! Started logfile: J2206-1835_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:35:51 2017 obs J2206-1835_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J2206-1835_S_2015_01_23_pus_uva.fits ! AN table 1: 112 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.982341 visibilities/baseline/integration-bin. ! Found source: J2206-1835 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 19804 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2206-1835_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.989294Jy sigma=0.008730 ! Fit after self-cal, rms=0.915837Jy sigma=0.007995 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.418 mas, bmaj=6.21 mas, bpa=-2.926 degrees ! Estimated noise=923.602 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.130907 Jy ! Component: 100 - total flux cleaned = 0.217996 Jy ! Total flux subtracted in 100 components = 0.217996 Jy ! Clean residual min=-0.044711 max=0.071605 Jy/beam ! Clean residual mean=-0.000585 rms=0.017963 Jy/beam ! Combined flux in latest and established models = 0.217996 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 47 components and 0.217996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.491055Jy sigma=0.004536 ! Fit after self-cal, rms=0.490420Jy sigma=0.004531 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.965 mas, bmaj=7.41 mas, bpa=-3.182 degrees ! Estimated noise=603.236 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.166478 Jy ! Component: 100 - total flux cleaned = 0.268489 Jy ! Component: 150 - total flux cleaned = 0.331389 Jy ! Component: 200 - total flux cleaned = 0.370169 Jy ! Total flux subtracted in 200 components = 0.370169 Jy ! Clean residual min=-0.087390 max=0.140067 Jy/beam ! Clean residual mean=-0.001594 rms=0.038137 Jy/beam ! Combined flux in latest and established models = 0.588165 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 53 components and 0.588165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.440901Jy sigma=0.003919 ! Fit after self-cal, rms=0.439949Jy sigma=0.003910 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 2.52 FD 1.71 HN 9.09 KP 1.09 ! LA 0.61 MK 2.15 NL 3.89 OV 1.73 ! PT 0.46 SC 2.59 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 2.61 FD 2.28 HN 12.36 KP 1.01 ! LA 0.60 MK 2.40 NL 4.67 OV 1.78 ! PT 0.46 SC 2.82 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 2.47 FD 2.51 HN 11.22 KP 0.91 ! LA 0.49 MK 2.66 NL 4.60 OV 1.79 ! PT 0.44 SC 2.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 3.01 FD 2.01 HN 9.48 KP 0.87 ! LA 0.52 MK 2.44 NL 4.08 OV 1.90 ! PT 0.47 SC 2.92 ! ! ! Fit before self-cal, rms=0.439949Jy sigma=0.003910 ! Fit after self-cal, rms=1.837248Jy sigma=0.002688 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.248 mas, bmaj=9.988 mas, bpa=-3.279 degrees ! Estimated noise=1086.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0319519 Jy ! Component: 100 - total flux cleaned = 0.0418595 Jy ! Component: 150 - total flux cleaned = 0.0425359 Jy ! Component: 200 - total flux cleaned = 0.0428567 Jy ! Total flux subtracted in 200 components = 0.0428567 Jy ! Clean residual min=-0.101734 max=0.166939 Jy/beam ! Clean residual mean=-0.000878 rms=0.041550 Jy/beam ! Combined flux in latest and established models = 0.631022 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 57 components and 0.631022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.833161Jy sigma=0.002710 ! Fit after self-cal, rms=1.863795Jy sigma=0.002637 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.863795Jy sigma=0.002637 ! Fit after self-cal, rms=2.237338Jy sigma=0.002371 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.806 mas, bmaj=9.969 mas, bpa=-7.037 degrees ! Estimated noise=1127.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.046477 Jy ! Component: 100 - total flux cleaned = 0.055681 Jy ! Component: 150 - total flux cleaned = 0.0573566 Jy ! Component: 200 - total flux cleaned = 0.0586954 Jy ! Total flux subtracted in 200 components = 0.0586954 Jy ! Clean residual min=-0.090622 max=0.145897 Jy/beam ! Clean residual mean=-0.000220 rms=0.037540 Jy/beam ! Combined flux in latest and established models = 0.689717 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 61 components and 0.689717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.232337Jy sigma=0.002367 ! Fit after self-cal, rms=2.236106Jy sigma=0.002358 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000898643 Jy ! Component: 100 - total flux cleaned = -0.000941858 Jy ! Component: 150 - total flux cleaned = -0.000965073 Jy ! Component: 200 - total flux cleaned = -0.000950349 Jy ! Total flux subtracted in 200 components = -0.000950349 Jy ! Clean residual min=-0.090533 max=0.145853 Jy/beam ! Clean residual mean=-0.000257 rms=0.037332 Jy/beam ! Combined flux in latest and established models = 0.688767 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 67 components and 0.688767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.233847Jy sigma=0.002362 ! Fit after self-cal, rms=2.236813Jy sigma=0.002357 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.236813Jy sigma=0.002357 ! Fit after self-cal, rms=2.564788Jy sigma=0.002345 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.795 mas, bmaj=10.4 mas, bpa=-8.353 degrees ! Estimated noise=1162.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0189511 Jy ! Component: 100 - total flux cleaned = 0.0204661 Jy ! Component: 150 - total flux cleaned = 0.0210967 Jy ! Component: 200 - total flux cleaned = 0.0215999 Jy ! Total flux subtracted in 200 components = 0.0215999 Jy ! Clean residual min=-0.093241 max=0.141083 Jy/beam ! Clean residual mean=-0.000250 rms=0.038011 Jy/beam ! Combined flux in latest and established models = 0.710367 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 67 components and 0.710367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.561461Jy sigma=0.002352 ! Fit after self-cal, rms=2.564171Jy sigma=0.002348 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00480906 Jy ! Component: 100 - total flux cleaned = -0.00489214 Jy ! Component: 150 - total flux cleaned = -0.0049882 Jy ! Component: 200 - total flux cleaned = -0.00500861 Jy ! Total flux subtracted in 200 components = -0.00500861 Jy ! Clean residual min=-0.093932 max=0.139650 Jy/beam ! Clean residual mean=-0.000306 rms=0.038036 Jy/beam ! Combined flux in latest and established models = 0.705359 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 71 components and 0.705359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.561900Jy sigma=0.002351 ! Fit after self-cal, rms=2.564007Jy sigma=0.002348 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.564007Jy sigma=0.002348 ! Fit after self-cal, rms=2.842820Jy sigma=0.002343 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.82 mas, bmaj=24.04 mas, bpa=-5.5 degrees ! Estimated noise=1102.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0230885 Jy ! Component: 100 - total flux cleaned = 0.0230355 Jy ! Component: 150 - total flux cleaned = 0.0230216 Jy ! Component: 200 - total flux cleaned = 0.0237755 Jy ! Total flux subtracted in 200 components = 0.0237755 Jy ! Clean residual min=-0.146857 max=0.212232 Jy/beam ! Clean residual mean=-0.000387 rms=0.058448 Jy/beam ! Combined flux in latest and established models = 0.729134 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 72 components and 0.729134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.838406Jy sigma=0.002365 ! Fit after self-cal, rms=2.842323Jy sigma=0.002354 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0080537 Jy ! Component: 100 - total flux cleaned = -0.00810918 Jy ! Component: 150 - total flux cleaned = -0.00732218 Jy ! Component: 200 - total flux cleaned = -0.00734251 Jy ! Total flux subtracted in 200 components = -0.00734251 Jy ! Clean residual min=-0.147751 max=0.207899 Jy/beam ! Clean residual mean=-0.000503 rms=0.058481 Jy/beam ! Combined flux in latest and established models = 0.721792 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 72 components and 0.721792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.839389Jy sigma=0.002371 ! Fit after self-cal, rms=2.841863Jy sigma=0.002365 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.003 mas, bmaj=10.85 mas, bpa=-8.257 degrees ! Estimated noise=1257.77 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.003 x 10.85 at -8.257 degrees (North through East) ! Clean map min=-0.1075 max=0.38725 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.918 mas, bmaj=7.923 mas, bpa=-6.817 degrees ! Estimated noise=2697.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.334539 Jy ! Component: 100 - total flux cleaned = 0.498021 Jy ! Component: 150 - total flux cleaned = 0.583998 Jy ! Component: 200 - total flux cleaned = 0.627776 Jy ! Total flux subtracted in 200 components = 0.627776 Jy ! Clean residual min=-0.094688 max=0.104468 Jy/beam ! Clean residual mean=-0.000672 rms=0.031060 Jy/beam ! Combined flux in latest and established models = 0.627776 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.627776 Jy ! Inverting map and beam ! Estimated beam: bmin=4.003 mas, bmaj=10.85 mas, bpa=-8.257 degrees ! Estimated noise=1257.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0504324 Jy ! Component: 100 - total flux cleaned = 0.0574927 Jy ! Component: 150 - total flux cleaned = 0.0599029 Jy ! Component: 200 - total flux cleaned = 0.0620185 Jy ! Total flux subtracted in 200 components = 0.0620185 Jy ! Clean residual min=-0.110029 max=0.146673 Jy/beam ! Clean residual mean=-0.000566 rms=0.041996 Jy/beam ! Combined flux in latest and established models = 0.689795 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 30 components and 0.689795 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.82 mas, bmaj=24.04 mas, bpa=-5.5 degrees ! Estimated noise=1102.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0213645 Jy ! Component: 100 - total flux cleaned = 0.0220109 Jy ! Component: 150 - total flux cleaned = 0.0224842 Jy ! Component: 200 - total flux cleaned = 0.0228591 Jy ! Total flux subtracted in 200 components = 0.0228591 Jy ! Clean residual min=-0.149985 max=0.209416 Jy/beam ! Clean residual mean=-0.000588 rms=0.059198 Jy/beam ! Combined flux in latest and established models = 0.712654 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000373244 Jy ! Component: 100 - total flux cleaned = 0.00104343 Jy ! Component: 150 - total flux cleaned = 0.00135328 Jy ! Component: 200 - total flux cleaned = 0.00166179 Jy ! Total flux subtracted in 200 components = 0.00166179 Jy ! Clean residual min=-0.149942 max=0.208704 Jy/beam ! Clean residual mean=-0.000573 rms=0.059090 Jy/beam ! Combined flux in latest and established models = 0.714316 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 33 components and 0.714316 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.003 mas, bmaj=10.85 mas, bpa=-8.257 degrees ! Estimated noise=1257.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00865844 Jy ! Component: 100 - total flux cleaned = -0.0101787 Jy ! Component: 150 - total flux cleaned = -0.0113131 Jy ! Component: 200 - total flux cleaned = -0.0117471 Jy ! Total flux subtracted in 200 components = -0.0117471 Jy ! Clean residual min=-0.108806 max=0.147163 Jy/beam ! Clean residual mean=-0.000502 rms=0.041821 Jy/beam ! Combined flux in latest and established models = 0.702569 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 38 components and 0.702569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.839398Jy sigma=0.002369 ! Fit after self-cal, rms=2.840982Jy sigma=0.002359 wmodel J2206-1835_S_2015_01_23_pus_map.mod ! Writing 38 model components to file: J2206-1835_S_2015_01_23_pus_map.mod wobs J2206-1835_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J2206-1835_S_2015_01_23_pus_uvs.fits wwins J2206-1835_S_2015_01_23_pus_map.win ! wwins: Wrote 1 windows to J2206-1835_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0616007 Jy ! Component: 100 - total flux cleaned = 0.0967504 Jy ! Component: 150 - total flux cleaned = 0.115602 Jy ! Component: 200 - total flux cleaned = 0.134948 Jy ! Component: 250 - total flux cleaned = 0.156674 Jy ! Component: 300 - total flux cleaned = 0.177316 Jy ! Component: 350 - total flux cleaned = 0.19544 Jy ! Component: 400 - total flux cleaned = 0.211279 Jy ! Component: 450 - total flux cleaned = 0.220972 Jy ! Component: 500 - total flux cleaned = 0.22763 Jy ! Component: 550 - total flux cleaned = 0.232781 Jy ! Component: 600 - total flux cleaned = 0.240291 Jy ! Component: 650 - total flux cleaned = 0.249984 Jy ! Component: 700 - total flux cleaned = 0.255851 Jy ! Component: 750 - total flux cleaned = 0.258146 Jy ! Component: 800 - total flux cleaned = 0.261529 Jy ! Component: 850 - total flux cleaned = 0.26701 Jy ! Component: 900 - total flux cleaned = 0.268081 Jy ! Component: 950 - total flux cleaned = 0.270207 Jy ! Component: 1000 - total flux cleaned = 0.275376 Jy ! Component: 1050 - total flux cleaned = 0.277401 Jy ! Component: 1100 - total flux cleaned = 0.279397 Jy ! Component: 1150 - total flux cleaned = 0.282335 Jy ! Component: 1200 - total flux cleaned = 0.286166 Jy ! Component: 1250 - total flux cleaned = 0.288039 Jy ! Component: 1300 - total flux cleaned = 0.292658 Jy ! Component: 1350 - total flux cleaned = 0.297224 Jy ! Component: 1400 - total flux cleaned = 0.306221 Jy ! Component: 1450 - total flux cleaned = 0.312414 Jy ! Component: 1500 - total flux cleaned = 0.317655 Jy ! Component: 1550 - total flux cleaned = 0.323714 Jy ! Component: 1600 - total flux cleaned = 0.331411 Jy ! Component: 1650 - total flux cleaned = 0.337319 Jy ! Component: 1700 - total flux cleaned = 0.344825 Jy ! Component: 1750 - total flux cleaned = 0.349771 Jy ! Component: 1800 - total flux cleaned = 0.354664 Jy ! Component: 1850 - total flux cleaned = 0.357894 Jy ! Component: 1900 - total flux cleaned = 0.362699 Jy ! Component: 1950 - total flux cleaned = 0.369819 Jy ! Component: 2000 - total flux cleaned = 0.371379 Jy ! Component: 2050 - total flux cleaned = 0.376038 Jy ! Component: 2100 - total flux cleaned = 0.379117 Jy ! Component: 2150 - total flux cleaned = 0.384461 Jy ! Component: 2200 - total flux cleaned = 0.387484 Jy ! Component: 2250 - total flux cleaned = 0.392724 Jy ! Component: 2300 - total flux cleaned = 0.393465 Jy ! Component: 2350 - total flux cleaned = 0.397154 Jy ! Component: 2400 - total flux cleaned = 0.400806 Jy ! Component: 2450 - total flux cleaned = 0.402247 Jy ! Component: 2500 - total flux cleaned = 0.402967 Jy ! Component: 2550 - total flux cleaned = 0.406545 Jy ! Component: 2600 - total flux cleaned = 0.407254 Jy ! Component: 2650 - total flux cleaned = 0.40796 Jy ! Component: 2700 - total flux cleaned = 0.410774 Jy ! Component: 2750 - total flux cleaned = 0.411473 Jy ! Component: 2800 - total flux cleaned = 0.412864 Jy ! Component: 2850 - total flux cleaned = 0.415629 Jy ! Component: 2900 - total flux cleaned = 0.415639 Jy ! Component: 2950 - total flux cleaned = 0.419066 Jy ! Component: 3000 - total flux cleaned = 0.42111 Jy ! Component: 3050 - total flux cleaned = 0.423824 Jy ! Component: 3100 - total flux cleaned = 0.425175 Jy ! Component: 3150 - total flux cleaned = 0.427199 Jy ! Component: 3200 - total flux cleaned = 0.430559 Jy ! Component: 3250 - total flux cleaned = 0.432569 Jy ! Component: 3300 - total flux cleaned = 0.433905 Jy ! Component: 3350 - total flux cleaned = 0.4379 Jy ! Component: 3400 - total flux cleaned = 0.441221 Jy ! Component: 3450 - total flux cleaned = 0.44255 Jy ! Component: 3500 - total flux cleaned = 0.445861 Jy ! Component: 3550 - total flux cleaned = 0.449828 Jy ! Component: 3600 - total flux cleaned = 0.453788 Jy ! Component: 3650 - total flux cleaned = 0.455765 Jy ! Component: 3700 - total flux cleaned = 0.456427 Jy ! Component: 3750 - total flux cleaned = 0.459718 Jy ! Component: 3800 - total flux cleaned = 0.462353 Jy ! Component: 3850 - total flux cleaned = 0.465646 Jy ! Component: 3900 - total flux cleaned = 0.468284 Jy ! Component: 3950 - total flux cleaned = 0.469605 Jy ! Component: 4000 - total flux cleaned = 0.474228 Jy ! Component: 4050 - total flux cleaned = 0.476211 Jy ! Total flux subtracted in 4096 components = 0.477532 Jy ! Clean residual min=-0.043768 max=0.036289 Jy/beam ! Clean residual mean=0.000025 rms=0.016080 Jy/beam ! Combined flux in latest and established models = 1.1801 Jy keep ! Adding 791 model components to the UV plane model. ! The established model now contains 829 components and 1.1801 Jy ![Exited script file: muppet] wmap "J2206-1835_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.003 x 10.85 at -8.257 degrees (North through East) ! Clean map min=-0.083391 max=0.45351 Jy/beam ! Writing clean map to FITS file: J2206-1835_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.453506 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0163037 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -10.7851 10.7851 21.5702 43.1403 86.2807 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0489 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.453 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.003 x 10.85 at -8.257 degrees (North through East) ! Clean map min=-0.083391 max=0.45351 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2206-1835_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:35:56 2017