! Started logfile: J2203+1007_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:35:45 2017 obs J2203+1007_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J2203+1007_S_2015_01_23_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.881932 visibilities/baseline/integration-bin. ! Found source: J2203+1007 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 18256 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2203+1007_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 126 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 126 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.971568Jy sigma=0.010459 ! Fit after self-cal, rms=0.917283Jy sigma=0.010031 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.808 mas, bmaj=6.48 mas, bpa=-4.626 degrees ! Estimated noise=825.419 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0748383 Jy ! Component: 100 - total flux cleaned = 0.104538 Jy ! Total flux subtracted in 100 components = 0.104538 Jy ! Clean residual min=-0.014431 max=0.052577 Jy/beam ! Clean residual mean=0.000006 rms=0.004497 Jy/beam ! Combined flux in latest and established models = 0.104538 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.104538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243176Jy sigma=0.001181 ! Fit after self-cal, rms=0.242798Jy sigma=0.001175 ! Inverting map ! Added new window around map position (-9, 3.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0448718 Jy ! Component: 100 - total flux cleaned = 0.0626454 Jy ! Total flux subtracted in 100 components = 0.0626454 Jy ! Clean residual min=-0.009113 max=0.014852 Jy/beam ! Clean residual mean=0.000004 rms=0.002589 Jy/beam ! Combined flux in latest and established models = 0.167183 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 30 components and 0.167183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233295Jy sigma=0.000945 ! Fit after self-cal, rms=0.231160Jy sigma=0.000887 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0210952 Jy ! Component: 100 - total flux cleaned = 0.031357 Jy ! Total flux subtracted in 100 components = 0.031357 Jy ! Clean residual min=-0.005078 max=0.006901 Jy/beam ! Clean residual mean=0.000007 rms=0.001375 Jy/beam ! Combined flux in latest and established models = 0.19854 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 40 components and 0.19854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228313Jy sigma=0.000823 ! Fit after self-cal, rms=0.228154Jy sigma=0.000817 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00856035 Jy ! Component: 100 - total flux cleaned = 0.0143221 Jy ! Total flux subtracted in 100 components = 0.0143221 Jy ! Clean residual min=-0.003958 max=0.005632 Jy/beam ! Clean residual mean=0.000008 rms=0.001058 Jy/beam ! Combined flux in latest and established models = 0.212862 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 50 components and 0.212862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227387Jy sigma=0.000805 ! Fit after self-cal, rms=0.227382Jy sigma=0.000804 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.277 mas, bmaj=7.032 mas, bpa=-3.401 degrees ! Estimated noise=504.792 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00749961 Jy ! Component: 100 - total flux cleaned = 0.0119194 Jy ! Component: 150 - total flux cleaned = 0.0150807 Jy ! Component: 200 - total flux cleaned = 0.0174855 Jy ! Total flux subtracted in 200 components = 0.0174855 Jy ! Clean residual min=-0.003372 max=0.003774 Jy/beam ! Clean residual mean=0.000006 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 0.230348 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 93 components and 0.230348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226735Jy sigma=0.000798 ! Fit after self-cal, rms=0.226749Jy sigma=0.000797 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.44 HN 0.99 KP 1.12 ! LA 1.08 MK 1.03 NL 1.10 OV 0.98 ! PT 1.04 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.04 KP 1.02 ! LA 1.03 MK 1.06 NL 1.17 OV 1.02 ! PT 1.01 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.00* HN 1.02 KP 0.87 ! LA 0.84 MK 1.02 NL 1.24 OV 0.95 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.54 HN 0.97 KP 0.80 ! LA 0.86 MK 1.00 NL 1.00 OV 0.98 ! PT 1.00 SC 0.97 ! ! ! Fit before self-cal, rms=0.226749Jy sigma=0.000797 ! Fit after self-cal, rms=0.123022Jy sigma=0.000772 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.298 mas, bmaj=7.046 mas, bpa=-2.953 degrees ! Estimated noise=505.009 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.96385e-05 Jy ! Component: 100 - total flux cleaned = 2.66936e-06 Jy ! Component: 150 - total flux cleaned = -1.66411e-06 Jy ! Component: 200 - total flux cleaned = 3.2845e-05 Jy ! Total flux subtracted in 200 components = 3.2845e-05 Jy ! Clean residual min=-0.001833 max=0.002135 Jy/beam ! Clean residual mean=0.000004 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.23038 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 107 components and 0.23038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122986Jy sigma=0.000771 ! Fit after self-cal, rms=0.122846Jy sigma=0.000771 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122846Jy sigma=0.000771 ! Fit after self-cal, rms=0.121680Jy sigma=0.000769 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.298 mas, bmaj=7.018 mas, bpa=-2.82 degrees ! Estimated noise=502.331 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.42121e-05 Jy ! Component: 100 - total flux cleaned = -5.86528e-05 Jy ! Component: 150 - total flux cleaned = -2.78764e-05 Jy ! Component: 200 - total flux cleaned = 2.37091e-05 Jy ! Total flux subtracted in 200 components = 2.37091e-05 Jy ! Clean residual min=-0.001463 max=0.001741 Jy/beam ! Clean residual mean=0.000000 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.230404 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 128 components and 0.230404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121658Jy sigma=0.000769 ! Fit after self-cal, rms=0.121672Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-115, -38). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115492 Jy ! Component: 100 - total flux cleaned = 0.00133469 Jy ! Component: 150 - total flux cleaned = 0.00133403 Jy ! Component: 200 - total flux cleaned = 0.00125131 Jy ! Total flux subtracted in 200 components = 0.00125131 Jy ! Clean residual min=-0.001436 max=0.001630 Jy/beam ! Clean residual mean=0.000001 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.231656 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 143 components and 0.231656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121640Jy sigma=0.000768 ! Fit after self-cal, rms=0.121644Jy sigma=0.000768 ! Inverting map ! Added new window around map position (-10.5, 64.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000885933 Jy ! Component: 100 - total flux cleaned = 0.00109352 Jy ! Component: 150 - total flux cleaned = 0.00126781 Jy ! Component: 200 - total flux cleaned = 0.00137374 Jy ! Total flux subtracted in 200 components = 0.00137374 Jy ! Clean residual min=-0.001467 max=0.001400 Jy/beam ! Clean residual mean=0.000000 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.233029 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 169 components and 0.233029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121616Jy sigma=0.000768 ! Fit after self-cal, rms=0.121617Jy sigma=0.000768 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121617Jy sigma=0.000768 ! Fit after self-cal, rms=0.121172Jy sigma=0.000768 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.296 mas, bmaj=7.005 mas, bpa=-2.717 degrees ! Estimated noise=502.145 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000334077 Jy ! Component: 100 - total flux cleaned = 0.0003873 Jy ! Component: 150 - total flux cleaned = 0.000485142 Jy ! Component: 200 - total flux cleaned = 0.000484674 Jy ! Total flux subtracted in 200 components = 0.000484674 Jy ! Clean residual min=-0.001431 max=0.001402 Jy/beam ! Clean residual mean=0.000000 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.233514 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 180 components and 0.233514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121154Jy sigma=0.000768 ! Fit after self-cal, rms=0.121159Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000146523 Jy ! Component: 100 - total flux cleaned = 0.000169568 Jy ! Component: 150 - total flux cleaned = 0.000234768 Jy ! Component: 200 - total flux cleaned = 0.000317396 Jy ! Total flux subtracted in 200 components = 0.000317396 Jy ! Clean residual min=-0.001451 max=0.001391 Jy/beam ! Clean residual mean=0.000000 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.233831 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 186 components and 0.233831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121147Jy sigma=0.000768 ! Fit after self-cal, rms=0.121151Jy sigma=0.000768 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121151Jy sigma=0.000768 ! Fit after self-cal, rms=0.120982Jy sigma=0.000768 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.04 mas, bmaj=10.75 mas, bpa=-5.473 degrees ! Estimated noise=639.382 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000155967 Jy ! Component: 100 - total flux cleaned = -0.000106942 Jy ! Component: 150 - total flux cleaned = -1.98557e-05 Jy ! Component: 200 - total flux cleaned = 1.84884e-05 Jy ! Total flux subtracted in 200 components = 1.84884e-05 Jy ! Clean residual min=-0.001599 max=0.001531 Jy/beam ! Clean residual mean=0.000001 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.23385 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 204 components and 0.23385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120972Jy sigma=0.000768 ! Fit after self-cal, rms=0.120975Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.80043e-05 Jy ! Component: 100 - total flux cleaned = -5.44919e-05 Jy ! Component: 150 - total flux cleaned = -2.36079e-05 Jy ! Component: 200 - total flux cleaned = 5.22654e-06 Jy ! Total flux subtracted in 200 components = 5.22654e-06 Jy ! Clean residual min=-0.001593 max=0.001533 Jy/beam ! Clean residual mean=0.000001 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.233855 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 215 components and 0.233855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120969Jy sigma=0.000768 ! Fit after self-cal, rms=0.120971Jy sigma=0.000768 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.296 mas, bmaj=6.998 mas, bpa=-2.64 degrees ! Estimated noise=502.176 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.296 x 6.998 at -2.64 degrees (North through East) ! Clean map min=-0.0013811 max=0.095478 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.824 mas, bmaj=6.445 mas, bpa=-3.839 degrees ! Estimated noise=818.492 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0862163 Jy ! Component: 100 - total flux cleaned = 0.132644 Jy ! Component: 150 - total flux cleaned = 0.160601 Jy ! Component: 200 - total flux cleaned = 0.177917 Jy ! Total flux subtracted in 200 components = 0.177917 Jy ! Clean residual min=-0.004698 max=0.009051 Jy/beam ! Clean residual mean=0.000000 rms=0.001486 Jy/beam ! Combined flux in latest and established models = 0.177917 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.177917 Jy ! Inverting map and beam ! Estimated beam: bmin=3.296 mas, bmaj=6.998 mas, bpa=-2.64 degrees ! Estimated noise=502.176 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150451 Jy ! Component: 100 - total flux cleaned = 0.0248399 Jy ! Component: 150 - total flux cleaned = 0.0316342 Jy ! Component: 200 - total flux cleaned = 0.0364872 Jy ! Total flux subtracted in 200 components = 0.0364872 Jy ! Clean residual min=-0.002237 max=0.002747 Jy/beam ! Clean residual mean=0.000003 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.214405 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 62 components and 0.214405 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00362517 Jy ! Component: 100 - total flux cleaned = 0.00648192 Jy ! Component: 150 - total flux cleaned = 0.00879352 Jy ! Component: 200 - total flux cleaned = 0.0106885 Jy ! Total flux subtracted in 200 components = 0.0106885 Jy ! Clean residual min=-0.001826 max=0.001777 Jy/beam ! Clean residual mean=0.000001 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.225093 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 110 components and 0.225093 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.04 mas, bmaj=10.75 mas, bpa=-5.473 degrees ! Estimated noise=639.382 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00228654 Jy ! Component: 100 - total flux cleaned = 0.00322 Jy ! Component: 150 - total flux cleaned = 0.00402417 Jy ! Component: 200 - total flux cleaned = 0.00465513 Jy ! Total flux subtracted in 200 components = 0.00465513 Jy ! Clean residual min=-0.001617 max=0.001473 Jy/beam ! Clean residual mean=0.000002 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.229748 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000571821 Jy ! Component: 100 - total flux cleaned = 0.00106834 Jy ! Component: 150 - total flux cleaned = 0.00153155 Jy ! Component: 200 - total flux cleaned = 0.00191699 Jy ! Total flux subtracted in 200 components = 0.00191699 Jy ! Clean residual min=-0.001629 max=0.001423 Jy/beam ! Clean residual mean=0.000001 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.231665 Jy ! Adding 97 model components to the UV plane model. ! The established model now contains 185 components and 0.231665 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.296 mas, bmaj=6.998 mas, bpa=-2.64 degrees ! Estimated noise=502.176 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00025551 Jy ! Component: 100 - total flux cleaned = 0.000468119 Jy ! Component: 150 - total flux cleaned = 0.000656016 Jy ! Component: 200 - total flux cleaned = 0.00082618 Jy ! Total flux subtracted in 200 components = 0.00082618 Jy ! Clean residual min=-0.001555 max=0.001396 Jy/beam ! Clean residual mean=0.000001 rms=0.000345 Jy/beam ! Combined flux in latest and established models = 0.232491 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 209 components and 0.232491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120978Jy sigma=0.000768 ! Fit after self-cal, rms=0.120974Jy sigma=0.000768 wmodel J2203+1007_S_2015_01_23_pus_map.mod ! Writing 209 model components to file: J2203+1007_S_2015_01_23_pus_map.mod wobs J2203+1007_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J2203+1007_S_2015_01_23_pus_uvs.fits wwins J2203+1007_S_2015_01_23_pus_map.win ! wwins: Wrote 5 windows to J2203+1007_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000342938 Jy ! Component: 100 - total flux cleaned = -0.000366074 Jy ! Component: 150 - total flux cleaned = -0.000454983 Jy ! Component: 200 - total flux cleaned = -0.000562691 Jy ! Component: 250 - total flux cleaned = -0.000709286 Jy ! Component: 300 - total flux cleaned = -0.000893356 Jy ! Component: 350 - total flux cleaned = -0.00103327 Jy ! Component: 400 - total flux cleaned = -0.00122865 Jy ! Component: 450 - total flux cleaned = -0.00134322 Jy ! Component: 500 - total flux cleaned = -0.00141833 Jy ! Component: 550 - total flux cleaned = -0.00151062 Jy ! Component: 600 - total flux cleaned = -0.00163707 Jy ! Component: 650 - total flux cleaned = -0.00170757 Jy ! Component: 700 - total flux cleaned = -0.00182997 Jy ! Component: 750 - total flux cleaned = -0.00191668 Jy ! Component: 800 - total flux cleaned = -0.00200209 Jy ! Component: 850 - total flux cleaned = -0.00211927 Jy ! Component: 900 - total flux cleaned = -0.00216885 Jy ! Component: 950 - total flux cleaned = -0.00225079 Jy ! Component: 1000 - total flux cleaned = -0.00229901 Jy ! Component: 1050 - total flux cleaned = -0.00245822 Jy ! Component: 1100 - total flux cleaned = -0.00253628 Jy ! Component: 1150 - total flux cleaned = -0.0025517 Jy ! Component: 1200 - total flux cleaned = -0.00267398 Jy ! Component: 1250 - total flux cleaned = -0.00273448 Jy ! Component: 1300 - total flux cleaned = -0.0028389 Jy ! Component: 1350 - total flux cleaned = -0.00295683 Jy ! Component: 1400 - total flux cleaned = -0.00301505 Jy ! Component: 1450 - total flux cleaned = -0.00305813 Jy ! Component: 1500 - total flux cleaned = -0.00308668 Jy ! Component: 1550 - total flux cleaned = -0.00317153 Jy ! Component: 1600 - total flux cleaned = -0.00326922 Jy ! Component: 1650 - total flux cleaned = -0.00329661 Jy ! Component: 1700 - total flux cleaned = -0.00335165 Jy ! Component: 1750 - total flux cleaned = -0.00340593 Jy ! Component: 1800 - total flux cleaned = -0.00349982 Jy ! Component: 1850 - total flux cleaned = -0.00353961 Jy ! Component: 1900 - total flux cleaned = -0.00363169 Jy ! Component: 1950 - total flux cleaned = -0.0036709 Jy ! Component: 2000 - total flux cleaned = -0.00373526 Jy ! Component: 2050 - total flux cleaned = -0.00372238 Jy ! Component: 2100 - total flux cleaned = -0.00377318 Jy ! Component: 2150 - total flux cleaned = -0.00378567 Jy ! Component: 2200 - total flux cleaned = -0.00382321 Jy ! Component: 2250 - total flux cleaned = -0.00383589 Jy ! Component: 2300 - total flux cleaned = -0.00387263 Jy ! Component: 2350 - total flux cleaned = -0.00387264 Jy ! Component: 2400 - total flux cleaned = -0.00393289 Jy ! Component: 2450 - total flux cleaned = -0.00398068 Jy ! Component: 2500 - total flux cleaned = -0.00399246 Jy ! Component: 2550 - total flux cleaned = -0.00406295 Jy ! Component: 2600 - total flux cleaned = -0.00409799 Jy ! Component: 2650 - total flux cleaned = -0.00414414 Jy ! Component: 2700 - total flux cleaned = -0.00413255 Jy ! Component: 2750 - total flux cleaned = -0.00417823 Jy ! Component: 2800 - total flux cleaned = -0.00423483 Jy ! Component: 2850 - total flux cleaned = -0.00421236 Jy ! Component: 2900 - total flux cleaned = -0.0042124 Jy ! Component: 2950 - total flux cleaned = -0.00424571 Jy ! Component: 3000 - total flux cleaned = -0.00425663 Jy ! Component: 3050 - total flux cleaned = -0.00428942 Jy ! Component: 3100 - total flux cleaned = -0.00424592 Jy ! Component: 3150 - total flux cleaned = -0.00429998 Jy ! Component: 3200 - total flux cleaned = -0.00430008 Jy ! Component: 3250 - total flux cleaned = -0.00434276 Jy ! Component: 3300 - total flux cleaned = -0.00434269 Jy ! Component: 3350 - total flux cleaned = -0.00436379 Jy ! Component: 3400 - total flux cleaned = -0.00441605 Jy ! Component: 3450 - total flux cleaned = -0.0043849 Jy ! Component: 3500 - total flux cleaned = -0.0043953 Jy ! Component: 3550 - total flux cleaned = -0.00444668 Jy ! Component: 3600 - total flux cleaned = -0.0044467 Jy ! Component: 3650 - total flux cleaned = -0.00449738 Jy ! Component: 3700 - total flux cleaned = -0.00448728 Jy ! Component: 3750 - total flux cleaned = -0.0044873 Jy ! Component: 3800 - total flux cleaned = -0.00450732 Jy ! Component: 3850 - total flux cleaned = -0.00451724 Jy ! Component: 3900 - total flux cleaned = -0.0045271 Jy ! Component: 3950 - total flux cleaned = -0.00454678 Jy ! Component: 4000 - total flux cleaned = -0.00457603 Jy ! Component: 4050 - total flux cleaned = -0.00458569 Jy ! Total flux subtracted in 4096 components = -0.0045953 Jy ! Clean residual min=-0.000512 max=0.000582 Jy/beam ! Clean residual mean=0.000000 rms=0.000176 Jy/beam ! Combined flux in latest and established models = 0.227896 Jy keep ! Adding 295 model components to the UV plane model. ! The established model now contains 504 components and 0.227896 Jy ![Exited script file: muppet] wmap "J2203+1007_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.296 x 6.998 at -2.64 degrees (North through East) ! Clean map min=-0.0012826 max=0.096349 Jy/beam ! Writing clean map to FITS file: J2203+1007_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0963491 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000173611 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.54057 0.54057 1.08114 2.16228 4.32456 8.64912 17.2982 34.5965 69.1929 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.096 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.296 x 6.998 at -2.64 degrees (North through East) ! Clean map min=-0.0012826 max=0.096349 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2203+1007_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:35:51 2017