! Started logfile: J2129-1538_S_2014_12_20_pus_uvs.log on Wed Dec 28 13:47:48 2016
obs J2129-1538_S_2014_12_20_pus_uva.fits
! Reading UV FITS file: J2129-1538_S_2014_12_20_pus_uva.fits
! AN table 1: 14 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.119048 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J2129-1538
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 344 lines of history.
! 
! Reading 300 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J2129-1538_S_2014_12_20_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 87 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 87 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 87 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 87 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.390822Jy  sigma=0.003278
! Fit after  self-cal, rms=0.368842Jy  sigma=0.003103
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.696 mas, bmaj=11.46 mas, bpa=26.21 degrees
! Estimated noise=5354.01 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.507399 Jy
! Component: 100  -  total flux cleaned = 0.626358 Jy
! Total flux subtracted in 100 components = 0.626358 Jy
! Clean residual min=-0.035478 max=0.046476 Jy/beam
! Clean residual mean=-0.000059 rms=0.015195 Jy/beam
! Combined flux in latest and established models = 0.626357 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.626357 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.160307Jy  sigma=0.001057
! Fit after  self-cal, rms=0.160287Jy  sigma=0.001057
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.706 mas, bmaj=11.73 mas, bpa=28.12 degrees
! Estimated noise=5087.3 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0322913 Jy
! Component: 100  -  total flux cleaned = 0.0322242 Jy
! Component: 150  -  total flux cleaned = 0.0240015 Jy
! Component: 200  -  total flux cleaned = 0.0123291 Jy
! Total flux subtracted in 200 components = 0.0123291 Jy
! Clean residual min=-0.013980 max=0.014019 Jy/beam
! Clean residual mean=-0.000012 rms=0.005398 Jy/beam
! Combined flux in latest and established models = 0.638687 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 50 components and 0.638687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.127821Jy  sigma=0.000886
! Fit after  self-cal, rms=0.127619Jy  sigma=0.000884
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00*    HN        0.94     KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.05     OV        1.00*    
!   PT        1.00*    SC        1.03     
! 
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.00*    HN        0.97     KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        0.75     OV        1.00*    
!   PT        1.00*    SC        1.02     
! 
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00*    HN        0.98     KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.18     OV        1.00*    
!   PT        1.00*    SC        1.03     
! 
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00*    HN        0.94     KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        0.97     OV        1.00*    
!   PT        1.00*    SC        1.03     
! 
! 
! Fit before self-cal, rms=0.127619Jy  sigma=0.000884
! Fit after  self-cal, rms=0.087236Jy  sigma=0.000697
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.809 mas, bmaj=11.32 mas, bpa=27.58 degrees
! Estimated noise=5339.63 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00193005 Jy
! Component: 100  -  total flux cleaned = -0.00226702 Jy
! Component: 150  -  total flux cleaned = -0.00156924 Jy
! Component: 200  -  total flux cleaned = -0.0011439 Jy
! Total flux subtracted in 200 components = -0.0011439 Jy
! Clean residual min=-0.003409 max=0.003348 Jy/beam
! Clean residual mean=0.000001 rms=0.001040 Jy/beam
! Combined flux in latest and established models = 0.637543 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 94 components and 0.637543 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085647Jy  sigma=0.000684
! Fit after  self-cal, rms=0.085498Jy  sigma=0.000683
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085498Jy  sigma=0.000683
! Fit after  self-cal, rms=0.085380Jy  sigma=0.000682
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.809 mas, bmaj=11.32 mas, bpa=27.58 degrees
! Estimated noise=5337.51 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00193504 Jy
! Component: 100  -  total flux cleaned = -0.00194887 Jy
! Component: 150  -  total flux cleaned = -0.00181903 Jy
! Component: 200  -  total flux cleaned = -0.00182121 Jy
! Total flux subtracted in 200 components = -0.00182121 Jy
! Clean residual min=-0.001969 max=0.001956 Jy/beam
! Clean residual mean=0.000001 rms=0.000624 Jy/beam
! Combined flux in latest and established models = 0.635722 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 128 components and 0.635722 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084960Jy  sigma=0.000679
! Fit after  self-cal, rms=0.084939Jy  sigma=0.000679
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000447506 Jy
! Component: 100  -  total flux cleaned = 0.00134215 Jy
! Component: 150  -  total flux cleaned = 0.00257586 Jy
! Component: 200  -  total flux cleaned = 0.00304854 Jy
! Total flux subtracted in 200 components = 0.00304854 Jy
! Clean residual min=-0.001291 max=0.001305 Jy/beam
! Clean residual mean=0.000001 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.63877 Jy
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 177 components and 0.63877 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084777Jy  sigma=0.000677
! Fit after  self-cal, rms=0.084766Jy  sigma=0.000677
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084766Jy  sigma=0.000677
! Fit after  self-cal, rms=0.084604Jy  sigma=0.000677
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.809 mas, bmaj=11.32 mas, bpa=27.59 degrees
! Estimated noise=5329.49 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00147874 Jy
! Component: 100  -  total flux cleaned = -0.000982409 Jy
! Component: 150  -  total flux cleaned = -0.00104417 Jy
! Component: 200  -  total flux cleaned = -0.00142634 Jy
! Total flux subtracted in 200 components = -0.00142634 Jy
! Clean residual min=-0.001064 max=0.001051 Jy/beam
! Clean residual mean=0.000000 rms=0.000341 Jy/beam
! Combined flux in latest and established models = 0.637344 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 201 components and 0.637344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084501Jy  sigma=0.000676
! Fit after  self-cal, rms=0.084493Jy  sigma=0.000676
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000389169 Jy
! Component: 100  -  total flux cleaned = 0.000841723 Jy
! Component: 150  -  total flux cleaned = 0.00131587 Jy
! Component: 200  -  total flux cleaned = 0.00181949 Jy
! Total flux subtracted in 200 components = 0.00181949 Jy
! Clean residual min=-0.000753 max=0.000753 Jy/beam
! Clean residual mean=0.000000 rms=0.000258 Jy/beam
! Combined flux in latest and established models = 0.639163 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 231 components and 0.639163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084443Jy  sigma=0.000676
! Fit after  self-cal, rms=0.084438Jy  sigma=0.000676
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084438Jy  sigma=0.000676
! Fit after  self-cal, rms=0.084364Jy  sigma=0.000676
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.529 mas, bmaj=12.2 mas, bpa=25.01 degrees
! Estimated noise=7073.3 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000166492 Jy
! Component: 100  -  total flux cleaned = 0.000140946 Jy
! Component: 150  -  total flux cleaned = 4.94002e-05 Jy
! Component: 200  -  total flux cleaned = 2.49143e-06 Jy
! Total flux subtracted in 200 components = 2.49143e-06 Jy
! Clean residual min=-0.000400 max=0.000402 Jy/beam
! Clean residual mean=-0.000000 rms=0.000123 Jy/beam
! Combined flux in latest and established models = 0.639166 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 260 components and 0.639165 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084345Jy  sigma=0.000676
! Fit after  self-cal, rms=0.084343Jy  sigma=0.000676
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (123.5, -126).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000244938 Jy
! Component: 100  -  total flux cleaned = 0.000208412 Jy
! Component: 150  -  total flux cleaned = 0.000127927 Jy
! Component: 200  -  total flux cleaned = -2.33127e-06 Jy
! Total flux subtracted in 200 components = -2.33127e-06 Jy
! Clean residual min=-0.000554 max=0.000584 Jy/beam
! Clean residual mean=0.000000 rms=0.000163 Jy/beam
! Combined flux in latest and established models = 0.639163 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 269 components and 0.639163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084334Jy  sigma=0.000676
! Fit after  self-cal, rms=0.084333Jy  sigma=0.000676
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.808 mas, bmaj=11.32 mas, bpa=27.59 degrees
! Estimated noise=5325.3 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.808 x 11.32 at 27.59 degrees (North through East)
! Clean map  min=-0.013819  max=0.61281 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084333Jy  sigma=0.000676
! Fit after  self-cal, rms=0.064666Jy  sigma=0.000504
! Inverting map and beam 
! Estimated beam: bmin=2.807 mas, bmaj=11.32 mas, bpa=27.59 degrees
! Estimated noise=5323.26 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000595426 Jy
! Component: 100  -  total flux cleaned = -0.000610634 Jy
! Component: 150  -  total flux cleaned = -0.000681952 Jy
! Component: 200  -  total flux cleaned = -0.000728152 Jy
! Total flux subtracted in 200 components = -0.000728152 Jy
! Clean residual min=-0.001238 max=0.001243 Jy/beam
! Clean residual mean=-0.000000 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.638435 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 287 components and 0.638435 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064637Jy  sigma=0.000504
! Fit after  self-cal, rms=0.064639Jy  sigma=0.000504
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000260609 Jy
! Component: 100  -  total flux cleaned = -0.000393986 Jy
! Component: 150  -  total flux cleaned = -0.000500564 Jy
! Component: 200  -  total flux cleaned = -0.000599401 Jy
! Total flux subtracted in 200 components = -0.000599401 Jy
! Clean residual min=-0.001072 max=0.001103 Jy/beam
! Clean residual mean=-0.000000 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.637836 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 307 components and 0.637836 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064632Jy  sigma=0.000504
! Fit after  self-cal, rms=0.064633Jy  sigma=0.000504
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064633Jy  sigma=0.000504
! Fit after  self-cal, rms=0.064604Jy  sigma=0.000504
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.711 mas, bmaj=11.42 mas, bpa=25.92 degrees
! Estimated noise=5583.69 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0212789 Jy
! Component: 100  -  total flux cleaned = -0.0542013 Jy
! Component: 150  -  total flux cleaned = -0.0925462 Jy
! Component: 200  -  total flux cleaned = -0.12516 Jy
! Total flux subtracted in 200 components = -0.12516 Jy
! Clean residual min=-0.247051 max=0.507226 Jy/beam
! Clean residual mean=-0.000247 rms=0.111115 Jy/beam
! Combined flux in latest and established models = -0.12516 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and -0.12516 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.807 mas, bmaj=11.32 mas, bpa=27.59 degrees
! Estimated noise=5319.68 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.397893 Jy
! Component: 100  -  total flux cleaned = 0.401896 Jy
! Component: 150  -  total flux cleaned = 0.459797 Jy
! Component: 200  -  total flux cleaned = 0.508722 Jy
! Total flux subtracted in 200 components = 0.508722 Jy
! Clean residual min=-0.074238 max=0.111522 Jy/beam
! Clean residual mean=-0.000065 rms=0.021893 Jy/beam
! Combined flux in latest and established models = 0.383562 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 39 components and 0.383562 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.529 mas, bmaj=12.2 mas, bpa=25.01 degrees
! Estimated noise=7069 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0133914 Jy
! Component: 100  -  total flux cleaned = 0.0367359 Jy
! Component: 150  -  total flux cleaned = 0.0581525 Jy
! Component: 200  -  total flux cleaned = 0.0747247 Jy
! Total flux subtracted in 200 components = 0.0747247 Jy
! Clean residual min=-0.055503 max=0.062044 Jy/beam
! Clean residual mean=-0.000092 rms=0.015625 Jy/beam
! Combined flux in latest and established models = 0.458287 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00420137 Jy
! Component: 100  -  total flux cleaned = 0.0158172 Jy
! Component: 150  -  total flux cleaned = 0.0309877 Jy
! Component: 200  -  total flux cleaned = 0.0428079 Jy
! Total flux subtracted in 200 components = 0.0428079 Jy
! Clean residual min=-0.053348 max=0.060833 Jy/beam
! Clean residual mean=-0.000112 rms=0.013396 Jy/beam
! Combined flux in latest and established models = 0.501095 Jy
! Adding 69 model components to the UV plane model.
! The established model now contains 103 components and 0.501095 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.807 mas, bmaj=11.32 mas, bpa=27.59 degrees
! Estimated noise=5319.68 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0178307 Jy
! Component: 100  -  total flux cleaned = 0.0321388 Jy
! Component: 150  -  total flux cleaned = 0.0409701 Jy
! Component: 200  -  total flux cleaned = 0.0504227 Jy
! Total flux subtracted in 200 components = 0.0504227 Jy
! Clean residual min=-0.029362 max=0.025512 Jy/beam
! Clean residual mean=-0.000021 rms=0.006366 Jy/beam
! Combined flux in latest and established models = 0.551517 Jy
selfcal
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 142 components and 0.551518 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080175Jy  sigma=0.000628
! Fit after  self-cal, rms=0.079168Jy  sigma=0.000619
wmodel J2129-1538_S_2014_12_20_pus_map.mod
! Writing 142 model components to file: J2129-1538_S_2014_12_20_pus_map.mod
wobs J2129-1538_S_2014_12_20_pus_uvs.fits
! Writing UV FITS file: J2129-1538_S_2014_12_20_pus_uvs.fits
wwins J2129-1538_S_2014_12_20_pus_map.win
! wwins: Wrote 2 windows to J2129-1538_S_2014_12_20_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00679041 Jy
! Component: 100  -  total flux cleaned = -0.00779251 Jy
! Component: 150  -  total flux cleaned = -0.00648033 Jy
! Component: 200  -  total flux cleaned = -0.0055291 Jy
! Component: 250  -  total flux cleaned = -0.00510622 Jy
! Component: 300  -  total flux cleaned = -0.00490478 Jy
! Component: 350  -  total flux cleaned = -0.00509548 Jy
! Component: 400  -  total flux cleaned = -0.0050931 Jy
! Component: 450  -  total flux cleaned = -0.00562704 Jy
! Component: 500  -  total flux cleaned = -0.00597567 Jy
! Component: 550  -  total flux cleaned = -0.00735103 Jy
! Component: 600  -  total flux cleaned = -0.00889553 Jy
! Component: 650  -  total flux cleaned = -0.0109615 Jy
! Component: 700  -  total flux cleaned = -0.0125199 Jy
! Component: 750  -  total flux cleaned = -0.013924 Jy
! Component: 800  -  total flux cleaned = -0.0155272 Jy
! Component: 850  -  total flux cleaned = -0.0169825 Jy
! Component: 900  -  total flux cleaned = -0.0171623 Jy
! Component: 950  -  total flux cleaned = -0.0169638 Jy
! Component: 1000  -  total flux cleaned = -0.0169638 Jy
! Component: 1050  -  total flux cleaned = -0.0167422 Jy
! Component: 1100  -  total flux cleaned = -0.0167416 Jy
! Component: 1150  -  total flux cleaned = -0.0167468 Jy
! Component: 1200  -  total flux cleaned = -0.0167446 Jy
! Component: 1250  -  total flux cleaned = -0.0167431 Jy
! Component: 1300  -  total flux cleaned = -0.0170283 Jy
! Component: 1350  -  total flux cleaned = -0.017031 Jy
! Component: 1400  -  total flux cleaned = -0.0170306 Jy
! Component: 1450  -  total flux cleaned = -0.0173635 Jy
! Component: 1500  -  total flux cleaned = -0.0173608 Jy
! Component: 1550  -  total flux cleaned = -0.0177371 Jy
! Component: 1600  -  total flux cleaned = -0.0185489 Jy
! Component: 1650  -  total flux cleaned = -0.0189842 Jy
! Component: 1700  -  total flux cleaned = -0.019909 Jy
! Component: 1750  -  total flux cleaned = -0.0204039 Jy
! Component: 1800  -  total flux cleaned = -0.0209292 Jy
! Component: 1850  -  total flux cleaned = -0.0214715 Jy
! Component: 1900  -  total flux cleaned = -0.022638 Jy
! Component: 1950  -  total flux cleaned = -0.0232545 Jy
! Component: 2000  -  total flux cleaned = -0.0245735 Jy
! Component: 2050  -  total flux cleaned = -0.0252745 Jy
! Component: 2100  -  total flux cleaned = -0.0267838 Jy
! Component: 2150  -  total flux cleaned = -0.027582 Jy
! Component: 2200  -  total flux cleaned = -0.0284065 Jy
! Component: 2250  -  total flux cleaned = -0.0302102 Jy
! Component: 2300  -  total flux cleaned = -0.0311765 Jy
! Component: 2350  -  total flux cleaned = -0.032201 Jy
! Component: 2400  -  total flux cleaned = -0.0332672 Jy
! Component: 2450  -  total flux cleaned = -0.0344206 Jy
! Component: 2500  -  total flux cleaned = -0.0356601 Jy
! Component: 2550  -  total flux cleaned = -0.0369561 Jy
! Component: 2600  -  total flux cleaned = -0.038352 Jy
! Component: 2650  -  total flux cleaned = -0.039846 Jy
! Component: 2700  -  total flux cleaned = -0.0398429 Jy
! Component: 2750  -  total flux cleaned = -0.0415019 Jy
! Component: 2800  -  total flux cleaned = -0.0432926 Jy
! Component: 2850  -  total flux cleaned = -0.0452229 Jy
! Component: 2900  -  total flux cleaned = -0.0452381 Jy
! Component: 2950  -  total flux cleaned = -0.0474299 Jy
! Component: 3000  -  total flux cleaned = -0.0497723 Jy
! Component: 3050  -  total flux cleaned = -0.0498102 Jy
! Component: 3100  -  total flux cleaned = -0.0523983 Jy
! Component: 3150  -  total flux cleaned = -0.0552563 Jy
! Component: 3200  -  total flux cleaned = -0.0552506 Jy
! Component: 3250  -  total flux cleaned = -0.058451 Jy
! Component: 3300  -  total flux cleaned = -0.0618347 Jy
! Component: 3350  -  total flux cleaned = -0.0618684 Jy
! Component: 3400  -  total flux cleaned = -0.0656512 Jy
! Component: 3450  -  total flux cleaned = -0.0696676 Jy
! Component: 3500  -  total flux cleaned = -0.0696449 Jy
! Component: 3550  -  total flux cleaned = -0.0740787 Jy
! Component: 3600  -  total flux cleaned = -0.0789545 Jy
! Component: 3650  -  total flux cleaned = -0.0841841 Jy
! Component: 3700  -  total flux cleaned = -0.0841464 Jy
! Component: 3750  -  total flux cleaned = -0.0900256 Jy
! Component: 3800  -  total flux cleaned = -0.0965498 Jy
! Component: 3850  -  total flux cleaned = -0.0965564 Jy
! Component: 3900  -  total flux cleaned = -0.103543 Jy
! Component: 3950  -  total flux cleaned = -0.111235 Jy
! Component: 4000  -  total flux cleaned = -0.119582 Jy
! Component: 4050  -  total flux cleaned = -0.119502 Jy
! Total flux subtracted in 4096 components = -0.12849 Jy
! Clean residual min=-0.507581 max=0.477471 Jy/beam
! Clean residual mean=-0.000082 rms=0.091765 Jy/beam
! Combined flux in latest and established models = 0.423027 Jy
keep
! Adding 96 model components to the UV plane model.
! The established model now contains 238 components and 0.423027 Jy
![Exited script file: muppet]
wmap "J2129-1538_S_2014_12_20_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.807 x 11.32 at 27.59 degrees (North through East)
! Clean map  min=-0.64966  max=0.72622 Jy/beam
! Writing clean map to FITS file: J2129-1538_S_2014_12_20_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.726217 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0708445 
device "J2129-1538_S_2014_12_20_pus\_map.eps/VPS"
! Attempting to open device: 'J2129-1538_S_2014_12_20_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -29.2659 29.2659 58.5317
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.2125 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.726 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.807 x 11.32 at 27.59 degrees (North through East)
! Clean map  min=-0.64966  max=0.72622 Jy/beam
quit
! Quitting program
! Log file J2129-1538_S_2014_12_20_pus_uvs.log closed on Wed Dec 28 13:47:53 2016