! Started logfile: J2116+0536_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:36:15 2017 obs J2116+0536_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J2116+0536_S_2014_01_04_pus_uva.fits ! AN table 1: 75 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.501111 visibilities/baseline/integration-bin. ! Found source: J2116+0536 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 5412 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2116+0536_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.884104Jy sigma=0.012161 ! Fit after self-cal, rms=0.863043Jy sigma=0.011868 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.675 mas, bmaj=5.469 mas, bpa=0.1133 degrees ! Estimated noise=1098.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106169 Jy ! Component: 100 - total flux cleaned = 0.129403 Jy ! Total flux subtracted in 100 components = 0.129403 Jy ! Clean residual min=-0.005761 max=0.007711 Jy/beam ! Clean residual mean=-0.000017 rms=0.001519 Jy/beam ! Combined flux in latest and established models = 0.129403 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.129403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079696Jy sigma=0.000934 ! Fit after self-cal, rms=0.079682Jy sigma=0.000934 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.167 mas, bmaj=6.268 mas, bpa=-0.3665 degrees ! Estimated noise=744.269 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00900958 Jy ! Component: 100 - total flux cleaned = 0.0129934 Jy ! Component: 150 - total flux cleaned = 0.0145309 Jy ! Component: 200 - total flux cleaned = 0.0147635 Jy ! Total flux subtracted in 200 components = 0.0147635 Jy ! Clean residual min=-0.004713 max=0.006255 Jy/beam ! Clean residual mean=-0.000027 rms=0.001393 Jy/beam ! Combined flux in latest and established models = 0.144166 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 16 components and 0.144166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078389Jy sigma=0.000927 ! Fit after self-cal, rms=0.078308Jy sigma=0.000927 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* KP 1.00* LA 1.03 ! MK 0.95 NL 0.96 OV 0.97 PT 1.02 ! SC 0.90 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.00* KP 1.00* LA 1.00 ! MK 0.96 NL 1.05 OV 1.00 PT 0.94 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* KP 1.00* LA 0.80 ! MK 1.05 NL 0.99 OV 0.92 PT 0.94 ! SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.00* KP 1.00* LA 0.91 ! MK 0.99 NL 1.08 OV 0.99 PT 0.96 ! SC 0.93 ! ! ! Fit before self-cal, rms=0.078308Jy sigma=0.000927 ! Fit after self-cal, rms=0.073524Jy sigma=0.000904 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.134 mas, bmaj=6.313 mas, bpa=-0.03787 degrees ! Estimated noise=739.512 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000134171 Jy ! Component: 100 - total flux cleaned = 0.000397015 Jy ! Component: 150 - total flux cleaned = 0.00052349 Jy ! Component: 200 - total flux cleaned = 0.000641811 Jy ! Total flux subtracted in 200 components = 0.000641811 Jy ! Clean residual min=-0.003102 max=0.003522 Jy/beam ! Clean residual mean=-0.000012 rms=0.000815 Jy/beam ! Combined flux in latest and established models = 0.144808 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 22 components and 0.144808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073482Jy sigma=0.000903 ! Fit after self-cal, rms=0.073113Jy sigma=0.000903 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073113Jy sigma=0.000903 ! Fit after self-cal, rms=0.073275Jy sigma=0.000901 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.131 mas, bmaj=6.306 mas, bpa=-0.1615 degrees ! Estimated noise=739.739 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000292578 Jy ! Component: 100 - total flux cleaned = 0.000428991 Jy ! Component: 150 - total flux cleaned = 0.000490987 Jy ! Component: 200 - total flux cleaned = 0.000569506 Jy ! Total flux subtracted in 200 components = 0.000569506 Jy ! Clean residual min=-0.003022 max=0.003287 Jy/beam ! Clean residual mean=-0.000009 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.145378 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 28 components and 0.145378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073251Jy sigma=0.000900 ! Fit after self-cal, rms=0.073260Jy sigma=0.000900 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, 13.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00276883 Jy ! Component: 100 - total flux cleaned = 0.00382348 Jy ! Component: 150 - total flux cleaned = 0.00433914 Jy ! Component: 200 - total flux cleaned = 0.00463827 Jy ! Total flux subtracted in 200 components = 0.00463827 Jy ! Clean residual min=-0.002495 max=0.002451 Jy/beam ! Clean residual mean=-0.000005 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.150016 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 41 components and 0.150016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073160Jy sigma=0.000899 ! Fit after self-cal, rms=0.073140Jy sigma=0.000898 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073140Jy sigma=0.000898 ! Fit after self-cal, rms=0.073029Jy sigma=0.000898 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.128 mas, bmaj=6.301 mas, bpa=-0.2134 degrees ! Estimated noise=738.863 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000441698 Jy ! Component: 100 - total flux cleaned = 0.000678596 Jy ! Component: 150 - total flux cleaned = 0.000895907 Jy ! Component: 200 - total flux cleaned = 0.00108235 Jy ! Total flux subtracted in 200 components = 0.00108235 Jy ! Clean residual min=-0.002386 max=0.002553 Jy/beam ! Clean residual mean=-0.000005 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.151098 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 59 components and 0.151098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073012Jy sigma=0.000898 ! Fit after self-cal, rms=0.073008Jy sigma=0.000898 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-58.5, 41.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141464 Jy ! Component: 100 - total flux cleaned = 0.00146478 Jy ! Component: 150 - total flux cleaned = 0.00146565 Jy ! Component: 200 - total flux cleaned = 0.00143077 Jy ! Total flux subtracted in 200 components = 0.00143077 Jy ! Clean residual min=-0.002230 max=0.002017 Jy/beam ! Clean residual mean=-0.000004 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.152529 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 76 components and 0.152529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072912Jy sigma=0.000897 ! Fit after self-cal, rms=0.072913Jy sigma=0.000897 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072913Jy sigma=0.000897 ! Fit after self-cal, rms=0.072918Jy sigma=0.000897 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.992 mas, bmaj=11.05 mas, bpa=9.369 degrees ! Estimated noise=913.964 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000465514 Jy ! Component: 100 - total flux cleaned = 0.000785492 Jy ! Component: 150 - total flux cleaned = 0.00109248 Jy ! Component: 200 - total flux cleaned = 0.00135112 Jy ! Total flux subtracted in 200 components = 0.00135112 Jy ! Clean residual min=-0.002247 max=0.002439 Jy/beam ! Clean residual mean=-0.000005 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.15388 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 103 components and 0.15388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072924Jy sigma=0.000897 ! Fit after self-cal, rms=0.072924Jy sigma=0.000897 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000168147 Jy ! Component: 100 - total flux cleaned = 0.000310569 Jy ! Component: 150 - total flux cleaned = 0.000426951 Jy ! Component: 200 - total flux cleaned = 0.000508892 Jy ! Total flux subtracted in 200 components = 0.000508892 Jy ! Clean residual min=-0.002197 max=0.002430 Jy/beam ! Clean residual mean=-0.000004 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.154389 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 119 components and 0.154389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072925Jy sigma=0.000897 ! Fit after self-cal, rms=0.072923Jy sigma=0.000897 ! Inverting map ! Added new window around map position (62, -98.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000490264 Jy ! Component: 100 - total flux cleaned = -0.00030125 Jy ! Component: 150 - total flux cleaned = -0.000797264 Jy ! Component: 200 - total flux cleaned = -0.00109086 Jy ! Total flux subtracted in 200 components = -0.00109086 Jy ! Clean residual min=-0.001582 max=0.001448 Jy/beam ! Clean residual mean=-0.000003 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.153298 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 150 components and 0.153298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072860Jy sigma=0.000896 ! Fit after self-cal, rms=0.072842Jy sigma=0.000896 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.129 mas, bmaj=6.299 mas, bpa=-0.2036 degrees ! Estimated noise=738.249 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.129 x 6.299 at -0.2036 degrees (North through East) ! Clean map min=-0.0018024 max=0.13582 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.645 mas, bmaj=5.507 mas, bpa=0.243 degrees ! Estimated noise=1086.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.105002 Jy ! Component: 100 - total flux cleaned = 0.128015 Jy ! Component: 150 - total flux cleaned = 0.135207 Jy ! Component: 200 - total flux cleaned = 0.138237 Jy ! Total flux subtracted in 200 components = 0.138237 Jy ! Clean residual min=-0.004181 max=0.004218 Jy/beam ! Clean residual mean=-0.000007 rms=0.000973 Jy/beam ! Combined flux in latest and established models = 0.138237 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.138237 Jy ! Inverting map and beam ! Estimated beam: bmin=3.129 mas, bmaj=6.299 mas, bpa=-0.2036 degrees ! Estimated noise=738.249 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00432131 Jy ! Component: 100 - total flux cleaned = 0.00573457 Jy ! Component: 150 - total flux cleaned = 0.00701215 Jy ! Component: 200 - total flux cleaned = 0.00769293 Jy ! Total flux subtracted in 200 components = 0.00769293 Jy ! Clean residual min=-0.002626 max=0.002017 Jy/beam ! Clean residual mean=-0.000008 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.14593 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 53 components and 0.14593 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.992 mas, bmaj=11.05 mas, bpa=9.369 degrees ! Estimated noise=913.964 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000583186 Jy ! Component: 100 - total flux cleaned = 0.000458137 Jy ! Component: 150 - total flux cleaned = 0.00071752 Jy ! Component: 200 - total flux cleaned = 0.000760968 Jy ! Total flux subtracted in 200 components = 0.000760968 Jy ! Clean residual min=-0.002033 max=0.001594 Jy/beam ! Clean residual mean=-0.000010 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.146691 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00015831 Jy ! Component: 100 - total flux cleaned = -0.000229049 Jy ! Component: 150 - total flux cleaned = -0.000417113 Jy ! Component: 200 - total flux cleaned = -0.000639884 Jy ! Total flux subtracted in 200 components = -0.000639884 Jy ! Clean residual min=-0.001937 max=0.001379 Jy/beam ! Clean residual mean=-0.000006 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.146051 Jy ! Adding 76 model components to the UV plane model. ! The established model now contains 124 components and 0.146051 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.129 mas, bmaj=6.299 mas, bpa=-0.2036 degrees ! Estimated noise=738.249 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000317595 Jy ! Component: 100 - total flux cleaned = -0.000525092 Jy ! Component: 150 - total flux cleaned = -0.000814493 Jy ! Component: 200 - total flux cleaned = -0.00103759 Jy ! Total flux subtracted in 200 components = -0.00103759 Jy ! Clean residual min=-0.001901 max=0.001666 Jy/beam ! Clean residual mean=-0.000003 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.145014 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 144 components and 0.145014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072826Jy sigma=0.000896 ! Fit after self-cal, rms=0.072824Jy sigma=0.000896 wmodel J2116+0536_S_2014_01_04_pus_map.mod ! Writing 144 model components to file: J2116+0536_S_2014_01_04_pus_map.mod wobs J2116+0536_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J2116+0536_S_2014_01_04_pus_uvs.fits wwins J2116+0536_S_2014_01_04_pus_map.win ! wwins: Wrote 4 windows to J2116+0536_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000854851 Jy ! Component: 100 - total flux cleaned = -0.00132018 Jy ! Component: 150 - total flux cleaned = -0.00161324 Jy ! Component: 200 - total flux cleaned = -0.00175299 Jy ! Component: 250 - total flux cleaned = -0.00177957 Jy ! Component: 300 - total flux cleaned = -0.00183126 Jy ! Component: 350 - total flux cleaned = -0.00188168 Jy ! Component: 400 - total flux cleaned = -0.00193152 Jy ! Component: 450 - total flux cleaned = -0.0020515 Jy ! Component: 500 - total flux cleaned = -0.00209838 Jy ! Component: 550 - total flux cleaned = -0.00214458 Jy ! Component: 600 - total flux cleaned = -0.00225654 Jy ! Component: 650 - total flux cleaned = -0.00227861 Jy ! Component: 700 - total flux cleaned = -0.00227905 Jy ! Component: 750 - total flux cleaned = -0.00227936 Jy ! Component: 800 - total flux cleaned = -0.00221805 Jy ! Component: 850 - total flux cleaned = -0.00227909 Jy ! Component: 900 - total flux cleaned = -0.00221914 Jy ! Component: 950 - total flux cleaned = -0.00219959 Jy ! Component: 1000 - total flux cleaned = -0.00219912 Jy ! Component: 1050 - total flux cleaned = -0.00208596 Jy ! Component: 1100 - total flux cleaned = -0.00206746 Jy ! Component: 1150 - total flux cleaned = -0.00206716 Jy ! Component: 1200 - total flux cleaned = -0.00204895 Jy ! Component: 1250 - total flux cleaned = -0.00203129 Jy ! Component: 1300 - total flux cleaned = -0.00203111 Jy ! Component: 1350 - total flux cleaned = -0.00201394 Jy ! Component: 1400 - total flux cleaned = -0.00199697 Jy ! Component: 1450 - total flux cleaned = -0.00209682 Jy ! Component: 1500 - total flux cleaned = -0.00201426 Jy ! Component: 1550 - total flux cleaned = -0.00203054 Jy ! Component: 1600 - total flux cleaned = -0.00201419 Jy ! Component: 1650 - total flux cleaned = -0.00201403 Jy ! Component: 1700 - total flux cleaned = -0.00201389 Jy ! Component: 1750 - total flux cleaned = -0.00202934 Jy ! Component: 1800 - total flux cleaned = -0.00201434 Jy ! Component: 1850 - total flux cleaned = -0.0020746 Jy ! Component: 1900 - total flux cleaned = -0.00207454 Jy ! Component: 1950 - total flux cleaned = -0.0021185 Jy ! Component: 2000 - total flux cleaned = -0.00217644 Jy ! Component: 2050 - total flux cleaned = -0.00219072 Jy ! Component: 2100 - total flux cleaned = -0.00221923 Jy ! Component: 2150 - total flux cleaned = -0.00228932 Jy ! Component: 2200 - total flux cleaned = -0.00230314 Jy ! Component: 2250 - total flux cleaned = -0.00231695 Jy ! Component: 2300 - total flux cleaned = -0.00238483 Jy ! Component: 2350 - total flux cleaned = -0.00238484 Jy ! Component: 2400 - total flux cleaned = -0.00243813 Jy ! Component: 2450 - total flux cleaned = -0.00245142 Jy ! Component: 2500 - total flux cleaned = -0.00255585 Jy ! Component: 2550 - total flux cleaned = -0.00258148 Jy ! Component: 2600 - total flux cleaned = -0.00259439 Jy ! Component: 2650 - total flux cleaned = -0.00267064 Jy ! Component: 2700 - total flux cleaned = -0.00270845 Jy ! Component: 2750 - total flux cleaned = -0.00274582 Jy ! Component: 2800 - total flux cleaned = -0.00280763 Jy ! Component: 2850 - total flux cleaned = -0.00286891 Jy ! Component: 2900 - total flux cleaned = -0.00292975 Jy ! Component: 2950 - total flux cleaned = -0.00295394 Jy ! Component: 3000 - total flux cleaned = -0.00299001 Jy ! Component: 3050 - total flux cleaned = -0.00306118 Jy ! Component: 3100 - total flux cleaned = -0.00313175 Jy ! Component: 3150 - total flux cleaned = -0.00315513 Jy ! Component: 3200 - total flux cleaned = -0.00321314 Jy ! Component: 3250 - total flux cleaned = -0.00321323 Jy ! Component: 3300 - total flux cleaned = -0.00330476 Jy ! Component: 3350 - total flux cleaned = -0.00331619 Jy ! Component: 3400 - total flux cleaned = -0.00336125 Jy ! Component: 3450 - total flux cleaned = -0.00339474 Jy ! Component: 3500 - total flux cleaned = -0.00342822 Jy ! Component: 3550 - total flux cleaned = -0.00347231 Jy ! Component: 3600 - total flux cleaned = -0.00351605 Jy ! Component: 3650 - total flux cleaned = -0.00359207 Jy ! Component: 3700 - total flux cleaned = -0.00362448 Jy ! Component: 3750 - total flux cleaned = -0.00367825 Jy ! Component: 3800 - total flux cleaned = -0.00372094 Jy ! Component: 3850 - total flux cleaned = -0.00375268 Jy ! Component: 3900 - total flux cleaned = -0.0038159 Jy ! Component: 3950 - total flux cleaned = -0.00386818 Jy ! Component: 4000 - total flux cleaned = -0.00390983 Jy ! Component: 4050 - total flux cleaned = -0.00397185 Jy ! Total flux subtracted in 4096 components = -0.00401299 Jy ! Clean residual min=-0.000691 max=0.000584 Jy/beam ! Clean residual mean=-0.000001 rms=0.000173 Jy/beam ! Combined flux in latest and established models = 0.141001 Jy keep ! Adding 238 model components to the UV plane model. ! The established model now contains 382 components and 0.141001 Jy ![Exited script file: muppet] wmap "J2116+0536_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.129 x 6.299 at -0.2036 degrees (North through East) ! Clean map min=-0.0016352 max=0.13572 Jy/beam ! Writing clean map to FITS file: J2116+0536_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.135724 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000167008 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.369148 0.369148 0.738296 1.47659 2.95318 5.90636 11.8127 23.6255 47.2509 94.5018 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.135 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.129 x 6.299 at -0.2036 degrees (North through East) ! Clean map min=-0.0016352 max=0.13572 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2116+0536_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:36:19 2017