! Started logfile: J2035+1056_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:35:46 2017 obs J2035+1056_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J2035+1056_S_2014_01_04_pus_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J2035+1056 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 4320 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2035+1056_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.885892Jy sigma=0.012208 ! Fit after self-cal, rms=0.871137Jy sigma=0.012039 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.756 mas, bmaj=5.623 mas, bpa=0.04529 degrees ! Estimated noise=1204.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0961551 Jy ! Component: 100 - total flux cleaned = 0.120711 Jy ! Total flux subtracted in 100 components = 0.120711 Jy ! Clean residual min=-0.009667 max=0.012612 Jy/beam ! Clean residual mean=-0.000161 rms=0.003310 Jy/beam ! Combined flux in latest and established models = 0.120711 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.120711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090756Jy sigma=0.001072 ! Fit after self-cal, rms=0.090794Jy sigma=0.001072 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.321 mas, bmaj=6.168 mas, bpa=-1.948 degrees ! Estimated noise=829.131 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190068 Jy ! Component: 100 - total flux cleaned = 0.0305854 Jy ! Component: 150 - total flux cleaned = 0.0382216 Jy ! Component: 200 - total flux cleaned = 0.0433178 Jy ! Total flux subtracted in 200 components = 0.0433178 Jy ! Clean residual min=-0.010437 max=0.016553 Jy/beam ! Clean residual mean=-0.000355 rms=0.003406 Jy/beam ! Combined flux in latest and established models = 0.164029 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 36 components and 0.164029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085965Jy sigma=0.001013 ! Fit after self-cal, rms=0.085936Jy sigma=0.001012 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* KP 1.00* LA 0.95 ! MK 1.04 NL 1.03 OV 0.96 PT 0.85 ! SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.00* KP 1.00* LA 0.96 ! MK 1.05 NL 1.07 OV 0.95 PT 0.89 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* KP 1.00* LA 0.76 ! MK 1.11 NL 1.04 OV 0.90 PT 0.85 ! SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.00* KP 1.00* LA 0.83 ! MK 1.04 NL 1.16 OV 1.04 PT 0.92 ! SC 0.94 ! ! ! Fit before self-cal, rms=0.085936Jy sigma=0.001012 ! Fit after self-cal, rms=0.081618Jy sigma=0.000975 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.37 mas, bmaj=6.335 mas, bpa=-1.005 degrees ! Estimated noise=830.148 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00098493 Jy ! Component: 100 - total flux cleaned = -0.00138821 Jy ! Component: 150 - total flux cleaned = -0.00164891 Jy ! Component: 200 - total flux cleaned = -0.00174044 Jy ! Total flux subtracted in 200 components = -0.00174044 Jy ! Clean residual min=-0.007796 max=0.013351 Jy/beam ! Clean residual mean=-0.000227 rms=0.002834 Jy/beam ! Combined flux in latest and established models = 0.162288 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 0.162289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081549Jy sigma=0.000973 ! Fit after self-cal, rms=0.081196Jy sigma=0.000972 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081196Jy sigma=0.000972 ! Fit after self-cal, rms=0.082215Jy sigma=0.000959 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.408 mas, bmaj=6.348 mas, bpa=-0.9311 degrees ! Estimated noise=835.614 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00174152 Jy ! Component: 100 - total flux cleaned = -0.00222528 Jy ! Component: 150 - total flux cleaned = -0.00264523 Jy ! Component: 200 - total flux cleaned = -0.00300978 Jy ! Total flux subtracted in 200 components = -0.00300978 Jy ! Clean residual min=-0.007102 max=0.011812 Jy/beam ! Clean residual mean=-0.000176 rms=0.002454 Jy/beam ! Combined flux in latest and established models = 0.159279 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 55 components and 0.159279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082090Jy sigma=0.000958 ! Fit after self-cal, rms=0.082189Jy sigma=0.000958 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105956 Jy ! Component: 100 - total flux cleaned = 0.0160689 Jy ! Component: 150 - total flux cleaned = 0.0199251 Jy ! Component: 200 - total flux cleaned = 0.0215705 Jy ! Total flux subtracted in 200 components = 0.0215705 Jy ! Clean residual min=-0.005954 max=0.007821 Jy/beam ! Clean residual mean=-0.000075 rms=0.001857 Jy/beam ! Combined flux in latest and established models = 0.180849 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 81 components and 0.180849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080743Jy sigma=0.000936 ! Fit after self-cal, rms=0.080580Jy sigma=0.000933 ! Inverting map ! Added new window around map position (8, -25.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00720686 Jy ! Component: 100 - total flux cleaned = 0.0109823 Jy ! Component: 150 - total flux cleaned = 0.0138831 Jy ! Component: 200 - total flux cleaned = 0.0162724 Jy ! Total flux subtracted in 200 components = 0.0162724 Jy ! Clean residual min=-0.004862 max=0.005109 Jy/beam ! Clean residual mean=-0.000024 rms=0.001397 Jy/beam ! Combined flux in latest and established models = 0.197122 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 108 components and 0.197122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079828Jy sigma=0.000922 ! Fit after self-cal, rms=0.079723Jy sigma=0.000921 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079723Jy sigma=0.000921 ! Fit after self-cal, rms=0.078809Jy sigma=0.000920 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.418 mas, bmaj=6.355 mas, bpa=-0.7968 degrees ! Estimated noise=827.294 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00312582 Jy ! Component: 100 - total flux cleaned = 0.00516819 Jy ! Component: 150 - total flux cleaned = 0.00662459 Jy ! Component: 200 - total flux cleaned = 0.00699533 Jy ! Total flux subtracted in 200 components = 0.00699533 Jy ! Clean residual min=-0.003997 max=0.004405 Jy/beam ! Clean residual mean=-0.000015 rms=0.001190 Jy/beam ! Combined flux in latest and established models = 0.204117 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 131 components and 0.204117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078642Jy sigma=0.000917 ! Fit after self-cal, rms=0.078598Jy sigma=0.000917 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000889533 Jy ! Component: 100 - total flux cleaned = 0.00157607 Jy ! Component: 150 - total flux cleaned = 0.00191162 Jy ! Component: 200 - total flux cleaned = 0.00213573 Jy ! Total flux subtracted in 200 components = 0.00213573 Jy ! Clean residual min=-0.003882 max=0.004501 Jy/beam ! Clean residual mean=-0.000007 rms=0.001158 Jy/beam ! Combined flux in latest and established models = 0.206253 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 143 components and 0.206253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078532Jy sigma=0.000916 ! Fit after self-cal, rms=0.078520Jy sigma=0.000916 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078520Jy sigma=0.000916 ! Fit after self-cal, rms=0.078382Jy sigma=0.000916 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.235 mas, bmaj=11 mas, bpa=12.52 degrees ! Estimated noise=945.402 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00208571 Jy ! Component: 100 - total flux cleaned = 0.0033237 Jy ! Component: 150 - total flux cleaned = 0.00393852 Jy ! Component: 200 - total flux cleaned = 0.0043932 Jy ! Total flux subtracted in 200 components = 0.0043932 Jy ! Clean residual min=-0.005413 max=0.005855 Jy/beam ! Clean residual mean=-0.000006 rms=0.001900 Jy/beam ! Combined flux in latest and established models = 0.210646 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 167 components and 0.210646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078372Jy sigma=0.000915 ! Fit after self-cal, rms=0.078357Jy sigma=0.000915 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000384681 Jy ! Component: 100 - total flux cleaned = 0.000687703 Jy ! Component: 150 - total flux cleaned = 0.000983343 Jy ! Component: 200 - total flux cleaned = 0.00122441 Jy ! Total flux subtracted in 200 components = 0.00122441 Jy ! Clean residual min=-0.005366 max=0.005807 Jy/beam ! Clean residual mean=0.000003 rms=0.001877 Jy/beam ! Combined flux in latest and established models = 0.21187 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 174 components and 0.21187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078355Jy sigma=0.000915 ! Fit after self-cal, rms=0.078359Jy sigma=0.000915 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.423 mas, bmaj=6.361 mas, bpa=-0.8038 degrees ! Estimated noise=826.205 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.423 x 6.361 at -0.8038 degrees (North through East) ! Clean map min=-0.0035083 max=0.12856 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.813 mas, bmaj=5.717 mas, bpa=1.126 degrees ! Estimated noise=1228.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0977776 Jy ! Component: 100 - total flux cleaned = 0.122071 Jy ! Component: 150 - total flux cleaned = 0.136238 Jy ! Component: 200 - total flux cleaned = 0.146773 Jy ! Total flux subtracted in 200 components = 0.146773 Jy ! Clean residual min=-0.007475 max=0.008406 Jy/beam ! Clean residual mean=-0.000097 rms=0.002120 Jy/beam ! Combined flux in latest and established models = 0.146773 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.146773 Jy ! Inverting map and beam ! Estimated beam: bmin=3.423 mas, bmaj=6.361 mas, bpa=-0.8038 degrees ! Estimated noise=826.205 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110671 Jy ! Component: 100 - total flux cleaned = 0.0185962 Jy ! Component: 150 - total flux cleaned = 0.024409 Jy ! Component: 200 - total flux cleaned = 0.0291591 Jy ! Total flux subtracted in 200 components = 0.0291591 Jy ! Clean residual min=-0.005101 max=0.004552 Jy/beam ! Clean residual mean=-0.000137 rms=0.001587 Jy/beam ! Combined flux in latest and established models = 0.175932 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 74 components and 0.175932 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.235 mas, bmaj=11 mas, bpa=12.52 degrees ! Estimated noise=945.402 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0070335 Jy ! Component: 100 - total flux cleaned = 0.0122454 Jy ! Component: 150 - total flux cleaned = 0.0163177 Jy ! Component: 200 - total flux cleaned = 0.0195827 Jy ! Total flux subtracted in 200 components = 0.0195827 Jy ! Clean residual min=-0.006709 max=0.005787 Jy/beam ! Clean residual mean=-0.000132 rms=0.002162 Jy/beam ! Combined flux in latest and established models = 0.195515 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267953 Jy ! Component: 100 - total flux cleaned = 0.00491155 Jy ! Component: 150 - total flux cleaned = 0.00679973 Jy ! Component: 200 - total flux cleaned = 0.00840372 Jy ! Total flux subtracted in 200 components = 0.00840372 Jy ! Clean residual min=-0.005992 max=0.005662 Jy/beam ! Clean residual mean=-0.000062 rms=0.001940 Jy/beam ! Combined flux in latest and established models = 0.203918 Jy ! Adding 122 model components to the UV plane model. ! The established model now contains 182 components and 0.203918 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.423 mas, bmaj=6.361 mas, bpa=-0.8038 degrees ! Estimated noise=826.205 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171596 Jy ! Component: 100 - total flux cleaned = 0.00219514 Jy ! Component: 150 - total flux cleaned = 0.00254807 Jy ! Component: 200 - total flux cleaned = 0.00295544 Jy ! Total flux subtracted in 200 components = 0.00295544 Jy ! Clean residual min=-0.003852 max=0.004027 Jy/beam ! Clean residual mean=-0.000017 rms=0.001098 Jy/beam ! Combined flux in latest and established models = 0.206874 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 201 components and 0.206874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078373Jy sigma=0.000915 ! Fit after self-cal, rms=0.078330Jy sigma=0.000915 wmodel J2035+1056_S_2014_01_04_pus_map.mod ! Writing 201 model components to file: J2035+1056_S_2014_01_04_pus_map.mod wobs J2035+1056_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J2035+1056_S_2014_01_04_pus_uvs.fits wwins J2035+1056_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J2035+1056_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000449308 Jy ! Component: 100 - total flux cleaned = 0.000385275 Jy ! Component: 150 - total flux cleaned = 0.000151382 Jy ! Component: 200 - total flux cleaned = -1.35305e-05 Jy ! Component: 250 - total flux cleaned = 3.76623e-05 Jy ! Component: 300 - total flux cleaned = 8.42086e-05 Jy ! Component: 350 - total flux cleaned = 8.41639e-05 Jy ! Component: 400 - total flux cleaned = -1.16319e-06 Jy ! Component: 450 - total flux cleaned = -0.000167636 Jy ! Component: 500 - total flux cleaned = -0.00028805 Jy ! Component: 550 - total flux cleaned = -0.000403076 Jy ! Component: 600 - total flux cleaned = -0.000662996 Jy ! Component: 650 - total flux cleaned = -0.00069855 Jy ! Component: 700 - total flux cleaned = -0.00073295 Jy ! Component: 750 - total flux cleaned = -0.000766413 Jy ! Component: 800 - total flux cleaned = -0.000766314 Jy ! Component: 850 - total flux cleaned = -0.000671182 Jy ! Component: 900 - total flux cleaned = -0.000640006 Jy ! Component: 950 - total flux cleaned = -0.000520364 Jy ! Component: 1000 - total flux cleaned = -0.000520453 Jy ! Component: 1050 - total flux cleaned = -0.000463151 Jy ! Component: 1100 - total flux cleaned = -0.000380807 Jy ! Component: 1150 - total flux cleaned = -0.000380541 Jy ! Component: 1200 - total flux cleaned = -0.000194461 Jy ! Component: 1250 - total flux cleaned = -0.000142944 Jy ! Component: 1300 - total flux cleaned = -9.15314e-05 Jy ! Component: 1350 - total flux cleaned = -0.000116351 Jy ! Component: 1400 - total flux cleaned = -0.000140384 Jy ! Component: 1450 - total flux cleaned = -6.81796e-05 Jy ! Component: 1500 - total flux cleaned = -0.000115177 Jy ! Component: 1550 - total flux cleaned = -0.000115145 Jy ! Component: 1600 - total flux cleaned = -0.000182646 Jy ! Component: 1650 - total flux cleaned = -0.000248961 Jy ! Component: 1700 - total flux cleaned = -0.000357379 Jy ! Component: 1750 - total flux cleaned = -0.000464655 Jy ! Component: 1800 - total flux cleaned = -0.000528155 Jy ! Component: 1850 - total flux cleaned = -0.000632019 Jy ! Component: 1900 - total flux cleaned = -0.000734086 Jy ! Component: 1950 - total flux cleaned = -0.000814598 Jy ! Component: 2000 - total flux cleaned = -0.000913569 Jy ! Component: 2050 - total flux cleaned = -0.000991518 Jy ! Component: 2100 - total flux cleaned = -0.00101106 Jy ! Component: 2150 - total flux cleaned = -0.00118139 Jy ! Component: 2200 - total flux cleaned = -0.00121876 Jy ! Component: 2250 - total flux cleaned = -0.00131079 Jy ! Component: 2300 - total flux cleaned = -0.00136529 Jy ! Component: 2350 - total flux cleaned = -0.00149072 Jy ! Component: 2400 - total flux cleaned = -0.00154397 Jy ! Component: 2450 - total flux cleaned = -0.00163141 Jy ! Component: 2500 - total flux cleaned = -0.00171787 Jy ! Component: 2550 - total flux cleaned = -0.0018204 Jy ! Component: 2600 - total flux cleaned = -0.0018372 Jy ! Component: 2650 - total flux cleaned = -0.00188741 Jy ! Component: 2700 - total flux cleaned = -0.0019205 Jy ! Component: 2750 - total flux cleaned = -0.00196997 Jy ! Component: 2800 - total flux cleaned = -0.0020189 Jy ! Component: 2850 - total flux cleaned = -0.00208366 Jy ! Component: 2900 - total flux cleaned = -0.00214786 Jy ! Component: 2950 - total flux cleaned = -0.00227503 Jy ! Component: 3000 - total flux cleaned = -0.00233811 Jy ! Component: 3050 - total flux cleaned = -0.00240086 Jy ! Component: 3100 - total flux cleaned = -0.00246332 Jy ! Component: 3150 - total flux cleaned = -0.00258749 Jy ! Component: 3200 - total flux cleaned = -0.00267988 Jy ! Component: 3250 - total flux cleaned = -0.00277172 Jy ! Component: 3300 - total flux cleaned = -0.00283255 Jy ! Component: 3350 - total flux cleaned = -0.00290839 Jy ! Component: 3400 - total flux cleaned = -0.00299871 Jy ! Component: 3450 - total flux cleaned = -0.00310335 Jy ! Component: 3500 - total flux cleaned = -0.00322234 Jy ! Component: 3550 - total flux cleaned = -0.00326675 Jy ! Component: 3600 - total flux cleaned = -0.00331099 Jy ! Component: 3650 - total flux cleaned = -0.00336963 Jy ! Component: 3700 - total flux cleaned = -0.0034426 Jy ! Component: 3750 - total flux cleaned = -0.00348636 Jy ! Component: 3800 - total flux cleaned = -0.00360206 Jy ! Component: 3850 - total flux cleaned = -0.00365963 Jy ! Component: 3900 - total flux cleaned = -0.00374558 Jy ! Component: 3950 - total flux cleaned = -0.00378843 Jy ! Component: 4000 - total flux cleaned = -0.0038311 Jy ! Component: 4050 - total flux cleaned = -0.00388777 Jy ! Total flux subtracted in 4096 components = -0.00397227 Jy ! Clean residual min=-0.001012 max=0.000878 Jy/beam ! Clean residual mean=-0.000004 rms=0.000232 Jy/beam ! Combined flux in latest and established models = 0.202901 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 478 components and 0.202902 Jy ![Exited script file: muppet] wmap "J2035+1056_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.423 x 6.361 at -0.8038 degrees (North through East) ! Clean map min=-0.0019601 max=0.13124 Jy/beam ! Writing clean map to FITS file: J2035+1056_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.13124 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000225895 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.516371 0.516371 1.03274 2.06548 4.13097 8.26194 16.5239 33.0478 66.0955 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.131 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.423 x 6.361 at -0.8038 degrees (North through East) ! Clean map min=-0.0019601 max=0.13124 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2035+1056_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:35:51 2017