! Started logfile: J2150-1822_S_2015_03_17_pus_uvs.log on Fri Dec 30 23:10:20 2016 obs J2150-1822_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J2150-1822_S_2015_03_17_pus_uva.fits ! AN table 1: 123 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.873351 visibilities/baseline/integration-bin. ! Found source: J2150-1822 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 19336 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2150-1822_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.962339Jy sigma=0.009115 ! Fit after self-cal, rms=0.916135Jy sigma=0.008701 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.48 mas, bmaj=6.202 mas, bpa=-3.56 degrees ! Estimated noise=991.432 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0646517 Jy ! Component: 100 - total flux cleaned = 0.0805073 Jy ! Total flux subtracted in 100 components = 0.0805073 Jy ! Clean residual min=-0.004334 max=0.006381 Jy/beam ! Clean residual mean=-0.000007 rms=0.001177 Jy/beam ! Combined flux in latest and established models = 0.0805073 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0805073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090287Jy sigma=0.000782 ! Fit after self-cal, rms=0.090218Jy sigma=0.000782 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.993 mas, bmaj=7.358 mas, bpa=-4.408 degrees ! Estimated noise=547.086 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00942344 Jy ! Component: 100 - total flux cleaned = 0.0139689 Jy ! Component: 150 - total flux cleaned = 0.0163952 Jy ! Component: 200 - total flux cleaned = 0.0178348 Jy ! Total flux subtracted in 200 components = 0.0178348 Jy ! Clean residual min=-0.003140 max=0.002807 Jy/beam ! Clean residual mean=-0.000001 rms=0.000714 Jy/beam ! Combined flux in latest and established models = 0.098342 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 58 components and 0.0983421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089177Jy sigma=0.000774 ! Fit after self-cal, rms=0.089126Jy sigma=0.000774 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.86 HN 1.02 KP 1.09 ! LA 0.94 MK 0.98 NL 0.94 OV 1.00 ! PT 1.08 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.92 HN 1.08 KP 1.01 ! LA 0.95 MK 1.05 NL 1.06 OV 1.06 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.89 HN 1.13 KP 0.95 ! LA 0.77 MK 1.04 NL 1.15 OV 1.01 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 0.90 HN 1.04 KP 0.91 ! LA 0.82 MK 1.12 NL 1.03 OV 1.06 ! PT 1.03 SC 0.98 ! ! ! Fit before self-cal, rms=0.089126Jy sigma=0.000774 ! Fit after self-cal, rms=0.086540Jy sigma=0.000768 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.044 mas, bmaj=7.45 mas, bpa=-3.966 degrees ! Estimated noise=547.697 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000609583 Jy ! Component: 100 - total flux cleaned = -0.000642762 Jy ! Component: 150 - total flux cleaned = -0.000683342 Jy ! Component: 200 - total flux cleaned = -0.000731039 Jy ! Total flux subtracted in 200 components = -0.000731039 Jy ! Clean residual min=-0.001761 max=0.001933 Jy/beam ! Clean residual mean=0.000001 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.097611 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 72 components and 0.097611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086530Jy sigma=0.000768 ! Fit after self-cal, rms=0.086497Jy sigma=0.000767 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086497Jy sigma=0.000767 ! Fit after self-cal, rms=0.088583Jy sigma=0.000766 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.056 mas, bmaj=7.449 mas, bpa=-4.187 degrees ! Estimated noise=547.924 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000252469 Jy ! Component: 100 - total flux cleaned = -0.000265596 Jy ! Component: 150 - total flux cleaned = -0.000289572 Jy ! Component: 200 - total flux cleaned = -0.00032186 Jy ! Total flux subtracted in 200 components = -0.00032186 Jy ! Clean residual min=-0.001462 max=0.001579 Jy/beam ! Clean residual mean=-0.000000 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.0972891 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 79 components and 0.0972891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088579Jy sigma=0.000766 ! Fit after self-cal, rms=0.088632Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.21169e-05 Jy ! Component: 100 - total flux cleaned = -6.01476e-05 Jy ! Component: 150 - total flux cleaned = -7.65361e-05 Jy ! Component: 200 - total flux cleaned = -9.95308e-05 Jy ! Total flux subtracted in 200 components = -9.95308e-05 Jy ! Clean residual min=-0.001444 max=0.001582 Jy/beam ! Clean residual mean=-0.000000 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.0971896 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 82 components and 0.0971896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088630Jy sigma=0.000765 ! Fit after self-cal, rms=0.088631Jy sigma=0.000765 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088631Jy sigma=0.000765 ! Fit after self-cal, rms=0.088915Jy sigma=0.000765 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.062 mas, bmaj=7.454 mas, bpa=-4.237 degrees ! Estimated noise=548.357 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000214977 Jy ! Component: 100 - total flux cleaned = -0.000256577 Jy ! Component: 150 - total flux cleaned = -0.000284551 Jy ! Component: 200 - total flux cleaned = -0.000310045 Jy ! Total flux subtracted in 200 components = -0.000310045 Jy ! Clean residual min=-0.001444 max=0.001596 Jy/beam ! Clean residual mean=0.000000 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.0968796 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 83 components and 0.0968796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088912Jy sigma=0.000765 ! Fit after self-cal, rms=0.088916Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-108, -65.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000657293 Jy ! Component: 100 - total flux cleaned = 0.000563643 Jy ! Component: 150 - total flux cleaned = 0.000513515 Jy ! Component: 200 - total flux cleaned = 0.000491235 Jy ! Total flux subtracted in 200 components = 0.000491235 Jy ! Clean residual min=-0.001329 max=0.001390 Jy/beam ! Clean residual mean=-0.000000 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.0973708 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 105 components and 0.0973708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088889Jy sigma=0.000765 ! Fit after self-cal, rms=0.088887Jy sigma=0.000765 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088887Jy sigma=0.000765 ! Fit after self-cal, rms=0.088942Jy sigma=0.000765 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.52 mas, bmaj=15.01 mas, bpa=3.666 degrees ! Estimated noise=707.157 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.71678e-05 Jy ! Component: 100 - total flux cleaned = -0.000140742 Jy ! Component: 150 - total flux cleaned = -0.000198997 Jy ! Component: 200 - total flux cleaned = -0.000241644 Jy ! Total flux subtracted in 200 components = -0.000241644 Jy ! Clean residual min=-0.001490 max=0.001791 Jy/beam ! Clean residual mean=-0.000000 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.0971291 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 115 components and 0.0971291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088937Jy sigma=0.000765 ! Fit after self-cal, rms=0.088939Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.75123e-05 Jy ! Component: 100 - total flux cleaned = -6.15787e-05 Jy ! Component: 150 - total flux cleaned = -8.37708e-05 Jy ! Component: 200 - total flux cleaned = -0.000104343 Jy ! Total flux subtracted in 200 components = -0.000104343 Jy ! Clean residual min=-0.001504 max=0.001803 Jy/beam ! Clean residual mean=-0.000000 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.0970248 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 120 components and 0.0970248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088937Jy sigma=0.000765 ! Fit after self-cal, rms=0.088937Jy sigma=0.000765 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.066 mas, bmaj=7.46 mas, bpa=-4.317 degrees ! Estimated noise=547.919 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.066 x 7.46 at -4.317 degrees (North through East) ! Clean map min=-0.001327 max=0.085475 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.525 mas, bmaj=6.256 mas, bpa=-3.409 degrees ! Estimated noise=1010.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0657286 Jy ! Component: 100 - total flux cleaned = 0.0813789 Jy ! Component: 150 - total flux cleaned = 0.0880172 Jy ! Component: 200 - total flux cleaned = 0.0919383 Jy ! Total flux subtracted in 200 components = 0.0919383 Jy ! Clean residual min=-0.003484 max=0.003542 Jy/beam ! Clean residual mean=-0.000004 rms=0.000886 Jy/beam ! Combined flux in latest and established models = 0.0919383 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.0919383 Jy ! Inverting map and beam ! Estimated beam: bmin=3.066 mas, bmaj=7.46 mas, bpa=-4.317 degrees ! Estimated noise=547.919 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00277176 Jy ! Component: 100 - total flux cleaned = 0.00368708 Jy ! Component: 150 - total flux cleaned = 0.00406202 Jy ! Component: 200 - total flux cleaned = 0.00431289 Jy ! Total flux subtracted in 200 components = 0.00431289 Jy ! Clean residual min=-0.001389 max=0.001454 Jy/beam ! Clean residual mean=-0.000001 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.0962512 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 45 components and 0.0962512 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.52 mas, bmaj=15.01 mas, bpa=3.666 degrees ! Estimated noise=707.157 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000601998 Jy ! Component: 100 - total flux cleaned = 0.000640473 Jy ! Component: 150 - total flux cleaned = 0.000628062 Jy ! Component: 200 - total flux cleaned = 0.000616692 Jy ! Total flux subtracted in 200 components = 0.000616692 Jy ! Clean residual min=-0.001487 max=0.001787 Jy/beam ! Clean residual mean=-0.000001 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.0968679 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.08803e-05 Jy ! Component: 100 - total flux cleaned = -2.12083e-05 Jy ! Component: 150 - total flux cleaned = -3.05089e-05 Jy ! Component: 200 - total flux cleaned = -3.05743e-05 Jy ! Total flux subtracted in 200 components = -3.05743e-05 Jy ! Clean residual min=-0.001495 max=0.001782 Jy/beam ! Clean residual mean=-0.000001 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.0968373 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 68 components and 0.0968373 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.066 mas, bmaj=7.46 mas, bpa=-4.317 degrees ! Estimated noise=547.919 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.10266e-06 Jy ! Component: 100 - total flux cleaned = -4.44232e-05 Jy ! Component: 150 - total flux cleaned = -8.20349e-05 Jy ! Component: 200 - total flux cleaned = -0.000116707 Jy ! Total flux subtracted in 200 components = -0.000116707 Jy ! Clean residual min=-0.001337 max=0.001374 Jy/beam ! Clean residual mean=-0.000000 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.0967206 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 83 components and 0.0967206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088932Jy sigma=0.000765 ! Fit after self-cal, rms=0.088931Jy sigma=0.000765 wmodel J2150-1822_S_2015_03_17_pus_map.mod ! Writing 83 model components to file: J2150-1822_S_2015_03_17_pus_map.mod wobs J2150-1822_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J2150-1822_S_2015_03_17_pus_uvs.fits wwins J2150-1822_S_2015_03_17_pus_map.win ! wwins: Wrote 2 windows to J2150-1822_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000159404 Jy ! Component: 100 - total flux cleaned = 0.000159654 Jy ! Component: 150 - total flux cleaned = 6.72641e-05 Jy ! Component: 200 - total flux cleaned = 2.26745e-05 Jy ! Component: 250 - total flux cleaned = -2.01372e-05 Jy ! Component: 300 - total flux cleaned = -1.9556e-05 Jy ! Component: 350 - total flux cleaned = -3.99822e-05 Jy ! Component: 400 - total flux cleaned = -7.97546e-05 Jy ! Component: 450 - total flux cleaned = -0.000118872 Jy ! Component: 500 - total flux cleaned = -0.000157473 Jy ! Component: 550 - total flux cleaned = -0.000213875 Jy ! Component: 600 - total flux cleaned = -0.000195311 Jy ! Component: 650 - total flux cleaned = -0.000195508 Jy ! Component: 700 - total flux cleaned = -0.000195545 Jy ! Component: 750 - total flux cleaned = -0.000195715 Jy ! Component: 800 - total flux cleaned = -0.000230019 Jy ! Component: 850 - total flux cleaned = -0.000161951 Jy ! Component: 900 - total flux cleaned = -0.000162241 Jy ! Component: 950 - total flux cleaned = -0.000112916 Jy ! Component: 1000 - total flux cleaned = -9.66239e-05 Jy ! Component: 1050 - total flux cleaned = -8.04422e-05 Jy ! Component: 1100 - total flux cleaned = -1.71715e-05 Jy ! Component: 1150 - total flux cleaned = -1.70928e-05 Jy ! Component: 1200 - total flux cleaned = -1.7088e-06 Jy ! Component: 1250 - total flux cleaned = 4.41801e-05 Jy ! Component: 1300 - total flux cleaned = -8.52724e-07 Jy ! Component: 1350 - total flux cleaned = 5.88529e-05 Jy ! Component: 1400 - total flux cleaned = 8.81671e-05 Jy ! Component: 1450 - total flux cleaned = 0.000102788 Jy ! Component: 1500 - total flux cleaned = 0.000160282 Jy ! Component: 1550 - total flux cleaned = 0.000146072 Jy ! Component: 1600 - total flux cleaned = 0.000188066 Jy ! Component: 1650 - total flux cleaned = 0.000160185 Jy ! Component: 1700 - total flux cleaned = 0.000215187 Jy ! Component: 1750 - total flux cleaned = 0.000228573 Jy ! Component: 1800 - total flux cleaned = 0.000241909 Jy ! Component: 1850 - total flux cleaned = 0.000268349 Jy ! Component: 1900 - total flux cleaned = 0.000268572 Jy ! Component: 1950 - total flux cleaned = 0.00028172 Jy ! Component: 2000 - total flux cleaned = 0.000307579 Jy ! Component: 2050 - total flux cleaned = 0.000320602 Jy ! Component: 2100 - total flux cleaned = 0.000345842 Jy ! Component: 2150 - total flux cleaned = 0.00033331 Jy ! Component: 2200 - total flux cleaned = 0.000358157 Jy ! Component: 2250 - total flux cleaned = 0.000321347 Jy ! Component: 2300 - total flux cleaned = 0.000345848 Jy ! Component: 2350 - total flux cleaned = 0.000333828 Jy ! Component: 2400 - total flux cleaned = 0.000310145 Jy ! Component: 2450 - total flux cleaned = 0.000321986 Jy ! Component: 2500 - total flux cleaned = 0.000345245 Jy ! Component: 2550 - total flux cleaned = 0.000321795 Jy ! Component: 2600 - total flux cleaned = 0.000356048 Jy ! Component: 2650 - total flux cleaned = 0.000333314 Jy ! Component: 2700 - total flux cleaned = 0.00029947 Jy ! Component: 2750 - total flux cleaned = 0.000243519 Jy ! Component: 2800 - total flux cleaned = 0.00026587 Jy ! Component: 2850 - total flux cleaned = 0.000309647 Jy ! Component: 2900 - total flux cleaned = 0.000331272 Jy ! Component: 2950 - total flux cleaned = 0.00027708 Jy ! Component: 3000 - total flux cleaned = 0.000298465 Jy ! Component: 3050 - total flux cleaned = 0.000298412 Jy ! Component: 3100 - total flux cleaned = 0.000308957 Jy ! Component: 3150 - total flux cleaned = 0.00026697 Jy ! Component: 3200 - total flux cleaned = 0.000308708 Jy ! Component: 3250 - total flux cleaned = 0.000308697 Jy ! Component: 3300 - total flux cleaned = 0.000329194 Jy ! Component: 3350 - total flux cleaned = 0.000319039 Jy ! Component: 3400 - total flux cleaned = 0.00033936 Jy ! Component: 3450 - total flux cleaned = 0.000339294 Jy ! Component: 3500 - total flux cleaned = 0.000329335 Jy ! Component: 3550 - total flux cleaned = 0.000329309 Jy ! Component: 3600 - total flux cleaned = 0.000339148 Jy ! Component: 3650 - total flux cleaned = 0.000368443 Jy ! Component: 3700 - total flux cleaned = 0.000329562 Jy ! Component: 3750 - total flux cleaned = 0.000300638 Jy ! Component: 3800 - total flux cleaned = 0.00032929 Jy ! Component: 3850 - total flux cleaned = 0.000310236 Jy ! Component: 3900 - total flux cleaned = 0.00030076 Jy ! Component: 3950 - total flux cleaned = 0.000328825 Jy ! Component: 4000 - total flux cleaned = 0.000272908 Jy ! Component: 4050 - total flux cleaned = 0.000282219 Jy ! Total flux subtracted in 4096 components = 0.000273064 Jy ! Clean residual min=-0.000555 max=0.000707 Jy/beam ! Clean residual mean=0.000001 rms=0.000171 Jy/beam ! Combined flux in latest and established models = 0.0969937 Jy keep ! Adding 291 model components to the UV plane model. ! The established model now contains 374 components and 0.0969937 Jy ![Exited script file: muppet] wmap "J2150-1822_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.066 x 7.46 at -4.317 degrees (North through East) ! Clean map min=-0.0013653 max=0.085729 Jy/beam ! Writing clean map to FITS file: J2150-1822_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0857285 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000170074 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.595159 0.595159 1.19032 2.38063 4.76127 9.52254 19.0451 38.0901 76.1803 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.085 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.066 x 7.46 at -4.317 degrees (North through East) ! Clean map min=-0.0013653 max=0.085729 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2150-1822_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 23:10:25 2016