! Started logfile: J2134-4218_S_2015_03_17_pus_uvs.log on Fri Dec 30 23:09:18 2016 obs J2134-4218_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J2134-4218_S_2015_03_17_pus_uva.fits ! AN table 1: 120 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.532778 visibilities/baseline/integration-bin. ! Found source: J2134-4218 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 11508 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2134-4218_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 370 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 310 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 310 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 310 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.901266Jy sigma=0.006011 ! Fit after self-cal, rms=0.795741Jy sigma=0.005230 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.251 mas, bmaj=8.497 mas, bpa=-17.45 degrees ! Estimated noise=1940.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.149787 Jy ! Component: 100 - total flux cleaned = 0.202671 Jy ! Total flux subtracted in 100 components = 0.202671 Jy ! Clean residual min=-0.019280 max=0.043348 Jy/beam ! Clean residual mean=-0.000229 rms=0.006271 Jy/beam ! Combined flux in latest and established models = 0.202671 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.202671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179799Jy sigma=0.001104 ! Fit after self-cal, rms=0.179285Jy sigma=0.001103 ! Inverting map ! Added new window around map position (-4, -20). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.042958 Jy ! Component: 100 - total flux cleaned = 0.0722158 Jy ! Total flux subtracted in 100 components = 0.0722158 Jy ! Clean residual min=-0.015683 max=0.032353 Jy/beam ! Clean residual mean=-0.000145 rms=0.004582 Jy/beam ! Combined flux in latest and established models = 0.274887 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 34 components and 0.274887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159198Jy sigma=0.000943 ! Fit after self-cal, rms=0.157625Jy sigma=0.000935 ! Inverting map ! Added new window around map position (-5.5, -1.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0273817 Jy ! Component: 100 - total flux cleaned = 0.0458827 Jy ! Total flux subtracted in 100 components = 0.0458827 Jy ! Clean residual min=-0.013385 max=0.025745 Jy/beam ! Clean residual mean=-0.000095 rms=0.003637 Jy/beam ! Combined flux in latest and established models = 0.32077 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 47 components and 0.32077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147679Jy sigma=0.000860 ! Fit after self-cal, rms=0.146929Jy sigma=0.000856 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.826 mas, bmaj=10.28 mas, bpa=-17 degrees ! Estimated noise=1027.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0316925 Jy ! Component: 100 - total flux cleaned = 0.0507258 Jy ! Component: 150 - total flux cleaned = 0.0631934 Jy ! Component: 200 - total flux cleaned = 0.0714373 Jy ! Total flux subtracted in 200 components = 0.0714373 Jy ! Clean residual min=-0.011749 max=0.022162 Jy/beam ! Clean residual mean=-0.000062 rms=0.003529 Jy/beam ! Combined flux in latest and established models = 0.392207 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 78 components and 0.392207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139026Jy sigma=0.000802 ! Fit after self-cal, rms=0.138307Jy sigma=0.000798 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 1.53 KP 1.06 ! LA 1.00 MK 1.00 NL 1.20 OV 1.03 ! PT 1.04 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 HN 1.54 KP 1.04 ! LA 0.96 MK 1.05 NL 1.31 OV 1.05 ! PT 1.04 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.85 KP 0.94 ! LA 0.76 MK 1.06 NL 1.46 OV 0.98 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.71 KP 0.91 ! LA 0.84 MK 1.06 NL 1.24 OV 1.05 ! PT 1.07 SC 0.95 ! ! ! Fit before self-cal, rms=0.138307Jy sigma=0.000798 ! Fit after self-cal, rms=0.167669Jy sigma=0.000756 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.878 mas, bmaj=10.21 mas, bpa=-16.89 degrees ! Estimated noise=1093.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000816469 Jy ! Component: 100 - total flux cleaned = -0.00124234 Jy ! Component: 150 - total flux cleaned = -0.00174187 Jy ! Component: 200 - total flux cleaned = -0.00207441 Jy ! Total flux subtracted in 200 components = -0.00207441 Jy ! Clean residual min=-0.005742 max=0.005683 Jy/beam ! Clean residual mean=0.000019 rms=0.001398 Jy/beam ! Combined flux in latest and established models = 0.390133 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 104 components and 0.390133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167382Jy sigma=0.000754 ! Fit after self-cal, rms=0.168483Jy sigma=0.000753 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168483Jy sigma=0.000753 ! Fit after self-cal, rms=0.169050Jy sigma=0.000753 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.88 mas, bmaj=10.16 mas, bpa=-16.72 degrees ! Estimated noise=1093.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000473011 Jy ! Component: 100 - total flux cleaned = -0.000837494 Jy ! Component: 150 - total flux cleaned = -0.00116299 Jy ! Component: 200 - total flux cleaned = -0.00136169 Jy ! Total flux subtracted in 200 components = -0.00136169 Jy ! Clean residual min=-0.005928 max=0.005937 Jy/beam ! Clean residual mean=0.000016 rms=0.001338 Jy/beam ! Combined flux in latest and established models = 0.388771 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 115 components and 0.388771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168843Jy sigma=0.000753 ! Fit after self-cal, rms=0.168921Jy sigma=0.000752 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (19.5, 93). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00514488 Jy ! Component: 100 - total flux cleaned = 0.00479649 Jy ! Component: 150 - total flux cleaned = 0.00480042 Jy ! Component: 200 - total flux cleaned = 0.0046186 Jy ! Total flux subtracted in 200 components = 0.0046186 Jy ! Clean residual min=-0.005264 max=0.005032 Jy/beam ! Clean residual mean=0.000016 rms=0.001189 Jy/beam ! Combined flux in latest and established models = 0.39339 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 140 components and 0.39339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168673Jy sigma=0.000751 ! Fit after self-cal, rms=0.168707Jy sigma=0.000751 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168707Jy sigma=0.000751 ! Fit after self-cal, rms=0.168605Jy sigma=0.000749 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.886 mas, bmaj=10.06 mas, bpa=-16.5 degrees ! Estimated noise=1088.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144296 Jy ! Component: 100 - total flux cleaned = 0.0011974 Jy ! Component: 150 - total flux cleaned = 0.0011962 Jy ! Component: 200 - total flux cleaned = 0.00112535 Jy ! Total flux subtracted in 200 components = 0.00112535 Jy ! Clean residual min=-0.004116 max=0.004098 Jy/beam ! Clean residual mean=0.000011 rms=0.000996 Jy/beam ! Combined flux in latest and established models = 0.394515 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 154 components and 0.394515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168498Jy sigma=0.000749 ! Fit after self-cal, rms=0.168333Jy sigma=0.000749 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000382149 Jy ! Component: 100 - total flux cleaned = 0.000312094 Jy ! Component: 150 - total flux cleaned = 0.000184026 Jy ! Component: 200 - total flux cleaned = 6.18549e-05 Jy ! Total flux subtracted in 200 components = 6.18549e-05 Jy ! Clean residual min=-0.004083 max=0.003914 Jy/beam ! Clean residual mean=0.000011 rms=0.000960 Jy/beam ! Combined flux in latest and established models = 0.394577 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 160 components and 0.394577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168274Jy sigma=0.000748 ! Fit after self-cal, rms=0.168255Jy sigma=0.000748 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168255Jy sigma=0.000748 ! Fit after self-cal, rms=0.167903Jy sigma=0.000748 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.652 mas, bmaj=29.63 mas, bpa=-4.702 degrees ! Estimated noise=1392.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000102228 Jy ! Component: 100 - total flux cleaned = -0.000275403 Jy ! Component: 150 - total flux cleaned = -0.000314814 Jy ! Component: 200 - total flux cleaned = -0.000350857 Jy ! Total flux subtracted in 200 components = -0.000350857 Jy ! Clean residual min=-0.003319 max=0.003106 Jy/beam ! Clean residual mean=0.000017 rms=0.000932 Jy/beam ! Combined flux in latest and established models = 0.394226 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 172 components and 0.394226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167870Jy sigma=0.000748 ! Fit after self-cal, rms=0.167879Jy sigma=0.000748 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.5154e-06 Jy ! Component: 100 - total flux cleaned = -0.000158953 Jy ! Component: 150 - total flux cleaned = -0.000195354 Jy ! Component: 200 - total flux cleaned = -0.000231894 Jy ! Total flux subtracted in 200 components = -0.000231894 Jy ! Clean residual min=-0.003242 max=0.003117 Jy/beam ! Clean residual mean=0.000017 rms=0.000927 Jy/beam ! Combined flux in latest and established models = 0.393994 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 178 components and 0.393994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167849Jy sigma=0.000748 ! Fit after self-cal, rms=0.167856Jy sigma=0.000748 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.889 mas, bmaj=10.04 mas, bpa=-16.37 degrees ! Estimated noise=1087.95 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.889 x 10.04 at -16.37 degrees (North through East) ! Clean map min=-0.0045279 max=0.16095 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.269 mas, bmaj=8.124 mas, bpa=-16.62 degrees ! Estimated noise=2086.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.161529 Jy ! Component: 100 - total flux cleaned = 0.223043 Jy ! Component: 150 - total flux cleaned = 0.260893 Jy ! Component: 200 - total flux cleaned = 0.288815 Jy ! Total flux subtracted in 200 components = 0.288815 Jy ! Clean residual min=-0.011118 max=0.019477 Jy/beam ! Clean residual mean=-0.000133 rms=0.003230 Jy/beam ! Combined flux in latest and established models = 0.288815 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.288815 Jy ! Inverting map and beam ! Estimated beam: bmin=2.889 mas, bmaj=10.04 mas, bpa=-16.37 degrees ! Estimated noise=1087.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0402879 Jy ! Component: 100 - total flux cleaned = 0.0629971 Jy ! Component: 150 - total flux cleaned = 0.076895 Jy ! Component: 200 - total flux cleaned = 0.0856933 Jy ! Total flux subtracted in 200 components = 0.0856933 Jy ! Clean residual min=-0.004470 max=0.006006 Jy/beam ! Clean residual mean=-0.000058 rms=0.001277 Jy/beam ! Combined flux in latest and established models = 0.374509 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 82 components and 0.374509 Jy ! Inverting map ! Added new window around map position (3, -31). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00660789 Jy ! Component: 100 - total flux cleaned = 0.0112785 Jy ! Component: 150 - total flux cleaned = 0.0148412 Jy ! Component: 200 - total flux cleaned = 0.0176161 Jy ! Total flux subtracted in 200 components = 0.0176161 Jy ! Clean residual min=-0.003404 max=0.002836 Jy/beam ! Clean residual mean=-0.000003 rms=0.000812 Jy/beam ! Combined flux in latest and established models = 0.392125 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 121 components and 0.392125 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.652 mas, bmaj=29.63 mas, bpa=-4.702 degrees ! Estimated noise=1392.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00243288 Jy ! Component: 100 - total flux cleaned = 0.00335587 Jy ! Component: 150 - total flux cleaned = 0.00372369 Jy ! Component: 200 - total flux cleaned = 0.00384238 Jy ! Total flux subtracted in 200 components = 0.00384238 Jy ! Clean residual min=-0.003470 max=0.002445 Jy/beam ! Clean residual mean=0.000026 rms=0.000887 Jy/beam ! Combined flux in latest and established models = 0.395967 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.50317e-05 Jy ! Component: 100 - total flux cleaned = 0.000108966 Jy ! Component: 150 - total flux cleaned = 0.00010854 Jy ! Component: 200 - total flux cleaned = 0.00010781 Jy ! Total flux subtracted in 200 components = 0.00010781 Jy ! Clean residual min=-0.003434 max=0.002426 Jy/beam ! Clean residual mean=0.000029 rms=0.000871 Jy/beam ! Combined flux in latest and established models = 0.396075 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 156 components and 0.396075 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.889 mas, bmaj=10.04 mas, bpa=-16.37 degrees ! Estimated noise=1087.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.9137e-05 Jy ! Component: 100 - total flux cleaned = 0.000101587 Jy ! Component: 150 - total flux cleaned = 0.000101847 Jy ! Component: 200 - total flux cleaned = 0.000211119 Jy ! Total flux subtracted in 200 components = 0.000211119 Jy ! Clean residual min=-0.003376 max=0.002540 Jy/beam ! Clean residual mean=0.000015 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.396286 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 172 components and 0.396286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167615Jy sigma=0.000746 ! Fit after self-cal, rms=0.167850Jy sigma=0.000746 wmodel J2134-4218_S_2015_03_17_pus_map.mod ! Writing 172 model components to file: J2134-4218_S_2015_03_17_pus_map.mod wobs J2134-4218_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J2134-4218_S_2015_03_17_pus_uvs.fits wwins J2134-4218_S_2015_03_17_pus_map.win ! wwins: Wrote 6 windows to J2134-4218_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00114691 Jy ! Component: 100 - total flux cleaned = -0.00133655 Jy ! Component: 150 - total flux cleaned = -0.00147267 Jy ! Component: 200 - total flux cleaned = -0.00168719 Jy ! Component: 250 - total flux cleaned = -0.00172767 Jy ! Component: 300 - total flux cleaned = -0.00180716 Jy ! Component: 350 - total flux cleaned = -0.0020362 Jy ! Component: 400 - total flux cleaned = -0.00214674 Jy ! Component: 450 - total flux cleaned = -0.00214725 Jy ! Component: 500 - total flux cleaned = -0.00221733 Jy ! Component: 550 - total flux cleaned = -0.00214927 Jy ! Component: 600 - total flux cleaned = -0.00214906 Jy ! Component: 650 - total flux cleaned = -0.00201812 Jy ! Component: 700 - total flux cleaned = -0.00198631 Jy ! Component: 750 - total flux cleaned = -0.00192283 Jy ! Component: 800 - total flux cleaned = -0.00173832 Jy ! Component: 850 - total flux cleaned = -0.00164793 Jy ! Component: 900 - total flux cleaned = -0.00149937 Jy ! Component: 950 - total flux cleaned = -0.00135387 Jy ! Component: 1000 - total flux cleaned = -0.0012102 Jy ! Component: 1050 - total flux cleaned = -0.00109695 Jy ! Component: 1100 - total flux cleaned = -0.000984889 Jy ! Component: 1150 - total flux cleaned = -0.000792561 Jy ! Component: 1200 - total flux cleaned = -0.000630318 Jy ! Component: 1250 - total flux cleaned = -0.000470004 Jy ! Component: 1300 - total flux cleaned = -0.000364539 Jy ! Component: 1350 - total flux cleaned = -0.000208072 Jy ! Component: 1400 - total flux cleaned = -7.95753e-05 Jy ! Component: 1450 - total flux cleaned = 9.82452e-05 Jy ! Component: 1500 - total flux cleaned = 0.000273482 Jy ! Component: 1550 - total flux cleaned = 0.000372709 Jy ! Component: 1600 - total flux cleaned = 0.000519945 Jy ! Component: 1650 - total flux cleaned = 0.000689864 Jy ! Component: 1700 - total flux cleaned = 0.00083367 Jy ! Component: 1750 - total flux cleaned = 0.00102286 Jy ! Component: 1800 - total flux cleaned = 0.00111635 Jy ! Component: 1850 - total flux cleaned = 0.00127861 Jy ! Component: 1900 - total flux cleaned = 0.00148477 Jy ! Component: 1950 - total flux cleaned = 0.00157573 Jy ! Component: 2000 - total flux cleaned = 0.0018226 Jy ! Component: 2050 - total flux cleaned = 0.00193375 Jy ! Component: 2100 - total flux cleaned = 0.00210992 Jy ! Component: 2150 - total flux cleaned = 0.00224071 Jy ! Component: 2200 - total flux cleaned = 0.00249919 Jy ! Component: 2250 - total flux cleaned = 0.0026695 Jy ! Component: 2300 - total flux cleaned = 0.00277501 Jy ! Component: 2350 - total flux cleaned = 0.00294218 Jy ! Component: 2400 - total flux cleaned = 0.00306649 Jy ! Component: 2450 - total flux cleaned = 0.003292 Jy ! Component: 2500 - total flux cleaned = 0.00331208 Jy ! Component: 2550 - total flux cleaned = 0.00343288 Jy ! Component: 2600 - total flux cleaned = 0.00357245 Jy ! Component: 2650 - total flux cleaned = 0.00363172 Jy ! Component: 2700 - total flux cleaned = 0.00374937 Jy ! Component: 2750 - total flux cleaned = 0.00390473 Jy ! Component: 2800 - total flux cleaned = 0.00398168 Jy ! Component: 2850 - total flux cleaned = 0.00407699 Jy ! Component: 2900 - total flux cleaned = 0.00417157 Jy ! Component: 2950 - total flux cleaned = 0.00430301 Jy ! Component: 3000 - total flux cleaned = 0.00445157 Jy ! Component: 3050 - total flux cleaned = 0.00447003 Jy ! Component: 3100 - total flux cleaned = 0.00456192 Jy ! Component: 3150 - total flux cleaned = 0.00470715 Jy ! Component: 3200 - total flux cleaned = 0.00479722 Jy ! Component: 3250 - total flux cleaned = 0.00492246 Jy ! Component: 3300 - total flux cleaned = 0.00504683 Jy ! Component: 3350 - total flux cleaned = 0.00511722 Jy ! Component: 3400 - total flux cleaned = 0.00522218 Jy ! Component: 3450 - total flux cleaned = 0.0053613 Jy ! Component: 3500 - total flux cleaned = 0.00548187 Jy ! Component: 3550 - total flux cleaned = 0.00561875 Jy ! Component: 3600 - total flux cleaned = 0.0056528 Jy ! Component: 3650 - total flux cleaned = 0.00582173 Jy ! Component: 3700 - total flux cleaned = 0.00590557 Jy ! Component: 3750 - total flux cleaned = 0.00605575 Jy ! Component: 3800 - total flux cleaned = 0.00610557 Jy ! Component: 3850 - total flux cleaned = 0.00627027 Jy ! Component: 3900 - total flux cleaned = 0.0063685 Jy ! Component: 3950 - total flux cleaned = 0.00648249 Jy ! Component: 4000 - total flux cleaned = 0.00657943 Jy ! Component: 4050 - total flux cleaned = 0.00667586 Jy ! Total flux subtracted in 4096 components = 0.00678755 Jy ! Clean residual min=-0.000852 max=0.000937 Jy/beam ! Clean residual mean=0.000014 rms=0.000301 Jy/beam ! Combined flux in latest and established models = 0.403074 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 457 components and 0.403074 Jy ![Exited script file: muppet] wmap "J2134-4218_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.889 x 10.04 at -16.37 degrees (North through East) ! Clean map min=-0.0020581 max=0.16885 Jy/beam ! Writing clean map to FITS file: J2134-4218_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.168852 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000295469 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.524961 0.524961 1.04992 2.09984 4.19969 8.39937 16.7987 33.5975 67.195 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.168 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.889 x 10.04 at -16.37 degrees (North through East) ! Clean map min=-0.0020581 max=0.16885 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2134-4218_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 23:09:23 2016