! Started logfile: J2146-2326_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:35:21 2017 obs J2146-2326_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J2146-2326_S_2015_01_23_pus_uva.fits ! AN table 1: 123 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.781933 visibilities/baseline/integration-bin. ! Found source: J2146-2326 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 17312 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2146-2326_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 138 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 138 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 138 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 138 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.989618Jy sigma=0.008972 ! Fit after self-cal, rms=0.945389Jy sigma=0.008589 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.424 mas, bmaj=6.209 mas, bpa=-7.011 degrees ! Estimated noise=992.299 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0424697 Jy ! Component: 100 - total flux cleaned = 0.052924 Jy ! Total flux subtracted in 100 components = 0.052924 Jy ! Clean residual min=-0.003393 max=0.004390 Jy/beam ! Clean residual mean=0.000009 rms=0.000971 Jy/beam ! Combined flux in latest and established models = 0.052924 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.052924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092474Jy sigma=0.000778 ! Fit after self-cal, rms=0.091836Jy sigma=0.000772 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.892 mas, bmaj=7.329 mas, bpa=-5.846 degrees ! Estimated noise=601.872 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00866569 Jy ! Component: 100 - total flux cleaned = 0.0128894 Jy ! Component: 150 - total flux cleaned = 0.0152709 Jy ! Component: 200 - total flux cleaned = 0.0166798 Jy ! Total flux subtracted in 200 components = 0.0166798 Jy ! Clean residual min=-0.002714 max=0.004041 Jy/beam ! Clean residual mean=-0.000000 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.0696038 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 30 components and 0.0696038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090985Jy sigma=0.000765 ! Fit after self-cal, rms=0.090962Jy sigma=0.000765 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 1.06 KP 1.01 ! LA 1.02 MK 1.03 NL 1.17 OV 0.98 ! PT 0.96 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 1.12 KP 0.94 ! LA 1.00 MK 1.04 NL 1.27 OV 1.07 ! PT 1.03 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 1.00 KP 0.89 ! LA 0.79 MK 0.99 NL 1.15 OV 0.92 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.06 KP 0.81 ! LA 0.80 MK 1.04 NL 1.00 OV 0.97 ! PT 1.00 SC 0.92 ! ! ! Fit before self-cal, rms=0.090962Jy sigma=0.000765 ! Fit after self-cal, rms=0.089553Jy sigma=0.000761 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.926 mas, bmaj=7.374 mas, bpa=-5.389 degrees ! Estimated noise=600.234 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000397511 Jy ! Component: 100 - total flux cleaned = 0.000460602 Jy ! Component: 150 - total flux cleaned = 0.000515117 Jy ! Component: 200 - total flux cleaned = 0.000563367 Jy ! Total flux subtracted in 200 components = 0.000563367 Jy ! Clean residual min=-0.002138 max=0.002893 Jy/beam ! Clean residual mean=-0.000001 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.0701672 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 36 components and 0.0701672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089532Jy sigma=0.000761 ! Fit after self-cal, rms=0.089596Jy sigma=0.000760 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089596Jy sigma=0.000760 ! Fit after self-cal, rms=0.089919Jy sigma=0.000760 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.932 mas, bmaj=7.336 mas, bpa=-5.095 degrees ! Estimated noise=602.463 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000205258 Jy ! Component: 100 - total flux cleaned = 0.000294857 Jy ! Component: 150 - total flux cleaned = 0.00031466 Jy ! Component: 200 - total flux cleaned = 0.000331828 Jy ! Total flux subtracted in 200 components = 0.000331828 Jy ! Clean residual min=-0.002135 max=0.002675 Jy/beam ! Clean residual mean=0.000001 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.070499 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 41 components and 0.070499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089909Jy sigma=0.000760 ! Fit after self-cal, rms=0.089925Jy sigma=0.000759 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (16, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00234669 Jy ! Component: 100 - total flux cleaned = 0.0035106 Jy ! Component: 150 - total flux cleaned = 0.00367226 Jy ! Component: 200 - total flux cleaned = 0.0036992 Jy ! Total flux subtracted in 200 components = 0.0036992 Jy ! Clean residual min=-0.001971 max=0.002207 Jy/beam ! Clean residual mean=0.000000 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.0741982 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 64 components and 0.0741982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089862Jy sigma=0.000759 ! Fit after self-cal, rms=0.089840Jy sigma=0.000759 ! Inverting map ! Added new window around map position (61, -42.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185966 Jy ! Component: 100 - total flux cleaned = 0.00228825 Jy ! Component: 150 - total flux cleaned = 0.00244626 Jy ! Component: 200 - total flux cleaned = 0.00261871 Jy ! Total flux subtracted in 200 components = 0.00261871 Jy ! Clean residual min=-0.001861 max=0.001772 Jy/beam ! Clean residual mean=0.000002 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.0768169 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 80 components and 0.0768169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089785Jy sigma=0.000758 ! Fit after self-cal, rms=0.089778Jy sigma=0.000758 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089778Jy sigma=0.000758 ! Fit after self-cal, rms=0.089397Jy sigma=0.000758 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.926 mas, bmaj=7.297 mas, bpa=-4.954 degrees ! Estimated noise=598.811 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114729 Jy ! Component: 100 - total flux cleaned = 0.00129344 Jy ! Component: 150 - total flux cleaned = 0.00141931 Jy ! Component: 200 - total flux cleaned = 0.00150027 Jy ! Total flux subtracted in 200 components = 0.00150027 Jy ! Clean residual min=-0.001780 max=0.001777 Jy/beam ! Clean residual mean=0.000001 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.0783172 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 85 components and 0.0783172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089369Jy sigma=0.000758 ! Fit after self-cal, rms=0.089375Jy sigma=0.000758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000360178 Jy ! Component: 100 - total flux cleaned = 0.0003317 Jy ! Component: 150 - total flux cleaned = 0.000307182 Jy ! Component: 200 - total flux cleaned = 0.00028438 Jy ! Total flux subtracted in 200 components = 0.00028438 Jy ! Clean residual min=-0.001792 max=0.001763 Jy/beam ! Clean residual mean=0.000001 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.0786016 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 94 components and 0.0786015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089359Jy sigma=0.000758 ! Fit after self-cal, rms=0.089357Jy sigma=0.000757 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089357Jy sigma=0.000757 ! Fit after self-cal, rms=0.089273Jy sigma=0.000757 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.345 mas, bmaj=16.06 mas, bpa=-2.16 degrees ! Estimated noise=777.217 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00091859 Jy ! Component: 100 - total flux cleaned = 0.00119764 Jy ! Component: 150 - total flux cleaned = 0.00117679 Jy ! Component: 200 - total flux cleaned = 0.00117555 Jy ! Total flux subtracted in 200 components = 0.00117555 Jy ! Clean residual min=-0.001913 max=0.001935 Jy/beam ! Clean residual mean=-0.000003 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.0797771 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 109 components and 0.0797771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089270Jy sigma=0.000757 ! Fit after self-cal, rms=0.089268Jy sigma=0.000757 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123807 Jy ! Component: 100 - total flux cleaned = 0.000105501 Jy ! Component: 150 - total flux cleaned = 7.22415e-05 Jy ! Component: 200 - total flux cleaned = 5.69316e-05 Jy ! Total flux subtracted in 200 components = 5.69316e-05 Jy ! Clean residual min=-0.001883 max=0.001903 Jy/beam ! Clean residual mean=-0.000002 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.079834 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 124 components and 0.079834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089267Jy sigma=0.000757 ! Fit after self-cal, rms=0.089264Jy sigma=0.000757 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.92 mas, bmaj=7.278 mas, bpa=-4.952 degrees ! Estimated noise=597.687 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.92 x 7.278 at -4.952 degrees (North through East) ! Clean map min=-0.0018038 max=0.057764 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.435 mas, bmaj=6.12 mas, bpa=-6.081 degrees ! Estimated noise=985.834 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0420336 Jy ! Component: 100 - total flux cleaned = 0.0537831 Jy ! Component: 150 - total flux cleaned = 0.0598107 Jy ! Component: 200 - total flux cleaned = 0.0641815 Jy ! Total flux subtracted in 200 components = 0.0641815 Jy ! Clean residual min=-0.003698 max=0.003429 Jy/beam ! Clean residual mean=0.000004 rms=0.000892 Jy/beam ! Combined flux in latest and established models = 0.0641815 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0641815 Jy ! Inverting map and beam ! Estimated beam: bmin=2.92 mas, bmaj=7.278 mas, bpa=-4.952 degrees ! Estimated noise=597.687 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00536267 Jy ! Component: 100 - total flux cleaned = 0.00864124 Jy ! Component: 150 - total flux cleaned = 0.0106347 Jy ! Component: 200 - total flux cleaned = 0.0119114 Jy ! Total flux subtracted in 200 components = 0.0119114 Jy ! Clean residual min=-0.001954 max=0.002447 Jy/beam ! Clean residual mean=0.000003 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.0760929 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 55 components and 0.0760929 Jy ! Inverting map ! Added new window around map position (-6, 9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00197141 Jy ! Component: 100 - total flux cleaned = 0.00239957 Jy ! Component: 150 - total flux cleaned = 0.00291966 Jy ! Component: 200 - total flux cleaned = 0.00323749 Jy ! Total flux subtracted in 200 components = 0.00323749 Jy ! Clean residual min=-0.001768 max=0.001818 Jy/beam ! Clean residual mean=0.000001 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.0793304 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 77 components and 0.0793304 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.345 mas, bmaj=16.06 mas, bpa=-2.16 degrees ! Estimated noise=777.217 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123136 Jy ! Component: 100 - total flux cleaned = 0.00165998 Jy ! Component: 150 - total flux cleaned = 0.00193133 Jy ! Component: 200 - total flux cleaned = 0.00204457 Jy ! Total flux subtracted in 200 components = 0.00204457 Jy ! Clean residual min=-0.001983 max=0.001886 Jy/beam ! Clean residual mean=-0.000000 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.0813749 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.08878e-05 Jy ! Component: 100 - total flux cleaned = 5.94472e-05 Jy ! Component: 150 - total flux cleaned = 6.05842e-05 Jy ! Component: 200 - total flux cleaned = 4.5091e-05 Jy ! Total flux subtracted in 200 components = 4.5091e-05 Jy ! Clean residual min=-0.002005 max=0.001879 Jy/beam ! Clean residual mean=-0.000001 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.08142 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 106 components and 0.08142 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.92 mas, bmaj=7.278 mas, bpa=-4.952 degrees ! Estimated noise=597.687 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000645763 Jy ! Component: 100 - total flux cleaned = -0.000863393 Jy ! Component: 150 - total flux cleaned = -0.00096252 Jy ! Component: 200 - total flux cleaned = -0.00102536 Jy ! Total flux subtracted in 200 components = -0.00102536 Jy ! Clean residual min=-0.001744 max=0.001712 Jy/beam ! Clean residual mean=-0.000001 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.0803947 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 120 components and 0.0803946 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089260Jy sigma=0.000757 ! Fit after self-cal, rms=0.089259Jy sigma=0.000757 wmodel J2146-2326_S_2015_01_23_pus_map.mod ! Writing 120 model components to file: J2146-2326_S_2015_01_23_pus_map.mod wobs J2146-2326_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J2146-2326_S_2015_01_23_pus_uvs.fits wwins J2146-2326_S_2015_01_23_pus_map.win ! wwins: Wrote 4 windows to J2146-2326_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000171553 Jy ! Component: 100 - total flux cleaned = -0.000142428 Jy ! Component: 150 - total flux cleaned = -0.000227694 Jy ! Component: 200 - total flux cleaned = -0.000335737 Jy ! Component: 250 - total flux cleaned = -0.000412925 Jy ! Component: 300 - total flux cleaned = -0.000437661 Jy ! Component: 350 - total flux cleaned = -0.000437487 Jy ! Component: 400 - total flux cleaned = -0.000437644 Jy ! Component: 450 - total flux cleaned = -0.000437773 Jy ! Component: 500 - total flux cleaned = -0.000526705 Jy ! Component: 550 - total flux cleaned = -0.000635602 Jy ! Component: 600 - total flux cleaned = -0.00080734 Jy ! Component: 650 - total flux cleaned = -0.000996531 Jy ! Component: 700 - total flux cleaned = -0.00112043 Jy ! Component: 750 - total flux cleaned = -0.00132293 Jy ! Component: 800 - total flux cleaned = -0.0014626 Jy ! Component: 850 - total flux cleaned = -0.00167885 Jy ! Component: 900 - total flux cleaned = -0.00187206 Jy ! Component: 950 - total flux cleaned = -0.00202393 Jy ! Component: 1000 - total flux cleaned = -0.0021552 Jy ! Component: 1050 - total flux cleaned = -0.00226644 Jy ! Component: 1100 - total flux cleaned = -0.00243072 Jy ! Component: 1150 - total flux cleaned = -0.00257473 Jy ! Component: 1200 - total flux cleaned = -0.00266357 Jy ! Component: 1250 - total flux cleaned = -0.00275156 Jy ! Component: 1300 - total flux cleaned = -0.0029076 Jy ! Component: 1350 - total flux cleaned = -0.00297606 Jy ! Component: 1400 - total flux cleaned = -0.0030098 Jy ! Component: 1450 - total flux cleaned = -0.00302661 Jy ! Component: 1500 - total flux cleaned = -0.00305978 Jy ! Component: 1550 - total flux cleaned = -0.00312534 Jy ! Component: 1600 - total flux cleaned = -0.00315739 Jy ! Component: 1650 - total flux cleaned = -0.00322135 Jy ! Component: 1700 - total flux cleaned = -0.00325298 Jy ! Component: 1750 - total flux cleaned = -0.00336235 Jy ! Component: 1800 - total flux cleaned = -0.00339304 Jy ! Component: 1850 - total flux cleaned = -0.00337774 Jy ! Component: 1900 - total flux cleaned = -0.00340806 Jy ! Component: 1950 - total flux cleaned = -0.0033933 Jy ! Component: 2000 - total flux cleaned = -0.00345292 Jy ! Component: 2050 - total flux cleaned = -0.00351182 Jy ! Component: 2100 - total flux cleaned = -0.00349711 Jy ! Component: 2150 - total flux cleaned = -0.00354039 Jy ! Component: 2200 - total flux cleaned = -0.00359778 Jy ! Component: 2250 - total flux cleaned = -0.00358386 Jy ! Component: 2300 - total flux cleaned = -0.003668 Jy ! Component: 2350 - total flux cleaned = -0.00372357 Jy ! Component: 2400 - total flux cleaned = -0.00373749 Jy ! Component: 2450 - total flux cleaned = -0.00375114 Jy ! Component: 2500 - total flux cleaned = -0.00376472 Jy ! Component: 2550 - total flux cleaned = -0.00376473 Jy ! Component: 2600 - total flux cleaned = -0.00379155 Jy ! Component: 2650 - total flux cleaned = -0.00383122 Jy ! Component: 2700 - total flux cleaned = -0.00385745 Jy ! Component: 2750 - total flux cleaned = -0.00393541 Jy ! Component: 2800 - total flux cleaned = -0.00392249 Jy ! Component: 2850 - total flux cleaned = -0.00389687 Jy ! Component: 2900 - total flux cleaned = -0.00394762 Jy ! Component: 2950 - total flux cleaned = -0.00397269 Jy ! Component: 3000 - total flux cleaned = -0.00399774 Jy ! Component: 3050 - total flux cleaned = -0.00398539 Jy ! Component: 3100 - total flux cleaned = -0.00408364 Jy ! Component: 3150 - total flux cleaned = -0.00404713 Jy ! Component: 3200 - total flux cleaned = -0.00408323 Jy ! Component: 3250 - total flux cleaned = -0.00409518 Jy ! Component: 3300 - total flux cleaned = -0.00413097 Jy ! Component: 3350 - total flux cleaned = -0.00414292 Jy ! Component: 3400 - total flux cleaned = -0.00418986 Jy ! Component: 3450 - total flux cleaned = -0.00422478 Jy ! Component: 3500 - total flux cleaned = -0.00421317 Jy ! Component: 3550 - total flux cleaned = -0.00427068 Jy ! Component: 3600 - total flux cleaned = -0.00429338 Jy ! Component: 3650 - total flux cleaned = -0.00429341 Jy ! Component: 3700 - total flux cleaned = -0.00431582 Jy ! Component: 3750 - total flux cleaned = -0.00430464 Jy ! Component: 3800 - total flux cleaned = -0.00437124 Jy ! Component: 3850 - total flux cleaned = -0.00436003 Jy ! Component: 3900 - total flux cleaned = -0.00431619 Jy ! Component: 3950 - total flux cleaned = -0.00432704 Jy ! Component: 4000 - total flux cleaned = -0.00431626 Jy ! Component: 4050 - total flux cleaned = -0.00431629 Jy ! Total flux subtracted in 4096 components = -0.00433762 Jy ! Clean residual min=-0.000713 max=0.000635 Jy/beam ! Clean residual mean=-0.000001 rms=0.000193 Jy/beam ! Combined flux in latest and established models = 0.076057 Jy keep ! Adding 294 model components to the UV plane model. ! The established model now contains 414 components and 0.0760571 Jy ![Exited script file: muppet] wmap "J2146-2326_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.92 x 7.278 at -4.952 degrees (North through East) ! Clean map min=-0.001349 max=0.057082 Jy/beam ! Writing clean map to FITS file: J2146-2326_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0570821 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000190992 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.00377 1.00377 2.00755 4.0151 8.03019 16.0604 32.1208 64.2415 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.057 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.92 x 7.278 at -4.952 degrees (North through East) ! Clean map min=-0.001349 max=0.057082 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2146-2326_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:35:26 2017