! Started logfile: J2155+1914_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:36:38 2017 obs J2155+1914_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J2155+1914_S_2014_01_04_pus_uva.fits ! AN table 1: 118 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J2155+1914 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 8496 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2155+1914_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.931831Jy sigma=0.013264 ! Fit after self-cal, rms=0.918634Jy sigma=0.013072 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.725 mas, bmaj=5.247 mas, bpa=0.8009 degrees ! Estimated noise=814.643 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0634912 Jy ! Component: 100 - total flux cleaned = 0.0787917 Jy ! Total flux subtracted in 100 components = 0.0787917 Jy ! Clean residual min=-0.004202 max=0.005919 Jy/beam ! Clean residual mean=-0.000002 rms=0.001119 Jy/beam ! Combined flux in latest and established models = 0.0787918 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0787918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075088Jy sigma=0.000914 ! Fit after self-cal, rms=0.074956Jy sigma=0.000913 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.323 mas, bmaj=6.089 mas, bpa=2.592 degrees ! Estimated noise=572.139 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0079432 Jy ! Component: 100 - total flux cleaned = 0.0113468 Jy ! Component: 150 - total flux cleaned = 0.0132938 Jy ! Component: 200 - total flux cleaned = 0.0145049 Jy ! Total flux subtracted in 200 components = 0.0145049 Jy ! Clean residual min=-0.002407 max=0.003518 Jy/beam ! Clean residual mean=0.000001 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.0932967 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 35 components and 0.0932967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074106Jy sigma=0.000903 ! Fit after self-cal, rms=0.074128Jy sigma=0.000903 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* KP 1.00* LA 1.08 ! MK 1.00 NL 0.93 OV 0.95 PT 1.00 ! SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* KP 1.00* LA 1.03 ! MK 1.03 NL 1.03 OV 0.98 PT 0.95 ! SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* KP 1.00* LA 0.85 ! MK 1.03 NL 0.97 OV 0.94 PT 1.02 ! SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* KP 1.00* LA 0.85 ! MK 1.01 NL 1.15 OV 1.03 PT 1.00 ! SC 0.93 ! ! ! Fit before self-cal, rms=0.074128Jy sigma=0.000903 ! Fit after self-cal, rms=0.071960Jy sigma=0.000894 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.314 mas, bmaj=6.12 mas, bpa=3.152 degrees ! Estimated noise=569.467 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000595538 Jy ! Component: 100 - total flux cleaned = 0.000513899 Jy ! Component: 150 - total flux cleaned = 0.0005136 Jy ! Component: 200 - total flux cleaned = 0.000513255 Jy ! Total flux subtracted in 200 components = 0.000513255 Jy ! Clean residual min=-0.002216 max=0.002558 Jy/beam ! Clean residual mean=0.000000 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.0938099 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 47 components and 0.0938099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071931Jy sigma=0.000894 ! Fit after self-cal, rms=0.071714Jy sigma=0.000894 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071714Jy sigma=0.000894 ! Fit after self-cal, rms=0.071939Jy sigma=0.000892 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.302 mas, bmaj=6.13 mas, bpa=3.02 degrees ! Estimated noise=569.849 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000426347 Jy ! Component: 100 - total flux cleaned = 0.000518193 Jy ! Component: 150 - total flux cleaned = 0.00055889 Jy ! Component: 200 - total flux cleaned = 0.000576457 Jy ! Total flux subtracted in 200 components = 0.000576457 Jy ! Clean residual min=-0.001741 max=0.002122 Jy/beam ! Clean residual mean=-0.000000 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.0943864 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 49 components and 0.0943864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071921Jy sigma=0.000892 ! Fit after self-cal, rms=0.072017Jy sigma=0.000892 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (73, 127.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157106 Jy ! Component: 100 - total flux cleaned = 0.00166986 Jy ! Component: 150 - total flux cleaned = 0.00174897 Jy ! Component: 200 - total flux cleaned = 0.00182025 Jy ! Total flux subtracted in 200 components = 0.00182025 Jy ! Clean residual min=-0.001827 max=0.001755 Jy/beam ! Clean residual mean=-0.000001 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.0962066 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 69 components and 0.0962066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071964Jy sigma=0.000891 ! Fit after self-cal, rms=0.071982Jy sigma=0.000891 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071982Jy sigma=0.000891 ! Fit after self-cal, rms=0.071774Jy sigma=0.000891 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.295 mas, bmaj=6.128 mas, bpa=3.179 degrees ! Estimated noise=569.097 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000589617 Jy ! Component: 100 - total flux cleaned = 0.000643094 Jy ! Component: 150 - total flux cleaned = 0.000688395 Jy ! Component: 200 - total flux cleaned = 0.000748239 Jy ! Total flux subtracted in 200 components = 0.000748239 Jy ! Clean residual min=-0.001891 max=0.001810 Jy/beam ! Clean residual mean=-0.000001 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.0969548 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 71 components and 0.0969548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071752Jy sigma=0.000891 ! Fit after self-cal, rms=0.071781Jy sigma=0.000891 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.97386e-05 Jy ! Component: 100 - total flux cleaned = 5.02727e-05 Jy ! Component: 150 - total flux cleaned = 8.51579e-05 Jy ! Component: 200 - total flux cleaned = 0.000150822 Jy ! Total flux subtracted in 200 components = 0.000150822 Jy ! Clean residual min=-0.001906 max=0.001785 Jy/beam ! Clean residual mean=-0.000001 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.0971057 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 75 components and 0.0971056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071769Jy sigma=0.000891 ! Fit after self-cal, rms=0.071780Jy sigma=0.000891 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071780Jy sigma=0.000891 ! Fit after self-cal, rms=0.071613Jy sigma=0.000891 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.919 mas, bmaj=10.2 mas, bpa=9.263 degrees ! Estimated noise=674.809 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000239736 Jy ! Component: 100 - total flux cleaned = 0.000437075 Jy ! Component: 150 - total flux cleaned = 0.000613127 Jy ! Component: 200 - total flux cleaned = 0.000715858 Jy ! Total flux subtracted in 200 components = 0.000715858 Jy ! Clean residual min=-0.001474 max=0.001559 Jy/beam ! Clean residual mean=-0.000001 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.0978215 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 80 components and 0.0978215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071613Jy sigma=0.000891 ! Fit after self-cal, rms=0.071616Jy sigma=0.000891 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.73184e-05 Jy ! Component: 100 - total flux cleaned = 4.72112e-06 Jy ! Component: 150 - total flux cleaned = 4.95697e-05 Jy ! Component: 200 - total flux cleaned = 8.07005e-05 Jy ! Total flux subtracted in 200 components = 8.07005e-05 Jy ! Clean residual min=-0.001481 max=0.001534 Jy/beam ! Clean residual mean=-0.000001 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.0979022 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 87 components and 0.0979022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071618Jy sigma=0.000891 ! Fit after self-cal, rms=0.071616Jy sigma=0.000891 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.287 mas, bmaj=6.122 mas, bpa=3.333 degrees ! Estimated noise=569.128 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.287 x 6.122 at 3.333 degrees (North through East) ! Clean map min=-0.0018711 max=0.083101 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.69 mas, bmaj=5.283 mas, bpa=1.744 degrees ! Estimated noise=815.192 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0633925 Jy ! Component: 100 - total flux cleaned = 0.0801536 Jy ! Component: 150 - total flux cleaned = 0.0872323 Jy ! Component: 200 - total flux cleaned = 0.0908284 Jy ! Total flux subtracted in 200 components = 0.0908284 Jy ! Clean residual min=-0.002803 max=0.002905 Jy/beam ! Clean residual mean=-0.000001 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.0908284 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.0908284 Jy ! Inverting map and beam ! Estimated beam: bmin=3.287 mas, bmaj=6.122 mas, bpa=3.333 degrees ! Estimated noise=569.128 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-108.5, -119). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0030512 Jy ! Component: 100 - total flux cleaned = 0.00484181 Jy ! Component: 150 - total flux cleaned = 0.0056969 Jy ! Component: 200 - total flux cleaned = 0.00600266 Jy ! Total flux subtracted in 200 components = 0.00600266 Jy ! Clean residual min=-0.002089 max=0.001666 Jy/beam ! Clean residual mean=-0.000001 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.0968311 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 43 components and 0.0968311 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.919 mas, bmaj=10.2 mas, bpa=9.263 degrees ! Estimated noise=674.809 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000989314 Jy ! Component: 100 - total flux cleaned = 0.00140421 Jy ! Component: 150 - total flux cleaned = 0.00159936 Jy ! Component: 200 - total flux cleaned = 0.00169477 Jy ! Total flux subtracted in 200 components = 0.00169477 Jy ! Clean residual min=-0.001504 max=0.001569 Jy/beam ! Clean residual mean=-0.000000 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.0985259 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.40824e-05 Jy ! Component: 100 - total flux cleaned = 0.000122892 Jy ! Component: 150 - total flux cleaned = 0.000175882 Jy ! Component: 200 - total flux cleaned = 0.000207985 Jy ! Total flux subtracted in 200 components = 0.000207985 Jy ! Clean residual min=-0.001409 max=0.001554 Jy/beam ! Clean residual mean=-0.000000 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.0987338 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 73 components and 0.0987338 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.287 mas, bmaj=6.122 mas, bpa=3.333 degrees ! Estimated noise=569.128 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000462809 Jy ! Component: 100 - total flux cleaned = -0.000490232 Jy ! Component: 150 - total flux cleaned = -0.000489594 Jy ! Component: 200 - total flux cleaned = -0.000489577 Jy ! Total flux subtracted in 200 components = -0.000489577 Jy ! Clean residual min=-0.001919 max=0.001493 Jy/beam ! Clean residual mean=-0.000000 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.0982443 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 94 components and 0.0982442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071581Jy sigma=0.000891 ! Fit after self-cal, rms=0.071545Jy sigma=0.000890 wmodel J2155+1914_S_2014_01_04_pus_map.mod ! Writing 94 model components to file: J2155+1914_S_2014_01_04_pus_map.mod wobs J2155+1914_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J2155+1914_S_2014_01_04_pus_uvs.fits wwins J2155+1914_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J2155+1914_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000703275 Jy ! Component: 100 - total flux cleaned = -0.000760452 Jy ! Component: 150 - total flux cleaned = -0.000884854 Jy ! Component: 200 - total flux cleaned = -0.000932294 Jy ! Component: 250 - total flux cleaned = -0.0010459 Jy ! Component: 300 - total flux cleaned = -0.00108947 Jy ! Component: 350 - total flux cleaned = -0.00113179 Jy ! Component: 400 - total flux cleaned = -0.00119259 Jy ! Component: 450 - total flux cleaned = -0.00131013 Jy ! Component: 500 - total flux cleaned = -0.00142439 Jy ! Component: 550 - total flux cleaned = -0.00155382 Jy ! Component: 600 - total flux cleaned = -0.00162618 Jy ! Component: 650 - total flux cleaned = -0.001714 Jy ! Component: 700 - total flux cleaned = -0.00179975 Jy ! Component: 750 - total flux cleaned = -0.00184995 Jy ! Component: 800 - total flux cleaned = -0.00191517 Jy ! Component: 850 - total flux cleaned = -0.00193119 Jy ! Component: 900 - total flux cleaned = -0.00199368 Jy ! Component: 950 - total flux cleaned = -0.00206996 Jy ! Component: 1000 - total flux cleaned = -0.00208511 Jy ! Component: 1050 - total flux cleaned = -0.00217318 Jy ! Component: 1100 - total flux cleaned = -0.00218758 Jy ! Component: 1150 - total flux cleaned = -0.00224419 Jy ! Component: 1200 - total flux cleaned = -0.0022723 Jy ! Component: 1250 - total flux cleaned = -0.00235438 Jy ! Component: 1300 - total flux cleaned = -0.002381 Jy ! Component: 1350 - total flux cleaned = -0.00244731 Jy ! Component: 1400 - total flux cleaned = -0.00249954 Jy ! Component: 1450 - total flux cleaned = -0.002538 Jy ! Component: 1500 - total flux cleaned = -0.00257584 Jy ! Component: 1550 - total flux cleaned = -0.0026255 Jy ! Component: 1600 - total flux cleaned = -0.0026621 Jy ! Component: 1650 - total flux cleaned = -0.00268649 Jy ! Component: 1700 - total flux cleaned = -0.00272211 Jy ! Component: 1750 - total flux cleaned = -0.00274541 Jy ! Component: 1800 - total flux cleaned = -0.0027799 Jy ! Component: 1850 - total flux cleaned = -0.00277981 Jy ! Component: 1900 - total flux cleaned = -0.00283597 Jy ! Component: 1950 - total flux cleaned = -0.0028469 Jy ! Component: 2000 - total flux cleaned = -0.0028576 Jy ! Component: 2050 - total flux cleaned = -0.00287903 Jy ! Component: 2100 - total flux cleaned = -0.00288959 Jy ! Component: 2150 - total flux cleaned = -0.00287928 Jy ! Component: 2200 - total flux cleaned = -0.00293156 Jy ! Component: 2250 - total flux cleaned = -0.00296232 Jy ! Component: 2300 - total flux cleaned = -0.00297236 Jy ! Component: 2350 - total flux cleaned = -0.00296226 Jy ! Component: 2400 - total flux cleaned = -0.00301219 Jy ! Component: 2450 - total flux cleaned = -0.00301223 Jy ! Component: 2500 - total flux cleaned = -0.00304176 Jy ! Component: 2550 - total flux cleaned = -0.00310988 Jy ! Component: 2600 - total flux cleaned = -0.00313884 Jy ! Component: 2650 - total flux cleaned = -0.00318652 Jy ! Component: 2700 - total flux cleaned = -0.00322431 Jy ! Component: 2750 - total flux cleaned = -0.00325243 Jy ! Component: 2800 - total flux cleaned = -0.00329891 Jy ! Component: 2850 - total flux cleaned = -0.00333578 Jy ! Component: 2900 - total flux cleaned = -0.00338146 Jy ! Component: 2950 - total flux cleaned = -0.00342668 Jy ! Component: 3000 - total flux cleaned = -0.00345368 Jy ! Component: 3050 - total flux cleaned = -0.00349824 Jy ! Component: 3100 - total flux cleaned = -0.00356004 Jy ! Component: 3150 - total flux cleaned = -0.0035689 Jy ! Component: 3200 - total flux cleaned = -0.0036298 Jy ! Component: 3250 - total flux cleaned = -0.00364705 Jy ! Component: 3300 - total flux cleaned = -0.0036727 Jy ! Component: 3350 - total flux cleaned = -0.00371517 Jy ! Component: 3400 - total flux cleaned = -0.00374883 Jy ! Component: 3450 - total flux cleaned = -0.00377392 Jy ! Component: 3500 - total flux cleaned = -0.00379872 Jy ! Component: 3550 - total flux cleaned = -0.00378234 Jy ! Component: 3600 - total flux cleaned = -0.00382332 Jy ! Component: 3650 - total flux cleaned = -0.0038395 Jy ! Component: 3700 - total flux cleaned = -0.00389595 Jy ! Component: 3750 - total flux cleaned = -0.00391984 Jy ! Component: 3800 - total flux cleaned = -0.0039437 Jy ! Component: 3850 - total flux cleaned = -0.00395953 Jy ! Component: 3900 - total flux cleaned = -0.00399898 Jy ! Component: 3950 - total flux cleaned = -0.0040458 Jy ! Component: 4000 - total flux cleaned = -0.00406908 Jy ! Component: 4050 - total flux cleaned = -0.00408458 Jy ! Total flux subtracted in 4096 components = -0.00415361 Jy ! Clean residual min=-0.000472 max=0.000487 Jy/beam ! Clean residual mean=0.000000 rms=0.000126 Jy/beam ! Combined flux in latest and established models = 0.0940906 Jy keep ! Adding 232 model components to the UV plane model. ! The established model now contains 326 components and 0.0940906 Jy ![Exited script file: muppet] wmap "J2155+1914_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.287 x 6.122 at 3.333 degrees (North through East) ! Clean map min=-0.001187 max=0.082666 Jy/beam ! Writing clean map to FITS file: J2155+1914_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0826661 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000126439 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.458854 0.458854 0.917708 1.83542 3.67083 7.34166 14.6833 29.3666 58.7333 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.082 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.287 x 6.122 at 3.333 degrees (North through East) ! Clean map min=-0.001187 max=0.082666 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2155+1914_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:36:42 2017