! Started logfile: J2101+0341_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:36:01 2017 obs J2101+0341_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J2101+0341_S_2014_01_04_pus_uva.fits ! AN table 1: 49 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.334467 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2101+0341 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 2360 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2101+0341_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 176 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 176 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 176 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 176 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.775305Jy sigma=0.010068 ! Fit after self-cal, rms=0.442343Jy sigma=0.006048 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.646 mas, bmaj=5.664 mas, bpa=5.834 degrees ! Estimated noise=1526.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.445432 Jy ! Component: 100 - total flux cleaned = 0.551252 Jy ! Total flux subtracted in 100 components = 0.551252 Jy ! Clean residual min=-0.030205 max=0.040676 Jy/beam ! Clean residual mean=-0.000025 rms=0.009311 Jy/beam ! Combined flux in latest and established models = 0.551252 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.551252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122114Jy sigma=0.001374 ! Fit after self-cal, rms=0.122086Jy sigma=0.001373 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.365 mas, bmaj=6.72 mas, bpa=-7.159 degrees ! Estimated noise=1163.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0362462 Jy ! Component: 100 - total flux cleaned = 0.0517138 Jy ! Component: 150 - total flux cleaned = 0.054372 Jy ! Component: 200 - total flux cleaned = 0.0560055 Jy ! Total flux subtracted in 200 components = 0.0560055 Jy ! Clean residual min=-0.023855 max=0.036184 Jy/beam ! Clean residual mean=-0.000031 rms=0.007726 Jy/beam ! Combined flux in latest and established models = 0.607258 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 16 components and 0.607258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106983Jy sigma=0.001297 ! Fit after self-cal, rms=0.106882Jy sigma=0.001296 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* KP 1.00* LA 1.02 ! MK 0.99 NL 0.95 OV 0.96 PT 1.00* ! SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* KP 1.00* LA 0.99 ! MK 0.99 NL 1.03 OV 0.97 PT 1.00* ! SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* KP 1.00* LA 0.81 ! MK 1.04 NL 0.96 OV 0.92 PT 1.00* ! SC 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.00* KP 1.00* LA 0.87 ! MK 0.99 NL 1.07 OV 0.97 PT 1.00* ! SC 0.90 ! ! ! Fit before self-cal, rms=0.106882Jy sigma=0.001296 ! Fit after self-cal, rms=0.077611Jy sigma=0.000955 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.337 mas, bmaj=6.742 mas, bpa=-6.065 degrees ! Estimated noise=1160.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000548054 Jy ! Component: 100 - total flux cleaned = -0.000677167 Jy ! Component: 150 - total flux cleaned = -0.000793389 Jy ! Component: 200 - total flux cleaned = -0.000845232 Jy ! Total flux subtracted in 200 components = -0.000845232 Jy ! Clean residual min=-0.004064 max=0.004524 Jy/beam ! Clean residual mean=-0.000001 rms=0.001048 Jy/beam ! Combined flux in latest and established models = 0.606413 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 28 components and 0.606413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077448Jy sigma=0.000954 ! Fit after self-cal, rms=0.077031Jy sigma=0.000953 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077031Jy sigma=0.000953 ! Fit after self-cal, rms=0.077008Jy sigma=0.000953 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.337 mas, bmaj=6.746 mas, bpa=-6.087 degrees ! Estimated noise=1160.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000293664 Jy ! Component: 100 - total flux cleaned = -0.000569898 Jy ! Component: 150 - total flux cleaned = -0.000663779 Jy ! Component: 200 - total flux cleaned = -0.000787078 Jy ! Total flux subtracted in 200 components = -0.000787078 Jy ! Clean residual min=-0.003760 max=0.003856 Jy/beam ! Clean residual mean=-0.000001 rms=0.000939 Jy/beam ! Combined flux in latest and established models = 0.605626 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 32 components and 0.605626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076924Jy sigma=0.000952 ! Fit after self-cal, rms=0.076906Jy sigma=0.000952 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, -39.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151546 Jy ! Component: 100 - total flux cleaned = 0.0017472 Jy ! Component: 150 - total flux cleaned = 0.00196721 Jy ! Component: 200 - total flux cleaned = 0.0021897 Jy ! Total flux subtracted in 200 components = 0.0021897 Jy ! Clean residual min=-0.002855 max=0.002631 Jy/beam ! Clean residual mean=-0.000000 rms=0.000690 Jy/beam ! Combined flux in latest and established models = 0.607816 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 51 components and 0.607815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076714Jy sigma=0.000950 ! Fit after self-cal, rms=0.076716Jy sigma=0.000950 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076716Jy sigma=0.000950 ! Fit after self-cal, rms=0.076665Jy sigma=0.000950 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.337 mas, bmaj=6.749 mas, bpa=-6.126 degrees ! Estimated noise=1159.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000265013 Jy ! Component: 100 - total flux cleaned = 0.000370928 Jy ! Component: 150 - total flux cleaned = 0.00040166 Jy ! Component: 200 - total flux cleaned = 0.000481048 Jy ! Total flux subtracted in 200 components = 0.000481048 Jy ! Clean residual min=-0.002642 max=0.002669 Jy/beam ! Clean residual mean=-0.000000 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.608297 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 68 components and 0.608296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076637Jy sigma=0.000950 ! Fit after self-cal, rms=0.076641Jy sigma=0.000950 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.24192e-05 Jy ! Component: 100 - total flux cleaned = 3.48526e-05 Jy ! Component: 150 - total flux cleaned = 1.21734e-05 Jy ! Component: 200 - total flux cleaned = 5.53272e-05 Jy ! Total flux subtracted in 200 components = 5.53272e-05 Jy ! Clean residual min=-0.002543 max=0.002653 Jy/beam ! Clean residual mean=-0.000000 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.608352 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 72 components and 0.608352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076625Jy sigma=0.000950 ! Fit after self-cal, rms=0.076625Jy sigma=0.000950 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076625Jy sigma=0.000950 ! Fit after self-cal, rms=0.076615Jy sigma=0.000950 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.833 mas, bmaj=11.05 mas, bpa=-8.688 degrees ! Estimated noise=1365.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000163862 Jy ! Component: 100 - total flux cleaned = 0.000312016 Jy ! Component: 150 - total flux cleaned = 0.000313921 Jy ! Component: 200 - total flux cleaned = 0.000242439 Jy ! Total flux subtracted in 200 components = 0.000242439 Jy ! Clean residual min=-0.001792 max=0.001886 Jy/beam ! Clean residual mean=-0.000000 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.608594 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 78 components and 0.608594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076613Jy sigma=0.000950 ! Fit after self-cal, rms=0.076610Jy sigma=0.000950 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.39305e-05 Jy ! Component: 100 - total flux cleaned = 3.37015e-05 Jy ! Component: 150 - total flux cleaned = 2.53251e-07 Jy ! Component: 200 - total flux cleaned = -4.12248e-05 Jy ! Total flux subtracted in 200 components = -4.12248e-05 Jy ! Clean residual min=-0.001791 max=0.001829 Jy/beam ! Clean residual mean=-0.000000 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.608553 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 83 components and 0.608553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076610Jy sigma=0.000950 ! Fit after self-cal, rms=0.076609Jy sigma=0.000950 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.338 mas, bmaj=6.749 mas, bpa=-6.123 degrees ! Estimated noise=1159.45 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.338 x 6.749 at -6.123 degrees (North through East) ! Clean map min=-0.0023374 max=0.55768 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076609Jy sigma=0.000950 ! Fit after self-cal, rms=0.066539Jy sigma=0.000757 ! Inverting map and beam ! Estimated beam: bmin=3.339 mas, bmaj=6.75 mas, bpa=-6.165 degrees ! Estimated noise=1159.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00015028 Jy ! Component: 100 - total flux cleaned = 0.000124271 Jy ! Component: 150 - total flux cleaned = 1.15187e-05 Jy ! Component: 200 - total flux cleaned = -0.000109727 Jy ! Total flux subtracted in 200 components = -0.000109727 Jy ! Clean residual min=-0.002388 max=0.002505 Jy/beam ! Clean residual mean=-0.000000 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.608443 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 93 components and 0.608443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066507Jy sigma=0.000757 ! Fit after self-cal, rms=0.066503Jy sigma=0.000757 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000102401 Jy ! Component: 100 - total flux cleaned = -8.38767e-05 Jy ! Component: 150 - total flux cleaned = -6.68134e-05 Jy ! Component: 200 - total flux cleaned = -6.72757e-05 Jy ! Total flux subtracted in 200 components = -6.72757e-05 Jy ! Clean residual min=-0.002365 max=0.002483 Jy/beam ! Clean residual mean=-0.000000 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.608376 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 100 components and 0.608376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066491Jy sigma=0.000757 ! Fit after self-cal, rms=0.066489Jy sigma=0.000757 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066489Jy sigma=0.000757 ! Fit after self-cal, rms=0.066549Jy sigma=0.000756 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.618 mas, bmaj=5.733 mas, bpa=6.42 degrees ! Estimated noise=1502.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.438214 Jy ! Component: 100 - total flux cleaned = 0.539905 Jy ! Component: 150 - total flux cleaned = 0.577496 Jy ! Component: 200 - total flux cleaned = 0.593172 Jy ! Total flux subtracted in 200 components = 0.593172 Jy ! Clean residual min=-0.006628 max=0.007188 Jy/beam ! Clean residual mean=-0.000003 rms=0.001729 Jy/beam ! Combined flux in latest and established models = 0.593172 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.593172 Jy ! Inverting map and beam ! Estimated beam: bmin=3.34 mas, bmaj=6.749 mas, bpa=-6.158 degrees ! Estimated noise=1159.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00735986 Jy ! Component: 100 - total flux cleaned = 0.0116573 Jy ! Component: 150 - total flux cleaned = 0.0133062 Jy ! Component: 200 - total flux cleaned = 0.0144304 Jy ! Total flux subtracted in 200 components = 0.0144304 Jy ! Clean residual min=-0.003093 max=0.003277 Jy/beam ! Clean residual mean=-0.000001 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.607602 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 27 components and 0.607602 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.836 mas, bmaj=11.04 mas, bpa=-8.685 degrees ! Estimated noise=1365.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000839205 Jy ! Component: 100 - total flux cleaned = 0.00126552 Jy ! Component: 150 - total flux cleaned = 0.00145335 Jy ! Component: 200 - total flux cleaned = 0.00153607 Jy ! Total flux subtracted in 200 components = 0.00153607 Jy ! Clean residual min=-0.001880 max=0.002034 Jy/beam ! Clean residual mean=-0.000000 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.609138 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.35189e-05 Jy ! Component: 100 - total flux cleaned = 4.538e-05 Jy ! Component: 150 - total flux cleaned = 6.49254e-05 Jy ! Component: 200 - total flux cleaned = 8.23978e-05 Jy ! Total flux subtracted in 200 components = 8.23978e-05 Jy ! Clean residual min=-0.001724 max=0.001909 Jy/beam ! Clean residual mean=-0.000000 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.60922 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 53 components and 0.609221 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.34 mas, bmaj=6.749 mas, bpa=-6.158 degrees ! Estimated noise=1159.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000164665 Jy ! Component: 100 - total flux cleaned = -0.000129555 Jy ! Component: 150 - total flux cleaned = -0.000514288 Jy ! Component: 200 - total flux cleaned = -0.000666581 Jy ! Total flux subtracted in 200 components = -0.000666581 Jy ! Clean residual min=-0.002620 max=0.002956 Jy/beam ! Clean residual mean=-0.000000 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.608554 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 66 components and 0.608554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066635Jy sigma=0.000757 ! Fit after self-cal, rms=0.066640Jy sigma=0.000757 wmodel J2101+0341_S_2014_01_04_pus_map.mod ! Writing 66 model components to file: J2101+0341_S_2014_01_04_pus_map.mod wobs J2101+0341_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J2101+0341_S_2014_01_04_pus_uvs.fits wwins J2101+0341_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J2101+0341_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000295707 Jy ! Component: 100 - total flux cleaned = -0.000468106 Jy ! Component: 150 - total flux cleaned = -0.000546885 Jy ! Component: 200 - total flux cleaned = -0.000803712 Jy ! Component: 250 - total flux cleaned = -0.00101284 Jy ! Component: 300 - total flux cleaned = -0.00127654 Jy ! Component: 350 - total flux cleaned = -0.00137055 Jy ! Component: 400 - total flux cleaned = -0.0014307 Jy ! Component: 450 - total flux cleaned = -0.00157645 Jy ! Component: 500 - total flux cleaned = -0.0017457 Jy ! Component: 550 - total flux cleaned = -0.0018276 Jy ! Component: 600 - total flux cleaned = -0.00204135 Jy ! Component: 650 - total flux cleaned = -0.00222317 Jy ! Component: 700 - total flux cleaned = -0.00242594 Jy ! Component: 750 - total flux cleaned = -0.00259887 Jy ! Component: 800 - total flux cleaned = -0.00274391 Jy ! Component: 850 - total flux cleaned = -0.00293327 Jy ! Component: 900 - total flux cleaned = -0.00311836 Jy ! Component: 950 - total flux cleaned = -0.00332286 Jy ! Component: 1000 - total flux cleaned = -0.00347902 Jy ! Component: 1050 - total flux cleaned = -0.00365456 Jy ! Component: 1100 - total flux cleaned = -0.00382714 Jy ! Component: 1150 - total flux cleaned = -0.00401828 Jy ! Component: 1200 - total flux cleaned = -0.00420606 Jy ! Component: 1250 - total flux cleaned = -0.00439081 Jy ! Component: 1300 - total flux cleaned = -0.00457248 Jy ! Component: 1350 - total flux cleaned = -0.0047313 Jy ! Component: 1400 - total flux cleaned = -0.00488788 Jy ! Component: 1450 - total flux cleaned = -0.00500374 Jy ! Component: 1500 - total flux cleaned = -0.00511811 Jy ! Component: 1550 - total flux cleaned = -0.00524971 Jy ! Component: 1600 - total flux cleaned = -0.00534276 Jy ! Component: 1650 - total flux cleaned = -0.00541653 Jy ! Component: 1700 - total flux cleaned = -0.00552615 Jy ! Component: 1750 - total flux cleaned = -0.00559859 Jy ! Component: 1800 - total flux cleaned = -0.00570646 Jy ! Component: 1850 - total flux cleaned = -0.00572436 Jy ! Component: 1900 - total flux cleaned = -0.00574215 Jy ! Component: 1950 - total flux cleaned = -0.0057774 Jy ! Component: 2000 - total flux cleaned = -0.00579499 Jy ! Component: 2050 - total flux cleaned = -0.00575979 Jy ! Component: 2100 - total flux cleaned = -0.00579502 Jy ! Component: 2150 - total flux cleaned = -0.00584782 Jy ! Component: 2200 - total flux cleaned = -0.00586538 Jy ! Component: 2250 - total flux cleaned = -0.00584784 Jy ! Component: 2300 - total flux cleaned = -0.00584795 Jy ! Component: 2350 - total flux cleaned = -0.00588329 Jy ! Component: 2400 - total flux cleaned = -0.00590097 Jy ! Component: 2450 - total flux cleaned = -0.0058654 Jy ! Component: 2500 - total flux cleaned = -0.0059187 Jy ! Component: 2550 - total flux cleaned = -0.0059009 Jy ! Component: 2600 - total flux cleaned = -0.00586495 Jy ! Component: 2650 - total flux cleaned = -0.00588298 Jy ! Component: 2700 - total flux cleaned = -0.00586493 Jy ! Component: 2750 - total flux cleaned = -0.00593767 Jy ! Component: 2800 - total flux cleaned = -0.00591946 Jy ! Component: 2850 - total flux cleaned = -0.00588251 Jy ! Component: 2900 - total flux cleaned = -0.00591932 Jy ! Component: 2950 - total flux cleaned = -0.00599377 Jy ! Component: 3000 - total flux cleaned = -0.00603123 Jy ! Component: 3050 - total flux cleaned = -0.00610668 Jy ! Component: 3100 - total flux cleaned = -0.00616381 Jy ! Component: 3150 - total flux cleaned = -0.0062022 Jy ! Component: 3200 - total flux cleaned = -0.00620225 Jy ! Component: 3250 - total flux cleaned = -0.00618239 Jy ! Component: 3300 - total flux cleaned = -0.00626147 Jy ! Component: 3350 - total flux cleaned = -0.00622171 Jy ! Component: 3400 - total flux cleaned = -0.00626211 Jy ! Component: 3450 - total flux cleaned = -0.00624176 Jy ! Component: 3500 - total flux cleaned = -0.00622108 Jy ! Component: 3550 - total flux cleaned = -0.0061999 Jy ! Component: 3600 - total flux cleaned = -0.00626295 Jy ! Component: 3650 - total flux cleaned = -0.00622053 Jy ! Component: 3700 - total flux cleaned = -0.00630628 Jy ! Component: 3750 - total flux cleaned = -0.00632809 Jy ! Component: 3800 - total flux cleaned = -0.00632796 Jy ! Component: 3850 - total flux cleaned = -0.0063278 Jy ! Component: 3900 - total flux cleaned = -0.00637263 Jy ! Component: 3950 - total flux cleaned = -0.00641819 Jy ! Component: 4000 - total flux cleaned = -0.00641845 Jy ! Component: 4050 - total flux cleaned = -0.00648838 Jy ! Total flux subtracted in 4096 components = -0.00648862 Jy ! Clean residual min=-0.001925 max=0.001425 Jy/beam ! Clean residual mean=0.000001 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.602065 Jy keep ! Adding 187 model components to the UV plane model. ! The established model now contains 253 components and 0.602065 Jy ![Exited script file: muppet] wmap "J2101+0341_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.34 x 6.749 at -6.158 degrees (North through East) ! Clean map min=-0.0019326 max=0.55842 Jy/beam ! Writing clean map to FITS file: J2101+0341_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.558421 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00044449 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.238793 0.238793 0.477586 0.955173 1.91035 3.82069 7.64138 15.2828 30.5655 61.1311 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.558 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.34 x 6.749 at -6.158 degrees (North through East) ! Clean map min=-0.0019326 max=0.55842 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2101+0341_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:36:05 2017