! Started logfile: J2045-1858_S_2014_08_09_pus_uvs.log on Tue Nov 29 23:16:27 2016
obs J2045-1858_S_2014_08_09_pus_uva.fits
! Reading UV FITS file: J2045-1858_S_2014_08_09_pus_uva.fits
! AN table 1: 123 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.768022 visibilities/baseline/integration-bin.
! Found source: J2045-1858
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 342 lines of history.
! 
! Reading 17004 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J2045-1858_S_2014_08_09_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 152 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 152 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 152 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 152 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.904876Jy  sigma=0.008772
! Fit after  self-cal, rms=0.868705Jy  sigma=0.008406
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.214 mas, bmaj=10.97 mas, bpa=16.84 degrees
! Estimated noise=971.474 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.101349 Jy
! Component: 100  -  total flux cleaned = 0.123954 Jy
! Total flux subtracted in 100 components = 0.123954 Jy
! Clean residual min=-0.005028 max=0.008047 Jy/beam
! Clean residual mean=-0.000002 rms=0.001495 Jy/beam
! Combined flux in latest and established models = 0.123954 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.123954 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089027Jy  sigma=0.000807
! Fit after  self-cal, rms=0.089015Jy  sigma=0.000807
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.01 mas, bmaj=12.3 mas, bpa=15.49 degrees
! Estimated noise=568.829 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0134366 Jy
! Component: 100  -  total flux cleaned = 0.0197104 Jy
! Component: 150  -  total flux cleaned = 0.0232306 Jy
! Component: 200  -  total flux cleaned = 0.0254088 Jy
! Total flux subtracted in 200 components = 0.0254088 Jy
! Clean residual min=-0.003377 max=0.003764 Jy/beam
! Clean residual mean=-0.000004 rms=0.000865 Jy/beam
! Combined flux in latest and established models = 0.149363 Jy
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 57 components and 0.149363 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086992Jy  sigma=0.000790
! Fit after  self-cal, rms=0.086968Jy  sigma=0.000789
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.86     HN        0.99     KP        1.05     
!   LA        1.13     MK        1.00*    NL        1.00     OV        0.96     
!   PT        1.04     SC        1.00     
! 
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.08     KP        1.02     
!   LA        1.07     MK        1.00*    NL        1.02     OV        1.02     
!   PT        1.02     SC        1.04     
! 
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.18     HN        1.05     KP        0.88     
!   LA        0.84     MK        1.00*    NL        1.01     OV        0.94     
!   PT        1.01     SC        1.04     
! 
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.99     HN        1.02     KP        0.86     
!   LA        0.79     MK        1.00*    NL        1.08     OV        1.01     
!   PT        1.03     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.086968Jy  sigma=0.000789
! Fit after  self-cal, rms=0.083838Jy  sigma=0.000775
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.018 mas, bmaj=12.39 mas, bpa=15.59 degrees
! Estimated noise=566.619 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000594231 Jy
! Component: 100  -  total flux cleaned = -0.000671722 Jy
! Component: 150  -  total flux cleaned = -0.00069954 Jy
! Component: 200  -  total flux cleaned = -0.000752094 Jy
! Total flux subtracted in 200 components = -0.000752094 Jy
! Clean residual min=-0.002255 max=0.003067 Jy/beam
! Clean residual mean=-0.000004 rms=0.000649 Jy/beam
! Combined flux in latest and established models = 0.14861 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 69 components and 0.14861 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083804Jy  sigma=0.000775
! Fit after  self-cal, rms=0.083794Jy  sigma=0.000775
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083794Jy  sigma=0.000775
! Fit after  self-cal, rms=0.084320Jy  sigma=0.000774
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.027 mas, bmaj=12.36 mas, bpa=15.38 degrees
! Estimated noise=566.788 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000616959 Jy
! Component: 100  -  total flux cleaned = -0.000711271 Jy
! Component: 150  -  total flux cleaned = -0.000731175 Jy
! Component: 200  -  total flux cleaned = -0.00073064 Jy
! Total flux subtracted in 200 components = -0.00073064 Jy
! Clean residual min=-0.002175 max=0.002861 Jy/beam
! Clean residual mean=-0.000007 rms=0.000602 Jy/beam
! Combined flux in latest and established models = 0.14788 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 81 components and 0.14788 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084302Jy  sigma=0.000774
! Fit after  self-cal, rms=0.084310Jy  sigma=0.000774
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6, -63).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00274584 Jy
! Component: 100  -  total flux cleaned = 0.00420884 Jy
! Component: 150  -  total flux cleaned = 0.00468343 Jy
! Component: 200  -  total flux cleaned = 0.00499983 Jy
! Total flux subtracted in 200 components = 0.00499983 Jy
! Clean residual min=-0.001929 max=0.002215 Jy/beam
! Clean residual mean=-0.000006 rms=0.000511 Jy/beam
! Combined flux in latest and established models = 0.15288 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 117 components and 0.15288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084213Jy  sigma=0.000773
! Fit after  self-cal, rms=0.084205Jy  sigma=0.000773
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084205Jy  sigma=0.000773
! Fit after  self-cal, rms=0.084078Jy  sigma=0.000773
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.035 mas, bmaj=12.37 mas, bpa=15.35 degrees
! Estimated noise=565.039 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000584635 Jy
! Component: 100  -  total flux cleaned = 0.000709249 Jy
! Component: 150  -  total flux cleaned = 0.000760507 Jy
! Component: 200  -  total flux cleaned = 0.000805565 Jy
! Total flux subtracted in 200 components = 0.000805565 Jy
! Clean residual min=-0.001869 max=0.002168 Jy/beam
! Clean residual mean=-0.000005 rms=0.000485 Jy/beam
! Combined flux in latest and established models = 0.153685 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 133 components and 0.153685 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084058Jy  sigma=0.000773
! Fit after  self-cal, rms=0.084060Jy  sigma=0.000773
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (67.5, -112).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00173868 Jy
! Component: 100  -  total flux cleaned = 0.00170252 Jy
! Component: 150  -  total flux cleaned = 0.00173111 Jy
! Component: 200  -  total flux cleaned = 0.0018167 Jy
! Total flux subtracted in 200 components = 0.0018167 Jy
! Clean residual min=-0.001948 max=0.001798 Jy/beam
! Clean residual mean=-0.000005 rms=0.000451 Jy/beam
! Combined flux in latest and established models = 0.155502 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 164 components and 0.155502 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084010Jy  sigma=0.000772
! Fit after  self-cal, rms=0.084007Jy  sigma=0.000772
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084007Jy  sigma=0.000772
! Fit after  self-cal, rms=0.083858Jy  sigma=0.000772
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.058 mas, bmaj=17.34 mas, bpa=6.008 degrees
! Estimated noise=640.005 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000920022 Jy
! Component: 100  -  total flux cleaned = 0.00119923 Jy
! Component: 150  -  total flux cleaned = 0.00134264 Jy
! Component: 200  -  total flux cleaned = 0.00144833 Jy
! Total flux subtracted in 200 components = 0.00144833 Jy
! Clean residual min=-0.001858 max=0.001775 Jy/beam
! Clean residual mean=-0.000006 rms=0.000524 Jy/beam
! Combined flux in latest and established models = 0.15695 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 187 components and 0.15695 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083846Jy  sigma=0.000772
! Fit after  self-cal, rms=0.083844Jy  sigma=0.000772
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.3974e-05 Jy
! Component: 100  -  total flux cleaned = 0.000153089 Jy
! Component: 150  -  total flux cleaned = 0.000243231 Jy
! Component: 200  -  total flux cleaned = 0.000292501 Jy
! Total flux subtracted in 200 components = 0.000292501 Jy
! Clean residual min=-0.001827 max=0.001745 Jy/beam
! Clean residual mean=-0.000006 rms=0.000515 Jy/beam
! Combined flux in latest and established models = 0.157243 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 198 components and 0.157243 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083838Jy  sigma=0.000772
! Fit after  self-cal, rms=0.083837Jy  sigma=0.000772
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.039 mas, bmaj=12.38 mas, bpa=15.38 degrees
! Estimated noise=564.305 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.039 x 12.38 at 15.38 degrees (North through East)
! Clean map  min=-0.0017014  max=0.13201 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.22 mas, bmaj=10.96 mas, bpa=16.71 degrees
! Estimated noise=969.155 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.100989 Jy
! Component: 100  -  total flux cleaned = 0.12365 Jy
! Component: 150  -  total flux cleaned = 0.132837 Jy
! Component: 200  -  total flux cleaned = 0.137953 Jy
! Total flux subtracted in 200 components = 0.137953 Jy
! Clean residual min=-0.003460 max=0.003673 Jy/beam
! Clean residual mean=-0.000000 rms=0.000928 Jy/beam
! Combined flux in latest and established models = 0.137953 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.137953 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.039 mas, bmaj=12.38 mas, bpa=15.38 degrees
! Estimated noise=564.305 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00522569 Jy
! Component: 100  -  total flux cleaned = 0.00831296 Jy
! Component: 150  -  total flux cleaned = 0.0105761 Jy
! Component: 200  -  total flux cleaned = 0.0123908 Jy
! Total flux subtracted in 200 components = 0.0123908 Jy
! Clean residual min=-0.001923 max=0.002407 Jy/beam
! Clean residual mean=-0.000005 rms=0.000523 Jy/beam
! Combined flux in latest and established models = 0.150343 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 60 components and 0.150343 Jy
! Inverting map 
! Added new window around map position (-7, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00209289 Jy
! Component: 100  -  total flux cleaned = 0.00334307 Jy
! Component: 150  -  total flux cleaned = 0.00403663 Jy
! Component: 200  -  total flux cleaned = 0.00461338 Jy
! Total flux subtracted in 200 components = 0.00461338 Jy
! Clean residual min=-0.001761 max=0.001709 Jy/beam
! Clean residual mean=-0.000004 rms=0.000445 Jy/beam
! Combined flux in latest and established models = 0.154957 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 83 components and 0.154957 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.058 mas, bmaj=17.34 mas, bpa=6.008 degrees
! Estimated noise=640.005 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000878812 Jy
! Component: 100  -  total flux cleaned = 0.00131351 Jy
! Component: 150  -  total flux cleaned = 0.00162255 Jy
! Component: 200  -  total flux cleaned = 0.00181314 Jy
! Total flux subtracted in 200 components = 0.00181314 Jy
! Clean residual min=-0.001616 max=0.001800 Jy/beam
! Clean residual mean=-0.000007 rms=0.000504 Jy/beam
! Combined flux in latest and established models = 0.15677 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000172167 Jy
! Component: 100  -  total flux cleaned = 0.000306887 Jy
! Component: 150  -  total flux cleaned = 0.000390083 Jy
! Component: 200  -  total flux cleaned = 0.000466335 Jy
! Total flux subtracted in 200 components = 0.000466335 Jy
! Clean residual min=-0.001590 max=0.001670 Jy/beam
! Clean residual mean=-0.000007 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.157236 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 132 components and 0.157236 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.039 mas, bmaj=12.38 mas, bpa=15.38 degrees
! Estimated noise=564.305 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000402604 Jy
! Component: 100  -  total flux cleaned = -0.000372221 Jy
! Component: 150  -  total flux cleaned = -0.000345601 Jy
! Component: 200  -  total flux cleaned = -0.000371259 Jy
! Total flux subtracted in 200 components = -0.000371259 Jy
! Clean residual min=-0.001644 max=0.001587 Jy/beam
! Clean residual mean=-0.000004 rms=0.000403 Jy/beam
! Combined flux in latest and established models = 0.156865 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 154 components and 0.156865 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083817Jy  sigma=0.000772
! Fit after  self-cal, rms=0.083813Jy  sigma=0.000772
wmodel J2045-1858_S_2014_08_09_pus_map.mod
! Writing 154 model components to file: J2045-1858_S_2014_08_09_pus_map.mod
wobs J2045-1858_S_2014_08_09_pus_uvs.fits
! Writing UV FITS file: J2045-1858_S_2014_08_09_pus_uvs.fits
wwins J2045-1858_S_2014_08_09_pus_map.win
! wwins: Wrote 4 windows to J2045-1858_S_2014_08_09_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -5.05375e-05 Jy
! Component: 100  -  total flux cleaned = 2.46592e-05 Jy
! Component: 150  -  total flux cleaned = 0.0001436 Jy
! Component: 200  -  total flux cleaned = 0.000212192 Jy
! Component: 250  -  total flux cleaned = 0.000211772 Jy
! Component: 300  -  total flux cleaned = 0.000211408 Jy
! Component: 350  -  total flux cleaned = 0.000170457 Jy
! Component: 400  -  total flux cleaned = 0.000170027 Jy
! Component: 450  -  total flux cleaned = 0.000111974 Jy
! Component: 500  -  total flux cleaned = 9.34637e-05 Jy
! Component: 550  -  total flux cleaned = 1.97081e-05 Jy
! Component: 600  -  total flux cleaned = -1.677e-05 Jy
! Component: 650  -  total flux cleaned = -8.83565e-05 Jy
! Component: 700  -  total flux cleaned = -0.00019316 Jy
! Component: 750  -  total flux cleaned = -0.000244624 Jy
! Component: 800  -  total flux cleaned = -0.000311974 Jy
! Component: 850  -  total flux cleaned = -0.000345129 Jy
! Component: 900  -  total flux cleaned = -0.000393754 Jy
! Component: 950  -  total flux cleaned = -0.000425736 Jy
! Component: 1000  -  total flux cleaned = -0.00047292 Jy
! Component: 1050  -  total flux cleaned = -0.000565931 Jy
! Component: 1100  -  total flux cleaned = -0.000611776 Jy
! Component: 1150  -  total flux cleaned = -0.000671998 Jy
! Component: 1200  -  total flux cleaned = -0.000775723 Jy
! Component: 1250  -  total flux cleaned = -0.000819415 Jy
! Component: 1300  -  total flux cleaned = -0.000920187 Jy
! Component: 1350  -  total flux cleaned = -0.000991519 Jy
! Component: 1400  -  total flux cleaned = -0.00108993 Jy
! Component: 1450  -  total flux cleaned = -0.00117312 Jy
! Component: 1500  -  total flux cleaned = -0.001255 Jy
! Component: 1550  -  total flux cleaned = -0.00132255 Jy
! Component: 1600  -  total flux cleaned = -0.00137593 Jy
! Component: 1650  -  total flux cleaned = -0.00145473 Jy
! Component: 1700  -  total flux cleaned = -0.00153265 Jy
! Component: 1750  -  total flux cleaned = -0.0015713 Jy
! Component: 1800  -  total flux cleaned = -0.00162203 Jy
! Component: 1850  -  total flux cleaned = -0.00164714 Jy
! Component: 1900  -  total flux cleaned = -0.00165976 Jy
! Component: 1950  -  total flux cleaned = -0.00172115 Jy
! Component: 2000  -  total flux cleaned = -0.00169692 Jy
! Component: 2050  -  total flux cleaned = -0.00176913 Jy
! Component: 2100  -  total flux cleaned = -0.00180484 Jy
! Component: 2150  -  total flux cleaned = -0.00182837 Jy
! Component: 2200  -  total flux cleaned = -0.00186324 Jy
! Component: 2250  -  total flux cleaned = -0.00192063 Jy
! Component: 2300  -  total flux cleaned = -0.00193198 Jy
! Component: 2350  -  total flux cleaned = -0.00198838 Jy
! Component: 2400  -  total flux cleaned = -0.00202193 Jy
! Component: 2450  -  total flux cleaned = -0.00206636 Jy
! Component: 2500  -  total flux cleaned = -0.00209932 Jy
! Component: 2550  -  total flux cleaned = -0.00216461 Jy
! Component: 2600  -  total flux cleaned = -0.00217511 Jy
! Component: 2650  -  total flux cleaned = -0.00220721 Jy
! Component: 2700  -  total flux cleaned = -0.00222845 Jy
! Component: 2750  -  total flux cleaned = -0.00224937 Jy
! Component: 2800  -  total flux cleaned = -0.00224945 Jy
! Component: 2850  -  total flux cleaned = -0.00232179 Jy
! Component: 2900  -  total flux cleaned = -0.00232175 Jy
! Component: 2950  -  total flux cleaned = -0.00232171 Jy
! Component: 3000  -  total flux cleaned = -0.00239253 Jy
! Component: 3050  -  total flux cleaned = -0.00241261 Jy
! Component: 3100  -  total flux cleaned = -0.00247232 Jy
! Component: 3150  -  total flux cleaned = -0.00253138 Jy
! Component: 3200  -  total flux cleaned = -0.00251188 Jy
! Component: 3250  -  total flux cleaned = -0.00254107 Jy
! Component: 3300  -  total flux cleaned = -0.00258933 Jy
! Component: 3350  -  total flux cleaned = -0.00259885 Jy
! Component: 3400  -  total flux cleaned = -0.00263685 Jy
! Component: 3450  -  total flux cleaned = -0.0026746 Jy
! Component: 3500  -  total flux cleaned = -0.00272139 Jy
! Component: 3550  -  total flux cleaned = -0.00271228 Jy
! Component: 3600  -  total flux cleaned = -0.00275845 Jy
! Component: 3650  -  total flux cleaned = -0.0027951 Jy
! Component: 3700  -  total flux cleaned = -0.00281331 Jy
! Component: 3750  -  total flux cleaned = -0.00288545 Jy
! Component: 3800  -  total flux cleaned = -0.00288533 Jy
! Component: 3850  -  total flux cleaned = -0.00286758 Jy
! Component: 3900  -  total flux cleaned = -0.00291186 Jy
! Component: 3950  -  total flux cleaned = -0.00292941 Jy
! Component: 4000  -  total flux cleaned = -0.00289446 Jy
! Component: 4050  -  total flux cleaned = -0.00286857 Jy
! Total flux subtracted in 4096 components = -0.00290311 Jy
! Clean residual min=-0.000503 max=0.000486 Jy/beam
! Clean residual mean=-0.000003 rms=0.000167 Jy/beam
! Combined flux in latest and established models = 0.153962 Jy
keep
! Adding 254 model components to the UV plane model.
! The established model now contains 408 components and 0.153962 Jy
![Exited script file: muppet]
wmap "J2045-1858_S_2014_08_09_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.039 x 12.38 at 15.38 degrees (North through East)
! Clean map  min=-0.0012004  max=0.1321 Jy/beam
! Writing clean map to FITS file: J2045-1858_S_2014_08_09_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.132098 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000164987 
device "J2045-1858_S_2014_08_09_pus\_map.eps/VPS"
! Attempting to open device: 'J2045-1858_S_2014_08_09_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.374692 0.374692 0.749385 1.49877 2.99754 5.99508 11.9902 23.9803 47.9606 95.9212
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0004 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.132 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.039 x 12.38 at 15.38 degrees (North through East)
! Clean map  min=-0.0012004  max=0.1321 Jy/beam
quit
! Quitting program
! Log file J2045-1858_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 23:16:33 2016