! Started logfile: J2200-1632_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:36:52 2017 obs J2200-1632_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J2200-1632_S_2014_01_04_pus_uva.fits ! AN table 1: 108 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.513889 visibilities/baseline/integration-bin. ! Found source: J2200-1632 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 7992 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2200-1632_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 261 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 261 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 261 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 261 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.999526Jy sigma=0.011998 ! Fit after self-cal, rms=0.950703Jy sigma=0.011379 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.568 mas, bmaj=5.644 mas, bpa=7.204 degrees ! Estimated noise=1469.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0448194 Jy ! Component: 100 - total flux cleaned = 0.0528754 Jy ! Total flux subtracted in 100 components = 0.0528754 Jy ! Clean residual min=-0.009774 max=0.007691 Jy/beam ! Clean residual mean=0.000003 rms=0.001835 Jy/beam ! Combined flux in latest and established models = 0.0528754 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0528754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086938Jy sigma=0.000879 ! Fit after self-cal, rms=0.085661Jy sigma=0.000866 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.397 mas, bmaj=7.93 mas, bpa=12.88 degrees ! Estimated noise=695.633 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000798862 Jy ! Component: 100 - total flux cleaned = 0.000705425 Jy ! Component: 150 - total flux cleaned = 0.000566095 Jy ! Component: 200 - total flux cleaned = 0.000508577 Jy ! Total flux subtracted in 200 components = 0.000508577 Jy ! Clean residual min=-0.008355 max=0.006031 Jy/beam ! Clean residual mean=0.000003 rms=0.001512 Jy/beam ! Combined flux in latest and established models = 0.053384 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 10 components and 0.053384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085561Jy sigma=0.000864 ! Fit after self-cal, rms=0.085565Jy sigma=0.000864 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.76 FD 1.00* KP 1.00* LA 1.06 ! MK 0.96 NL 1.01 OV 1.32 PT 1.09 ! SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 1.00* KP 1.00* LA 1.01 ! MK 1.01 NL 1.03 OV 1.42 PT 1.16 ! SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.67 FD 1.00* KP 1.00* LA 0.92 ! MK 1.03 NL 1.02 OV 1.18 PT 1.08 ! SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.79 FD 1.00* KP 1.00* LA 1.01 ! MK 1.04 NL 1.13 OV 1.38 PT 1.14 ! SC 0.95 ! ! ! Fit before self-cal, rms=0.085565Jy sigma=0.000864 ! Fit after self-cal, rms=0.090922Jy sigma=0.000849 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.356 mas, bmaj=7.756 mas, bpa=14.34 degrees ! Estimated noise=691.158 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150624 Jy ! Component: 100 - total flux cleaned = 0.0018854 Jy ! Component: 150 - total flux cleaned = 0.00199072 Jy ! Component: 200 - total flux cleaned = 0.00208067 Jy ! Total flux subtracted in 200 components = 0.00208067 Jy ! Clean residual min=-0.003238 max=0.002906 Jy/beam ! Clean residual mean=0.000001 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.0554647 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 23 components and 0.0554647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090887Jy sigma=0.000848 ! Fit after self-cal, rms=0.093500Jy sigma=0.000842 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093500Jy sigma=0.000842 ! Fit after self-cal, rms=0.109605Jy sigma=0.000835 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.362 mas, bmaj=7.772 mas, bpa=15.52 degrees ! Estimated noise=718.512 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103473 Jy ! Component: 100 - total flux cleaned = 0.00125225 Jy ! Component: 150 - total flux cleaned = 0.00132053 Jy ! Component: 200 - total flux cleaned = 0.00139625 Jy ! Total flux subtracted in 200 components = 0.00139625 Jy ! Clean residual min=-0.002050 max=0.002373 Jy/beam ! Clean residual mean=0.000011 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.0568609 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 32 components and 0.0568609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109574Jy sigma=0.000835 ! Fit after self-cal, rms=0.111479Jy sigma=0.000833 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00106731 Jy ! Component: 100 - total flux cleaned = -0.000965015 Jy ! Component: 150 - total flux cleaned = -0.000880472 Jy ! Component: 200 - total flux cleaned = -0.000803105 Jy ! Total flux subtracted in 200 components = -0.000803105 Jy ! Clean residual min=-0.003274 max=0.002484 Jy/beam ! Clean residual mean=0.000005 rms=0.000690 Jy/beam ! Combined flux in latest and established models = 0.0560578 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 45 components and 0.0560578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111415Jy sigma=0.000833 ! Fit after self-cal, rms=0.111486Jy sigma=0.000833 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111486Jy sigma=0.000833 ! Fit after self-cal, rms=0.123521Jy sigma=0.000832 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.367 mas, bmaj=7.799 mas, bpa=16.17 degrees ! Estimated noise=723.213 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000691892 Jy ! Component: 100 - total flux cleaned = 0.000863884 Jy ! Component: 150 - total flux cleaned = 0.000995968 Jy ! Component: 200 - total flux cleaned = 0.0010848 Jy ! Total flux subtracted in 200 components = 0.0010848 Jy ! Clean residual min=-0.002236 max=0.002548 Jy/beam ! Clean residual mean=0.000009 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.0571426 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 51 components and 0.0571426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123498Jy sigma=0.000832 ! Fit after self-cal, rms=0.124650Jy sigma=0.000832 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000680853 Jy ! Component: 100 - total flux cleaned = -0.000571946 Jy ! Component: 150 - total flux cleaned = -0.000481676 Jy ! Component: 200 - total flux cleaned = -0.000440254 Jy ! Total flux subtracted in 200 components = -0.000440254 Jy ! Clean residual min=-0.002732 max=0.002391 Jy/beam ! Clean residual mean=0.000005 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.0567024 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 56 components and 0.0567024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124611Jy sigma=0.000832 ! Fit after self-cal, rms=0.124671Jy sigma=0.000832 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124671Jy sigma=0.000832 ! Fit after self-cal, rms=0.134624Jy sigma=0.000831 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.349 mas, bmaj=15.43 mas, bpa=17.32 degrees ! Estimated noise=860.575 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112394 Jy ! Component: 100 - total flux cleaned = 0.0014121 Jy ! Component: 150 - total flux cleaned = 0.00150816 Jy ! Component: 200 - total flux cleaned = 0.0015929 Jy ! Total flux subtracted in 200 components = 0.0015929 Jy ! Clean residual min=-0.002762 max=0.003298 Jy/beam ! Clean residual mean=0.000015 rms=0.000880 Jy/beam ! Combined flux in latest and established models = 0.0582953 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 61 components and 0.0582953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134612Jy sigma=0.000831 ! Fit after self-cal, rms=0.135341Jy sigma=0.000831 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000282531 Jy ! Component: 100 - total flux cleaned = -0.000235417 Jy ! Component: 150 - total flux cleaned = -0.000206792 Jy ! Component: 200 - total flux cleaned = -0.000181409 Jy ! Total flux subtracted in 200 components = -0.000181409 Jy ! Clean residual min=-0.002684 max=0.003147 Jy/beam ! Clean residual mean=0.000012 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.0581139 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 63 components and 0.0581139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135321Jy sigma=0.000831 ! Fit after self-cal, rms=0.135333Jy sigma=0.000831 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.366 mas, bmaj=7.82 mas, bpa=16.58 degrees ! Estimated noise=726.039 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.366 x 7.82 at 16.58 degrees (North through East) ! Clean map min=-0.0024654 max=0.050614 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.579 mas, bmaj=5.388 mas, bpa=9.794 degrees ! Estimated noise=1478.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0418326 Jy ! Component: 100 - total flux cleaned = 0.0518366 Jy ! Component: 150 - total flux cleaned = 0.0532765 Jy ! Component: 200 - total flux cleaned = 0.0543684 Jy ! Total flux subtracted in 200 components = 0.0543684 Jy ! Clean residual min=-0.004842 max=0.004870 Jy/beam ! Clean residual mean=0.000002 rms=0.001209 Jy/beam ! Combined flux in latest and established models = 0.0543684 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0543684 Jy ! Inverting map and beam ! Estimated beam: bmin=3.366 mas, bmaj=7.82 mas, bpa=16.58 degrees ! Estimated noise=726.039 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160148 Jy ! Component: 100 - total flux cleaned = 0.00190282 Jy ! Component: 150 - total flux cleaned = 0.00212356 Jy ! Component: 200 - total flux cleaned = 0.00237 Jy ! Total flux subtracted in 200 components = 0.00237 Jy ! Clean residual min=-0.002654 max=0.002716 Jy/beam ! Clean residual mean=0.000006 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.0567384 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 17 components and 0.0567384 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.349 mas, bmaj=15.43 mas, bpa=17.32 degrees ! Estimated noise=860.575 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000734164 Jy ! Component: 100 - total flux cleaned = 0.000789644 Jy ! Component: 150 - total flux cleaned = 0.000837986 Jy ! Component: 200 - total flux cleaned = 0.000879114 Jy ! Total flux subtracted in 200 components = 0.000879114 Jy ! Clean residual min=-0.002667 max=0.003208 Jy/beam ! Clean residual mean=0.000012 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.0576175 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.66898e-05 Jy ! Component: 100 - total flux cleaned = 7.95016e-05 Jy ! Component: 150 - total flux cleaned = 0.000108289 Jy ! Component: 200 - total flux cleaned = 0.000134963 Jy ! Total flux subtracted in 200 components = 0.000134963 Jy ! Clean residual min=-0.002683 max=0.003216 Jy/beam ! Clean residual mean=0.000012 rms=0.000875 Jy/beam ! Combined flux in latest and established models = 0.0577524 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 21 components and 0.0577524 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.366 mas, bmaj=7.82 mas, bpa=16.58 degrees ! Estimated noise=726.039 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00022156 Jy ! Component: 100 - total flux cleaned = -0.000101033 Jy ! Component: 150 - total flux cleaned = -5.37697e-05 Jy ! Component: 200 - total flux cleaned = -3.30872e-05 Jy ! Total flux subtracted in 200 components = -3.30872e-05 Jy ! Clean residual min=-0.002681 max=0.002503 Jy/beam ! Clean residual mean=0.000006 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.0577194 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 29 components and 0.0577194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135298Jy sigma=0.000831 ! Fit after self-cal, rms=0.135340Jy sigma=0.000831 wmodel J2200-1632_S_2014_01_04_pus_map.mod ! Writing 29 model components to file: J2200-1632_S_2014_01_04_pus_map.mod wobs J2200-1632_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J2200-1632_S_2014_01_04_pus_uvs.fits wwins J2200-1632_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J2200-1632_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000208669 Jy ! Component: 100 - total flux cleaned = -0.000209224 Jy ! Component: 150 - total flux cleaned = -0.000247493 Jy ! Component: 200 - total flux cleaned = -0.000211131 Jy ! Component: 250 - total flux cleaned = -0.000140982 Jy ! Component: 300 - total flux cleaned = -7.35732e-05 Jy ! Component: 350 - total flux cleaned = -7.3665e-05 Jy ! Component: 400 - total flux cleaned = -8.81293e-06 Jy ! Component: 450 - total flux cleaned = -3.88972e-05 Jy ! Component: 500 - total flux cleaned = 2.26373e-05 Jy ! Component: 550 - total flux cleaned = -9.57111e-05 Jy ! Component: 600 - total flux cleaned = -0.00012447 Jy ! Component: 650 - total flux cleaned = -0.000153184 Jy ! Component: 700 - total flux cleaned = -0.00018172 Jy ! Component: 750 - total flux cleaned = -0.000263219 Jy ! Component: 800 - total flux cleaned = -0.00034258 Jy ! Component: 850 - total flux cleaned = -0.000316913 Jy ! Component: 900 - total flux cleaned = -0.000419209 Jy ! Component: 950 - total flux cleaned = -0.000444235 Jy ! Component: 1000 - total flux cleaned = -0.000518154 Jy ! Component: 1050 - total flux cleaned = -0.000687574 Jy ! Component: 1100 - total flux cleaned = -0.000734628 Jy ! Component: 1150 - total flux cleaned = -0.000734698 Jy ! Component: 1200 - total flux cleaned = -0.000780601 Jy ! Component: 1250 - total flux cleaned = -0.000848941 Jy ! Component: 1300 - total flux cleaned = -0.00082603 Jy ! Component: 1350 - total flux cleaned = -0.00082572 Jy ! Component: 1400 - total flux cleaned = -0.000869144 Jy ! Component: 1450 - total flux cleaned = -0.000869511 Jy ! Component: 1500 - total flux cleaned = -0.000996428 Jy ! Component: 1550 - total flux cleaned = -0.000996554 Jy ! Component: 1600 - total flux cleaned = -0.00112026 Jy ! Component: 1650 - total flux cleaned = -0.00124217 Jy ! Component: 1700 - total flux cleaned = -0.00126223 Jy ! Component: 1750 - total flux cleaned = -0.00136206 Jy ! Component: 1800 - total flux cleaned = -0.00146029 Jy ! Component: 1850 - total flux cleaned = -0.00153813 Jy ! Component: 1900 - total flux cleaned = -0.00161524 Jy ! Component: 1950 - total flux cleaned = -0.00172928 Jy ! Component: 2000 - total flux cleaned = -0.00174796 Jy ! Component: 2050 - total flux cleaned = -0.00184078 Jy ! Component: 2100 - total flux cleaned = -0.0018593 Jy ! Component: 2150 - total flux cleaned = -0.00191393 Jy ! Component: 2200 - total flux cleaned = -0.00187807 Jy ! Component: 2250 - total flux cleaned = -0.00202148 Jy ! Component: 2300 - total flux cleaned = -0.00209235 Jy ! Component: 2350 - total flux cleaned = -0.00216217 Jy ! Component: 2400 - total flux cleaned = -0.00217936 Jy ! Component: 2450 - total flux cleaned = -0.0022139 Jy ! Component: 2500 - total flux cleaned = -0.00229907 Jy ! Component: 2550 - total flux cleaned = -0.00236648 Jy ! Component: 2600 - total flux cleaned = -0.0024501 Jy ! Component: 2650 - total flux cleaned = -0.00249965 Jy ! Component: 2700 - total flux cleaned = -0.00256528 Jy ! Component: 2750 - total flux cleaned = -0.00261412 Jy ! Component: 2800 - total flux cleaned = -0.00271103 Jy ! Component: 2850 - total flux cleaned = -0.00282281 Jy ! Component: 2900 - total flux cleaned = -0.00288616 Jy ! Component: 2950 - total flux cleaned = -0.00301167 Jy ! Component: 3000 - total flux cleaned = -0.00310491 Jy ! Component: 3050 - total flux cleaned = -0.00318228 Jy ! Component: 3100 - total flux cleaned = -0.0032896 Jy ! Component: 3150 - total flux cleaned = -0.00338072 Jy ! Component: 3200 - total flux cleaned = -0.00342592 Jy ! Component: 3250 - total flux cleaned = -0.00351571 Jy ! Component: 3300 - total flux cleaned = -0.00364937 Jy ! Component: 3350 - total flux cleaned = -0.00367869 Jy ! Component: 3400 - total flux cleaned = -0.00376658 Jy ! Component: 3450 - total flux cleaned = -0.00385375 Jy ! Component: 3500 - total flux cleaned = -0.00396903 Jy ! Component: 3550 - total flux cleaned = -0.0040404 Jy ! Component: 3600 - total flux cleaned = -0.00408306 Jy ! Component: 3650 - total flux cleaned = -0.00418191 Jy ! Component: 3700 - total flux cleaned = -0.0042659 Jy ! Component: 3750 - total flux cleaned = -0.00434951 Jy ! Component: 3800 - total flux cleaned = -0.00441871 Jy ! Component: 3850 - total flux cleaned = -0.00452855 Jy ! Component: 3900 - total flux cleaned = -0.0045831 Jy ! Component: 3950 - total flux cleaned = -0.00469165 Jy ! Component: 4000 - total flux cleaned = -0.00477242 Jy ! Component: 4050 - total flux cleaned = -0.00487934 Jy ! Total flux subtracted in 4096 components = -0.00494583 Jy ! Clean residual min=-0.000755 max=0.000774 Jy/beam ! Clean residual mean=-0.000001 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.0527735 Jy keep ! Adding 232 model components to the UV plane model. ! The established model now contains 261 components and 0.0527735 Jy ![Exited script file: muppet] wmap "J2200-1632_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.366 x 7.82 at 16.58 degrees (North through East) ! Clean map min=-0.0018258 max=0.050533 Jy/beam ! Writing clean map to FITS file: J2200-1632_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0505334 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000228693 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.35767 1.35767 2.71534 5.43069 10.8614 21.7227 43.4455 86.891 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.05 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.366 x 7.82 at 16.58 degrees (North through East) ! Clean map min=-0.0018258 max=0.050533 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2200-1632_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:36:57 2017