! Started logfile: J2032-2125_S_2014_08_09_pus_uvs.log on Tue Nov 29 23:15:22 2016 obs J2032-2125_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J2032-2125_S_2014_08_09_pus_uva.fits ! AN table 1: 121 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.779614 visibilities/baseline/integration-bin. ! Found source: J2032-2125 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 16980 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2032-2125_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 138 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 138 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 138 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 138 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.948611Jy sigma=0.009118 ! Fit after self-cal, rms=0.919120Jy sigma=0.008842 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.044 mas, bmaj=12.85 mas, bpa=18.93 degrees ! Estimated noise=871.118 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0643261 Jy ! Component: 100 - total flux cleaned = 0.0786039 Jy ! Total flux subtracted in 100 components = 0.0786039 Jy ! Clean residual min=-0.003473 max=0.004859 Jy/beam ! Clean residual mean=-0.000008 rms=0.001037 Jy/beam ! Combined flux in latest and established models = 0.078604 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.078604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087296Jy sigma=0.000781 ! Fit after self-cal, rms=0.087271Jy sigma=0.000781 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.85 mas, bmaj=14.07 mas, bpa=17.14 degrees ! Estimated noise=573.249 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00673386 Jy ! Component: 100 - total flux cleaned = 0.0099995 Jy ! Component: 150 - total flux cleaned = 0.0117781 Jy ! Component: 200 - total flux cleaned = 0.0128022 Jy ! Total flux subtracted in 200 components = 0.0128022 Jy ! Clean residual min=-0.002050 max=0.002409 Jy/beam ! Clean residual mean=0.000003 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.0914062 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 54 components and 0.0914062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086740Jy sigma=0.000776 ! Fit after self-cal, rms=0.086764Jy sigma=0.000776 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.89 HN 1.02 KP 1.05 ! LA 1.11 MK 1.00* NL 0.96 OV 0.96 ! PT 1.05 SC 0.99 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 1.03 KP 1.03 ! LA 1.07 MK 1.00* NL 0.98 OV 1.01 ! PT 1.03 SC 1.09 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.13 HN 1.07 KP 0.91 ! LA 0.86 MK 1.00* NL 1.01 OV 0.95 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.04 HN 1.03 KP 0.91 ! LA 0.84 MK 1.00* NL 1.08 OV 0.96 ! PT 1.00 SC 0.99 ! ! ! Fit before self-cal, rms=0.086764Jy sigma=0.000776 ! Fit after self-cal, rms=0.085498Jy sigma=0.000773 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.869 mas, bmaj=14.18 mas, bpa=17.14 degrees ! Estimated noise=573.049 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.0615e-05 Jy ! Component: 100 - total flux cleaned = 9.36072e-06 Jy ! Component: 150 - total flux cleaned = -7.16986e-06 Jy ! Component: 200 - total flux cleaned = -2.23002e-05 Jy ! Total flux subtracted in 200 components = -2.23002e-05 Jy ! Clean residual min=-0.001669 max=0.002125 Jy/beam ! Clean residual mean=0.000001 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.0913839 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 71 components and 0.0913839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085490Jy sigma=0.000773 ! Fit after self-cal, rms=0.085478Jy sigma=0.000772 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085478Jy sigma=0.000772 ! Fit after self-cal, rms=0.085970Jy sigma=0.000772 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.875 mas, bmaj=14.2 mas, bpa=17.12 degrees ! Estimated noise=575.221 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.00234e-05 Jy ! Component: 100 - total flux cleaned = 6.42142e-05 Jy ! Component: 150 - total flux cleaned = 7.83625e-05 Jy ! Component: 200 - total flux cleaned = 9.024e-05 Jy ! Total flux subtracted in 200 components = 9.024e-05 Jy ! Clean residual min=-0.001614 max=0.002066 Jy/beam ! Clean residual mean=0.000002 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.0914741 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 81 components and 0.0914741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085965Jy sigma=0.000772 ! Fit after self-cal, rms=0.085971Jy sigma=0.000772 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (53, -13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00034449 Jy ! Component: 100 - total flux cleaned = -0.000239042 Jy ! Component: 150 - total flux cleaned = -0.000685925 Jy ! Component: 200 - total flux cleaned = -0.00103207 Jy ! Total flux subtracted in 200 components = -0.00103207 Jy ! Clean residual min=-0.001480 max=0.001623 Jy/beam ! Clean residual mean=0.000002 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.0904421 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 102 components and 0.0904421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085907Jy sigma=0.000771 ! Fit after self-cal, rms=0.085898Jy sigma=0.000771 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085898Jy sigma=0.000771 ! Fit after self-cal, rms=0.086358Jy sigma=0.000771 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.877 mas, bmaj=14.2 mas, bpa=17.09 degrees ! Estimated noise=576.173 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000259069 Jy ! Component: 100 - total flux cleaned = -0.000561202 Jy ! Component: 150 - total flux cleaned = -0.00085846 Jy ! Component: 200 - total flux cleaned = -0.00101264 Jy ! Total flux subtracted in 200 components = -0.00101264 Jy ! Clean residual min=-0.001586 max=0.001570 Jy/beam ! Clean residual mean=0.000003 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.0894294 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 125 components and 0.0894294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086340Jy sigma=0.000771 ! Fit after self-cal, rms=0.086349Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00024017 Jy ! Component: 100 - total flux cleaned = -0.000441021 Jy ! Component: 150 - total flux cleaned = -0.000504716 Jy ! Component: 200 - total flux cleaned = -0.000533583 Jy ! Total flux subtracted in 200 components = -0.000533583 Jy ! Clean residual min=-0.001576 max=0.001597 Jy/beam ! Clean residual mean=0.000003 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.0888959 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 131 components and 0.0888958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086342Jy sigma=0.000771 ! Fit after self-cal, rms=0.086341Jy sigma=0.000771 ! Inverting map ! Added new window around map position (-66, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000709412 Jy ! Component: 100 - total flux cleaned = 0.000863761 Jy ! Component: 150 - total flux cleaned = 0.00102256 Jy ! Component: 200 - total flux cleaned = 0.00108286 Jy ! Total flux subtracted in 200 components = 0.00108286 Jy ! Clean residual min=-0.001298 max=0.001438 Jy/beam ! Clean residual mean=0.000001 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.0899787 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 157 components and 0.0899787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086312Jy sigma=0.000771 ! Fit after self-cal, rms=0.086306Jy sigma=0.000771 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086306Jy sigma=0.000771 ! Fit after self-cal, rms=0.086622Jy sigma=0.000770 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.939 mas, bmaj=19.32 mas, bpa=7.741 degrees ! Estimated noise=650.815 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000179163 Jy ! Component: 100 - total flux cleaned = 0.000305054 Jy ! Component: 150 - total flux cleaned = 0.000377246 Jy ! Component: 200 - total flux cleaned = 0.000403765 Jy ! Total flux subtracted in 200 components = 0.000403765 Jy ! Clean residual min=-0.001377 max=0.001243 Jy/beam ! Clean residual mean=0.000004 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.0903825 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 189 components and 0.0903825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086617Jy sigma=0.000770 ! Fit after self-cal, rms=0.086622Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000157095 Jy ! Component: 100 - total flux cleaned = 0.000182833 Jy ! Component: 150 - total flux cleaned = 0.000193986 Jy ! Component: 200 - total flux cleaned = 0.000173438 Jy ! Total flux subtracted in 200 components = 0.000173438 Jy ! Clean residual min=-0.001356 max=0.001225 Jy/beam ! Clean residual mean=0.000004 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.0905559 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 204 components and 0.0905559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086619Jy sigma=0.000770 ! Fit after self-cal, rms=0.086619Jy sigma=0.000770 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.88 mas, bmaj=14.21 mas, bpa=17.07 degrees ! Estimated noise=576.902 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.88 x 14.21 at 17.07 degrees (North through East) ! Clean map min=-0.0022213 max=0.08172 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.044 mas, bmaj=12.97 mas, bpa=18.92 degrees ! Estimated noise=877.735 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0646588 Jy ! Component: 100 - total flux cleaned = 0.0791766 Jy ! Component: 150 - total flux cleaned = 0.0846525 Jy ! Component: 200 - total flux cleaned = 0.0867805 Jy ! Total flux subtracted in 200 components = 0.0867805 Jy ! Clean residual min=-0.002593 max=0.002871 Jy/beam ! Clean residual mean=-0.000003 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.0867805 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.0867805 Jy ! Inverting map and beam ! Estimated beam: bmin=3.88 mas, bmaj=14.21 mas, bpa=17.07 degrees ! Estimated noise=576.902 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129675 Jy ! Component: 100 - total flux cleaned = 0.00165279 Jy ! Component: 150 - total flux cleaned = 0.00214961 Jy ! Component: 200 - total flux cleaned = 0.00244842 Jy ! Total flux subtracted in 200 components = 0.00244842 Jy ! Clean residual min=-0.001530 max=0.001567 Jy/beam ! Clean residual mean=0.000001 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.0892289 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 53 components and 0.089229 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.939 mas, bmaj=19.32 mas, bpa=7.741 degrees ! Estimated noise=650.815 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000410468 Jy ! Component: 100 - total flux cleaned = 0.000678318 Jy ! Component: 150 - total flux cleaned = 0.000769599 Jy ! Component: 200 - total flux cleaned = 0.000822771 Jy ! Total flux subtracted in 200 components = 0.000822771 Jy ! Clean residual min=-0.001510 max=0.001294 Jy/beam ! Clean residual mean=0.000003 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.0900517 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.4999e-05 Jy ! Component: 100 - total flux cleaned = 4.62088e-05 Jy ! Component: 150 - total flux cleaned = 0.000104674 Jy ! Component: 200 - total flux cleaned = 0.000122698 Jy ! Total flux subtracted in 200 components = 0.000122698 Jy ! Clean residual min=-0.001465 max=0.001271 Jy/beam ! Clean residual mean=0.000004 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.0901744 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 113 components and 0.0901744 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.88 mas, bmaj=14.21 mas, bpa=17.07 degrees ! Estimated noise=576.902 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000358012 Jy ! Component: 100 - total flux cleaned = 0.000388846 Jy ! Component: 150 - total flux cleaned = 0.0003614 Jy ! Component: 200 - total flux cleaned = 0.000336592 Jy ! Total flux subtracted in 200 components = 0.000336592 Jy ! Clean residual min=-0.001360 max=0.001315 Jy/beam ! Clean residual mean=0.000002 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.090511 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 141 components and 0.090511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086633Jy sigma=0.000771 ! Fit after self-cal, rms=0.086626Jy sigma=0.000771 wmodel J2032-2125_S_2014_08_09_pus_map.mod ! Writing 141 model components to file: J2032-2125_S_2014_08_09_pus_map.mod wobs J2032-2125_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J2032-2125_S_2014_08_09_pus_uvs.fits wwins J2032-2125_S_2014_08_09_pus_map.win ! wwins: Wrote 3 windows to J2032-2125_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000247355 Jy ! Component: 100 - total flux cleaned = -0.000404022 Jy ! Component: 150 - total flux cleaned = -0.000553258 Jy ! Component: 200 - total flux cleaned = -0.000696733 Jy ! Component: 250 - total flux cleaned = -0.000874789 Jy ! Component: 300 - total flux cleaned = -0.000970744 Jy ! Component: 350 - total flux cleaned = -0.00110019 Jy ! Component: 400 - total flux cleaned = -0.00109971 Jy ! Component: 450 - total flux cleaned = -0.0011524 Jy ! Component: 500 - total flux cleaned = -0.00118641 Jy ! Component: 550 - total flux cleaned = -0.00121986 Jy ! Component: 600 - total flux cleaned = -0.00123646 Jy ! Component: 650 - total flux cleaned = -0.00133253 Jy ! Component: 700 - total flux cleaned = -0.00137966 Jy ! Component: 750 - total flux cleaned = -0.00145636 Jy ! Component: 800 - total flux cleaned = -0.00153177 Jy ! Component: 850 - total flux cleaned = -0.0016203 Jy ! Component: 900 - total flux cleaned = -0.00170722 Jy ! Component: 950 - total flux cleaned = -0.00182119 Jy ! Component: 1000 - total flux cleaned = -0.00184916 Jy ! Component: 1050 - total flux cleaned = -0.00193235 Jy ! Component: 1100 - total flux cleaned = -0.00200047 Jy ! Component: 1150 - total flux cleaned = -0.00209443 Jy ! Component: 1200 - total flux cleaned = -0.00210744 Jy ! Component: 1250 - total flux cleaned = -0.00215968 Jy ! Component: 1300 - total flux cleaned = -0.00219824 Jy ! Component: 1350 - total flux cleaned = -0.0022364 Jy ! Component: 1400 - total flux cleaned = -0.00228658 Jy ! Component: 1450 - total flux cleaned = -0.00227435 Jy ! Component: 1500 - total flux cleaned = -0.0023111 Jy ! Component: 1550 - total flux cleaned = -0.00227503 Jy ! Component: 1600 - total flux cleaned = -0.00231096 Jy ! Component: 1650 - total flux cleaned = -0.002311 Jy ! Component: 1700 - total flux cleaned = -0.00233417 Jy ! Component: 1750 - total flux cleaned = -0.00234557 Jy ! Component: 1800 - total flux cleaned = -0.00230011 Jy ! Component: 1850 - total flux cleaned = -0.00230024 Jy ! Component: 1900 - total flux cleaned = -0.00226696 Jy ! Component: 1950 - total flux cleaned = -0.00224488 Jy ! Component: 2000 - total flux cleaned = -0.00224487 Jy ! Component: 2050 - total flux cleaned = -0.00222302 Jy ! Component: 2100 - total flux cleaned = -0.00214839 Jy ! Component: 2150 - total flux cleaned = -0.00212738 Jy ! Component: 2200 - total flux cleaned = -0.00214831 Jy ! Component: 2250 - total flux cleaned = -0.00211701 Jy ! Component: 2300 - total flux cleaned = -0.00215827 Jy ! Component: 2350 - total flux cleaned = -0.00215817 Jy ! Component: 2400 - total flux cleaned = -0.00216841 Jy ! Component: 2450 - total flux cleaned = -0.0021683 Jy ! Component: 2500 - total flux cleaned = -0.00213851 Jy ! Component: 2550 - total flux cleaned = -0.00215814 Jy ! Component: 2600 - total flux cleaned = -0.00214831 Jy ! Component: 2650 - total flux cleaned = -0.00215818 Jy ! Component: 2700 - total flux cleaned = -0.00215804 Jy ! Component: 2750 - total flux cleaned = -0.00213904 Jy ! Component: 2800 - total flux cleaned = -0.00220541 Jy ! Component: 2850 - total flux cleaned = -0.00218662 Jy ! Component: 2900 - total flux cleaned = -0.00222396 Jy ! Component: 2950 - total flux cleaned = -0.00225178 Jy ! Component: 3000 - total flux cleaned = -0.00224244 Jy ! Component: 3050 - total flux cleaned = -0.00226984 Jy ! Component: 3100 - total flux cleaned = -0.00229705 Jy ! Component: 3150 - total flux cleaned = -0.00227905 Jy ! Component: 3200 - total flux cleaned = -0.0022881 Jy ! Component: 3250 - total flux cleaned = -0.00231485 Jy ! Component: 3300 - total flux cleaned = -0.00231485 Jy ! Component: 3350 - total flux cleaned = -0.00233248 Jy ! Component: 3400 - total flux cleaned = -0.00234112 Jy ! Component: 3450 - total flux cleaned = -0.00236713 Jy ! Component: 3500 - total flux cleaned = -0.00234126 Jy ! Component: 3550 - total flux cleaned = -0.0023841 Jy ! Component: 3600 - total flux cleaned = -0.00238411 Jy ! Component: 3650 - total flux cleaned = -0.00240953 Jy ! Component: 3700 - total flux cleaned = -0.00240961 Jy ! Component: 3750 - total flux cleaned = -0.00240956 Jy ! Component: 3800 - total flux cleaned = -0.00243451 Jy ! Component: 3850 - total flux cleaned = -0.00245106 Jy ! Component: 3900 - total flux cleaned = -0.00244288 Jy ! Component: 3950 - total flux cleaned = -0.00247572 Jy ! Component: 4000 - total flux cleaned = -0.00245945 Jy ! Component: 4050 - total flux cleaned = -0.00248376 Jy ! Total flux subtracted in 4096 components = -0.00248371 Jy ! Clean residual min=-0.000492 max=0.000720 Jy/beam ! Clean residual mean=0.000001 rms=0.000158 Jy/beam ! Combined flux in latest and established models = 0.0880273 Jy keep ! Adding 280 model components to the UV plane model. ! The established model now contains 421 components and 0.0880273 Jy ![Exited script file: muppet] wmap "J2032-2125_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.88 x 14.21 at 17.07 degrees (North through East) ! Clean map min=-0.0021184 max=0.08198 Jy/beam ! Writing clean map to FITS file: J2032-2125_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0819799 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000156417 device "J2032-2125_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J2032-2125_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.572399 0.572399 1.1448 2.2896 4.57919 9.15839 18.3168 36.6335 73.2671 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.081 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.88 x 14.21 at 17.07 degrees (North through East) ! Clean map min=-0.0021184 max=0.08198 Jy/beam quit ! Quitting program ! Log file J2032-2125_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 23:15:28 2016