! Started logfile: J2219-2719_S_2014_05_31_pus_uvs.log on Mon Nov 28 15:38:55 2016 obs J2219-2719_S_2014_05_31_pus_uva.fits ! Reading UV FITS file: J2219-2719_S_2014_05_31_pus_uva.fits ! AN table 1: 121 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.98641 visibilities/baseline/integration-bin. ! Found source: J2219-2719 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 21484 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2219-2719_S_2014_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.881933Jy sigma=0.008140 ! Fit after self-cal, rms=0.859439Jy sigma=0.007921 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.361 mas, bmaj=6.575 mas, bpa=-3.865 degrees ! Estimated noise=985.809 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104237 Jy ! Component: 100 - total flux cleaned = 0.146656 Jy ! Total flux subtracted in 100 components = 0.146656 Jy ! Clean residual min=-0.008986 max=0.019858 Jy/beam ! Clean residual mean=-0.000074 rms=0.002315 Jy/beam ! Combined flux in latest and established models = 0.146656 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.146656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103729Jy sigma=0.000894 ! Fit after self-cal, rms=0.103396Jy sigma=0.000892 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0234715 Jy ! Component: 100 - total flux cleaned = 0.0363945 Jy ! Total flux subtracted in 100 components = 0.0363945 Jy ! Clean residual min=-0.005051 max=0.008796 Jy/beam ! Clean residual mean=-0.000041 rms=0.001396 Jy/beam ! Combined flux in latest and established models = 0.18305 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 15 components and 0.18305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097106Jy sigma=0.000818 ! Fit after self-cal, rms=0.097039Jy sigma=0.000818 ! Inverting map ! Added new window around map position (-4, -6.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00902976 Jy ! Component: 100 - total flux cleaned = 0.0148101 Jy ! Total flux subtracted in 100 components = 0.0148101 Jy ! Clean residual min=-0.004526 max=0.007504 Jy/beam ! Clean residual mean=-0.000027 rms=0.001174 Jy/beam ! Combined flux in latest and established models = 0.19786 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 27 components and 0.19786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096099Jy sigma=0.000808 ! Fit after self-cal, rms=0.096074Jy sigma=0.000807 ! Inverting map ! Added new window around map position (4.5, -2.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00690065 Jy ! Component: 100 - total flux cleaned = 0.0109329 Jy ! Total flux subtracted in 100 components = 0.0109329 Jy ! Clean residual min=-0.004264 max=0.005393 Jy/beam ! Clean residual mean=-0.000016 rms=0.001062 Jy/beam ! Combined flux in latest and established models = 0.208793 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 40 components and 0.208793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095511Jy sigma=0.000803 ! Fit after self-cal, rms=0.095467Jy sigma=0.000803 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.03 mas, bmaj=7.971 mas, bpa=-4.948 degrees ! Estimated noise=530.973 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (25, -10.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00620313 Jy ! Component: 100 - total flux cleaned = 0.0099172 Jy ! Component: 150 - total flux cleaned = 0.0126122 Jy ! Component: 200 - total flux cleaned = 0.0141427 Jy ! Total flux subtracted in 200 components = 0.0141427 Jy ! Clean residual min=-0.003007 max=0.004249 Jy/beam ! Clean residual mean=-0.000018 rms=0.000883 Jy/beam ! Combined flux in latest and established models = 0.222936 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 93 components and 0.222936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094981Jy sigma=0.000798 ! Fit after self-cal, rms=0.094946Jy sigma=0.000798 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.84 HN 1.14 KP 1.04 ! LA 1.13 MK 0.96 NL 0.95 OV 0.97 ! PT 1.01 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 1.19 KP 1.03 ! LA 1.12 MK 1.00 NL 1.01 OV 1.00 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.14 HN 1.21 KP 0.92 ! LA 0.89 MK 1.04 NL 0.96 OV 0.93 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.03 HN 1.11 KP 0.90 ! LA 0.87 MK 1.01 NL 1.03 OV 0.99 ! PT 1.01 SC 1.00 ! ! ! Fit before self-cal, rms=0.094946Jy sigma=0.000798 ! Fit after self-cal, rms=0.096307Jy sigma=0.000782 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.045 mas, bmaj=7.945 mas, bpa=-4.753 degrees ! Estimated noise=534.869 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0034636 Jy ! Component: 100 - total flux cleaned = 0.00451448 Jy ! Component: 150 - total flux cleaned = 0.00544107 Jy ! Component: 200 - total flux cleaned = 0.00613313 Jy ! Total flux subtracted in 200 components = 0.00613313 Jy ! Clean residual min=-0.002229 max=0.002883 Jy/beam ! Clean residual mean=-0.000010 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.229069 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 118 components and 0.229069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096101Jy sigma=0.000780 ! Fit after self-cal, rms=0.096128Jy sigma=0.000780 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096128Jy sigma=0.000780 ! Fit after self-cal, rms=0.098088Jy sigma=0.000777 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.049 mas, bmaj=7.95 mas, bpa=-4.897 degrees ! Estimated noise=534.401 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.40487e-06 Jy ! Component: 100 - total flux cleaned = 0.000603014 Jy ! Component: 150 - total flux cleaned = 0.000922688 Jy ! Component: 200 - total flux cleaned = 0.00107862 Jy ! Total flux subtracted in 200 components = 0.00107862 Jy ! Clean residual min=-0.001786 max=0.001703 Jy/beam ! Clean residual mean=-0.000008 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.230148 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 144 components and 0.230148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098054Jy sigma=0.000777 ! Fit after self-cal, rms=0.098084Jy sigma=0.000777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000171394 Jy ! Component: 100 - total flux cleaned = 0.000434501 Jy ! Component: 150 - total flux cleaned = 0.000593531 Jy ! Component: 200 - total flux cleaned = 0.000739453 Jy ! Total flux subtracted in 200 components = 0.000739453 Jy ! Clean residual min=-0.001686 max=0.001673 Jy/beam ! Clean residual mean=-0.000007 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.230887 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 159 components and 0.230887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098068Jy sigma=0.000777 ! Fit after self-cal, rms=0.098066Jy sigma=0.000777 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098066Jy sigma=0.000777 ! Fit after self-cal, rms=0.099815Jy sigma=0.000776 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.049 mas, bmaj=7.939 mas, bpa=-4.916 degrees ! Estimated noise=533.714 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000459318 Jy ! Component: 100 - total flux cleaned = -0.000407248 Jy ! Component: 150 - total flux cleaned = -0.000313928 Jy ! Component: 200 - total flux cleaned = -0.000313126 Jy ! Total flux subtracted in 200 components = -0.000313126 Jy ! Clean residual min=-0.001637 max=0.001547 Jy/beam ! Clean residual mean=-0.000008 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.230574 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 180 components and 0.230574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099800Jy sigma=0.000776 ! Fit after self-cal, rms=0.099822Jy sigma=0.000776 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.96551e-05 Jy ! Component: 100 - total flux cleaned = 8.79078e-05 Jy ! Component: 150 - total flux cleaned = 0.000104916 Jy ! Component: 200 - total flux cleaned = 0.000121368 Jy ! Total flux subtracted in 200 components = 0.000121368 Jy ! Clean residual min=-0.001646 max=0.001547 Jy/beam ! Clean residual mean=-0.000008 rms=0.000411 Jy/beam ! Combined flux in latest and established models = 0.230695 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 193 components and 0.230695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099816Jy sigma=0.000776 ! Fit after self-cal, rms=0.099815Jy sigma=0.000776 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099815Jy sigma=0.000776 ! Fit after self-cal, rms=0.100222Jy sigma=0.000776 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.948 mas, bmaj=19.51 mas, bpa=1.179 degrees ! Estimated noise=658.625 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000194615 Jy ! Component: 100 - total flux cleaned = -7.07323e-05 Jy ! Component: 150 - total flux cleaned = -7.66741e-06 Jy ! Component: 200 - total flux cleaned = 3.34395e-05 Jy ! Total flux subtracted in 200 components = 3.34395e-05 Jy ! Clean residual min=-0.001636 max=0.001947 Jy/beam ! Clean residual mean=-0.000015 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.230729 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 203 components and 0.230729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100218Jy sigma=0.000776 ! Fit after self-cal, rms=0.100222Jy sigma=0.000776 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.32044e-05 Jy ! Component: 100 - total flux cleaned = 0.000126647 Jy ! Component: 150 - total flux cleaned = 0.000139532 Jy ! Component: 200 - total flux cleaned = 0.000151559 Jy ! Total flux subtracted in 200 components = 0.000151559 Jy ! Clean residual min=-0.001604 max=0.001939 Jy/beam ! Clean residual mean=-0.000015 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.23088 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 205 components and 0.23088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100221Jy sigma=0.000776 ! Fit after self-cal, rms=0.100220Jy sigma=0.000776 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.048 mas, bmaj=7.93 mas, bpa=-4.877 degrees ! Estimated noise=533.277 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.048 x 7.93 at -4.877 degrees (North through East) ! Clean map min=-0.0015578 max=0.14065 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.37 mas, bmaj=6.53 mas, bpa=-3.64 degrees ! Estimated noise=988.058 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104449 Jy ! Component: 100 - total flux cleaned = 0.148003 Jy ! Component: 150 - total flux cleaned = 0.170584 Jy ! Component: 200 - total flux cleaned = 0.183114 Jy ! Total flux subtracted in 200 components = 0.183114 Jy ! Clean residual min=-0.004331 max=0.006425 Jy/beam ! Clean residual mean=-0.000041 rms=0.001096 Jy/beam ! Combined flux in latest and established models = 0.183114 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.183114 Jy ! Inverting map and beam ! Estimated beam: bmin=3.048 mas, bmaj=7.93 mas, bpa=-4.877 degrees ! Estimated noise=533.277 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107327 Jy ! Component: 100 - total flux cleaned = 0.0177311 Jy ! Component: 150 - total flux cleaned = 0.0230176 Jy ! Component: 200 - total flux cleaned = 0.0271234 Jy ! Total flux subtracted in 200 components = 0.0271234 Jy ! Clean residual min=-0.002168 max=0.002720 Jy/beam ! Clean residual mean=-0.000039 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.210237 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 83 components and 0.210237 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.948 mas, bmaj=19.51 mas, bpa=1.179 degrees ! Estimated noise=658.625 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0056813 Jy ! Component: 100 - total flux cleaned = 0.00952237 Jy ! Component: 150 - total flux cleaned = 0.0122509 Jy ! Component: 200 - total flux cleaned = 0.01423 Jy ! Total flux subtracted in 200 components = 0.01423 Jy ! Clean residual min=-0.001617 max=0.001718 Jy/beam ! Clean residual mean=-0.000035 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.224467 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146837 Jy ! Component: 100 - total flux cleaned = 0.00259185 Jy ! Component: 150 - total flux cleaned = 0.00346564 Jy ! Component: 200 - total flux cleaned = 0.00415085 Jy ! Total flux subtracted in 200 components = 0.00415085 Jy ! Clean residual min=-0.001469 max=0.001780 Jy/beam ! Clean residual mean=-0.000022 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.228618 Jy ! Adding 113 model components to the UV plane model. ! The established model now contains 188 components and 0.228618 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.048 mas, bmaj=7.93 mas, bpa=-4.877 degrees ! Estimated noise=533.277 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000166896 Jy ! Component: 100 - total flux cleaned = 0.000400074 Jy ! Component: 150 - total flux cleaned = 0.000543893 Jy ! Component: 200 - total flux cleaned = 0.000645813 Jy ! Total flux subtracted in 200 components = 0.000645813 Jy ! Clean residual min=-0.001542 max=0.001551 Jy/beam ! Clean residual mean=-0.000010 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.229264 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 208 components and 0.229264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100245Jy sigma=0.000776 ! Fit after self-cal, rms=0.100235Jy sigma=0.000776 wmodel J2219-2719_S_2014_05_31_pus_map.mod ! Writing 208 model components to file: J2219-2719_S_2014_05_31_pus_map.mod wobs J2219-2719_S_2014_05_31_pus_uvs.fits ! Writing UV FITS file: J2219-2719_S_2014_05_31_pus_uvs.fits wwins J2219-2719_S_2014_05_31_pus_map.win ! wwins: Wrote 5 windows to J2219-2719_S_2014_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000116096 Jy ! Component: 100 - total flux cleaned = -3.70125e-05 Jy ! Component: 150 - total flux cleaned = -3.63485e-05 Jy ! Component: 200 - total flux cleaned = -6.05337e-05 Jy ! Component: 250 - total flux cleaned = -0.000108063 Jy ! Component: 300 - total flux cleaned = -0.000200425 Jy ! Component: 350 - total flux cleaned = -0.000178393 Jy ! Component: 400 - total flux cleaned = -0.000178739 Jy ! Component: 450 - total flux cleaned = -0.000135558 Jy ! Component: 500 - total flux cleaned = -0.000156969 Jy ! Component: 550 - total flux cleaned = -0.000156638 Jy ! Component: 600 - total flux cleaned = -0.000198054 Jy ! Component: 650 - total flux cleaned = -0.000238529 Jy ! Component: 700 - total flux cleaned = -0.000298098 Jy ! Component: 750 - total flux cleaned = -0.000356748 Jy ! Component: 800 - total flux cleaned = -0.000395086 Jy ! Component: 850 - total flux cleaned = -0.000414203 Jy ! Component: 900 - total flux cleaned = -0.000432966 Jy ! Component: 950 - total flux cleaned = -0.000488469 Jy ! Component: 1000 - total flux cleaned = -0.000506484 Jy ! Component: 1050 - total flux cleaned = -0.000506481 Jy ! Component: 1100 - total flux cleaned = -0.000541974 Jy ! Component: 1150 - total flux cleaned = -0.00055927 Jy ! Component: 1200 - total flux cleaned = -0.000542373 Jy ! Component: 1250 - total flux cleaned = -0.000559447 Jy ! Component: 1300 - total flux cleaned = -0.000508802 Jy ! Component: 1350 - total flux cleaned = -0.000525539 Jy ! Component: 1400 - total flux cleaned = -0.000475547 Jy ! Component: 1450 - total flux cleaned = -0.000475732 Jy ! Component: 1500 - total flux cleaned = -0.000508228 Jy ! Component: 1550 - total flux cleaned = -0.00042764 Jy ! Component: 1600 - total flux cleaned = -0.000507299 Jy ! Component: 1650 - total flux cleaned = -0.000428332 Jy ! Component: 1700 - total flux cleaned = -0.000412906 Jy ! Component: 1750 - total flux cleaned = -0.000335864 Jy ! Component: 1800 - total flux cleaned = -0.000397374 Jy ! Component: 1850 - total flux cleaned = -0.000397488 Jy ! Component: 1900 - total flux cleaned = -0.000457605 Jy ! Component: 1950 - total flux cleaned = -0.000457483 Jy ! Component: 2000 - total flux cleaned = -0.000413199 Jy ! Component: 2050 - total flux cleaned = -0.000442591 Jy ! Component: 2100 - total flux cleaned = -0.000442578 Jy ! Component: 2150 - total flux cleaned = -0.000457112 Jy ! Component: 2200 - total flux cleaned = -0.000414186 Jy ! Component: 2250 - total flux cleaned = -0.000428598 Jy ! Component: 2300 - total flux cleaned = -0.000456775 Jy ! Component: 2350 - total flux cleaned = -0.000484829 Jy ! Component: 2400 - total flux cleaned = -0.00045713 Jy ! Component: 2450 - total flux cleaned = -0.00044344 Jy ! Component: 2500 - total flux cleaned = -0.000484305 Jy ! Component: 2550 - total flux cleaned = -0.000470644 Jy ! Component: 2600 - total flux cleaned = -0.000497622 Jy ! Component: 2650 - total flux cleaned = -0.000470803 Jy ! Component: 2700 - total flux cleaned = -0.000444072 Jy ! Component: 2750 - total flux cleaned = -0.000496811 Jy ! Component: 2800 - total flux cleaned = -0.000418065 Jy ! Component: 2850 - total flux cleaned = -0.000431133 Jy ! Component: 2900 - total flux cleaned = -0.000444016 Jy ! Component: 2950 - total flux cleaned = -0.000443958 Jy ! Component: 3000 - total flux cleaned = -0.000469299 Jy ! Component: 3050 - total flux cleaned = -0.000418629 Jy ! Component: 3100 - total flux cleaned = -0.000431146 Jy ! Component: 3150 - total flux cleaned = -0.000443527 Jy ! Component: 3200 - total flux cleaned = -0.000431159 Jy ! Component: 3250 - total flux cleaned = -0.000431283 Jy ! Component: 3300 - total flux cleaned = -0.000431268 Jy ! Component: 3350 - total flux cleaned = -0.000431158 Jy ! Component: 3400 - total flux cleaned = -0.00043116 Jy ! Component: 3450 - total flux cleaned = -0.000395089 Jy ! Component: 3500 - total flux cleaned = -0.000407057 Jy ! Component: 3550 - total flux cleaned = -0.000395315 Jy ! Component: 3600 - total flux cleaned = -0.000395437 Jy ! Component: 3650 - total flux cleaned = -0.000430373 Jy ! Component: 3700 - total flux cleaned = -0.000372151 Jy ! Component: 3750 - total flux cleaned = -0.00037207 Jy ! Component: 3800 - total flux cleaned = -0.000383664 Jy ! Component: 3850 - total flux cleaned = -0.000383606 Jy ! Component: 3900 - total flux cleaned = -0.000394919 Jy ! Component: 3950 - total flux cleaned = -0.00044018 Jy ! Component: 4000 - total flux cleaned = -0.000406451 Jy ! Component: 4050 - total flux cleaned = -0.000439945 Jy ! Total flux subtracted in 4096 components = -0.000428865 Jy ! Clean residual min=-0.000645 max=0.000755 Jy/beam ! Clean residual mean=-0.000000 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.228835 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 506 components and 0.228835 Jy ![Exited script file: muppet] wmap "J2219-2719_S_2014_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.048 x 7.93 at -4.877 degrees (North through East) ! Clean map min=-0.0011413 max=0.14224 Jy/beam ! Writing clean map to FITS file: J2219-2719_S_2014_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.142243 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00020257 device "J2219-2719_S_2014_05_31_pus\_map.eps/VPS" ! Attempting to open device: 'J2219-2719_S_2014_05_31_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.427235 0.427235 0.85447 1.70894 3.41788 6.83576 13.6715 27.343 54.6861 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.142 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.048 x 7.93 at -4.877 degrees (North through East) ! Clean map min=-0.0011413 max=0.14224 Jy/beam quit ! Quitting program ! Log file J2219-2719_S_2014_05_31_pus_uvs.log closed on Mon Nov 28 15:39:01 2016