleaned = 0.225804 Jy ! Component: 200 - total flux cleaned = 0.240547 Jy ! Total flux subtracted in 200 components = 0.240547 Jy ! Clean residual min=-0.010303 max=0.009003 Jy/beam ! Clean residual mean=-0.000006 rms=0.002625 Jy/beam ! Combined flux in latest and established models = 0.240547 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.240547 Jy ! Inverting map and beam ! Estimated beam: bmin=2.814 mas, bmaj=7.741 mas, bpa=-5.121 degrees ! Estimated noise=2048.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0167521 Jy ! Component: 100 - total flux cleaned = 0.0278328 Jy ! Component: 150 - total flux cleaned = 0.0355966 Jy ! Component: 200 - total flux cleaned = 0.0411823 Jy ! Total flux subtracted in 200 components = 0.0411823 Jy ! Clean residual min=-0.008644 max=0.008159 Jy/beam ! Clean residual mean=0.000003 rms=0.002234 Jy/beam ! Combined flux in latest and established models = 0.281729 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 72 components and 0.281729 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.84 mas, bmaj=22.49 mas, bpa=-1.374 degrees ! Estimated noise=2654.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00774974 Jy ! Component: 100 - total flux cleaned = 0.0119499 Jy ! Component: 150 - total flux cleaned = 0.0128323 Jy ! Component: 200 - total flux cleaned = 0.013011 Jy ! Total flux subtracted in 200 components = 0.013011 Jy ! Clean residual min=-0.008910 max=0.011879 Jy/beam ! Clean residual mean=0.000002 rms=0.003477 Jy/beam ! Combined flux in latest and established models = 0.29474 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.07726e-05 Jy ! Component: 100 - total flux cleaned = 8.04363e-05 Jy ! Component: 150 - total flux cleaned = 8.20376e-05 Jy ! Component: 200 - total flux cleaned = 8.57621e-05 Jy ! Total flux subtracted in 200 components = 8.57621e-05 Jy ! Clean residual min=-0.008486 max=0.011798 Jy/beam ! Clean residual mean=0.000005 rms=0.003412 Jy/beam ! Combined flux in latest and established models = 0.294826 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 90 components and 0.294825 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.814 mas, bmaj=7.741 mas, bpa=-5.121 degrees ! Estimated noise=2048.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000266919 Jy ! Component: 100 - total flux cleaned = 0.000256077 Jy ! Component: 150 - total flux cleaned = 0.000253905 Jy ! Component: 200 - total flux cleaned = 0.000252834 Jy ! Total flux subtracted in 200 components = 0.000252834 Jy ! Clean residual min=-0.007734 max=0.008828 Jy/beam ! Clean residual mean=0.000003 rms=0.002026 Jy/beam ! Combined flux in latest and established models = 0.295078 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 101 components and 0.295078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149054Jy sigma=0.000781 ! Fit after self-cal, rms=0.149018Jy sigma=0.000781 wmodel J2223-3455_S_2015_01_23_pus_map.mod ! Writing 101 model components to file: J2223-3455_S_2015_01_23_pus_map.mod wobs J2223-3455_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J2223-3455_S_2015_01_23_pus_uvs.fits wwins J2223-3455_S_2015_01_23_pus_map.win ! wwins: Wrote 2 windows to J2223-3455_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223472 Jy ! Component: 100 - total flux cleaned = 0.00237669 Jy ! Component: 150 - total flux cleaned = 0.00260617 Jy ! Component: 200 - total flux cleaned = 0.0029244 Jy ! Component: 250 - total flux cleaned = 0.00302162 Jy ! Component: 300 - total flux cleaned = 0.00311466 Jy ! Component: 350 - total flux cleaned = 0.00311503 Jy ! Component: 400 - total flux cleaned = 0.0032851 Jy ! Component: 450 - total flux cleaned = 0.00328287 Jy ! Component: 500 - total flux cleaned = 0.00320538 Jy ! Component: 550 - total flux cleaned = 0.00320676 Jy ! Component: 600 - total flux cleaned = 0.00298838 Jy ! Component: 650 - total flux cleaned = 0.00291972 Jy ! Component: 700 - total flux cleaned = 0.00292162 Jy ! Component: 750 - total flux cleaned = 0.0031217 Jy ! Component: 800 - total flux cleaned = 0.00305811 Jy ! Component: 850 - total flux cleaned = 0.00331325 Jy ! Component: 900 - total flux cleaned = 0.00331434 Jy ! Component: 950 - total flux cleaned = 0.00349615 Jy ! Component: 1000 - total flux cleaned = 0.0034955 Jy ! Component: 1050 - total flux cleaned = 0.00337918 Jy ! Component: 1100 - total flux cleaned = 0.0033794 Jy ! Component: 1150 - total flux cleaned = 0.0033238 Jy ! Component: 1200 - total flux cleaned = 0.00321403 Jy ! Component: 1250 - total flux cleaned = 0.00310716 Jy ! Component: 1300 - total flux cleaned = 0.00315896 Jy ! Component: 1350 - total flux cleaned = 0.00315822 Jy ! Component: 1400 - total flux cleaned = 0.00300597 Jy ! Component: 1450 - total flux cleaned = 0.00310609 Jy ! Component: 1500 - total flux cleaned = 0.00305725 Jy ! Component: 1550 - total flux cleaned = 0.00305649 Jy ! Component: 1600 - total flux cleaned = 0.00300941 Jy ! Component: 1650 - total flux cleaned = 0.00314995 Jy ! Component: 1700 - total flux cleaned = 0.00324169 Jy ! Component: 1750 - total flux cleaned = 0.00324095 Jy ! Component: 1800 - total flux cleaned = 0.00310609 Jy ! Component: 1850 - total flux cleaned = 0.00310668 Jy ! Component: 1900 - total flux cleaned = 0.00328215 Jy ! Component: 1950 - total flux cleaned = 0.00323988 Jy ! Component: 2000 - total flux cleaned = 0.00336773 Jy ! Component: 2050 - total flux cleaned = 0.00336789 Jy ! Component: 2100 - total flux cleaned = 0.00340972 Jy ! Component: 2150 - total flux cleaned = 0.00336902 Jy ! Component: 2200 - total flux cleaned = 0.00344982 Jy ! Component: 2250 - total flux cleaned = 0.00336943 Jy ! Component: 2300 - total flux cleaned = 0.00336988 Jy ! Component: 2350 - total flux cleaned = 0.00333093 Jy ! Component: 2400 - total flux cleaned = 0.00336983 Jy ! Component: 2450 - total flux cleaned = 0.00325523 Jy ! Component: 2500 - total flux cleaned = 0.00336873 Jy ! Component: 2550 - total flux cleaned = 0.00336879 Jy ! Component: 2600 - total flux cleaned = 0.00329494 Jy ! Component: 2650 - total flux cleaned = 0.00333154 Jy ! Component: 2700 - total flux cleaned = 0.00344028 Jy ! Component: 2750 - total flux cleaned = 0.00336847 Jy ! Component: 2800 - total flux cleaned = 0.00351057 Jy ! Component: 2850 - total flux cleaned = 0.00347512 Jy ! Component: 2900 - total flux cleaned = 0.00350966 Jy ! Component: 2950 - total flux cleaned = 0.00354421 Jy ! Component: 3000 - total flux cleaned = 0.00357811 Jy ! Component: 3050 - total flux cleaned = 0.00357782 Jy ! Component: 3100 - total flux cleaned = 0.0035441 Jy ! Component: 3150 - total flux cleaned = 0.00354433 Jy ! Component: 3200 - total flux cleaned = 0.00364351 Jy ! Component: 3250 - total flux cleaned = 0.00357767 Jy ! Component: 3300 - total flux cleaned = 0.00347984 Jy ! Component: 3350 - total flux cleaned = 0.00354488 Jy ! Component: 3400 - total flux cleaned = 0.00364151 Jy ! Component: 3450 - total flux cleaned = 0.00357708 Jy ! Component: 3500 - total flux cleaned = 0.00357709 Jy ! Component: 3550 - total flux cleaned = 0.00360869 Jy ! Component: 3600 - total flux cleaned = 0.00364035 Jy ! Component: 3650 - total flux cleaned = 0.00367195 Jy ! Component: 3700 - total flux cleaned = 0.0037344 Jy ! Component: 3750 - total flux cleaned = 0.00373434 Jy ! Component: 3800 - total flux cleaned = 0.00373416 Jy ! Component: 3850 - total flux cleaned = 0.00382639 Jy ! Component: 3900 - total flux cleaned = 0.00379572 Jy ! Component: 3950 - total flux cleaned = 0.00382615 Jy ! Component: 4000 - total flux cleaned = 0.00391744 Jy ! Component: 4050 - total flux cleaned = 0.00394768 Jy ! Total flux subtracted in 4096 components = 0.00391729 Jy ! Clean residual min=-0.001577 max=0.001588 Jy/beam ! Clean residual mean=-0.000007 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.298996 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 393 components and 0.298995 Jy ![Exited script file: muppet] wmap "J2223-3455_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.814 x 7.741 at -5.121 degrees (North through East) ! Clean map min=-0.0049866 max=0.20742 Jy/beam ! Writing clean map to FITS file: J2223-3455_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.207415 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000570615 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.825322 0.825322 1.65064 3.30129 6.60258 13.2052 26.4103 52.8206 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.207 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.814 x 7.741 at -5.121 degrees (North through East) ! Clean map min=-0.0049866 max=0.20742 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2223-3455_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:36:30 2017