! Started logfile: J2204+3632_S_2014_12_20_pus_uvs.log on Wed Dec 28 13:49:04 2016 obs J2204+3632_S_2014_12_20_pus_uva.fits ! Reading UV FITS file: J2204+3632_S_2014_12_20_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.968889 visibilities/baseline/integration-bin. ! Found source: J2204+3632 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 344 lines of history. ! ! Reading 20056 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2204+3632_S_2014_12_20_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.943471Jy sigma=0.011693 ! Fit after self-cal, rms=0.929622Jy sigma=0.011535 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=5.047 mas, bpa=-9.222 degrees ! Estimated noise=838.469 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0561085 Jy ! Component: 100 - total flux cleaned = 0.0686211 Jy ! Total flux subtracted in 100 components = 0.0686211 Jy ! Clean residual min=-0.003243 max=0.004152 Jy/beam ! Clean residual mean=0.000004 rms=0.000892 Jy/beam ! Combined flux in latest and established models = 0.0686211 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0686211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069986Jy sigma=0.000800 ! Fit after self-cal, rms=0.069979Jy sigma=0.000800 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.665 mas, bmaj=5.928 mas, bpa=-6.582 degrees ! Estimated noise=410.845 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00480228 Jy ! Component: 100 - total flux cleaned = 0.00728827 Jy ! Component: 150 - total flux cleaned = 0.00867985 Jy ! Component: 200 - total flux cleaned = 0.00956649 Jy ! Total flux subtracted in 200 components = 0.00956649 Jy ! Clean residual min=-0.002771 max=0.002970 Jy/beam ! Clean residual mean=0.000002 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.0781875 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 27 components and 0.0781875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069590Jy sigma=0.000796 ! Fit after self-cal, rms=0.069597Jy sigma=0.000796 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.85 HN 0.93 KP 1.08 ! LA 0.92 MK 1.02 NL 1.17 OV 0.98 ! PT 1.01 SC 1.05 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.09 HN 0.99 KP 1.02 ! LA 0.93 MK 1.01 NL 1.16 OV 0.99 ! PT 1.00 SC 1.05 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.16 HN 0.97 KP 0.91 ! LA 0.76 MK 1.06 NL 1.40 OV 0.93 ! PT 0.98 SC 1.08 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.04 HN 0.92 KP 0.91 ! LA 0.81 MK 0.98 NL 1.00 OV 0.92 ! PT 1.00 SC 0.99 ! ! ! Fit before self-cal, rms=0.069597Jy sigma=0.000796 ! Fit after self-cal, rms=0.068547Jy sigma=0.000786 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.689 mas, bmaj=5.99 mas, bpa=-6.783 degrees ! Estimated noise=411.628 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000141879 Jy ! Component: 100 - total flux cleaned = -0.000163285 Jy ! Component: 150 - total flux cleaned = -0.000202437 Jy ! Component: 200 - total flux cleaned = -0.000237667 Jy ! Total flux subtracted in 200 components = -0.000237667 Jy ! Clean residual min=-0.001544 max=0.001480 Jy/beam ! Clean residual mean=-0.000002 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.0779499 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.0779499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068543Jy sigma=0.000786 ! Fit after self-cal, rms=0.068559Jy sigma=0.000786 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068559Jy sigma=0.000786 ! Fit after self-cal, rms=0.068955Jy sigma=0.000784 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.69 mas, bmaj=5.984 mas, bpa=-6.619 degrees ! Estimated noise=411.446 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000291077 Jy ! Component: 100 - total flux cleaned = -0.000354671 Jy ! Component: 150 - total flux cleaned = -0.000375072 Jy ! Component: 200 - total flux cleaned = -0.000400907 Jy ! Total flux subtracted in 200 components = -0.000400907 Jy ! Clean residual min=-0.001136 max=0.001738 Jy/beam ! Clean residual mean=0.000001 rms=0.000296 Jy/beam ! Combined flux in latest and established models = 0.077549 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 0.077549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068950Jy sigma=0.000783 ! Fit after self-cal, rms=0.068970Jy sigma=0.000783 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (124.5, 100). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121719 Jy ! Component: 100 - total flux cleaned = 0.00122573 Jy ! Component: 150 - total flux cleaned = 0.00120946 Jy ! Component: 200 - total flux cleaned = 0.00119528 Jy ! Total flux subtracted in 200 components = 0.00119528 Jy ! Clean residual min=-0.001083 max=0.001225 Jy/beam ! Clean residual mean=-0.000000 rms=0.000283 Jy/beam ! Combined flux in latest and established models = 0.0787443 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 53 components and 0.0787443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068939Jy sigma=0.000783 ! Fit after self-cal, rms=0.068935Jy sigma=0.000783 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068935Jy sigma=0.000783 ! Fit after self-cal, rms=0.069091Jy sigma=0.000783 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.69 mas, bmaj=5.992 mas, bpa=-6.442 degrees ! Estimated noise=411.868 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000442193 Jy ! Component: 100 - total flux cleaned = 0.000348805 Jy ! Component: 150 - total flux cleaned = 0.000322111 Jy ! Component: 200 - total flux cleaned = 0.00030984 Jy ! Total flux subtracted in 200 components = 0.00030984 Jy ! Clean residual min=-0.001119 max=0.001179 Jy/beam ! Clean residual mean=-0.000000 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 0.0790541 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 57 components and 0.0790541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069083Jy sigma=0.000783 ! Fit after self-cal, rms=0.069084Jy sigma=0.000783 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.26593e-05 Jy ! Component: 100 - total flux cleaned = 6.27828e-05 Jy ! Component: 150 - total flux cleaned = 5.21328e-05 Jy ! Component: 200 - total flux cleaned = 5.21152e-05 Jy ! Total flux subtracted in 200 components = 5.21152e-05 Jy ! Clean residual min=-0.001113 max=0.001168 Jy/beam ! Clean residual mean=-0.000000 rms=0.000275 Jy/beam ! Combined flux in latest and established models = 0.0791062 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 62 components and 0.0791062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069081Jy sigma=0.000783 ! Fit after self-cal, rms=0.069080Jy sigma=0.000783 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069080Jy sigma=0.000783 ! Fit after self-cal, rms=0.069084Jy sigma=0.000783 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.583 mas, bmaj=9.557 mas, bpa=-5.847 degrees ! Estimated noise=496.899 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.54848e-05 Jy ! Component: 100 - total flux cleaned = 7.71737e-05 Jy ! Component: 150 - total flux cleaned = 7.74097e-05 Jy ! Component: 200 - total flux cleaned = 7.02581e-05 Jy ! Total flux subtracted in 200 components = 7.02581e-05 Jy ! Clean residual min=-0.001173 max=0.001187 Jy/beam ! Clean residual mean=-0.000000 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.0791765 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 68 components and 0.0791765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069083Jy sigma=0.000783 ! Fit after self-cal, rms=0.069083Jy sigma=0.000783 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.23253e-05 Jy ! Component: 100 - total flux cleaned = 2.03467e-05 Jy ! Component: 150 - total flux cleaned = 1.47161e-05 Jy ! Component: 200 - total flux cleaned = 9.4407e-06 Jy ! Total flux subtracted in 200 components = 9.4407e-06 Jy ! Clean residual min=-0.001166 max=0.001205 Jy/beam ! Clean residual mean=-0.000000 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.0791859 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 71 components and 0.0791859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069083Jy sigma=0.000783 ! Fit after self-cal, rms=0.069082Jy sigma=0.000783 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.69 mas, bmaj=5.996 mas, bpa=-6.374 degrees ! Estimated noise=411.811 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.69 x 5.996 at -6.374 degrees (North through East) ! Clean map min=-0.0010648 max=0.071739 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.083 mas, bmaj=5.076 mas, bpa=-9.363 degrees ! Estimated noise=840.114 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.056118 Jy ! Component: 100 - total flux cleaned = 0.0686727 Jy ! Component: 150 - total flux cleaned = 0.073253 Jy ! Component: 200 - total flux cleaned = 0.0757346 Jy ! Total flux subtracted in 200 components = 0.0757346 Jy ! Clean residual min=-0.002724 max=0.002504 Jy/beam ! Clean residual mean=-0.000000 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.0757346 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0757346 Jy ! Inverting map and beam ! Estimated beam: bmin=3.69 mas, bmaj=5.996 mas, bpa=-6.374 degrees ! Estimated noise=411.811 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182857 Jy ! Component: 100 - total flux cleaned = 0.00282021 Jy ! Component: 150 - total flux cleaned = 0.00306859 Jy ! Component: 200 - total flux cleaned = 0.00306809 Jy ! Total flux subtracted in 200 components = 0.00306809 Jy ! Clean residual min=-0.001137 max=0.001245 Jy/beam ! Clean residual mean=0.000000 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.0788027 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 38 components and 0.0788027 Jy ! Inverting map ! Added new window around map position (-111, 71). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000795889 Jy ! Component: 100 - total flux cleaned = 0.000993241 Jy ! Component: 150 - total flux cleaned = 0.00112355 Jy ! Component: 200 - total flux cleaned = 0.0011628 Jy ! Total flux subtracted in 200 components = 0.0011628 Jy ! Clean residual min=-0.001060 max=0.001187 Jy/beam ! Clean residual mean=-0.000000 rms=0.000271 Jy/beam ! Combined flux in latest and established models = 0.0799655 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 56 components and 0.0799655 Jy ! Inverting map ! Added new window around map position (2, -73). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000854094 Jy ! Component: 100 - total flux cleaned = 0.00104313 Jy ! Component: 150 - total flux cleaned = 0.00113828 Jy ! Component: 200 - total flux cleaned = 0.00124629 Jy ! Total flux subtracted in 200 components = 0.00124629 Jy ! Clean residual min=-0.001046 max=0.001022 Jy/beam ! Clean residual mean=0.000000 rms=0.000257 Jy/beam ! Combined flux in latest and established models = 0.0812118 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 72 components and 0.0812117 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.583 mas, bmaj=9.557 mas, bpa=-5.847 degrees ! Estimated noise=496.899 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.45319e-06 Jy ! Component: 100 - total flux cleaned = 1.94568e-05 Jy ! Component: 150 - total flux cleaned = 7.93954e-05 Jy ! Component: 200 - total flux cleaned = 0.000184775 Jy ! Total flux subtracted in 200 components = 0.000184775 Jy ! Clean residual min=-0.001193 max=0.001252 Jy/beam ! Clean residual mean=0.000000 rms=0.000289 Jy/beam ! Combined flux in latest and established models = 0.0813965 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16, 127). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105561 Jy ! Component: 100 - total flux cleaned = 0.00135352 Jy ! Component: 150 - total flux cleaned = 0.00147955 Jy ! Component: 200 - total flux cleaned = 0.0015757 Jy ! Total flux subtracted in 200 components = 0.0015757 Jy ! Clean residual min=-0.001127 max=0.000993 Jy/beam ! Clean residual mean=0.000001 rms=0.000273 Jy/beam ! Combined flux in latest and established models = 0.0829722 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 117 components and 0.0829722 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.69 mas, bmaj=5.996 mas, bpa=-6.374 degrees ! Estimated noise=411.811 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.39317e-05 Jy ! Component: 100 - total flux cleaned = -5.35175e-05 Jy ! Component: 150 - total flux cleaned = -0.000161921 Jy ! Component: 200 - total flux cleaned = -0.000179071 Jy ! Total flux subtracted in 200 components = -0.000179071 Jy ! Clean residual min=-0.000971 max=0.000940 Jy/beam ! Clean residual mean=0.000000 rms=0.000242 Jy/beam ! Combined flux in latest and established models = 0.0827931 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 145 components and 0.0827932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069034Jy sigma=0.000782 ! Fit after self-cal, rms=0.069027Jy sigma=0.000782 wmodel J2204+3632_S_2014_12_20_pus_map.mod ! Writing 145 model components to file: J2204+3632_S_2014_12_20_pus_map.mod wobs J2204+3632_S_2014_12_20_pus_uvs.fits ! Writing UV FITS file: J2204+3632_S_2014_12_20_pus_uvs.fits wwins J2204+3632_S_2014_12_20_pus_map.win ! wwins: Wrote 5 windows to J2204+3632_S_2014_12_20_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0001272 Jy ! Component: 100 - total flux cleaned = 0.00021011 Jy ! Component: 150 - total flux cleaned = 0.000258154 Jy ! Component: 200 - total flux cleaned = 0.000258248 Jy ! Component: 250 - total flux cleaned = 0.000228187 Jy ! Component: 300 - total flux cleaned = 0.000169462 Jy ! Component: 350 - total flux cleaned = 0.000155171 Jy ! Component: 400 - total flux cleaned = 0.000112937 Jy ! Component: 450 - total flux cleaned = 5.75219e-05 Jy ! Component: 500 - total flux cleaned = 2.91045e-06 Jy ! Component: 550 - total flux cleaned = -6.41303e-05 Jy ! Component: 600 - total flux cleaned = -0.000169001 Jy ! Component: 650 - total flux cleaned = -0.000194449 Jy ! Component: 700 - total flux cleaned = -0.000271084 Jy ! Component: 750 - total flux cleaned = -0.000359165 Jy ! Component: 800 - total flux cleaned = -0.000433655 Jy ! Component: 850 - total flux cleaned = -0.00048276 Jy ! Component: 900 - total flux cleaned = -0.000579941 Jy ! Component: 950 - total flux cleaned = -0.000591885 Jy ! Component: 1000 - total flux cleaned = -0.000639455 Jy ! Component: 1050 - total flux cleaned = -0.000698161 Jy ! Component: 1100 - total flux cleaned = -0.000744523 Jy ! Component: 1150 - total flux cleaned = -0.000778905 Jy ! Component: 1200 - total flux cleaned = -0.000847153 Jy ! Component: 1250 - total flux cleaned = -0.000858372 Jy ! Component: 1300 - total flux cleaned = -0.000902825 Jy ! Component: 1350 - total flux cleaned = -0.000913748 Jy ! Component: 1400 - total flux cleaned = -0.000913714 Jy ! Component: 1450 - total flux cleaned = -0.000924484 Jy ! Component: 1500 - total flux cleaned = -0.000913803 Jy ! Component: 1550 - total flux cleaned = -0.000903228 Jy ! Component: 1600 - total flux cleaned = -0.000903153 Jy ! Component: 1650 - total flux cleaned = -0.000892603 Jy ! Component: 1700 - total flux cleaned = -0.000841018 Jy ! Component: 1750 - total flux cleaned = -0.000871642 Jy ! Component: 1800 - total flux cleaned = -0.000861569 Jy ! Component: 1850 - total flux cleaned = -0.000831763 Jy ! Component: 1900 - total flux cleaned = -0.000851672 Jy ! Component: 1950 - total flux cleaned = -0.000861626 Jy ! Component: 2000 - total flux cleaned = -0.000861605 Jy ! Component: 2050 - total flux cleaned = -0.000871341 Jy ! Component: 2100 - total flux cleaned = -0.000871346 Jy ! Component: 2150 - total flux cleaned = -0.000852528 Jy ! Component: 2200 - total flux cleaned = -0.000880747 Jy ! Component: 2250 - total flux cleaned = -0.000880817 Jy ! Component: 2300 - total flux cleaned = -0.000890286 Jy ! Component: 2350 - total flux cleaned = -0.000890391 Jy ! Component: 2400 - total flux cleaned = -0.000917674 Jy ! Component: 2450 - total flux cleaned = -0.000917651 Jy ! Component: 2500 - total flux cleaned = -0.000926637 Jy ! Component: 2550 - total flux cleaned = -0.000908827 Jy ! Component: 2600 - total flux cleaned = -0.000926482 Jy ! Component: 2650 - total flux cleaned = -0.00087383 Jy ! Component: 2700 - total flux cleaned = -0.000908786 Jy ! Component: 2750 - total flux cleaned = -0.000891481 Jy ! Component: 2800 - total flux cleaned = -0.000934356 Jy ! Component: 2850 - total flux cleaned = -0.00090024 Jy ! Component: 2900 - total flux cleaned = -0.000917147 Jy ! Component: 2950 - total flux cleaned = -0.000959243 Jy ! Component: 3000 - total flux cleaned = -0.000925779 Jy ! Component: 3050 - total flux cleaned = -0.000942234 Jy ! Component: 3100 - total flux cleaned = -0.000917533 Jy ! Component: 3150 - total flux cleaned = -0.000909303 Jy ! Component: 3200 - total flux cleaned = -0.000860455 Jy ! Component: 3250 - total flux cleaned = -0.000900879 Jy ! Component: 3300 - total flux cleaned = -0.000860736 Jy ! Component: 3350 - total flux cleaned = -0.0009166 Jy ! Component: 3400 - total flux cleaned = -0.000845126 Jy ! Component: 3450 - total flux cleaned = -0.00081358 Jy ! Component: 3500 - total flux cleaned = -0.000844964 Jy ! Component: 3550 - total flux cleaned = -0.00082165 Jy ! Component: 3600 - total flux cleaned = -0.00080616 Jy ! Component: 3650 - total flux cleaned = -0.000798523 Jy ! Component: 3700 - total flux cleaned = -0.000798415 Jy ! Component: 3750 - total flux cleaned = -0.000783217 Jy ! Component: 3800 - total flux cleaned = -0.000753009 Jy ! Component: 3850 - total flux cleaned = -0.00076064 Jy ! Component: 3900 - total flux cleaned = -0.00074568 Jy ! Component: 3950 - total flux cleaned = -0.000745706 Jy ! Component: 4000 - total flux cleaned = -0.000730905 Jy ! Component: 4050 - total flux cleaned = -0.000723616 Jy ! Total flux subtracted in 4096 components = -0.000716208 Jy ! Clean residual min=-0.000379 max=0.000453 Jy/beam ! Clean residual mean=0.000001 rms=0.000132 Jy/beam ! Combined flux in latest and established models = 0.0820769 Jy keep ! Adding 264 model components to the UV plane model. ! The established model now contains 409 components and 0.0820769 Jy ![Exited script file: muppet] wmap "J2204+3632_S_2014_12_20_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.69 x 5.996 at -6.374 degrees (North through East) ! Clean map min=-0.00087756 max=0.071946 Jy/beam ! Writing clean map to FITS file: J2204+3632_S_2014_12_20_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0719456 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000131253 device "J2204+3632_S_2014_12_20_pus\_map.eps/VPS" ! Attempting to open device: 'J2204+3632_S_2014_12_20_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.547302 0.547302 1.0946 2.18921 4.37842 8.75683 17.5137 35.0273 70.0547 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.071 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.69 x 5.996 at -6.374 degrees (North through East) ! Clean map min=-0.00087756 max=0.071946 Jy/beam quit ! Quitting program ! Log file J2204+3632_S_2014_12_20_pus_uvs.log closed on Wed Dec 28 13:49:09 2016