! Started logfile: J2129-1538_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:35:06 2017 obs J2129-1538_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J2129-1538_S_2015_01_23_pus_uva.fits ! AN table 1: 41 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.78103 visibilities/baseline/integration-bin. ! Found source: J2129-1538 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 5764 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2129-1538_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.533822Jy sigma=0.004641 ! Fit after self-cal, rms=0.414923Jy sigma=0.003369 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.34 mas, bmaj=6.244 mas, bpa=4.161 degrees ! Estimated noise=1503.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.510478 Jy ! Component: 100 - total flux cleaned = 0.625157 Jy ! Total flux subtracted in 100 components = 0.625157 Jy ! Clean residual min=-0.040348 max=0.050760 Jy/beam ! Clean residual mean=-0.000135 rms=0.008380 Jy/beam ! Combined flux in latest and established models = 0.625157 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.625157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256670Jy sigma=0.001733 ! Fit after self-cal, rms=0.256668Jy sigma=0.001733 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.117 mas, bmaj=7.627 mas, bpa=4.299 degrees ! Estimated noise=1085.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0698797 Jy ! Component: 100 - total flux cleaned = 0.101192 Jy ! Component: 150 - total flux cleaned = 0.1172 Jy ! Component: 200 - total flux cleaned = 0.126108 Jy ! Total flux subtracted in 200 components = 0.126108 Jy ! Clean residual min=-0.030090 max=0.056742 Jy/beam ! Clean residual mean=-0.000249 rms=0.009319 Jy/beam ! Combined flux in latest and established models = 0.751266 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 37 components and 0.751266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246493Jy sigma=0.001515 ! Fit after self-cal, rms=0.246499Jy sigma=0.001515 ! Inverting map ! Added new window around map position (38, -71.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0491256 Jy ! Component: 100 - total flux cleaned = 0.0670834 Jy ! Component: 150 - total flux cleaned = 0.0728359 Jy ! Component: 200 - total flux cleaned = 0.0764127 Jy ! Total flux subtracted in 200 components = 0.0764127 Jy ! Clean residual min=-0.026039 max=0.038376 Jy/beam ! Clean residual mean=-0.000114 rms=0.006734 Jy/beam ! Combined flux in latest and established models = 0.827678 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 81 components and 0.827678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232868Jy sigma=0.001381 ! Fit after self-cal, rms=0.231899Jy sigma=0.001363 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.14 HN 0.99 KP 1.09 ! LA 1.02 MK 1.01 NL 1.14 OV 0.99 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.36 HN 1.04 KP 1.01 ! LA 0.99 MK 1.00 NL 1.28 OV 1.02 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.54 HN 1.04 KP 0.88 ! LA 0.79 MK 1.02 NL 1.32 OV 0.94 ! PT 0.97 SC 1.03 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.28 HN 1.00 KP 0.79 ! LA 0.81 MK 1.03 NL 0.94 OV 0.99 ! PT 1.01 SC 0.97 ! ! ! Fit before self-cal, rms=0.231899Jy sigma=0.001363 ! Fit after self-cal, rms=0.241447Jy sigma=0.000938 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.118 mas, bmaj=7.633 mas, bpa=4.826 degrees ! Estimated noise=1109.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0156146 Jy ! Component: 100 - total flux cleaned = -0.0189115 Jy ! Component: 150 - total flux cleaned = -0.0200615 Jy ! Component: 200 - total flux cleaned = -0.0209456 Jy ! Total flux subtracted in 200 components = -0.0209456 Jy ! Clean residual min=-0.010532 max=0.010279 Jy/beam ! Clean residual mean=-0.000024 rms=0.002461 Jy/beam ! Combined flux in latest and established models = 0.806733 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 103 components and 0.806733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239794Jy sigma=0.000924 ! Fit after self-cal, rms=0.239765Jy sigma=0.000922 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239765Jy sigma=0.000922 ! Fit after self-cal, rms=0.243938Jy sigma=0.000916 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.121 mas, bmaj=7.638 mas, bpa=4.865 degrees ! Estimated noise=1111.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00763715 Jy ! Component: 100 - total flux cleaned = -0.00839589 Jy ! Component: 150 - total flux cleaned = -0.00919301 Jy ! Component: 200 - total flux cleaned = -0.00972595 Jy ! Total flux subtracted in 200 components = -0.00972595 Jy ! Clean residual min=-0.009286 max=0.009431 Jy/beam ! Clean residual mean=-0.000018 rms=0.002279 Jy/beam ! Combined flux in latest and established models = 0.797007 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 112 components and 0.797007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243324Jy sigma=0.000913 ! Fit after self-cal, rms=0.243325Jy sigma=0.000912 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110352 Jy ! Component: 100 - total flux cleaned = -0.00102269 Jy ! Component: 150 - total flux cleaned = -0.00102409 Jy ! Component: 200 - total flux cleaned = -0.00109055 Jy ! Total flux subtracted in 200 components = -0.00109055 Jy ! Clean residual min=-0.009175 max=0.008995 Jy/beam ! Clean residual mean=-0.000021 rms=0.002245 Jy/beam ! Combined flux in latest and established models = 0.795916 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 126 components and 0.795916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243206Jy sigma=0.000912 ! Fit after self-cal, rms=0.243199Jy sigma=0.000912 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243199Jy sigma=0.000912 ! Fit after self-cal, rms=0.245223Jy sigma=0.000849 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.119 mas, bmaj=7.633 mas, bpa=4.88 degrees ! Estimated noise=1117.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00208992 Jy ! Component: 100 - total flux cleaned = -0.00244531 Jy ! Component: 150 - total flux cleaned = -0.00267333 Jy ! Component: 200 - total flux cleaned = -0.00296492 Jy ! Total flux subtracted in 200 components = -0.00296492 Jy ! Clean residual min=-0.006447 max=0.005721 Jy/beam ! Clean residual mean=-0.000013 rms=0.001519 Jy/beam ! Combined flux in latest and established models = 0.792951 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 134 components and 0.792951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244862Jy sigma=0.000846 ! Fit after self-cal, rms=0.244873Jy sigma=0.000845 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000935426 Jy ! Component: 100 - total flux cleaned = -0.000711033 Jy ! Component: 150 - total flux cleaned = -0.00043755 Jy ! Component: 200 - total flux cleaned = -0.000375002 Jy ! Total flux subtracted in 200 components = -0.000375002 Jy ! Clean residual min=-0.006356 max=0.005560 Jy/beam ! Clean residual mean=-0.000014 rms=0.001474 Jy/beam ! Combined flux in latest and established models = 0.792576 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 138 components and 0.792576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244796Jy sigma=0.000845 ! Fit after self-cal, rms=0.244795Jy sigma=0.000845 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244795Jy sigma=0.000845 ! Fit after self-cal, rms=0.245676Jy sigma=0.000825 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.449 mas, bmaj=16.52 mas, bpa=8.855 degrees ! Estimated noise=1456.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00173028 Jy ! Component: 100 - total flux cleaned = -0.00191981 Jy ! Component: 150 - total flux cleaned = -0.00202288 Jy ! Component: 200 - total flux cleaned = -0.00198243 Jy ! Total flux subtracted in 200 components = -0.00198243 Jy ! Clean residual min=-0.005556 max=0.005653 Jy/beam ! Clean residual mean=-0.000026 rms=0.001588 Jy/beam ! Combined flux in latest and established models = 0.790594 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 155 components and 0.790594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245627Jy sigma=0.000825 ! Fit after self-cal, rms=0.245643Jy sigma=0.000824 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000273194 Jy ! Component: 100 - total flux cleaned = -0.000231843 Jy ! Component: 150 - total flux cleaned = -0.000116568 Jy ! Component: 200 - total flux cleaned = -8.23999e-05 Jy ! Total flux subtracted in 200 components = -8.23999e-05 Jy ! Clean residual min=-0.005559 max=0.005605 Jy/beam ! Clean residual mean=-0.000027 rms=0.001589 Jy/beam ! Combined flux in latest and established models = 0.790512 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 161 components and 0.790511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245627Jy sigma=0.000824 ! Fit after self-cal, rms=0.245631Jy sigma=0.000824 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.12 mas, bmaj=7.634 mas, bpa=4.858 degrees ! Estimated noise=1118.62 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.12 x 7.634 at 4.858 degrees (North through East) ! Clean map min=-0.0091703 max=0.68314 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245631Jy sigma=0.000824 ! Fit after self-cal, rms=0.243655Jy sigma=0.000738 ! Inverting map and beam ! Estimated beam: bmin=3.121 mas, bmaj=7.639 mas, bpa=4.783 degrees ! Estimated noise=1117.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00153086 Jy ! Component: 100 - total flux cleaned = -0.00196721 Jy ! Component: 150 - total flux cleaned = -0.00212485 Jy ! Component: 200 - total flux cleaned = -0.00217017 Jy ! Total flux subtracted in 200 components = -0.00217017 Jy ! Clean residual min=-0.004027 max=0.004994 Jy/beam ! Clean residual mean=-0.000008 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 0.788341 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 173 components and 0.788341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243660Jy sigma=0.000738 ! Fit after self-cal, rms=0.243659Jy sigma=0.000738 ! Inverting map ! Added new window around map position (-40.5, 19.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00404673 Jy ! Component: 100 - total flux cleaned = 0.0050208 Jy ! Component: 150 - total flux cleaned = 0.00547591 Jy ! Component: 200 - total flux cleaned = 0.00592292 Jy ! Total flux subtracted in 200 components = 0.00592292 Jy ! Clean residual min=-0.003549 max=0.003784 Jy/beam ! Clean residual mean=-0.000008 rms=0.000875 Jy/beam ! Combined flux in latest and established models = 0.794264 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 198 components and 0.794264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243531Jy sigma=0.000735 ! Fit after self-cal, rms=0.243529Jy sigma=0.000735 ! Inverting map ! Added new window around map position (24, -54.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00299309 Jy ! Component: 100 - total flux cleaned = 0.00358839 Jy ! Component: 150 - total flux cleaned = 0.00377844 Jy ! Component: 200 - total flux cleaned = 0.00400722 Jy ! Total flux subtracted in 200 components = 0.00400722 Jy ! Clean residual min=-0.003399 max=0.003267 Jy/beam ! Clean residual mean=-0.000000 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.798271 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 215 components and 0.798271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243413Jy sigma=0.000734 ! Fit after self-cal, rms=0.243432Jy sigma=0.000734 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243432Jy sigma=0.000734 ! Fit after self-cal, rms=0.244610Jy sigma=0.000734 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.337 mas, bmaj=6.225 mas, bpa=4.596 degrees ! Estimated noise=1548.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.524863 Jy ! Component: 100 - total flux cleaned = 0.643306 Jy ! Component: 150 - total flux cleaned = 0.693419 Jy ! Component: 200 - total flux cleaned = 0.722958 Jy ! Total flux subtracted in 200 components = 0.722958 Jy ! Clean residual min=-0.010542 max=0.015533 Jy/beam ! Clean residual mean=-0.000042 rms=0.002487 Jy/beam ! Combined flux in latest and established models = 0.722957 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.722957 Jy ! Inverting map and beam ! Estimated beam: bmin=3.122 mas, bmaj=7.642 mas, bpa=4.761 degrees ! Estimated noise=1117.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0281951 Jy ! Component: 100 - total flux cleaned = 0.0432137 Jy ! Component: 150 - total flux cleaned = 0.0517982 Jy ! Component: 200 - total flux cleaned = 0.057373 Jy ! Total flux subtracted in 200 components = 0.057373 Jy ! Clean residual min=-0.004259 max=0.004337 Jy/beam ! Clean residual mean=-0.000028 rms=0.001062 Jy/beam ! Combined flux in latest and established models = 0.78033 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 79 components and 0.780331 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.454 mas, bmaj=16.54 mas, bpa=8.81 degrees ! Estimated noise=1453.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00531144 Jy ! Component: 100 - total flux cleaned = 0.00878641 Jy ! Component: 150 - total flux cleaned = 0.0113165 Jy ! Component: 200 - total flux cleaned = 0.0130715 Jy ! Total flux subtracted in 200 components = 0.0130715 Jy ! Clean residual min=-0.003347 max=0.003357 Jy/beam ! Clean residual mean=-0.000010 rms=0.001053 Jy/beam ! Combined flux in latest and established models = 0.793402 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00050655 Jy ! Component: 100 - total flux cleaned = 0.000793208 Jy ! Component: 150 - total flux cleaned = 0.00101066 Jy ! Component: 200 - total flux cleaned = 0.00126837 Jy ! Total flux subtracted in 200 components = 0.00126837 Jy ! Clean residual min=-0.003311 max=0.003232 Jy/beam ! Clean residual mean=-0.000006 rms=0.001022 Jy/beam ! Combined flux in latest and established models = 0.79467 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 144 components and 0.794671 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.122 mas, bmaj=7.642 mas, bpa=4.761 degrees ! Estimated noise=1117.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000740706 Jy ! Component: 100 - total flux cleaned = 0.000833515 Jy ! Component: 150 - total flux cleaned = 0.00123903 Jy ! Component: 200 - total flux cleaned = 0.00138486 Jy ! Total flux subtracted in 200 components = 0.00138486 Jy ! Clean residual min=-0.003567 max=0.003636 Jy/beam ! Clean residual mean=-0.000001 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 0.796055 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 164 components and 0.796055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244727Jy sigma=0.000735 ! Fit after self-cal, rms=0.244685Jy sigma=0.000734 wmodel J2129-1538_S_2015_01_23_pus_map.mod ! Writing 164 model components to file: J2129-1538_S_2015_01_23_pus_map.mod wobs J2129-1538_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J2129-1538_S_2015_01_23_pus_uvs.fits wwins J2129-1538_S_2015_01_23_pus_map.win ! wwins: Wrote 4 windows to J2129-1538_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00044443 Jy ! Component: 100 - total flux cleaned = -0.00102842 Jy ! Component: 150 - total flux cleaned = -0.00152247 Jy ! Component: 200 - total flux cleaned = -0.00178351 Jy ! Component: 250 - total flux cleaned = -0.00213484 Jy ! Component: 300 - total flux cleaned = -0.00237587 Jy ! Component: 350 - total flux cleaned = -0.00232773 Jy ! Component: 400 - total flux cleaned = -0.00228168 Jy ! Component: 450 - total flux cleaned = -0.00219325 Jy ! Component: 500 - total flux cleaned = -0.00223729 Jy ! Component: 550 - total flux cleaned = -0.00223808 Jy ! Component: 600 - total flux cleaned = -0.00215614 Jy ! Component: 650 - total flux cleaned = -0.00211623 Jy ! Component: 700 - total flux cleaned = -0.00211536 Jy ! Component: 750 - total flux cleaned = -0.00215412 Jy ! Component: 800 - total flux cleaned = -0.00227 Jy ! Component: 850 - total flux cleaned = -0.00238395 Jy ! Component: 900 - total flux cleaned = -0.00257075 Jy ! Component: 950 - total flux cleaned = -0.00264459 Jy ! Component: 1000 - total flux cleaned = -0.00278916 Jy ! Component: 1050 - total flux cleaned = -0.00286042 Jy ! Component: 1100 - total flux cleaned = -0.00289592 Jy ! Component: 1150 - total flux cleaned = -0.00296596 Jy ! Component: 1200 - total flux cleaned = -0.0032071 Jy ! Component: 1250 - total flux cleaned = -0.00320667 Jy ! Component: 1300 - total flux cleaned = -0.00324054 Jy ! Component: 1350 - total flux cleaned = -0.00334063 Jy ! Component: 1400 - total flux cleaned = -0.0034726 Jy ! Component: 1450 - total flux cleaned = -0.00347345 Jy ! Component: 1500 - total flux cleaned = -0.00370026 Jy ! Component: 1550 - total flux cleaned = -0.00370013 Jy ! Component: 1600 - total flux cleaned = -0.00382747 Jy ! Component: 1650 - total flux cleaned = -0.00385908 Jy ! Component: 1700 - total flux cleaned = -0.00404605 Jy ! Component: 1750 - total flux cleaned = -0.00410751 Jy ! Component: 1800 - total flux cleaned = -0.00416869 Jy ! Component: 1850 - total flux cleaned = -0.00425938 Jy ! Component: 1900 - total flux cleaned = -0.00437975 Jy ! Component: 1950 - total flux cleaned = -0.00455846 Jy ! Component: 2000 - total flux cleaned = -0.0047055 Jy ! Component: 2050 - total flux cleaned = -0.00476372 Jy ! Component: 2100 - total flux cleaned = -0.00487964 Jy ! Component: 2150 - total flux cleaned = -0.00496606 Jy ! Component: 2200 - total flux cleaned = -0.0051091 Jy ! Component: 2250 - total flux cleaned = -0.00527924 Jy ! Component: 2300 - total flux cleaned = -0.00536332 Jy ! Component: 2350 - total flux cleaned = -0.00553062 Jy ! Component: 2400 - total flux cleaned = -0.00561332 Jy ! Component: 2450 - total flux cleaned = -0.00564101 Jy ! Component: 2500 - total flux cleaned = -0.00577773 Jy ! Component: 2550 - total flux cleaned = -0.00585887 Jy ! Component: 2600 - total flux cleaned = -0.00591266 Jy ! Component: 2650 - total flux cleaned = -0.00610003 Jy ! Component: 2700 - total flux cleaned = -0.00604662 Jy ! Component: 2750 - total flux cleaned = -0.00609935 Jy ! Component: 2800 - total flux cleaned = -0.00620425 Jy ! Component: 2850 - total flux cleaned = -0.00625621 Jy ! Component: 2900 - total flux cleaned = -0.00628219 Jy ! Component: 2950 - total flux cleaned = -0.00641093 Jy ! Component: 3000 - total flux cleaned = -0.00646192 Jy ! Component: 3050 - total flux cleaned = -0.00641105 Jy ! Component: 3100 - total flux cleaned = -0.00643628 Jy ! Component: 3150 - total flux cleaned = -0.00643647 Jy ! Component: 3200 - total flux cleaned = -0.00651161 Jy ! Component: 3250 - total flux cleaned = -0.00658613 Jy ! Component: 3300 - total flux cleaned = -0.00661074 Jy ! Component: 3350 - total flux cleaned = -0.00651209 Jy ! Component: 3400 - total flux cleaned = -0.00665922 Jy ! Component: 3450 - total flux cleaned = -0.006659 Jy ! Component: 3500 - total flux cleaned = -0.00665889 Jy ! Component: 3550 - total flux cleaned = -0.00665869 Jy ! Component: 3600 - total flux cleaned = -0.00663462 Jy ! Component: 3650 - total flux cleaned = -0.00665854 Jy ! Component: 3700 - total flux cleaned = -0.0067536 Jy ! Component: 3750 - total flux cleaned = -0.00668259 Jy ! Component: 3800 - total flux cleaned = -0.00672947 Jy ! Component: 3850 - total flux cleaned = -0.00668263 Jy ! Component: 3900 - total flux cleaned = -0.00668256 Jy ! Component: 3950 - total flux cleaned = -0.00672915 Jy ! Component: 4000 - total flux cleaned = -0.00665978 Jy ! Component: 4050 - total flux cleaned = -0.00672873 Jy ! Total flux subtracted in 4096 components = -0.00668301 Jy ! Clean residual min=-0.001303 max=0.001407 Jy/beam ! Clean residual mean=-0.000001 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.789373 Jy keep ! Adding 265 model components to the UV plane model. ! The established model now contains 429 components and 0.789373 Jy ![Exited script file: muppet] wmap "J2129-1538_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.122 x 7.642 at 4.761 degrees (North through East) ! Clean map min=-0.0033736 max=0.69005 Jy/beam ! Writing clean map to FITS file: J2129-1538_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.690046 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000410612 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.178515 0.178515 0.35703 0.71406 1.42812 2.85624 5.71248 11.425 22.8499 45.6998 91.3997 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.69 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.122 x 7.642 at 4.761 degrees (North through East) ! Clean map min=-0.0033736 max=0.69005 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2129-1538_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:35:11 2017