! Started logfile: J2049+1003_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:35:51 2017 obs J2049+1003_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J2049+1003_S_2014_01_04_pus_uva.fits ! AN table 1: 59 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.498588 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2049+1003 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 4236 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2049+1003_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 148 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 148 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 148 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 148 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.692382Jy sigma=0.010451 ! Fit after self-cal, rms=0.649748Jy sigma=0.009711 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.939 mas, bmaj=5.438 mas, bpa=0.9486 degrees ! Estimated noise=1194.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.264478 Jy ! Component: 100 - total flux cleaned = 0.337013 Jy ! Total flux subtracted in 100 components = 0.337013 Jy ! Clean residual min=-0.021542 max=0.035782 Jy/beam ! Clean residual mean=-0.000072 rms=0.006285 Jy/beam ! Combined flux in latest and established models = 0.337013 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.337013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125419Jy sigma=0.001565 ! Fit after self-cal, rms=0.124672Jy sigma=0.001559 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.32 mas, bmaj=6.143 mas, bpa=-0.384 degrees ! Estimated noise=804.817 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0438473 Jy ! Component: 100 - total flux cleaned = 0.0677709 Jy ! Component: 150 - total flux cleaned = 0.0838768 Jy ! Component: 200 - total flux cleaned = 0.0950498 Jy ! Total flux subtracted in 200 components = 0.0950498 Jy ! Clean residual min=-0.020252 max=0.031116 Jy/beam ! Clean residual mean=-0.000147 rms=0.006475 Jy/beam ! Combined flux in latest and established models = 0.432062 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 29 components and 0.432062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101359Jy sigma=0.001421 ! Fit after self-cal, rms=0.101117Jy sigma=0.001418 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* KP 1.00* LA 1.00 ! MK 0.98 NL 0.95 OV 0.91 PT 0.96 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.33 FD 1.00* KP 1.00* LA 0.98 ! MK 0.99 NL 1.03 OV 0.96 PT 0.89 ! SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.00* KP 1.00* LA 0.79 ! MK 1.01 NL 0.99 OV 0.89 PT 0.87 ! SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.00* KP 1.00* LA 0.85 ! MK 0.99 NL 1.05 OV 0.94 PT 0.97 ! SC 0.92 ! ! ! Fit before self-cal, rms=0.101117Jy sigma=0.001418 ! Fit after self-cal, rms=0.086591Jy sigma=0.001147 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.298 mas, bmaj=6.288 mas, bpa=-0.6193 degrees ! Estimated noise=808.811 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0036902 Jy ! Component: 100 - total flux cleaned = 0.00341964 Jy ! Component: 150 - total flux cleaned = 0.00341479 Jy ! Component: 200 - total flux cleaned = 0.00340841 Jy ! Total flux subtracted in 200 components = 0.00340841 Jy ! Clean residual min=-0.015481 max=0.014022 Jy/beam ! Clean residual mean=0.000032 rms=0.003542 Jy/beam ! Combined flux in latest and established models = 0.435471 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.435471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084806Jy sigma=0.001132 ! Fit after self-cal, rms=0.084070Jy sigma=0.001129 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084070Jy sigma=0.001129 ! Fit after self-cal, rms=0.078890Jy sigma=0.001010 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.288 mas, bmaj=6.261 mas, bpa=-0.8762 degrees ! Estimated noise=806.727 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00363189 Jy ! Component: 100 - total flux cleaned = 0.00350374 Jy ! Component: 150 - total flux cleaned = 0.00339201 Jy ! Component: 200 - total flux cleaned = 0.00329003 Jy ! Total flux subtracted in 200 components = 0.00329003 Jy ! Clean residual min=-0.005787 max=0.009985 Jy/beam ! Clean residual mean=-0.000023 rms=0.001535 Jy/beam ! Combined flux in latest and established models = 0.438761 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 46 components and 0.438761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078307Jy sigma=0.001005 ! Fit after self-cal, rms=0.078194Jy sigma=0.001004 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12.5, -24). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00668945 Jy ! Component: 100 - total flux cleaned = 0.0078027 Jy ! Component: 150 - total flux cleaned = 0.00715726 Jy ! Component: 200 - total flux cleaned = 0.0069268 Jy ! Total flux subtracted in 200 components = 0.0069268 Jy ! Clean residual min=-0.004983 max=0.007532 Jy/beam ! Clean residual mean=-0.000011 rms=0.001223 Jy/beam ! Combined flux in latest and established models = 0.445687 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 63 components and 0.445687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077036Jy sigma=0.000993 ! Fit after self-cal, rms=0.076974Jy sigma=0.000992 ! Inverting map ! Added new window around map position (27, 21). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00614168 Jy ! Component: 100 - total flux cleaned = 0.00819624 Jy ! Component: 150 - total flux cleaned = 0.00883545 Jy ! Component: 200 - total flux cleaned = 0.00920079 Jy ! Total flux subtracted in 200 components = 0.00920079 Jy ! Clean residual min=-0.003418 max=0.004450 Jy/beam ! Clean residual mean=-0.000003 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 0.454888 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 84 components and 0.454888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076307Jy sigma=0.000985 ! Fit after self-cal, rms=0.076275Jy sigma=0.000985 ! Inverting map ! Added new window around map position (5, -31.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233099 Jy ! Component: 100 - total flux cleaned = 0.00281226 Jy ! Component: 150 - total flux cleaned = 0.00341138 Jy ! Component: 200 - total flux cleaned = 0.00386902 Jy ! Total flux subtracted in 200 components = 0.00386902 Jy ! Clean residual min=-0.003199 max=0.003097 Jy/beam ! Clean residual mean=-0.000001 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.458757 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 106 components and 0.458757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075950Jy sigma=0.000982 ! Fit after self-cal, rms=0.075933Jy sigma=0.000982 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075933Jy sigma=0.000982 ! Fit after self-cal, rms=0.075811Jy sigma=0.000980 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.286 mas, bmaj=6.272 mas, bpa=-0.8399 degrees ! Estimated noise=807.335 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182717 Jy ! Component: 100 - total flux cleaned = 0.00241529 Jy ! Component: 150 - total flux cleaned = 0.00260239 Jy ! Component: 200 - total flux cleaned = 0.00277364 Jy ! Total flux subtracted in 200 components = 0.00277364 Jy ! Clean residual min=-0.002452 max=0.002464 Jy/beam ! Clean residual mean=0.000011 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.461531 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 128 components and 0.461531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075634Jy sigma=0.000979 ! Fit after self-cal, rms=0.075619Jy sigma=0.000979 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000683852 Jy ! Component: 100 - total flux cleaned = 0.000884055 Jy ! Component: 150 - total flux cleaned = 0.000930765 Jy ! Component: 200 - total flux cleaned = 0.000974998 Jy ! Total flux subtracted in 200 components = 0.000974998 Jy ! Clean residual min=-0.002367 max=0.002433 Jy/beam ! Clean residual mean=0.000012 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.462506 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 141 components and 0.462506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075546Jy sigma=0.000978 ! Fit after self-cal, rms=0.075547Jy sigma=0.000978 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075547Jy sigma=0.000978 ! Fit after self-cal, rms=0.075686Jy sigma=0.000978 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.011 mas, bmaj=10.81 mas, bpa=10.08 degrees ! Estimated noise=973.189 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118785 Jy ! Component: 100 - total flux cleaned = 0.00184837 Jy ! Component: 150 - total flux cleaned = 0.00218006 Jy ! Component: 200 - total flux cleaned = 0.00238188 Jy ! Total flux subtracted in 200 components = 0.00238188 Jy ! Clean residual min=-0.002498 max=0.002312 Jy/beam ! Clean residual mean=0.000035 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.464888 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 154 components and 0.464888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075647Jy sigma=0.000978 ! Fit after self-cal, rms=0.075638Jy sigma=0.000978 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000139528 Jy ! Component: 100 - total flux cleaned = 0.000165294 Jy ! Component: 150 - total flux cleaned = 0.000258311 Jy ! Component: 200 - total flux cleaned = 0.000345407 Jy ! Total flux subtracted in 200 components = 0.000345407 Jy ! Clean residual min=-0.002246 max=0.002196 Jy/beam ! Clean residual mean=0.000035 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.465233 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 162 components and 0.465233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075625Jy sigma=0.000978 ! Fit after self-cal, rms=0.075622Jy sigma=0.000978 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.286 mas, bmaj=6.274 mas, bpa=-0.82 degrees ! Estimated noise=808.796 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.286 x 6.274 at -0.82 degrees (North through East) ! Clean map min=-0.0022733 max=0.34375 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.893 mas, bmaj=5.533 mas, bpa=0.1442 degrees ! Estimated noise=1205.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.267287 Jy ! Component: 100 - total flux cleaned = 0.346227 Jy ! Component: 150 - total flux cleaned = 0.381552 Jy ! Component: 200 - total flux cleaned = 0.400267 Jy ! Total flux subtracted in 200 components = 0.400267 Jy ! Clean residual min=-0.008058 max=0.011536 Jy/beam ! Clean residual mean=-0.000020 rms=0.002280 Jy/beam ! Combined flux in latest and established models = 0.400267 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.400267 Jy ! Inverting map and beam ! Estimated beam: bmin=3.286 mas, bmaj=6.274 mas, bpa=-0.82 degrees ! Estimated noise=808.796 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156631 Jy ! Component: 100 - total flux cleaned = 0.0262709 Jy ! Component: 150 - total flux cleaned = 0.0339405 Jy ! Component: 200 - total flux cleaned = 0.0399325 Jy ! Total flux subtracted in 200 components = 0.0399325 Jy ! Clean residual min=-0.004217 max=0.006012 Jy/beam ! Clean residual mean=-0.000031 rms=0.001207 Jy/beam ! Combined flux in latest and established models = 0.4402 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 49 components and 0.4402 Jy ! Inverting map ! Added new window around map position (-30.5, 17.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00577167 Jy ! Component: 100 - total flux cleaned = 0.00927008 Jy ! Component: 150 - total flux cleaned = 0.0123208 Jy ! Component: 200 - total flux cleaned = 0.01472 Jy ! Total flux subtracted in 200 components = 0.01472 Jy ! Clean residual min=-0.003022 max=0.003389 Jy/beam ! Clean residual mean=-0.000005 rms=0.000814 Jy/beam ! Combined flux in latest and established models = 0.45492 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 72 components and 0.45492 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.011 mas, bmaj=10.81 mas, bpa=10.08 degrees ! Estimated noise=973.189 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00353807 Jy ! Component: 100 - total flux cleaned = 0.00565417 Jy ! Component: 150 - total flux cleaned = 0.00698794 Jy ! Component: 200 - total flux cleaned = 0.00781812 Jy ! Total flux subtracted in 200 components = 0.00781812 Jy ! Clean residual min=-0.002633 max=0.002262 Jy/beam ! Clean residual mean=0.000015 rms=0.000753 Jy/beam ! Combined flux in latest and established models = 0.462738 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000579949 Jy ! Component: 100 - total flux cleaned = 0.00093744 Jy ! Component: 150 - total flux cleaned = 0.0011933 Jy ! Component: 200 - total flux cleaned = 0.00136382 Jy ! Total flux subtracted in 200 components = 0.00136382 Jy ! Clean residual min=-0.002411 max=0.002080 Jy/beam ! Clean residual mean=0.000020 rms=0.000704 Jy/beam ! Combined flux in latest and established models = 0.464102 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 99 components and 0.464101 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.286 mas, bmaj=6.274 mas, bpa=-0.82 degrees ! Estimated noise=808.796 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000737971 Jy ! Component: 100 - total flux cleaned = 0.00082906 Jy ! Component: 150 - total flux cleaned = 0.000757107 Jy ! Component: 200 - total flux cleaned = 0.000627854 Jy ! Total flux subtracted in 200 components = 0.000627854 Jy ! Clean residual min=-0.002253 max=0.002272 Jy/beam ! Clean residual mean=0.000011 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.464729 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 122 components and 0.464729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075624Jy sigma=0.000978 ! Fit after self-cal, rms=0.075628Jy sigma=0.000978 wmodel J2049+1003_S_2014_01_04_pus_map.mod ! Writing 122 model components to file: J2049+1003_S_2014_01_04_pus_map.mod wobs J2049+1003_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J2049+1003_S_2014_01_04_pus_uvs.fits wwins J2049+1003_S_2014_01_04_pus_map.win ! wwins: Wrote 5 windows to J2049+1003_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000422999 Jy ! Component: 100 - total flux cleaned = 0.000465975 Jy ! Component: 150 - total flux cleaned = 0.000429189 Jy ! Component: 200 - total flux cleaned = 0.000213217 Jy ! Component: 250 - total flux cleaned = 7.50646e-05 Jy ! Component: 300 - total flux cleaned = -2.55354e-05 Jy ! Component: 350 - total flux cleaned = -2.6517e-05 Jy ! Component: 400 - total flux cleaned = -2.84244e-05 Jy ! Component: 450 - total flux cleaned = -0.000120123 Jy ! Component: 500 - total flux cleaned = -0.000119576 Jy ! Component: 550 - total flux cleaned = -6.08326e-05 Jy ! Component: 600 - total flux cleaned = 2.34027e-05 Jy ! Component: 650 - total flux cleaned = 5.02486e-05 Jy ! Component: 700 - total flux cleaned = 5.03079e-05 Jy ! Component: 750 - total flux cleaned = 0.000154671 Jy ! Component: 800 - total flux cleaned = 0.000205703 Jy ! Component: 850 - total flux cleaned = 0.000280676 Jy ! Component: 900 - total flux cleaned = 0.0003297 Jy ! Component: 950 - total flux cleaned = 0.000329841 Jy ! Component: 1000 - total flux cleaned = 0.000470148 Jy ! Component: 1050 - total flux cleaned = 0.000470178 Jy ! Component: 1100 - total flux cleaned = 0.000560146 Jy ! Component: 1150 - total flux cleaned = 0.000581929 Jy ! Component: 1200 - total flux cleaned = 0.00060355 Jy ! Component: 1250 - total flux cleaned = 0.000646115 Jy ! Component: 1300 - total flux cleaned = 0.000688234 Jy ! Component: 1350 - total flux cleaned = 0.000730036 Jy ! Component: 1400 - total flux cleaned = 0.00079162 Jy ! Component: 1450 - total flux cleaned = 0.000811698 Jy ! Component: 1500 - total flux cleaned = 0.000831868 Jy ! Component: 1550 - total flux cleaned = 0.000909721 Jy ! Component: 1600 - total flux cleaned = 0.000928809 Jy ! Component: 1650 - total flux cleaned = 0.000966781 Jy ! Component: 1700 - total flux cleaned = 0.00102282 Jy ! Component: 1750 - total flux cleaned = 0.0010596 Jy ! Component: 1800 - total flux cleaned = 0.00113221 Jy ! Component: 1850 - total flux cleaned = 0.00113235 Jy ! Component: 1900 - total flux cleaned = 0.00115009 Jy ! Component: 1950 - total flux cleaned = 0.00116769 Jy ! Component: 2000 - total flux cleaned = 0.00118511 Jy ! Component: 2050 - total flux cleaned = 0.00123614 Jy ! Component: 2100 - total flux cleaned = 0.00125276 Jy ! Component: 2150 - total flux cleaned = 0.00125294 Jy ! Component: 2200 - total flux cleaned = 0.0012693 Jy ! Component: 2250 - total flux cleaned = 0.00131769 Jy ! Component: 2300 - total flux cleaned = 0.00133364 Jy ! Component: 2350 - total flux cleaned = 0.00130187 Jy ! Component: 2400 - total flux cleaned = 0.00136462 Jy ! Component: 2450 - total flux cleaned = 0.00142656 Jy ! Component: 2500 - total flux cleaned = 0.00144191 Jy ! Component: 2550 - total flux cleaned = 0.0015027 Jy ! Component: 2600 - total flux cleaned = 0.00151771 Jy ! Component: 2650 - total flux cleaned = 0.00151773 Jy ! Component: 2700 - total flux cleaned = 0.00154737 Jy ! Component: 2750 - total flux cleaned = 0.00156197 Jy ! Component: 2800 - total flux cleaned = 0.00159111 Jy ! Component: 2850 - total flux cleaned = 0.00164895 Jy ! Component: 2900 - total flux cleaned = 0.00160588 Jy ! Component: 2950 - total flux cleaned = 0.00163455 Jy ! Component: 3000 - total flux cleaned = 0.00160609 Jy ! Component: 3050 - total flux cleaned = 0.00159206 Jy ! Component: 3100 - total flux cleaned = 0.00157807 Jy ! Component: 3150 - total flux cleaned = 0.00152245 Jy ! Component: 3200 - total flux cleaned = 0.00150868 Jy ! Component: 3250 - total flux cleaned = 0.00143999 Jy ! Component: 3300 - total flux cleaned = 0.00139904 Jy ! Component: 3350 - total flux cleaned = 0.0013583 Jy ! Component: 3400 - total flux cleaned = 0.00129066 Jy ! Component: 3450 - total flux cleaned = 0.00123683 Jy ! Component: 3500 - total flux cleaned = 0.00122343 Jy ! Component: 3550 - total flux cleaned = 0.00118337 Jy ! Component: 3600 - total flux cleaned = 0.00111687 Jy ! Component: 3650 - total flux cleaned = 0.00109039 Jy ! Component: 3700 - total flux cleaned = 0.00103776 Jy ! Component: 3750 - total flux cleaned = 0.00106402 Jy ! Component: 3800 - total flux cleaned = 0.00105097 Jy ! Component: 3850 - total flux cleaned = 0.00105092 Jy ! Component: 3900 - total flux cleaned = 0.00107694 Jy ! Component: 3950 - total flux cleaned = 0.00108988 Jy ! Component: 4000 - total flux cleaned = 0.00106402 Jy ! Component: 4050 - total flux cleaned = 0.00108975 Jy ! Total flux subtracted in 4096 components = 0.00110261 Jy ! Clean residual min=-0.000782 max=0.000784 Jy/beam ! Clean residual mean=0.000004 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.465832 Jy keep ! Adding 248 model components to the UV plane model. ! The established model now contains 369 components and 0.465832 Jy ![Exited script file: muppet] wmap "J2049+1003_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.286 x 6.274 at -0.82 degrees (North through East) ! Clean map min=-0.0020039 max=0.34727 Jy/beam ! Writing clean map to FITS file: J2049+1003_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.347272 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000203926 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.176167 0.176167 0.352334 0.704668 1.40934 2.81867 5.63734 11.2747 22.5494 45.0988 90.1975 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.347 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.286 x 6.274 at -0.82 degrees (North through East) ! Clean map min=-0.0020039 max=0.34727 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2049+1003_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:35:56 2017