! Started logfile: J2212+2759_S_2015_03_17_pus_uvs.log on Fri Dec 30 23:11:31 2016 obs J2212+2759_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J2212+2759_S_2015_03_17_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.975956 visibilities/baseline/integration-bin. ! Found source: J2212+2759 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 21432 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2212+2759_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.949160Jy sigma=0.011118 ! Fit after self-cal, rms=0.888971Jy sigma=0.010460 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.111 mas, bmaj=4.918 mas, bpa=-6.988 degrees ! Estimated noise=708.779 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0805382 Jy ! Component: 100 - total flux cleaned = 0.102767 Jy ! Total flux subtracted in 100 components = 0.102767 Jy ! Clean residual min=-0.004992 max=0.010754 Jy/beam ! Clean residual mean=-0.000014 rms=0.001339 Jy/beam ! Combined flux in latest and established models = 0.102767 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.102767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078893Jy sigma=0.000830 ! Fit after self-cal, rms=0.078843Jy sigma=0.000830 ! Inverting map ! Added new window around map position (1, -10). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120773 Jy ! Component: 100 - total flux cleaned = 0.0202371 Jy ! Total flux subtracted in 100 components = 0.0202371 Jy ! Clean residual min=-0.003798 max=0.004966 Jy/beam ! Clean residual mean=-0.000009 rms=0.001007 Jy/beam ! Combined flux in latest and established models = 0.123005 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 31 components and 0.123005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075714Jy sigma=0.000798 ! Fit after self-cal, rms=0.075627Jy sigma=0.000797 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.823 mas, bmaj=5.846 mas, bpa=-5.958 degrees ! Estimated noise=420.653 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00939038 Jy ! Component: 100 - total flux cleaned = 0.0155979 Jy ! Component: 150 - total flux cleaned = 0.0201885 Jy ! Component: 200 - total flux cleaned = 0.0237151 Jy ! Total flux subtracted in 200 components = 0.0237151 Jy ! Clean residual min=-0.003649 max=0.003136 Jy/beam ! Clean residual mean=-0.000013 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 0.14672 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 88 components and 0.14672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073836Jy sigma=0.000782 ! Fit after self-cal, rms=0.073781Jy sigma=0.000782 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.85 HN 0.93 KP 1.09 ! LA 0.95 MK 1.10 NL 0.90 OV 1.00 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.89 HN 1.00 KP 1.03 ! LA 0.95 MK 1.08 NL 1.04 OV 1.01 ! PT 1.05 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.91 HN 1.00 KP 0.96 ! LA 0.77 MK 1.13 NL 1.11 OV 0.95 ! PT 1.01 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.91 HN 0.97 KP 0.92 ! LA 0.85 MK 1.13 NL 1.00 OV 1.01 ! PT 1.07 SC 0.98 ! ! ! Fit before self-cal, rms=0.073781Jy sigma=0.000782 ! Fit after self-cal, rms=0.069289Jy sigma=0.000769 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.921 mas, bmaj=5.951 mas, bpa=-4.756 degrees ! Estimated noise=417.745 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126372 Jy ! Component: 100 - total flux cleaned = 0.00160988 Jy ! Component: 150 - total flux cleaned = 0.00196645 Jy ! Component: 200 - total flux cleaned = 0.00222075 Jy ! Total flux subtracted in 200 components = 0.00222075 Jy ! Clean residual min=-0.001736 max=0.001813 Jy/beam ! Clean residual mean=0.000002 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.14894 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 103 components and 0.14894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069204Jy sigma=0.000768 ! Fit after self-cal, rms=0.069142Jy sigma=0.000767 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069142Jy sigma=0.000767 ! Fit after self-cal, rms=0.068856Jy sigma=0.000765 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.909 mas, bmaj=5.937 mas, bpa=-5.942 degrees ! Estimated noise=416.501 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000669936 Jy ! Component: 100 - total flux cleaned = 0.000564572 Jy ! Component: 150 - total flux cleaned = 0.000542772 Jy ! Component: 200 - total flux cleaned = 0.000580254 Jy ! Total flux subtracted in 200 components = 0.000580254 Jy ! Clean residual min=-0.001248 max=0.001535 Jy/beam ! Clean residual mean=0.000001 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 0.149521 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 114 components and 0.149521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068834Jy sigma=0.000765 ! Fit after self-cal, rms=0.068845Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (47, 51). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109906 Jy ! Component: 100 - total flux cleaned = 0.00117876 Jy ! Component: 150 - total flux cleaned = 0.0012913 Jy ! Component: 200 - total flux cleaned = 0.00140911 Jy ! Total flux subtracted in 200 components = 0.00140911 Jy ! Clean residual min=-0.001241 max=0.001335 Jy/beam ! Clean residual mean=0.000000 rms=0.000311 Jy/beam ! Combined flux in latest and established models = 0.15093 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 136 components and 0.15093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068817Jy sigma=0.000765 ! Fit after self-cal, rms=0.068815Jy sigma=0.000765 ! Inverting map ! Added new window around map position (-95, -34). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000534035 Jy ! Component: 100 - total flux cleaned = 0.000754172 Jy ! Component: 150 - total flux cleaned = 0.000958378 Jy ! Component: 200 - total flux cleaned = 0.00104311 Jy ! Total flux subtracted in 200 components = 0.00104311 Jy ! Clean residual min=-0.001108 max=0.001290 Jy/beam ! Clean residual mean=0.000001 rms=0.000294 Jy/beam ! Combined flux in latest and established models = 0.151973 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 156 components and 0.151973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068781Jy sigma=0.000764 ! Fit after self-cal, rms=0.068778Jy sigma=0.000764 ! Inverting map ! Added new window around map position (120.5, -69). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000597951 Jy ! Component: 100 - total flux cleaned = 0.000891596 Jy ! Component: 150 - total flux cleaned = 0.00104883 Jy ! Component: 200 - total flux cleaned = 0.00113312 Jy ! Total flux subtracted in 200 components = 0.00113312 Jy ! Clean residual min=-0.001072 max=0.001034 Jy/beam ! Clean residual mean=0.000000 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.153106 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 172 components and 0.153106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068752Jy sigma=0.000764 ! Fit after self-cal, rms=0.068751Jy sigma=0.000764 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068751Jy sigma=0.000764 ! Fit after self-cal, rms=0.068720Jy sigma=0.000764 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.91 mas, bmaj=5.931 mas, bpa=-6.053 degrees ! Estimated noise=416.057 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000298763 Jy ! Component: 100 - total flux cleaned = 0.000448241 Jy ! Component: 150 - total flux cleaned = 0.000507876 Jy ! Component: 200 - total flux cleaned = 0.000564268 Jy ! Total flux subtracted in 200 components = 0.000564268 Jy ! Clean residual min=-0.001024 max=0.001034 Jy/beam ! Clean residual mean=0.000000 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 0.15367 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 179 components and 0.15367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068708Jy sigma=0.000764 ! Fit after self-cal, rms=0.068709Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.58935e-05 Jy ! Component: 100 - total flux cleaned = 0.000149076 Jy ! Component: 150 - total flux cleaned = 0.000199744 Jy ! Component: 200 - total flux cleaned = 0.000248632 Jy ! Total flux subtracted in 200 components = 0.000248632 Jy ! Clean residual min=-0.001016 max=0.001022 Jy/beam ! Clean residual mean=0.000000 rms=0.000270 Jy/beam ! Combined flux in latest and established models = 0.153919 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 184 components and 0.153919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068701Jy sigma=0.000764 ! Fit after self-cal, rms=0.068701Jy sigma=0.000764 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068701Jy sigma=0.000764 ! Fit after self-cal, rms=0.068707Jy sigma=0.000764 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.549 mas, bmaj=9.594 mas, bpa=-1.31 degrees ! Estimated noise=508.115 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000408509 Jy ! Component: 100 - total flux cleaned = 0.000565622 Jy ! Component: 150 - total flux cleaned = 0.000641353 Jy ! Component: 200 - total flux cleaned = 0.000709416 Jy ! Total flux subtracted in 200 components = 0.000709416 Jy ! Clean residual min=-0.001135 max=0.001119 Jy/beam ! Clean residual mean=0.000001 rms=0.000304 Jy/beam ! Combined flux in latest and established models = 0.154628 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 202 components and 0.154628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068701Jy sigma=0.000764 ! Fit after self-cal, rms=0.068701Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.10349e-05 Jy ! Component: 100 - total flux cleaned = 0.000155966 Jy ! Component: 150 - total flux cleaned = 0.000178873 Jy ! Component: 200 - total flux cleaned = 0.000200927 Jy ! Total flux subtracted in 200 components = 0.000200927 Jy ! Clean residual min=-0.001118 max=0.001113 Jy/beam ! Clean residual mean=0.000001 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.154829 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 215 components and 0.154829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068699Jy sigma=0.000764 ! Fit after self-cal, rms=0.068699Jy sigma=0.000764 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.909 mas, bmaj=5.928 mas, bpa=-6.091 degrees ! Estimated noise=416.043 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.909 x 5.928 at -6.091 degrees (North through East) ! Clean map min=-0.0016022 max=0.10576 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.177 mas, bmaj=4.978 mas, bpa=-7.297 degrees ! Estimated noise=709.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.080259 Jy ! Component: 100 - total flux cleaned = 0.102553 Jy ! Component: 150 - total flux cleaned = 0.11415 Jy ! Component: 200 - total flux cleaned = 0.121691 Jy ! Total flux subtracted in 200 components = 0.121691 Jy ! Clean residual min=-0.002387 max=0.004171 Jy/beam ! Clean residual mean=-0.000005 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.121691 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.121691 Jy ! Inverting map and beam ! Estimated beam: bmin=3.909 mas, bmaj=5.928 mas, bpa=-6.091 degrees ! Estimated noise=416.043 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00795757 Jy ! Component: 100 - total flux cleaned = 0.0130949 Jy ! Component: 150 - total flux cleaned = 0.0167107 Jy ! Component: 200 - total flux cleaned = 0.0194384 Jy ! Total flux subtracted in 200 components = 0.0194384 Jy ! Clean residual min=-0.001689 max=0.001827 Jy/beam ! Clean residual mean=-0.000004 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.141129 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 94 components and 0.141129 Jy ! Inverting map ! Added new window around map position (-2, -16). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00222254 Jy ! Component: 100 - total flux cleaned = 0.00407268 Jy ! Component: 150 - total flux cleaned = 0.00565825 Jy ! Component: 200 - total flux cleaned = 0.00665372 Jy ! Total flux subtracted in 200 components = 0.00665372 Jy ! Clean residual min=-0.001422 max=0.001182 Jy/beam ! Clean residual mean=-0.000002 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.147783 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 129 components and 0.147783 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.549 mas, bmaj=9.594 mas, bpa=-1.31 degrees ! Estimated noise=508.115 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184841 Jy ! Component: 100 - total flux cleaned = 0.00316486 Jy ! Component: 150 - total flux cleaned = 0.00392633 Jy ! Component: 200 - total flux cleaned = 0.00457733 Jy ! Total flux subtracted in 200 components = 0.00457733 Jy ! Clean residual min=-0.001292 max=0.001123 Jy/beam ! Clean residual mean=-0.000001 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 0.15236 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000438619 Jy ! Component: 100 - total flux cleaned = 0.000798533 Jy ! Component: 150 - total flux cleaned = 0.00114697 Jy ! Component: 200 - total flux cleaned = 0.00143995 Jy ! Total flux subtracted in 200 components = 0.00143995 Jy ! Clean residual min=-0.001204 max=0.001068 Jy/beam ! Clean residual mean=-0.000000 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.1538 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 197 components and 0.1538 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.909 mas, bmaj=5.928 mas, bpa=-6.091 degrees ! Estimated noise=416.043 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.93685e-05 Jy ! Component: 100 - total flux cleaned = 0.000193074 Jy ! Component: 150 - total flux cleaned = 0.000241259 Jy ! Component: 200 - total flux cleaned = 0.000309518 Jy ! Total flux subtracted in 200 components = 0.000309518 Jy ! Clean residual min=-0.001026 max=0.000970 Jy/beam ! Clean residual mean=-0.000000 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.15411 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 220 components and 0.15411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068712Jy sigma=0.000764 ! Fit after self-cal, rms=0.068708Jy sigma=0.000764 wmodel J2212+2759_S_2015_03_17_pus_map.mod ! Writing 220 model components to file: J2212+2759_S_2015_03_17_pus_map.mod wobs J2212+2759_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J2212+2759_S_2015_03_17_pus_uvs.fits wwins J2212+2759_S_2015_03_17_pus_map.win ! wwins: Wrote 7 windows to J2212+2759_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000212854 Jy ! Component: 100 - total flux cleaned = -0.000230565 Jy ! Component: 150 - total flux cleaned = -0.000196133 Jy ! Component: 200 - total flux cleaned = -0.000212478 Jy ! Component: 250 - total flux cleaned = -0.000163902 Jy ! Component: 300 - total flux cleaned = -0.000132508 Jy ! Component: 350 - total flux cleaned = -0.000117114 Jy ! Component: 400 - total flux cleaned = -0.000101872 Jy ! Component: 450 - total flux cleaned = -0.000131675 Jy ! Component: 500 - total flux cleaned = -0.000102582 Jy ! Component: 550 - total flux cleaned = -0.000160329 Jy ! Component: 600 - total flux cleaned = -0.000188924 Jy ! Component: 650 - total flux cleaned = -0.000189157 Jy ! Component: 700 - total flux cleaned = -0.000216914 Jy ! Component: 750 - total flux cleaned = -0.000203426 Jy ! Component: 800 - total flux cleaned = -0.000230218 Jy ! Component: 850 - total flux cleaned = -0.000243593 Jy ! Component: 900 - total flux cleaned = -0.000269538 Jy ! Component: 950 - total flux cleaned = -0.000295202 Jy ! Component: 1000 - total flux cleaned = -0.000346034 Jy ! Component: 1050 - total flux cleaned = -0.000370928 Jy ! Component: 1100 - total flux cleaned = -0.000346001 Jy ! Component: 1150 - total flux cleaned = -0.000382939 Jy ! Component: 1200 - total flux cleaned = -0.00039524 Jy ! Component: 1250 - total flux cleaned = -0.00041931 Jy ! Component: 1300 - total flux cleaned = -0.000455033 Jy ! Component: 1350 - total flux cleaned = -0.000443115 Jy ! Component: 1400 - total flux cleaned = -0.000443195 Jy ! Component: 1450 - total flux cleaned = -0.000431632 Jy ! Component: 1500 - total flux cleaned = -0.000454312 Jy ! Component: 1550 - total flux cleaned = -0.000454511 Jy ! Component: 1600 - total flux cleaned = -0.000499346 Jy ! Component: 1650 - total flux cleaned = -0.000510456 Jy ! Component: 1700 - total flux cleaned = -0.000521443 Jy ! Component: 1750 - total flux cleaned = -0.000543135 Jy ! Component: 1800 - total flux cleaned = -0.000521276 Jy ! Component: 1850 - total flux cleaned = -0.000521407 Jy ! Component: 1900 - total flux cleaned = -0.000500234 Jy ! Component: 1950 - total flux cleaned = -0.000510887 Jy ! Component: 2000 - total flux cleaned = -0.000521304 Jy ! Component: 2050 - total flux cleaned = -0.000531542 Jy ! Component: 2100 - total flux cleaned = -0.000531419 Jy ! Component: 2150 - total flux cleaned = -0.000521297 Jy ! Component: 2200 - total flux cleaned = -0.000490889 Jy ! Component: 2250 - total flux cleaned = -0.000541225 Jy ! Component: 2300 - total flux cleaned = -0.000511257 Jy ! Component: 2350 - total flux cleaned = -0.00048152 Jy ! Component: 2400 - total flux cleaned = -0.000491378 Jy ! Component: 2450 - total flux cleaned = -0.000491298 Jy ! Component: 2500 - total flux cleaned = -0.000529962 Jy ! Component: 2550 - total flux cleaned = -0.000472143 Jy ! Component: 2600 - total flux cleaned = -0.000510386 Jy ! Component: 2650 - total flux cleaned = -0.000538757 Jy ! Component: 2700 - total flux cleaned = -0.00051044 Jy ! Component: 2750 - total flux cleaned = -0.000501089 Jy ! Component: 2800 - total flux cleaned = -0.000547571 Jy ! Component: 2850 - total flux cleaned = -0.00051991 Jy ! Component: 2900 - total flux cleaned = -0.00055661 Jy ! Component: 2950 - total flux cleaned = -0.000547492 Jy ! Component: 3000 - total flux cleaned = -0.000529504 Jy ! Component: 3050 - total flux cleaned = -0.000556582 Jy ! Component: 3100 - total flux cleaned = -0.000574442 Jy ! Component: 3150 - total flux cleaned = -0.0005478 Jy ! Component: 3200 - total flux cleaned = -0.000512546 Jy ! Component: 3250 - total flux cleaned = -0.000565248 Jy ! Component: 3300 - total flux cleaned = -0.00056516 Jy ! Component: 3350 - total flux cleaned = -0.000556476 Jy ! Component: 3400 - total flux cleaned = -0.000530582 Jy ! Component: 3450 - total flux cleaned = -0.000556286 Jy ! Component: 3500 - total flux cleaned = -0.000530758 Jy ! Component: 3550 - total flux cleaned = -0.000530826 Jy ! Component: 3600 - total flux cleaned = -0.000564477 Jy ! Component: 3650 - total flux cleaned = -0.0005141 Jy ! Component: 3700 - total flux cleaned = -0.000539156 Jy ! Component: 3750 - total flux cleaned = -0.000547426 Jy ! Component: 3800 - total flux cleaned = -0.000506145 Jy ! Component: 3850 - total flux cleaned = -0.000547139 Jy ! Component: 3900 - total flux cleaned = -0.000506339 Jy ! Component: 3950 - total flux cleaned = -0.000530613 Jy ! Component: 4000 - total flux cleaned = -0.00052255 Jy ! Component: 4050 - total flux cleaned = -0.000530616 Jy ! Total flux subtracted in 4096 components = -0.00053069 Jy ! Clean residual min=-0.000571 max=0.000536 Jy/beam ! Clean residual mean=0.000001 rms=0.000145 Jy/beam ! Combined flux in latest and established models = 0.153579 Jy keep ! Adding 303 model components to the UV plane model. ! The established model now contains 523 components and 0.153579 Jy ![Exited script file: muppet] wmap "J2212+2759_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.909 x 5.928 at -6.091 degrees (North through East) ! Clean map min=-0.0011387 max=0.10572 Jy/beam ! Writing clean map to FITS file: J2212+2759_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.105721 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000143962 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.408518 0.408518 0.817036 1.63407 3.26814 6.53628 13.0726 26.1451 52.2903 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.105 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.909 x 5.928 at -6.091 degrees (North through East) ! Clean map min=-0.0011387 max=0.10572 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2212+2759_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 23:11:36 2016