! Started logfile: J2143-2549_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:35:16 2017 obs J2143-2549_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J2143-2549_S_2015_01_23_pus_uva.fits ! AN table 1: 123 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.875158 visibilities/baseline/integration-bin. ! Found source: J2143-2549 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 19376 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2143-2549_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.969723Jy sigma=0.008046 ! Fit after self-cal, rms=0.927740Jy sigma=0.007818 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.443 mas, bmaj=6.342 mas, bpa=-5.236 degrees ! Estimated noise=1183.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0619756 Jy ! Component: 100 - total flux cleaned = 0.0756215 Jy ! Total flux subtracted in 100 components = 0.0756215 Jy ! Clean residual min=-0.004651 max=0.004612 Jy/beam ! Clean residual mean=-0.000004 rms=0.001042 Jy/beam ! Combined flux in latest and established models = 0.0756215 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0756215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153319Jy sigma=0.000785 ! Fit after self-cal, rms=0.153231Jy sigma=0.000784 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.925 mas, bmaj=7.397 mas, bpa=-5.616 degrees ! Estimated noise=631.441 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.5, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00658847 Jy ! Component: 100 - total flux cleaned = 0.0104616 Jy ! Component: 150 - total flux cleaned = 0.0130552 Jy ! Component: 200 - total flux cleaned = 0.0149155 Jy ! Total flux subtracted in 200 components = 0.0149155 Jy ! Clean residual min=-0.003183 max=0.004078 Jy/beam ! Clean residual mean=-0.000014 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.090537 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 40 components and 0.090537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152726Jy sigma=0.000781 ! Fit after self-cal, rms=0.152738Jy sigma=0.000781 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.61 HN 1.01 KP 1.11 ! LA 1.00 MK 0.99 NL 1.17 OV 0.98 ! PT 1.01 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.72 HN 1.06 KP 1.07 ! LA 0.90 MK 1.02 NL 1.29 OV 0.98 ! PT 0.96 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.72 HN 1.07 KP 0.88 ! LA 0.81 MK 1.08 NL 1.11 OV 0.91 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.69 HN 1.02 KP 0.82 ! LA 0.87 MK 1.02 NL 1.00 OV 0.97 ! PT 1.02 SC 1.00 ! ! ! Fit before self-cal, rms=0.152738Jy sigma=0.000781 ! Fit after self-cal, rms=0.121893Jy sigma=0.000775 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.963 mas, bmaj=7.479 mas, bpa=-5.271 degrees ! Estimated noise=630.238 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00128734 Jy ! Component: 100 - total flux cleaned = -0.00155252 Jy ! Component: 150 - total flux cleaned = -0.00167848 Jy ! Component: 200 - total flux cleaned = -0.00175777 Jy ! Total flux subtracted in 200 components = -0.00175777 Jy ! Clean residual min=-0.002081 max=0.002174 Jy/beam ! Clean residual mean=-0.000009 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.0887792 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 51 components and 0.0887792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121869Jy sigma=0.000775 ! Fit after self-cal, rms=0.121706Jy sigma=0.000775 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121706Jy sigma=0.000775 ! Fit after self-cal, rms=0.121344Jy sigma=0.000774 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.974 mas, bmaj=7.483 mas, bpa=-5.45 degrees ! Estimated noise=629.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000754655 Jy ! Component: 100 - total flux cleaned = -0.000880353 Jy ! Component: 150 - total flux cleaned = -0.000900637 Jy ! Component: 200 - total flux cleaned = -0.000936536 Jy ! Total flux subtracted in 200 components = -0.000936536 Jy ! Clean residual min=-0.001838 max=0.001723 Jy/beam ! Clean residual mean=-0.000005 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.0878427 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 67 components and 0.0878427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121334Jy sigma=0.000774 ! Fit after self-cal, rms=0.121353Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000128734 Jy ! Component: 100 - total flux cleaned = -0.000111633 Jy ! Component: 150 - total flux cleaned = -0.000111836 Jy ! Component: 200 - total flux cleaned = -0.000111689 Jy ! Total flux subtracted in 200 components = -0.000111689 Jy ! Clean residual min=-0.001848 max=0.001793 Jy/beam ! Clean residual mean=-0.000006 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.087731 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 75 components and 0.087731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121349Jy sigma=0.000774 ! Fit after self-cal, rms=0.121346Jy sigma=0.000774 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121346Jy sigma=0.000774 ! Fit after self-cal, rms=0.121702Jy sigma=0.000773 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.979 mas, bmaj=7.491 mas, bpa=-5.473 degrees ! Estimated noise=629.763 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000452468 Jy ! Component: 100 - total flux cleaned = -0.000575896 Jy ! Component: 150 - total flux cleaned = -0.000636808 Jy ! Component: 200 - total flux cleaned = -0.00067847 Jy ! Total flux subtracted in 200 components = -0.00067847 Jy ! Clean residual min=-0.001832 max=0.001723 Jy/beam ! Clean residual mean=-0.000004 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.0870525 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 84 components and 0.0870526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121697Jy sigma=0.000773 ! Fit after self-cal, rms=0.121716Jy sigma=0.000773 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000101231 Jy ! Component: 100 - total flux cleaned = -0.00011382 Jy ! Component: 150 - total flux cleaned = -0.000138834 Jy ! Component: 200 - total flux cleaned = -0.000162694 Jy ! Total flux subtracted in 200 components = -0.000162694 Jy ! Clean residual min=-0.001828 max=0.001741 Jy/beam ! Clean residual mean=-0.000005 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.0868899 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 88 components and 0.0868899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121713Jy sigma=0.000773 ! Fit after self-cal, rms=0.121713Jy sigma=0.000773 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121713Jy sigma=0.000773 ! Fit after self-cal, rms=0.121910Jy sigma=0.000773 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.453 mas, bmaj=17.21 mas, bpa=-1.157 degrees ! Estimated noise=816.803 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000516475 Jy ! Component: 100 - total flux cleaned = -0.00059247 Jy ! Component: 150 - total flux cleaned = -0.000624866 Jy ! Component: 200 - total flux cleaned = -0.000654364 Jy ! Total flux subtracted in 200 components = -0.000654364 Jy ! Clean residual min=-0.001765 max=0.001715 Jy/beam ! Clean residual mean=-0.000011 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.0862355 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 99 components and 0.0862355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121909Jy sigma=0.000773 ! Fit after self-cal, rms=0.121916Jy sigma=0.000773 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.62698e-05 Jy ! Component: 100 - total flux cleaned = -0.000120078 Jy ! Component: 150 - total flux cleaned = -0.000138483 Jy ! Component: 200 - total flux cleaned = -0.000155033 Jy ! Total flux subtracted in 200 components = -0.000155033 Jy ! Clean residual min=-0.001760 max=0.001724 Jy/beam ! Clean residual mean=-0.000011 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.0860805 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 103 components and 0.0860805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121915Jy sigma=0.000773 ! Fit after self-cal, rms=0.121914Jy sigma=0.000773 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.983 mas, bmaj=7.5 mas, bpa=-5.491 degrees ! Estimated noise=629.644 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.983 x 7.5 at -5.491 degrees (North through East) ! Clean map min=-0.0017335 max=0.079183 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.473 mas, bmaj=6.359 mas, bpa=-5.078 degrees ! Estimated noise=1192.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0623105 Jy ! Component: 100 - total flux cleaned = 0.0760612 Jy ! Component: 150 - total flux cleaned = 0.08048 Jy ! Component: 200 - total flux cleaned = 0.0828801 Jy ! Total flux subtracted in 200 components = 0.0828801 Jy ! Clean residual min=-0.003590 max=0.003283 Jy/beam ! Clean residual mean=0.000000 rms=0.000893 Jy/beam ! Combined flux in latest and established models = 0.08288 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.08288 Jy ! Inverting map and beam ! Estimated beam: bmin=2.983 mas, bmaj=7.5 mas, bpa=-5.491 degrees ! Estimated noise=629.644 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00242126 Jy ! Component: 100 - total flux cleaned = 0.00304708 Jy ! Component: 150 - total flux cleaned = 0.00313885 Jy ! Component: 200 - total flux cleaned = 0.00314082 Jy ! Total flux subtracted in 200 components = 0.00314082 Jy ! Clean residual min=-0.001888 max=0.001842 Jy/beam ! Clean residual mean=-0.000004 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.0860208 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 33 components and 0.0860208 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.453 mas, bmaj=17.21 mas, bpa=-1.157 degrees ! Estimated noise=816.803 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000226244 Jy ! Component: 100 - total flux cleaned = 0.000214752 Jy ! Component: 150 - total flux cleaned = 0.000194273 Jy ! Component: 200 - total flux cleaned = 0.000155151 Jy ! Total flux subtracted in 200 components = 0.000155151 Jy ! Clean residual min=-0.001775 max=0.001702 Jy/beam ! Clean residual mean=-0.000011 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.086176 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.59907e-05 Jy ! Component: 100 - total flux cleaned = -6.98255e-05 Jy ! Component: 150 - total flux cleaned = -0.000101418 Jy ! Component: 200 - total flux cleaned = -0.000131725 Jy ! Total flux subtracted in 200 components = -0.000131725 Jy ! Clean residual min=-0.001773 max=0.001717 Jy/beam ! Clean residual mean=-0.000011 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.0860443 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 49 components and 0.0860443 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.983 mas, bmaj=7.5 mas, bpa=-5.491 degrees ! Estimated noise=629.644 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.21629e-06 Jy ! Component: 100 - total flux cleaned = -1.92969e-05 Jy ! Component: 150 - total flux cleaned = -4.13634e-05 Jy ! Component: 200 - total flux cleaned = -8.25005e-05 Jy ! Total flux subtracted in 200 components = -8.25005e-05 Jy ! Clean residual min=-0.001748 max=0.001769 Jy/beam ! Clean residual mean=-0.000005 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.0859618 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 65 components and 0.0859618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121930Jy sigma=0.000773 ! Fit after self-cal, rms=0.121917Jy sigma=0.000773 wmodel J2143-2549_S_2015_01_23_pus_map.mod ! Writing 65 model components to file: J2143-2549_S_2015_01_23_pus_map.mod wobs J2143-2549_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J2143-2549_S_2015_01_23_pus_uvs.fits wwins J2143-2549_S_2015_01_23_pus_map.win ! wwins: Wrote 2 windows to J2143-2549_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00022643 Jy ! Component: 100 - total flux cleaned = -0.000317141 Jy ! Component: 150 - total flux cleaned = -0.000462275 Jy ! Component: 200 - total flux cleaned = -0.00068636 Jy ! Component: 250 - total flux cleaned = -0.000822215 Jy ! Component: 300 - total flux cleaned = -0.00100792 Jy ! Component: 350 - total flux cleaned = -0.00113686 Jy ! Component: 400 - total flux cleaned = -0.00126295 Jy ! Component: 450 - total flux cleaned = -0.00136188 Jy ! Component: 500 - total flux cleaned = -0.00141082 Jy ! Component: 550 - total flux cleaned = -0.00150532 Jy ! Component: 600 - total flux cleaned = -0.00148208 Jy ! Component: 650 - total flux cleaned = -0.00155115 Jy ! Component: 700 - total flux cleaned = -0.00168617 Jy ! Component: 750 - total flux cleaned = -0.00170798 Jy ! Component: 800 - total flux cleaned = -0.00172988 Jy ! Component: 850 - total flux cleaned = -0.00181616 Jy ! Component: 900 - total flux cleaned = -0.00190127 Jy ! Component: 950 - total flux cleaned = -0.00196396 Jy ! Component: 1000 - total flux cleaned = -0.00202593 Jy ! Component: 1050 - total flux cleaned = -0.00212814 Jy ! Component: 1100 - total flux cleaned = -0.00214848 Jy ! Component: 1150 - total flux cleaned = -0.00212883 Jy ! Component: 1200 - total flux cleaned = -0.00222792 Jy ! Component: 1250 - total flux cleaned = -0.00228651 Jy ! Component: 1300 - total flux cleaned = -0.0023634 Jy ! Component: 1350 - total flux cleaned = -0.00242045 Jy ! Component: 1400 - total flux cleaned = -0.00245778 Jy ! Component: 1450 - total flux cleaned = -0.00243909 Jy ! Component: 1500 - total flux cleaned = -0.0025128 Jy ! Component: 1550 - total flux cleaned = -0.0025493 Jy ! Component: 1600 - total flux cleaned = -0.00256763 Jy ! Component: 1650 - total flux cleaned = -0.00269259 Jy ! Component: 1700 - total flux cleaned = -0.00276311 Jy ! Component: 1750 - total flux cleaned = -0.00283299 Jy ! Component: 1800 - total flux cleaned = -0.00288486 Jy ! Component: 1850 - total flux cleaned = -0.00297047 Jy ! Component: 1900 - total flux cleaned = -0.00298741 Jy ! Component: 1950 - total flux cleaned = -0.00308813 Jy ! Component: 2000 - total flux cleaned = -0.00310474 Jy ! Component: 2050 - total flux cleaned = -0.00317094 Jy ! Component: 2100 - total flux cleaned = -0.00323643 Jy ! Component: 2150 - total flux cleaned = -0.00330113 Jy ! Component: 2200 - total flux cleaned = -0.00328516 Jy ! Component: 2250 - total flux cleaned = -0.00339714 Jy ! Component: 2300 - total flux cleaned = -0.0033972 Jy ! Component: 2350 - total flux cleaned = -0.00349149 Jy ! Component: 2400 - total flux cleaned = -0.00350695 Jy ! Component: 2450 - total flux cleaned = -0.00352256 Jy ! Component: 2500 - total flux cleaned = -0.00359925 Jy ! Component: 2550 - total flux cleaned = -0.00366008 Jy ! Component: 2600 - total flux cleaned = -0.00375086 Jy ! Component: 2650 - total flux cleaned = -0.00376578 Jy ! Component: 2700 - total flux cleaned = -0.00384027 Jy ! Component: 2750 - total flux cleaned = -0.00388475 Jy ! Component: 2800 - total flux cleaned = -0.00395812 Jy ! Component: 2850 - total flux cleaned = -0.00391424 Jy ! Component: 2900 - total flux cleaned = -0.00398685 Jy ! Component: 2950 - total flux cleaned = -0.00400129 Jy ! Component: 3000 - total flux cleaned = -0.0040872 Jy ! Component: 3050 - total flux cleaned = -0.00407296 Jy ! Component: 3100 - total flux cleaned = -0.00410135 Jy ! Component: 3150 - total flux cleaned = -0.00417173 Jy ! Component: 3200 - total flux cleaned = -0.00418575 Jy ! Component: 3250 - total flux cleaned = -0.00422724 Jy ! Component: 3300 - total flux cleaned = -0.00425481 Jy ! Component: 3350 - total flux cleaned = -0.00426848 Jy ! Component: 3400 - total flux cleaned = -0.00433654 Jy ! Component: 3450 - total flux cleaned = -0.00430945 Jy ! Component: 3500 - total flux cleaned = -0.00436337 Jy ! Component: 3550 - total flux cleaned = -0.00441693 Jy ! Component: 3600 - total flux cleaned = -0.00443026 Jy ! Component: 3650 - total flux cleaned = -0.00448331 Jy ! Component: 3700 - total flux cleaned = -0.00449647 Jy ! Component: 3750 - total flux cleaned = -0.00453592 Jy ! Component: 3800 - total flux cleaned = -0.00457486 Jy ! Component: 3850 - total flux cleaned = -0.00456185 Jy ! Component: 3900 - total flux cleaned = -0.00458766 Jy ! Component: 3950 - total flux cleaned = -0.00466456 Jy ! Component: 4000 - total flux cleaned = -0.00460082 Jy ! Component: 4050 - total flux cleaned = -0.00470226 Jy ! Total flux subtracted in 4096 components = -0.0046896 Jy ! Clean residual min=-0.000774 max=0.000752 Jy/beam ! Clean residual mean=-0.000003 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.0812722 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 357 components and 0.0812722 Jy ![Exited script file: muppet] wmap "J2143-2549_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.983 x 7.5 at -5.491 degrees (North through East) ! Clean map min=-0.0013371 max=0.079225 Jy/beam ! Writing clean map to FITS file: J2143-2549_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0792248 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000228539 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.865408 0.865408 1.73082 3.46163 6.92326 13.8465 27.6931 55.3861 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.079 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.983 x 7.5 at -5.491 degrees (North through East) ! Clean map min=-0.0013371 max=0.079225 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2143-2549_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:35:21 2017