! Started logfile: J2041-2718_S_2014_08_09_pus_uvs.log on Tue Nov 29 23:16:11 2016 obs J2041-2718_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J2041-2718_S_2014_08_09_pus_uva.fits ! AN table 1: 121 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.781451 visibilities/baseline/integration-bin. ! Found source: J2041-2718 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 17020 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2041-2718_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 139 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 139 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 139 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 139 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.975229Jy sigma=0.008442 ! Fit after self-cal, rms=0.927726Jy sigma=0.008064 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.154 mas, bmaj=14.32 mas, bpa=17.98 degrees ! Estimated noise=921.875 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0597475 Jy ! Component: 100 - total flux cleaned = 0.0727938 Jy ! Total flux subtracted in 100 components = 0.0727938 Jy ! Clean residual min=-0.003459 max=0.003864 Jy/beam ! Clean residual mean=-0.000016 rms=0.000909 Jy/beam ! Combined flux in latest and established models = 0.0727938 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0727938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097091Jy sigma=0.000771 ! Fit after self-cal, rms=0.096913Jy sigma=0.000770 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.859 mas, bmaj=15.65 mas, bpa=16.75 degrees ! Estimated noise=636.629 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00509935 Jy ! Component: 100 - total flux cleaned = 0.00767457 Jy ! Component: 150 - total flux cleaned = 0.00908896 Jy ! Component: 200 - total flux cleaned = 0.00995006 Jy ! Total flux subtracted in 200 components = 0.00995006 Jy ! Clean residual min=-0.002236 max=0.002021 Jy/beam ! Clean residual mean=-0.000005 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.0827439 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 58 components and 0.0827439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096639Jy sigma=0.000767 ! Fit after self-cal, rms=0.096674Jy sigma=0.000767 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.88 HN 1.02 KP 1.08 ! LA 1.11 MK 1.00* NL 0.93 OV 0.99 ! PT 1.07 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.03 HN 1.11 KP 0.99 ! LA 1.11 MK 1.00* NL 1.08 OV 1.01 ! PT 0.99 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.10 HN 1.10 KP 0.90 ! LA 0.82 MK 1.00* NL 0.98 OV 0.99 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 1.02 KP 0.87 ! LA 0.84 MK 1.00* NL 1.05 OV 1.00 ! PT 1.01 SC 1.00 ! ! ! Fit before self-cal, rms=0.096674Jy sigma=0.000767 ! Fit after self-cal, rms=0.096219Jy sigma=0.000764 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.876 mas, bmaj=15.8 mas, bpa=16.87 degrees ! Estimated noise=634.804 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00076262 Jy ! Component: 100 - total flux cleaned = -0.000880638 Jy ! Component: 150 - total flux cleaned = -0.000932291 Jy ! Component: 200 - total flux cleaned = -0.000964105 Jy ! Total flux subtracted in 200 components = -0.000964105 Jy ! Clean residual min=-0.001971 max=0.001760 Jy/beam ! Clean residual mean=-0.000009 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.0817798 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 78 components and 0.0817798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096209Jy sigma=0.000764 ! Fit after self-cal, rms=0.096232Jy sigma=0.000763 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096232Jy sigma=0.000763 ! Fit after self-cal, rms=0.097153Jy sigma=0.000763 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.882 mas, bmaj=15.82 mas, bpa=16.9 degrees ! Estimated noise=635.202 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000613098 Jy ! Component: 100 - total flux cleaned = -0.000692709 Jy ! Component: 150 - total flux cleaned = -0.000706394 Jy ! Component: 200 - total flux cleaned = -0.000706911 Jy ! Total flux subtracted in 200 components = -0.000706911 Jy ! Clean residual min=-0.001924 max=0.001704 Jy/beam ! Clean residual mean=-0.000010 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.0810729 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 95 components and 0.0810728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097148Jy sigma=0.000763 ! Fit after self-cal, rms=0.097166Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.14923e-05 Jy ! Component: 100 - total flux cleaned = -6.22777e-05 Jy ! Component: 150 - total flux cleaned = -6.24189e-05 Jy ! Component: 200 - total flux cleaned = -7.15353e-05 Jy ! Total flux subtracted in 200 components = -7.15353e-05 Jy ! Clean residual min=-0.001951 max=0.001721 Jy/beam ! Clean residual mean=-0.000010 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.0810013 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 102 components and 0.0810013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097163Jy sigma=0.000763 ! Fit after self-cal, rms=0.097163Jy sigma=0.000763 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097163Jy sigma=0.000763 ! Fit after self-cal, rms=0.098482Jy sigma=0.000763 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.884 mas, bmaj=15.81 mas, bpa=16.94 degrees ! Estimated noise=635.235 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000420687 Jy ! Component: 100 - total flux cleaned = -0.000490437 Jy ! Component: 150 - total flux cleaned = -0.000514121 Jy ! Component: 200 - total flux cleaned = -0.000534997 Jy ! Total flux subtracted in 200 components = -0.000534997 Jy ! Clean residual min=-0.001931 max=0.001716 Jy/beam ! Clean residual mean=-0.000011 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.0804663 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 119 components and 0.0804663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098478Jy sigma=0.000763 ! Fit after self-cal, rms=0.098502Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.96507e-05 Jy ! Component: 100 - total flux cleaned = -3.96881e-05 Jy ! Component: 150 - total flux cleaned = -3.97777e-05 Jy ! Component: 200 - total flux cleaned = -3.99187e-05 Jy ! Total flux subtracted in 200 components = -3.99187e-05 Jy ! Clean residual min=-0.001939 max=0.001723 Jy/beam ! Clean residual mean=-0.000011 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.0804264 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 133 components and 0.0804264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098500Jy sigma=0.000763 ! Fit after self-cal, rms=0.098498Jy sigma=0.000763 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098498Jy sigma=0.000763 ! Fit after self-cal, rms=0.098914Jy sigma=0.000763 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.152 mas, bmaj=22.85 mas, bpa=7.066 degrees ! Estimated noise=705.577 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000293978 Jy ! Component: 100 - total flux cleaned = -0.000317211 Jy ! Component: 150 - total flux cleaned = -0.000331834 Jy ! Component: 200 - total flux cleaned = -0.000352986 Jy ! Total flux subtracted in 200 components = -0.000352986 Jy ! Clean residual min=-0.001912 max=0.001842 Jy/beam ! Clean residual mean=-0.000018 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.0800734 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 140 components and 0.0800734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098912Jy sigma=0.000763 ! Fit after self-cal, rms=0.098920Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.55695e-05 Jy ! Component: 100 - total flux cleaned = -3.22981e-05 Jy ! Component: 150 - total flux cleaned = -3.21693e-05 Jy ! Component: 200 - total flux cleaned = -2.59168e-05 Jy ! Total flux subtracted in 200 components = -2.59168e-05 Jy ! Clean residual min=-0.001915 max=0.001841 Jy/beam ! Clean residual mean=-0.000018 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.0800475 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 141 components and 0.0800475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098919Jy sigma=0.000763 ! Fit after self-cal, rms=0.098918Jy sigma=0.000763 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.883 mas, bmaj=15.82 mas, bpa=17 degrees ! Estimated noise=634.39 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.883 x 15.82 at 17 degrees (North through East) ! Clean map min=-0.0019016 max=0.0761 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.161 mas, bmaj=14.41 mas, bpa=18.16 degrees ! Estimated noise=916.702 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0593602 Jy ! Component: 100 - total flux cleaned = 0.0723405 Jy ! Component: 150 - total flux cleaned = 0.075789 Jy ! Component: 200 - total flux cleaned = 0.0769615 Jy ! Total flux subtracted in 200 components = 0.0769615 Jy ! Clean residual min=-0.002873 max=0.002698 Jy/beam ! Clean residual mean=-0.000018 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.0769615 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.0769615 Jy ! Inverting map and beam ! Estimated beam: bmin=3.883 mas, bmaj=15.82 mas, bpa=17 degrees ! Estimated noise=634.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195893 Jy ! Component: 100 - total flux cleaned = 0.00261568 Jy ! Component: 150 - total flux cleaned = 0.00274201 Jy ! Component: 200 - total flux cleaned = 0.0028639 Jy ! Total flux subtracted in 200 components = 0.0028639 Jy ! Clean residual min=-0.001915 max=0.001696 Jy/beam ! Clean residual mean=-0.000012 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.0798254 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 63 components and 0.0798254 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.152 mas, bmaj=22.85 mas, bpa=7.066 degrees ! Estimated noise=705.577 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000349263 Jy ! Component: 100 - total flux cleaned = 0.000388873 Jy ! Component: 150 - total flux cleaned = 0.000380018 Jy ! Component: 200 - total flux cleaned = 0.000371602 Jy ! Total flux subtracted in 200 components = 0.000371602 Jy ! Clean residual min=-0.001913 max=0.001837 Jy/beam ! Clean residual mean=-0.000018 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.080197 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.83257e-06 Jy ! Component: 100 - total flux cleaned = -1.51149e-05 Jy ! Component: 150 - total flux cleaned = -2.21176e-05 Jy ! Component: 200 - total flux cleaned = -2.19432e-05 Jy ! Total flux subtracted in 200 components = -2.19432e-05 Jy ! Clean residual min=-0.001912 max=0.001839 Jy/beam ! Clean residual mean=-0.000018 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.080175 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 73 components and 0.080175 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.883 mas, bmaj=15.82 mas, bpa=17 degrees ! Estimated noise=634.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000102947 Jy ! Component: 100 - total flux cleaned = -0.000115661 Jy ! Component: 150 - total flux cleaned = -0.000138806 Jy ! Component: 200 - total flux cleaned = -0.000159612 Jy ! Total flux subtracted in 200 components = -0.000159612 Jy ! Clean residual min=-0.001924 max=0.001674 Jy/beam ! Clean residual mean=-0.000011 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.0800154 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 89 components and 0.0800154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098919Jy sigma=0.000763 ! Fit after self-cal, rms=0.098910Jy sigma=0.000763 wmodel J2041-2718_S_2014_08_09_pus_map.mod ! Writing 89 model components to file: J2041-2718_S_2014_08_09_pus_map.mod wobs J2041-2718_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J2041-2718_S_2014_08_09_pus_uvs.fits wwins J2041-2718_S_2014_08_09_pus_map.win ! wwins: Wrote 1 windows to J2041-2718_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00038485 Jy ! Component: 100 - total flux cleaned = -0.000268955 Jy ! Component: 150 - total flux cleaned = -0.000241657 Jy ! Component: 200 - total flux cleaned = -8.74632e-05 Jy ! Component: 250 - total flux cleaned = 8.57941e-05 Jy ! Component: 300 - total flux cleaned = 0.00010964 Jy ! Component: 350 - total flux cleaned = 0.000109338 Jy ! Component: 400 - total flux cleaned = 0.000131803 Jy ! Component: 450 - total flux cleaned = 0.000109486 Jy ! Component: 500 - total flux cleaned = 4.47991e-05 Jy ! Component: 550 - total flux cleaned = 2.35376e-05 Jy ! Component: 600 - total flux cleaned = -5.94452e-05 Jy ! Component: 650 - total flux cleaned = -3.94228e-05 Jy ! Component: 700 - total flux cleaned = -0.000100156 Jy ! Component: 750 - total flux cleaned = -0.000139302 Jy ! Component: 800 - total flux cleaned = -0.000158439 Jy ! Component: 850 - total flux cleaned = -0.000177311 Jy ! Component: 900 - total flux cleaned = -0.000214253 Jy ! Component: 950 - total flux cleaned = -0.00014045 Jy ! Component: 1000 - total flux cleaned = -0.000122404 Jy ! Component: 1050 - total flux cleaned = -6.90948e-05 Jy ! Component: 1100 - total flux cleaned = -5.17583e-05 Jy ! Component: 1150 - total flux cleaned = -0.000104091 Jy ! Component: 1200 - total flux cleaned = -5.26615e-05 Jy ! Component: 1250 - total flux cleaned = -1.9155e-05 Jy ! Component: 1300 - total flux cleaned = -3.59557e-05 Jy ! Component: 1350 - total flux cleaned = -3.62413e-05 Jy ! Component: 1400 - total flux cleaned = -6.87763e-05 Jy ! Component: 1450 - total flux cleaned = -8.46237e-05 Jy ! Component: 1500 - total flux cleaned = -0.000132205 Jy ! Component: 1550 - total flux cleaned = -0.000147894 Jy ! Component: 1600 - total flux cleaned = -0.000132188 Jy ! Component: 1650 - total flux cleaned = -0.00023954 Jy ! Component: 1700 - total flux cleaned = -0.000208869 Jy ! Component: 1750 - total flux cleaned = -0.000223926 Jy ! Component: 1800 - total flux cleaned = -0.000283486 Jy ! Component: 1850 - total flux cleaned = -0.000298158 Jy ! Component: 1900 - total flux cleaned = -0.000370753 Jy ! Component: 1950 - total flux cleaned = -0.000356398 Jy ! Component: 2000 - total flux cleaned = -0.000413321 Jy ! Component: 2050 - total flux cleaned = -0.00044146 Jy ! Component: 2100 - total flux cleaned = -0.000511139 Jy ! Component: 2150 - total flux cleaned = -0.000497228 Jy ! Component: 2200 - total flux cleaned = -0.000593051 Jy ! Component: 2250 - total flux cleaned = -0.000633825 Jy ! Component: 2300 - total flux cleaned = -0.000647364 Jy ! Component: 2350 - total flux cleaned = -0.000700586 Jy ! Component: 2400 - total flux cleaned = -0.000713817 Jy ! Component: 2450 - total flux cleaned = -0.000753296 Jy ! Component: 2500 - total flux cleaned = -0.000831042 Jy ! Component: 2550 - total flux cleaned = -0.000869478 Jy ! Component: 2600 - total flux cleaned = -0.000920428 Jy ! Component: 2650 - total flux cleaned = -0.000996061 Jy ! Component: 2700 - total flux cleaned = -0.0010584 Jy ! Component: 2750 - total flux cleaned = -0.00107076 Jy ! Component: 2800 - total flux cleaned = -0.00113217 Jy ! Component: 2850 - total flux cleaned = -0.0011809 Jy ! Component: 2900 - total flux cleaned = -0.00121701 Jy ! Component: 2950 - total flux cleaned = -0.00126495 Jy ! Component: 3000 - total flux cleaned = -0.00126493 Jy ! Component: 3050 - total flux cleaned = -0.00126491 Jy ! Component: 3100 - total flux cleaned = -0.00127655 Jy ! Component: 3150 - total flux cleaned = -0.00128813 Jy ! Component: 3200 - total flux cleaned = -0.00132274 Jy ! Component: 3250 - total flux cleaned = -0.00132264 Jy ! Component: 3300 - total flux cleaned = -0.00132272 Jy ! Component: 3350 - total flux cleaned = -0.00131155 Jy ! Component: 3400 - total flux cleaned = -0.00134513 Jy ! Component: 3450 - total flux cleaned = -0.00134511 Jy ! Component: 3500 - total flux cleaned = -0.00136718 Jy ! Component: 3550 - total flux cleaned = -0.00135607 Jy ! Component: 3600 - total flux cleaned = -0.00134522 Jy ! Component: 3650 - total flux cleaned = -0.00133449 Jy ! Component: 3700 - total flux cleaned = -0.00134522 Jy ! Component: 3750 - total flux cleaned = -0.00134517 Jy ! Component: 3800 - total flux cleaned = -0.00132392 Jy ! Component: 3850 - total flux cleaned = -0.00134498 Jy ! Component: 3900 - total flux cleaned = -0.00132408 Jy ! Component: 3950 - total flux cleaned = -0.00131383 Jy ! Component: 4000 - total flux cleaned = -0.00130352 Jy ! Component: 4050 - total flux cleaned = -0.00131376 Jy ! Total flux subtracted in 4096 components = -0.00127302 Jy ! Clean residual min=-0.000559 max=0.000566 Jy/beam ! Clean residual mean=-0.000004 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.0787424 Jy keep ! Adding 293 model components to the UV plane model. ! The established model now contains 382 components and 0.0787424 Jy ![Exited script file: muppet] wmap "J2041-2718_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.883 x 15.82 at 17 degrees (North through East) ! Clean map min=-0.0015725 max=0.076588 Jy/beam ! Writing clean map to FITS file: J2041-2718_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0765876 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000202196 device "J2041-2718_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J2041-2718_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.792016 0.792016 1.58403 3.16807 6.33613 12.6723 25.3445 50.689 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.076 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.883 x 15.82 at 17 degrees (North through East) ! Clean map min=-0.0015725 max=0.076588 Jy/beam quit ! Quitting program ! Log file J2041-2718_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 23:16:16 2016