! Started logfile: J2150+1449_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:36:33 2017 obs J2150+1449_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J2150+1449_S_2014_01_04_pus_uva.fits ! AN table 1: 124 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J2150+1449 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 8928 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2150+1449_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 310 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 310 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 310 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 310 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.733101Jy sigma=0.009435 ! Fit after self-cal, rms=0.674490Jy sigma=0.008467 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.813 mas, bmaj=5.546 mas, bpa=1.515 degrees ! Estimated noise=956.461 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.30546 Jy ! Component: 100 - total flux cleaned = 0.45501 Jy ! Total flux subtracted in 100 components = 0.45501 Jy ! Clean residual min=-0.044731 max=0.076702 Jy/beam ! Clean residual mean=-0.000144 rms=0.017000 Jy/beam ! Combined flux in latest and established models = 0.45501 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.45501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263750Jy sigma=0.003371 ! Fit after self-cal, rms=0.262580Jy sigma=0.003363 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.299 mas, bmaj=6.164 mas, bpa=1.744 degrees ! Estimated noise=569.053 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.131135 Jy ! Component: 100 - total flux cleaned = 0.211148 Jy ! Component: 150 - total flux cleaned = 0.267466 Jy ! Component: 200 - total flux cleaned = 0.308487 Jy ! Total flux subtracted in 200 components = 0.308487 Jy ! Clean residual min=-0.045052 max=0.049497 Jy/beam ! Clean residual mean=-0.000026 rms=0.014966 Jy/beam ! Combined flux in latest and established models = 0.763498 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 73 components and 0.763497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172733Jy sigma=0.002144 ! Fit after self-cal, rms=0.172042Jy sigma=0.002138 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00* KP 1.00* LA 0.88 ! MK 1.25 NL 0.97 OV 1.00 PT 0.81 ! SC 1.28 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.00* KP 1.00* LA 0.85 ! MK 1.21 NL 1.05 OV 1.05 PT 0.79 ! SC 1.31 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* KP 1.00* LA 0.71 ! MK 1.21 NL 1.02 OV 0.99 PT 0.78 ! SC 1.31 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.27 FD 1.00* KP 1.00* LA 0.79 ! MK 1.17 NL 1.13 OV 1.09 PT 0.83 ! SC 1.30 ! ! ! Fit before self-cal, rms=0.172042Jy sigma=0.002138 ! Fit after self-cal, rms=0.136888Jy sigma=0.001513 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.572 mas, bmaj=6.664 mas, bpa=0.2346 degrees ! Estimated noise=609.813 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00127715 Jy ! Component: 100 - total flux cleaned = -0.000464314 Jy ! Component: 150 - total flux cleaned = 0.000668706 Jy ! Component: 200 - total flux cleaned = 0.00191538 Jy ! Total flux subtracted in 200 components = 0.00191538 Jy ! Clean residual min=-0.034542 max=0.038949 Jy/beam ! Clean residual mean=0.000075 rms=0.009458 Jy/beam ! Combined flux in latest and established models = 0.765413 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 78 components and 0.765413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135737Jy sigma=0.001497 ! Fit after self-cal, rms=0.135053Jy sigma=0.001494 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135053Jy sigma=0.001494 ! Fit after self-cal, rms=0.147642Jy sigma=0.001362 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.56 mas, bmaj=6.839 mas, bpa=-3.124 degrees ! Estimated noise=615.224 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00157631 Jy ! Component: 100 - total flux cleaned = -0.00137916 Jy ! Component: 150 - total flux cleaned = -0.000840936 Jy ! Component: 200 - total flux cleaned = -0.000329709 Jy ! Total flux subtracted in 200 components = -0.000329709 Jy ! Clean residual min=-0.028644 max=0.031276 Jy/beam ! Clean residual mean=0.000045 rms=0.007730 Jy/beam ! Combined flux in latest and established models = 0.765083 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 82 components and 0.765083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146812Jy sigma=0.001355 ! Fit after self-cal, rms=0.146759Jy sigma=0.001354 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000826812 Jy ! Component: 100 - total flux cleaned = -0.000474702 Jy ! Component: 150 - total flux cleaned = -0.0001342 Jy ! Component: 200 - total flux cleaned = 0.00034339 Jy ! Total flux subtracted in 200 components = 0.00034339 Jy ! Clean residual min=-0.028687 max=0.031099 Jy/beam ! Clean residual mean=0.000045 rms=0.007716 Jy/beam ! Combined flux in latest and established models = 0.765427 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 83 components and 0.765427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146081Jy sigma=0.001349 ! Fit after self-cal, rms=0.146017Jy sigma=0.001348 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146017Jy sigma=0.001348 ! Fit after self-cal, rms=0.143815Jy sigma=0.001347 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.561 mas, bmaj=6.807 mas, bpa=-2.64 degrees ! Estimated noise=612.593 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00142742 Jy ! Component: 100 - total flux cleaned = -0.000907371 Jy ! Component: 150 - total flux cleaned = -0.000409601 Jy ! Component: 200 - total flux cleaned = -9.4836e-05 Jy ! Total flux subtracted in 200 components = -9.4836e-05 Jy ! Clean residual min=-0.028250 max=0.031167 Jy/beam ! Clean residual mean=0.000044 rms=0.007633 Jy/beam ! Combined flux in latest and established models = 0.765332 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 83 components and 0.765332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143107Jy sigma=0.001342 ! Fit after self-cal, rms=0.143009Jy sigma=0.001341 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00091531 Jy ! Component: 100 - total flux cleaned = -0.000592786 Jy ! Component: 150 - total flux cleaned = -0.000286388 Jy ! Component: 200 - total flux cleaned = 0.000166164 Jy ! Total flux subtracted in 200 components = 0.000166164 Jy ! Clean residual min=-0.028229 max=0.031183 Jy/beam ! Clean residual mean=0.000044 rms=0.007619 Jy/beam ! Combined flux in latest and established models = 0.765498 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 83 components and 0.765498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142437Jy sigma=0.001337 ! Fit after self-cal, rms=0.142344Jy sigma=0.001337 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142344Jy sigma=0.001337 ! Fit after self-cal, rms=0.138423Jy sigma=0.001336 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.359 mas, bmaj=10.98 mas, bpa=9.981 degrees ! Estimated noise=642.236 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00500912 Jy ! Component: 100 - total flux cleaned = 0.00538573 Jy ! Component: 150 - total flux cleaned = 0.00613191 Jy ! Component: 200 - total flux cleaned = 0.00681223 Jy ! Total flux subtracted in 200 components = 0.00681223 Jy ! Clean residual min=-0.036738 max=0.038823 Jy/beam ! Clean residual mean=0.000082 rms=0.010717 Jy/beam ! Combined flux in latest and established models = 0.77231 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 85 components and 0.77231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139410Jy sigma=0.001339 ! Fit after self-cal, rms=0.139008Jy sigma=0.001336 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000349334 Jy ! Component: 100 - total flux cleaned = 0.000484918 Jy ! Component: 150 - total flux cleaned = 0.00126413 Jy ! Component: 200 - total flux cleaned = 0.00185831 Jy ! Total flux subtracted in 200 components = 0.00185831 Jy ! Clean residual min=-0.036427 max=0.038191 Jy/beam ! Clean residual mean=0.000084 rms=0.010629 Jy/beam ! Combined flux in latest and established models = 0.774168 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 85 components and 0.774168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139630Jy sigma=0.001340 ! Fit after self-cal, rms=0.139327Jy sigma=0.001337 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.554 mas, bmaj=6.754 mas, bpa=-1.964 degrees ! Estimated noise=608.083 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.554 x 6.754 at -1.964 degrees (North through East) ! Clean map min=-0.027803 max=0.40247 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.968 mas, bmaj=5.974 mas, bpa=-2.825 degrees ! Estimated noise=1078.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.332981 Jy ! Component: 100 - total flux cleaned = 0.48431 Jy ! Component: 150 - total flux cleaned = 0.570661 Jy ! Component: 200 - total flux cleaned = 0.625153 Jy ! Total flux subtracted in 200 components = 0.625153 Jy ! Clean residual min=-0.035825 max=0.035529 Jy/beam ! Clean residual mean=-0.000033 rms=0.009072 Jy/beam ! Combined flux in latest and established models = 0.625153 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 47 model components to the UV plane model. ! The established model now contains 47 components and 0.625153 Jy ! Inverting map and beam ! Estimated beam: bmin=3.554 mas, bmaj=6.754 mas, bpa=-1.964 degrees ! Estimated noise=608.083 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0475078 Jy ! Component: 100 - total flux cleaned = 0.0768805 Jy ! Component: 150 - total flux cleaned = 0.0960881 Jy ! Component: 200 - total flux cleaned = 0.108784 Jy ! Total flux subtracted in 200 components = 0.108784 Jy ! Clean residual min=-0.029916 max=0.034612 Jy/beam ! Clean residual mean=0.000023 rms=0.008161 Jy/beam ! Combined flux in latest and established models = 0.733937 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 59 components and 0.733937 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.359 mas, bmaj=10.98 mas, bpa=9.981 degrees ! Estimated noise=642.236 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0160922 Jy ! Component: 100 - total flux cleaned = 0.0190136 Jy ! Component: 150 - total flux cleaned = 0.0207686 Jy ! Component: 200 - total flux cleaned = 0.0221516 Jy ! Total flux subtracted in 200 components = 0.0221516 Jy ! Clean residual min=-0.038099 max=0.040322 Jy/beam ! Clean residual mean=0.000065 rms=0.011497 Jy/beam ! Combined flux in latest and established models = 0.756089 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.001316 Jy ! Component: 100 - total flux cleaned = 0.00258079 Jy ! Component: 150 - total flux cleaned = 0.00378641 Jy ! Component: 200 - total flux cleaned = 0.00494763 Jy ! Total flux subtracted in 200 components = 0.00494763 Jy ! Clean residual min=-0.037562 max=0.039838 Jy/beam ! Clean residual mean=0.000070 rms=0.011215 Jy/beam ! Combined flux in latest and established models = 0.761036 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 66 components and 0.761036 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.554 mas, bmaj=6.754 mas, bpa=-1.964 degrees ! Estimated noise=608.083 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00220903 Jy ! Component: 100 - total flux cleaned = -0.000749937 Jy ! Component: 150 - total flux cleaned = 0.000133355 Jy ! Component: 200 - total flux cleaned = 0.00112844 Jy ! Total flux subtracted in 200 components = 0.00112844 Jy ! Clean residual min=-0.027370 max=0.031061 Jy/beam ! Clean residual mean=0.000040 rms=0.007585 Jy/beam ! Combined flux in latest and established models = 0.762165 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 69 components and 0.762165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139314Jy sigma=0.001342 ! Fit after self-cal, rms=0.138677Jy sigma=0.001340 wmodel J2150+1449_S_2014_01_04_pus_map.mod ! Writing 69 model components to file: J2150+1449_S_2014_01_04_pus_map.mod wobs J2150+1449_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J2150+1449_S_2014_01_04_pus_uvs.fits wwins J2150+1449_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J2150+1449_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118468 Jy ! Component: 100 - total flux cleaned = 0.0181153 Jy ! Component: 150 - total flux cleaned = 0.0224357 Jy ! Component: 200 - total flux cleaned = 0.0260167 Jy ! Component: 250 - total flux cleaned = 0.0300803 Jy ! Component: 300 - total flux cleaned = 0.0339153 Jy ! Component: 350 - total flux cleaned = 0.0362148 Jy ! Component: 400 - total flux cleaned = 0.039003 Jy ! Component: 450 - total flux cleaned = 0.0404697 Jy ! Component: 500 - total flux cleaned = 0.0432603 Jy ! Component: 550 - total flux cleaned = 0.0456358 Jy ! Component: 600 - total flux cleaned = 0.0476416 Jy ! Component: 650 - total flux cleaned = 0.0495528 Jy ! Component: 700 - total flux cleaned = 0.0509338 Jy ! Component: 750 - total flux cleaned = 0.052687 Jy ! Component: 800 - total flux cleaned = 0.0535225 Jy ! Component: 850 - total flux cleaned = 0.0547381 Jy ! Component: 900 - total flux cleaned = 0.0557101 Jy ! Component: 950 - total flux cleaned = 0.0570069 Jy ! Component: 1000 - total flux cleaned = 0.058248 Jy ! Component: 1050 - total flux cleaned = 0.0594445 Jy ! Component: 1100 - total flux cleaned = 0.0602609 Jy ! Component: 1150 - total flux cleaned = 0.0610505 Jy ! Component: 1200 - total flux cleaned = 0.0619582 Jy ! Component: 1250 - total flux cleaned = 0.0618125 Jy ! Component: 1300 - total flux cleaned = 0.0623823 Jy ! Component: 1350 - total flux cleaned = 0.0623782 Jy ! Component: 1400 - total flux cleaned = 0.0622494 Jy ! Component: 1450 - total flux cleaned = 0.0622536 Jy ! Component: 1500 - total flux cleaned = 0.0626332 Jy ! Component: 1550 - total flux cleaned = 0.062755 Jy ! Component: 1600 - total flux cleaned = 0.0628689 Jy ! Component: 1650 - total flux cleaned = 0.0626406 Jy ! Component: 1700 - total flux cleaned = 0.0623166 Jy ! Component: 1750 - total flux cleaned = 0.0617861 Jy ! Component: 1800 - total flux cleaned = 0.0612683 Jy ! Component: 1850 - total flux cleaned = 0.0606688 Jy ! Component: 1900 - total flux cleaned = 0.0598012 Jy ! Component: 1950 - total flux cleaned = 0.0595234 Jy ! Component: 2000 - total flux cleaned = 0.0591619 Jy ! Component: 2050 - total flux cleaned = 0.0591623 Jy ! Component: 2100 - total flux cleaned = 0.0589871 Jy ! Component: 2150 - total flux cleaned = 0.0587319 Jy ! Component: 2200 - total flux cleaned = 0.0585652 Jy ! Component: 2250 - total flux cleaned = 0.0583272 Jy ! Component: 2300 - total flux cleaned = 0.0583268 Jy ! Component: 2350 - total flux cleaned = 0.0582512 Jy ! Component: 2400 - total flux cleaned = 0.0584 Jy ! Component: 2450 - total flux cleaned = 0.0583276 Jy ! Component: 2500 - total flux cleaned = 0.0581851 Jy ! Component: 2550 - total flux cleaned = 0.0584628 Jy ! Component: 2600 - total flux cleaned = 0.0583948 Jy ! Component: 2650 - total flux cleaned = 0.0585285 Jy ! Component: 2700 - total flux cleaned = 0.0587233 Jy ! Component: 2750 - total flux cleaned = 0.0587239 Jy ! Component: 2800 - total flux cleaned = 0.0590344 Jy ! Component: 2850 - total flux cleaned = 0.0590958 Jy ! Component: 2900 - total flux cleaned = 0.0590957 Jy ! Component: 2950 - total flux cleaned = 0.0593848 Jy ! Component: 3000 - total flux cleaned = 0.0592699 Jy ! Component: 3050 - total flux cleaned = 0.0593827 Jy ! Component: 3100 - total flux cleaned = 0.0594366 Jy ! Component: 3150 - total flux cleaned = 0.0594904 Jy ! Component: 3200 - total flux cleaned = 0.0595951 Jy ! Component: 3250 - total flux cleaned = 0.0597497 Jy ! Component: 3300 - total flux cleaned = 0.0595974 Jy ! Component: 3350 - total flux cleaned = 0.0595483 Jy ! Component: 3400 - total flux cleaned = 0.0595952 Jy ! Component: 3450 - total flux cleaned = 0.0594016 Jy ! Component: 3500 - total flux cleaned = 0.0593071 Jy ! Component: 3550 - total flux cleaned = 0.059121 Jy ! Component: 3600 - total flux cleaned = 0.0591199 Jy ! Component: 3650 - total flux cleaned = 0.0588039 Jy ! Component: 3700 - total flux cleaned = 0.0586706 Jy ! Component: 3750 - total flux cleaned = 0.0586263 Jy ! Component: 3800 - total flux cleaned = 0.0587125 Jy ! Component: 3850 - total flux cleaned = 0.0588395 Jy ! Component: 3900 - total flux cleaned = 0.0588811 Jy ! Component: 3950 - total flux cleaned = 0.0589633 Jy ! Component: 4000 - total flux cleaned = 0.0589636 Jy ! Component: 4050 - total flux cleaned = 0.0590851 Jy ! Total flux subtracted in 4096 components = 0.0591249 Jy ! Clean residual min=-0.002423 max=0.002135 Jy/beam ! Clean residual mean=-0.000004 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.821289 Jy keep ! Adding 265 model components to the UV plane model. ! The established model now contains 334 components and 0.82129 Jy ![Exited script file: muppet] wmap "J2150+1449_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.554 x 6.754 at -1.964 degrees (North through East) ! Clean map min=-0.0089781 max=0.41085 Jy/beam ! Writing clean map to FITS file: J2150+1449_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.410848 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000636806 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.464995 0.464995 0.929989 1.85998 3.71996 7.43991 14.8798 29.7596 59.5193 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.41 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.554 x 6.754 at -1.964 degrees (North through East) ! Clean map min=-0.0089781 max=0.41085 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2150+1449_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:36:38 2017