! Started logfile: J2034+1154_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:35:41 2017 obs J2034+1154_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J2034+1154_S_2014_01_04_pus_uva.fits ! AN table 1: 98 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J2034+1154 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 7056 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2034+1154_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 245 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 245 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 245 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 245 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.943020Jy sigma=0.012889 ! Fit after self-cal, rms=0.919478Jy sigma=0.012620 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.861 mas, bmaj=5.556 mas, bpa=-3.41 degrees ! Estimated noise=934.521 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0636118 Jy ! Component: 100 - total flux cleaned = 0.0829173 Jy ! Total flux subtracted in 100 components = 0.0829173 Jy ! Clean residual min=-0.006999 max=0.008756 Jy/beam ! Clean residual mean=-0.000161 rms=0.002046 Jy/beam ! Combined flux in latest and established models = 0.0829172 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0829172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078073Jy sigma=0.000913 ! Fit after self-cal, rms=0.078108Jy sigma=0.000912 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.311 mas, bmaj=6.143 mas, bpa=-2.551 degrees ! Estimated noise=648.991 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105692 Jy ! Component: 100 - total flux cleaned = 0.0156459 Jy ! Component: 150 - total flux cleaned = 0.0185767 Jy ! Component: 200 - total flux cleaned = 0.0203358 Jy ! Total flux subtracted in 200 components = 0.0203358 Jy ! Clean residual min=-0.006420 max=0.007431 Jy/beam ! Clean residual mean=-0.000157 rms=0.001588 Jy/beam ! Combined flux in latest and established models = 0.103253 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 19 components and 0.103253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076647Jy sigma=0.000893 ! Fit after self-cal, rms=0.076654Jy sigma=0.000893 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* KP 1.00* LA 0.94 ! MK 1.04 NL 1.08 OV 1.06 PT 0.98 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* KP 1.00* LA 1.00 ! MK 0.95 NL 1.06 OV 1.06 PT 0.99 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* KP 1.00* LA 0.79 ! MK 0.99 NL 1.02 OV 0.99 PT 0.93 ! SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* KP 1.00* LA 0.84 ! MK 1.02 NL 1.24 OV 1.03 PT 0.94 ! SC 0.97 ! ! ! Fit before self-cal, rms=0.076654Jy sigma=0.000893 ! Fit after self-cal, rms=0.074726Jy sigma=0.000881 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.314 mas, bmaj=6.159 mas, bpa=-2.154 degrees ! Estimated noise=646.228 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00078284 Jy ! Component: 100 - total flux cleaned = 0.00100167 Jy ! Component: 150 - total flux cleaned = 0.00118692 Jy ! Component: 200 - total flux cleaned = 0.00129548 Jy ! Total flux subtracted in 200 components = 0.00129548 Jy ! Clean residual min=-0.004964 max=0.006925 Jy/beam ! Clean residual mean=-0.000108 rms=0.001373 Jy/beam ! Combined flux in latest and established models = 0.104549 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 26 components and 0.104549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074686Jy sigma=0.000880 ! Fit after self-cal, rms=0.074689Jy sigma=0.000880 ! Inverting map ! Added new window around map position (47.5, -8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00612097 Jy ! Component: 100 - total flux cleaned = 0.0096006 Jy ! Component: 150 - total flux cleaned = 0.0121654 Jy ! Component: 200 - total flux cleaned = 0.0142221 Jy ! Total flux subtracted in 200 components = 0.0142221 Jy ! Clean residual min=-0.003779 max=0.003072 Jy/beam ! Clean residual mean=-0.000049 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.118771 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 74 components and 0.118771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074160Jy sigma=0.000871 ! Fit after self-cal, rms=0.074059Jy sigma=0.000870 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074059Jy sigma=0.000870 ! Fit after self-cal, rms=0.072802Jy sigma=0.000868 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.32 mas, bmaj=6.199 mas, bpa=-1.897 degrees ! Estimated noise=639.171 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00228652 Jy ! Component: 100 - total flux cleaned = 0.00374546 Jy ! Component: 150 - total flux cleaned = 0.00425005 Jy ! Component: 200 - total flux cleaned = 0.00476973 Jy ! Total flux subtracted in 200 components = 0.00476973 Jy ! Clean residual min=-0.002807 max=0.002381 Jy/beam ! Clean residual mean=-0.000011 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.12354 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 101 components and 0.12354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072705Jy sigma=0.000866 ! Fit after self-cal, rms=0.072658Jy sigma=0.000866 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000708061 Jy ! Component: 100 - total flux cleaned = 0.00105656 Jy ! Component: 150 - total flux cleaned = 0.00147132 Jy ! Component: 200 - total flux cleaned = 0.00185296 Jy ! Total flux subtracted in 200 components = 0.00185296 Jy ! Clean residual min=-0.002672 max=0.002332 Jy/beam ! Clean residual mean=-0.000005 rms=0.000640 Jy/beam ! Combined flux in latest and established models = 0.125393 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 114 components and 0.125393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072616Jy sigma=0.000865 ! Fit after self-cal, rms=0.072600Jy sigma=0.000865 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072600Jy sigma=0.000865 ! Fit after self-cal, rms=0.072424Jy sigma=0.000865 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=6.209 mas, bpa=-1.765 degrees ! Estimated noise=638.957 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.56124e-05 Jy ! Component: 100 - total flux cleaned = 0.000277866 Jy ! Component: 150 - total flux cleaned = 0.000431725 Jy ! Component: 200 - total flux cleaned = 0.000600577 Jy ! Total flux subtracted in 200 components = 0.000600577 Jy ! Clean residual min=-0.002458 max=0.002265 Jy/beam ! Clean residual mean=-0.000003 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.125994 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 126 components and 0.125994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072386Jy sigma=0.000865 ! Fit after self-cal, rms=0.072362Jy sigma=0.000865 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.39421e-05 Jy ! Component: 100 - total flux cleaned = 0.000228358 Jy ! Component: 150 - total flux cleaned = 0.000400866 Jy ! Component: 200 - total flux cleaned = 0.000564059 Jy ! Total flux subtracted in 200 components = 0.000564059 Jy ! Clean residual min=-0.002360 max=0.002227 Jy/beam ! Clean residual mean=-0.000001 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.126558 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 131 components and 0.126558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072337Jy sigma=0.000865 ! Fit after self-cal, rms=0.072338Jy sigma=0.000865 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072338Jy sigma=0.000865 ! Fit after self-cal, rms=0.072141Jy sigma=0.000865 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.046 mas, bmaj=10.72 mas, bpa=12.54 degrees ! Estimated noise=763.936 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000950352 Jy ! Component: 100 - total flux cleaned = 0.00144486 Jy ! Component: 150 - total flux cleaned = 0.00177013 Jy ! Component: 200 - total flux cleaned = 0.00194041 Jy ! Total flux subtracted in 200 components = 0.00194041 Jy ! Clean residual min=-0.002403 max=0.002383 Jy/beam ! Clean residual mean=0.000013 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 0.128498 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 142 components and 0.128498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072134Jy sigma=0.000864 ! Fit after self-cal, rms=0.072111Jy sigma=0.000864 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00022827 Jy ! Component: 100 - total flux cleaned = 0.000361823 Jy ! Component: 150 - total flux cleaned = 0.000403682 Jy ! Component: 200 - total flux cleaned = 0.000463444 Jy ! Total flux subtracted in 200 components = 0.000463444 Jy ! Clean residual min=-0.002403 max=0.002334 Jy/beam ! Clean residual mean=0.000017 rms=0.000748 Jy/beam ! Combined flux in latest and established models = 0.128962 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 148 components and 0.128962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072109Jy sigma=0.000864 ! Fit after self-cal, rms=0.072107Jy sigma=0.000864 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.329 mas, bmaj=6.217 mas, bpa=-1.655 degrees ! Estimated noise=638.941 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.329 x 6.217 at -1.655 degrees (North through East) ! Clean map min=-0.0022526 max=0.082992 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.871 mas, bmaj=5.621 mas, bpa=-2.63 degrees ! Estimated noise=927.704 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0627007 Jy ! Component: 100 - total flux cleaned = 0.0826176 Jy ! Component: 150 - total flux cleaned = 0.0925723 Jy ! Component: 200 - total flux cleaned = 0.0990026 Jy ! Total flux subtracted in 200 components = 0.0990026 Jy ! Clean residual min=-0.004803 max=0.005733 Jy/beam ! Clean residual mean=-0.000094 rms=0.001345 Jy/beam ! Combined flux in latest and established models = 0.0990026 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0990026 Jy ! Inverting map and beam ! Estimated beam: bmin=3.329 mas, bmaj=6.217 mas, bpa=-1.655 degrees ! Estimated noise=638.941 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (19, 3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00614189 Jy ! Component: 100 - total flux cleaned = 0.010115 Jy ! Component: 150 - total flux cleaned = 0.0133228 Jy ! Component: 200 - total flux cleaned = 0.0160009 Jy ! Total flux subtracted in 200 components = 0.0160009 Jy ! Clean residual min=-0.003315 max=0.003089 Jy/beam ! Clean residual mean=-0.000047 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.115004 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 42 components and 0.115004 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.046 mas, bmaj=10.72 mas, bpa=12.54 degrees ! Estimated noise=763.936 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00362755 Jy ! Component: 100 - total flux cleaned = 0.00609663 Jy ! Component: 150 - total flux cleaned = 0.00768399 Jy ! Component: 200 - total flux cleaned = 0.00876721 Jy ! Total flux subtracted in 200 components = 0.00876721 Jy ! Clean residual min=-0.002887 max=0.003027 Jy/beam ! Clean residual mean=-0.000033 rms=0.000923 Jy/beam ! Combined flux in latest and established models = 0.123771 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000997811 Jy ! Component: 100 - total flux cleaned = 0.00181401 Jy ! Component: 150 - total flux cleaned = 0.00257693 Jy ! Component: 200 - total flux cleaned = 0.00317269 Jy ! Total flux subtracted in 200 components = 0.00317269 Jy ! Clean residual min=-0.002504 max=0.002841 Jy/beam ! Clean residual mean=-0.000007 rms=0.000812 Jy/beam ! Combined flux in latest and established models = 0.126943 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 95 components and 0.126943 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.329 mas, bmaj=6.217 mas, bpa=-1.655 degrees ! Estimated noise=638.941 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000141291 Jy ! Component: 100 - total flux cleaned = 0.000146116 Jy ! Component: 150 - total flux cleaned = 0.00029482 Jy ! Component: 200 - total flux cleaned = 0.00050799 Jy ! Total flux subtracted in 200 components = 0.00050799 Jy ! Clean residual min=-0.002471 max=0.002535 Jy/beam ! Clean residual mean=-0.000001 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.127451 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 116 components and 0.127451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072142Jy sigma=0.000865 ! Fit after self-cal, rms=0.072152Jy sigma=0.000865 wmodel J2034+1154_S_2014_01_04_pus_map.mod ! Writing 116 model components to file: J2034+1154_S_2014_01_04_pus_map.mod wobs J2034+1154_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J2034+1154_S_2014_01_04_pus_uvs.fits wwins J2034+1154_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J2034+1154_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 9.32142e-05 Jy ! Component: 100 - total flux cleaned = 0.000209453 Jy ! Component: 150 - total flux cleaned = 0.000282023 Jy ! Component: 200 - total flux cleaned = 0.000315202 Jy ! Component: 250 - total flux cleaned = 0.000378872 Jy ! Component: 300 - total flux cleaned = 0.000499026 Jy ! Component: 350 - total flux cleaned = 0.0006135 Jy ! Component: 400 - total flux cleaned = 0.000667967 Jy ! Component: 450 - total flux cleaned = 0.000719907 Jy ! Component: 500 - total flux cleaned = 0.000770553 Jy ! Component: 550 - total flux cleaned = 0.000819813 Jy ! Component: 600 - total flux cleaned = 0.000844012 Jy ! Component: 650 - total flux cleaned = 0.000912609 Jy ! Component: 700 - total flux cleaned = 0.000956201 Jy ! Component: 750 - total flux cleaned = 0.000977891 Jy ! Component: 800 - total flux cleaned = 0.00099945 Jy ! Component: 850 - total flux cleaned = 0.00102022 Jy ! Component: 900 - total flux cleaned = 0.00106009 Jy ! Component: 950 - total flux cleaned = 0.00107914 Jy ! Component: 1000 - total flux cleaned = 0.00107939 Jy ! Component: 1050 - total flux cleaned = 0.00113452 Jy ! Component: 1100 - total flux cleaned = 0.00108041 Jy ! Component: 1150 - total flux cleaned = 0.00108016 Jy ! Component: 1200 - total flux cleaned = 0.00101131 Jy ! Component: 1250 - total flux cleaned = 0.0010116 Jy ! Component: 1300 - total flux cleaned = 0.00101172 Jy ! Component: 1350 - total flux cleaned = 0.000995869 Jy ! Component: 1400 - total flux cleaned = 0.00105859 Jy ! Component: 1450 - total flux cleaned = 0.00107402 Jy ! Component: 1500 - total flux cleaned = 0.00107373 Jy ! Component: 1550 - total flux cleaned = 0.00110317 Jy ! Component: 1600 - total flux cleaned = 0.00111759 Jy ! Component: 1650 - total flux cleaned = 0.00117477 Jy ! Component: 1700 - total flux cleaned = 0.00117473 Jy ! Component: 1750 - total flux cleaned = 0.00122943 Jy ! Component: 1800 - total flux cleaned = 0.00127009 Jy ! Component: 1850 - total flux cleaned = 0.00128331 Jy ! Component: 1900 - total flux cleaned = 0.00137461 Jy ! Component: 1950 - total flux cleaned = 0.00141302 Jy ! Component: 2000 - total flux cleaned = 0.00145085 Jy ! Component: 2050 - total flux cleaned = 0.00147581 Jy ! Component: 2100 - total flux cleaned = 0.00147585 Jy ! Component: 2150 - total flux cleaned = 0.00152363 Jy ! Component: 2200 - total flux cleaned = 0.00155892 Jy ! Component: 2250 - total flux cleaned = 0.00157023 Jy ! Component: 2300 - total flux cleaned = 0.00162709 Jy ! Component: 2350 - total flux cleaned = 0.00164938 Jy ! Component: 2400 - total flux cleaned = 0.00167138 Jy ! Component: 2450 - total flux cleaned = 0.00167134 Jy ! Component: 2500 - total flux cleaned = 0.00171435 Jy ! Component: 2550 - total flux cleaned = 0.00175648 Jy ! Component: 2600 - total flux cleaned = 0.00178771 Jy ! Component: 2650 - total flux cleaned = 0.00182863 Jy ! Component: 2700 - total flux cleaned = 0.00181852 Jy ! Component: 2750 - total flux cleaned = 0.00184842 Jy ! Component: 2800 - total flux cleaned = 0.00183851 Jy ! Component: 2850 - total flux cleaned = 0.00184831 Jy ! Component: 2900 - total flux cleaned = 0.00185802 Jy ! Component: 2950 - total flux cleaned = 0.00184857 Jy ! Component: 3000 - total flux cleaned = 0.00186728 Jy ! Component: 3050 - total flux cleaned = 0.0019042 Jy ! Component: 3100 - total flux cleaned = 0.00194071 Jy ! Component: 3150 - total flux cleaned = 0.0019588 Jy ! Component: 3200 - total flux cleaned = 0.0019766 Jy ! Component: 3250 - total flux cleaned = 0.00199436 Jy ! Component: 3300 - total flux cleaned = 0.00203822 Jy ! Component: 3350 - total flux cleaned = 0.00206432 Jy ! Component: 3400 - total flux cleaned = 0.00209008 Jy ! Component: 3450 - total flux cleaned = 0.00209861 Jy ! Component: 3500 - total flux cleaned = 0.00214087 Jy ! Component: 3550 - total flux cleaned = 0.00214087 Jy ! Component: 3600 - total flux cleaned = 0.00216573 Jy ! Component: 3650 - total flux cleaned = 0.00219041 Jy ! Component: 3700 - total flux cleaned = 0.00225563 Jy ! Component: 3750 - total flux cleaned = 0.00226374 Jy ! Component: 3800 - total flux cleaned = 0.00233604 Jy ! Component: 3850 - total flux cleaned = 0.00238384 Jy ! Component: 3900 - total flux cleaned = 0.00243134 Jy ! Component: 3950 - total flux cleaned = 0.00250204 Jy ! Component: 4000 - total flux cleaned = 0.00254105 Jy ! Component: 4050 - total flux cleaned = 0.00258757 Jy ! Total flux subtracted in 4096 components = 0.00264921 Jy ! Clean residual min=-0.000550 max=0.000457 Jy/beam ! Clean residual mean=0.000004 rms=0.000134 Jy/beam ! Combined flux in latest and established models = 0.130101 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 387 components and 0.130101 Jy ![Exited script file: muppet] wmap "J2034+1154_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.329 x 6.217 at -1.655 degrees (North through East) ! Clean map min=-0.0012974 max=0.082896 Jy/beam ! Writing clean map to FITS file: J2034+1154_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0828964 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000129365 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.468168 0.468168 0.936336 1.87267 3.74535 7.49069 14.9814 29.9628 59.9255 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.082 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.329 x 6.217 at -1.655 degrees (North through East) ! Clean map min=-0.0012974 max=0.082896 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2034+1154_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:35:46 2017