! Started logfile: J2031-2615_S_2014_06_09_pus_uvs.log on Wed Nov 16 20:05:32 2016
obs J2031-2615_S_2014_06_09_pus_uva.fits
! Reading UV FITS file: J2031-2615_S_2014_06_09_pus_uva.fits
! AN table 1: 122 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.468124 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J2031-2615
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 336 lines of history.
! 
! Reading 10280 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J2031-2615_S_2014_06_09_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 380 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 440 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 499 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 440 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.987017Jy  sigma=0.009562
! Fit after  self-cal, rms=0.945691Jy  sigma=0.009216
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.338 mas, bmaj=7.732 mas, bpa=10.45 degrees
! Estimated noise=1467.66 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0445383 Jy
! Component: 100  -  total flux cleaned = 0.0543846 Jy
! Total flux subtracted in 100 components = 0.0543846 Jy
! Clean residual min=-0.003771 max=0.004644 Jy/beam
! Clean residual mean=0.000003 rms=0.001122 Jy/beam
! Combined flux in latest and established models = 0.0543846 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0543846 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086166Jy  sigma=0.000756
! Fit after  self-cal, rms=0.085261Jy  sigma=0.000749
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.445 mas, bmaj=12.32 mas, bpa=13.02 degrees
! Estimated noise=775.512 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00487046 Jy
! Component: 100  -  total flux cleaned = 0.00692006 Jy
! Component: 150  -  total flux cleaned = 0.00785445 Jy
! Component: 200  -  total flux cleaned = 0.00817901 Jy
! Total flux subtracted in 200 components = 0.00817901 Jy
! Clean residual min=-0.002914 max=0.002622 Jy/beam
! Clean residual mean=0.000014 rms=0.000754 Jy/beam
! Combined flux in latest and established models = 0.0625637 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 34 components and 0.0625636 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084999Jy  sigma=0.000747
! Fit after  self-cal, rms=0.085012Jy  sigma=0.000746
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.90     HN        0.98     KP        1.03     
!   LA        1.17     MK        0.96     NL        0.98     OV        1.05     
!   PT        1.01     SC        1.07     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.97     HN        1.04     KP        1.10     
!   LA        1.11     MK        1.00*    NL        0.94     OV        1.00     
!   PT        0.98     SC        1.07     
! 
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.19     HN        1.04     KP        0.92     
!   LA        0.85     MK        1.00*    NL        1.04     OV        0.99     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.99     HN        1.01     KP        0.88     
!   LA        0.93     MK        1.00*    NL        1.09     OV        0.98     
!   PT        0.99     SC        0.92     
! 
! 
! Fit before self-cal, rms=0.085012Jy  sigma=0.000746
! Fit after  self-cal, rms=0.084787Jy  sigma=0.000744
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.454 mas, bmaj=12.34 mas, bpa=12.95 degrees
! Estimated noise=778.777 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000135454 Jy
! Component: 100  -  total flux cleaned = 0.000194176 Jy
! Component: 150  -  total flux cleaned = 0.000260026 Jy
! Component: 200  -  total flux cleaned = 0.000288445 Jy
! Total flux subtracted in 200 components = 0.000288445 Jy
! Clean residual min=-0.002675 max=0.002799 Jy/beam
! Clean residual mean=0.000006 rms=0.000713 Jy/beam
! Combined flux in latest and established models = 0.0628521 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 39 components and 0.0628521 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084778Jy  sigma=0.000744
! Fit after  self-cal, rms=0.084787Jy  sigma=0.000743
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084787Jy  sigma=0.000743
! Fit after  self-cal, rms=0.084621Jy  sigma=0.000742
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.468 mas, bmaj=12.27 mas, bpa=12.93 degrees
! Estimated noise=778.27 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.87071e-05 Jy
! Component: 100  -  total flux cleaned = -8.82424e-05 Jy
! Component: 150  -  total flux cleaned = -8.8061e-05 Jy
! Component: 200  -  total flux cleaned = -7.54485e-05 Jy
! Total flux subtracted in 200 components = -7.54485e-05 Jy
! Clean residual min=-0.002602 max=0.002568 Jy/beam
! Clean residual mean=-0.000003 rms=0.000626 Jy/beam
! Combined flux in latest and established models = 0.0627766 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 43 components and 0.0627766 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084615Jy  sigma=0.000742
! Fit after  self-cal, rms=0.084552Jy  sigma=0.000742
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000131299 Jy
! Component: 100  -  total flux cleaned = -0.000115128 Jy
! Component: 150  -  total flux cleaned = -0.000100748 Jy
! Component: 200  -  total flux cleaned = -8.80763e-05 Jy
! Total flux subtracted in 200 components = -8.80763e-05 Jy
! Clean residual min=-0.002558 max=0.002557 Jy/beam
! Clean residual mean=-0.000002 rms=0.000624 Jy/beam
! Combined flux in latest and established models = 0.0626886 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 46 components and 0.0626886 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084546Jy  sigma=0.000742
! Fit after  self-cal, rms=0.084540Jy  sigma=0.000742
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084540Jy  sigma=0.000742
! Fit after  self-cal, rms=0.084213Jy  sigma=0.000742
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.465 mas, bmaj=12.26 mas, bpa=12.97 degrees
! Estimated noise=776.517 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.61448e-05 Jy
! Component: 100  -  total flux cleaned = -8.58855e-05 Jy
! Component: 150  -  total flux cleaned = -5.77112e-05 Jy
! Component: 200  -  total flux cleaned = -4.52442e-05 Jy
! Total flux subtracted in 200 components = -4.52442e-05 Jy
! Clean residual min=-0.002618 max=0.002539 Jy/beam
! Clean residual mean=-0.000003 rms=0.000622 Jy/beam
! Combined flux in latest and established models = 0.0626433 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 46 components and 0.0626433 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084208Jy  sigma=0.000742
! Fit after  self-cal, rms=0.084190Jy  sigma=0.000742
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.97831e-05 Jy
! Component: 100  -  total flux cleaned = -3.93626e-05 Jy
! Component: 150  -  total flux cleaned = -2.54138e-05 Jy
! Component: 200  -  total flux cleaned = -1.3974e-06 Jy
! Total flux subtracted in 200 components = -1.3974e-06 Jy
! Clean residual min=-0.002637 max=0.002549 Jy/beam
! Clean residual mean=-0.000003 rms=0.000624 Jy/beam
! Combined flux in latest and established models = 0.0626419 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 46 components and 0.0626419 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084184Jy  sigma=0.000742
! Fit after  self-cal, rms=0.084182Jy  sigma=0.000742
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084182Jy  sigma=0.000742
! Fit after  self-cal, rms=0.084128Jy  sigma=0.000742
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.237 mas, bmaj=27.46 mas, bpa=2.338 degrees
! Estimated noise=842.138 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000120033 Jy
! Component: 100  -  total flux cleaned = 0.000119514 Jy
! Component: 150  -  total flux cleaned = 0.000119077 Jy
! Component: 200  -  total flux cleaned = 0.000118751 Jy
! Total flux subtracted in 200 components = 0.000118751 Jy
! Clean residual min=-0.002671 max=0.002639 Jy/beam
! Clean residual mean=-0.000004 rms=0.000746 Jy/beam
! Combined flux in latest and established models = 0.0627607 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 48 components and 0.0627607 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084125Jy  sigma=0.000742
! Fit after  self-cal, rms=0.084122Jy  sigma=0.000742
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.02697e-05 Jy
! Component: 100  -  total flux cleaned = 4.95865e-05 Jy
! Component: 150  -  total flux cleaned = 4.9117e-05 Jy
! Component: 200  -  total flux cleaned = 4.89808e-05 Jy
! Total flux subtracted in 200 components = 4.89808e-05 Jy
! Clean residual min=-0.002654 max=0.002637 Jy/beam
! Clean residual mean=-0.000004 rms=0.000745 Jy/beam
! Combined flux in latest and established models = 0.0628096 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 50 components and 0.0628096 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084120Jy  sigma=0.000742
! Fit after  self-cal, rms=0.084116Jy  sigma=0.000742
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.466 mas, bmaj=12.27 mas, bpa=12.98 degrees
! Estimated noise=776.152 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.466 x 12.27 at 12.98 degrees (North through East)
! Clean map  min=-0.0025747  max=0.058825 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.348 mas, bmaj=7.779 mas, bpa=10.6 degrees
! Estimated noise=1475.07 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0455379 Jy
! Component: 100  -  total flux cleaned = 0.0557292 Jy
! Component: 150  -  total flux cleaned = 0.0594905 Jy
! Component: 200  -  total flux cleaned = 0.06115 Jy
! Total flux subtracted in 200 components = 0.06115 Jy
! Clean residual min=-0.003704 max=0.003432 Jy/beam
! Clean residual mean=-0.000001 rms=0.000885 Jy/beam
! Combined flux in latest and established models = 0.06115 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.06115 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.466 mas, bmaj=12.27 mas, bpa=12.98 degrees
! Estimated noise=776.152 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000655597 Jy
! Component: 100  -  total flux cleaned = 0.000744457 Jy
! Component: 150  -  total flux cleaned = 0.000897141 Jy
! Component: 200  -  total flux cleaned = 0.000995278 Jy
! Total flux subtracted in 200 components = 0.000995278 Jy
! Clean residual min=-0.002760 max=0.002666 Jy/beam
! Clean residual mean=-0.000003 rms=0.000651 Jy/beam
! Combined flux in latest and established models = 0.0621453 Jy
! Adding 15 model components to the UV plane model.
! The established model now contains 36 components and 0.0621453 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.237 mas, bmaj=27.46 mas, bpa=2.338 degrees
! Estimated noise=842.138 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000382776 Jy
! Component: 100  -  total flux cleaned = 0.000403048 Jy
! Component: 150  -  total flux cleaned = 0.000438625 Jy
! Component: 200  -  total flux cleaned = 0.000470691 Jy
! Total flux subtracted in 200 components = 0.000470691 Jy
! Clean residual min=-0.002760 max=0.002678 Jy/beam
! Clean residual mean=-0.000005 rms=0.000752 Jy/beam
! Combined flux in latest and established models = 0.062616 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.94173e-05 Jy
! Component: 100  -  total flux cleaned = 5.54727e-05 Jy
! Component: 150  -  total flux cleaned = 7.91069e-05 Jy
! Component: 200  -  total flux cleaned = 0.000100668 Jy
! Total flux subtracted in 200 components = 0.000100668 Jy
! Clean residual min=-0.002726 max=0.002640 Jy/beam
! Clean residual mean=-0.000004 rms=0.000750 Jy/beam
! Combined flux in latest and established models = 0.0627167 Jy
! Adding 15 model components to the UV plane model.
! The established model now contains 49 components and 0.0627167 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.466 mas, bmaj=12.27 mas, bpa=12.98 degrees
! Estimated noise=776.152 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.5617e-05 Jy
! Component: 100  -  total flux cleaned = -1.01674e-05 Jy
! Component: 150  -  total flux cleaned = -6.52329e-05 Jy
! Component: 200  -  total flux cleaned = -6.48879e-05 Jy
! Total flux subtracted in 200 components = -6.48879e-05 Jy
! Clean residual min=-0.002674 max=0.002589 Jy/beam
! Clean residual mean=-0.000003 rms=0.000631 Jy/beam
! Combined flux in latest and established models = 0.0626518 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 58 components and 0.0626518 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084130Jy  sigma=0.000742
! Fit after  self-cal, rms=0.084127Jy  sigma=0.000742
wmodel J2031-2615_S_2014_06_09_pus_map.mod
! Writing 58 model components to file: J2031-2615_S_2014_06_09_pus_map.mod
wobs J2031-2615_S_2014_06_09_pus_uvs.fits
! Writing UV FITS file: J2031-2615_S_2014_06_09_pus_uvs.fits
wwins J2031-2615_S_2014_06_09_pus_map.win
! wwins: Wrote 1 windows to J2031-2615_S_2014_06_09_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000170864 Jy
! Component: 100  -  total flux cleaned = 0.000289572 Jy
! Component: 150  -  total flux cleaned = 0.00022219 Jy
! Component: 200  -  total flux cleaned = 0.000158102 Jy
! Component: 250  -  total flux cleaned = 0.000130193 Jy
! Component: 300  -  total flux cleaned = 0.000185874 Jy
! Component: 350  -  total flux cleaned = 0.000212983 Jy
! Component: 400  -  total flux cleaned = 0.000237798 Jy
! Component: 450  -  total flux cleaned = 0.000260929 Jy
! Component: 500  -  total flux cleaned = 0.0002385 Jy
! Component: 550  -  total flux cleaned = 0.000217202 Jy
! Component: 600  -  total flux cleaned = 0.000153468 Jy
! Component: 650  -  total flux cleaned = 9.22197e-05 Jy
! Component: 700  -  total flux cleaned = 5.20263e-05 Jy
! Component: 750  -  total flux cleaned = 1.34153e-05 Jy
! Component: 800  -  total flux cleaned = 1.31527e-05 Jy
! Component: 850  -  total flux cleaned = 4.99998e-05 Jy
! Component: 900  -  total flux cleaned = 0.000121501 Jy
! Component: 950  -  total flux cleaned = 0.00020881 Jy
! Component: 1000  -  total flux cleaned = 0.000346062 Jy
! Component: 1050  -  total flux cleaned = 0.000463616 Jy
! Component: 1100  -  total flux cleaned = 0.000578806 Jy
! Component: 1150  -  total flux cleaned = 0.000708081 Jy
! Component: 1200  -  total flux cleaned = 0.000897842 Jy
! Component: 1250  -  total flux cleaned = 0.000913551 Jy
! Component: 1300  -  total flux cleaned = 0.00108202 Jy
! Component: 1350  -  total flux cleaned = 0.00120203 Jy
! Component: 1400  -  total flux cleaned = 0.00130508 Jy
! Component: 1450  -  total flux cleaned = 0.00144983 Jy
! Component: 1500  -  total flux cleaned = 0.00157802 Jy
! Component: 1550  -  total flux cleaned = 0.00169017 Jy
! Component: 1600  -  total flux cleaned = 0.00178673 Jy
! Component: 1650  -  total flux cleaned = 0.0019091 Jy
! Component: 1700  -  total flux cleaned = 0.00198921 Jy
! Component: 1750  -  total flux cleaned = 0.0020817 Jy
! Component: 1800  -  total flux cleaned = 0.00222435 Jy
! Component: 1850  -  total flux cleaned = 0.00230102 Jy
! Component: 1900  -  total flux cleaned = 0.00235149 Jy
! Component: 1950  -  total flux cleaned = 0.0024263 Jy
! Component: 2000  -  total flux cleaned = 0.00247548 Jy
! Component: 2050  -  total flux cleaned = 0.00253587 Jy
! Component: 2100  -  total flux cleaned = 0.00255954 Jy
! Component: 2150  -  total flux cleaned = 0.00263025 Jy
! Component: 2200  -  total flux cleaned = 0.00264191 Jy
! Component: 2250  -  total flux cleaned = 0.00269919 Jy
! Component: 2300  -  total flux cleaned = 0.00275579 Jy
! Component: 2350  -  total flux cleaned = 0.0028229 Jy
! Component: 2400  -  total flux cleaned = 0.00288914 Jy
! Component: 2450  -  total flux cleaned = 0.00292192 Jy
! Component: 2500  -  total flux cleaned = 0.00299727 Jy
! Component: 2550  -  total flux cleaned = 0.00300795 Jy
! Component: 2600  -  total flux cleaned = 0.00308193 Jy
! Component: 2650  -  total flux cleaned = 0.0031236 Jy
! Component: 2700  -  total flux cleaned = 0.0031547 Jy
! Component: 2750  -  total flux cleaned = 0.00321621 Jy
! Component: 2800  -  total flux cleaned = 0.00324655 Jy
! Component: 2850  -  total flux cleaned = 0.00330672 Jy
! Component: 2900  -  total flux cleaned = 0.00333655 Jy
! Component: 2950  -  total flux cleaned = 0.00340545 Jy
! Component: 3000  -  total flux cleaned = 0.00344437 Jy
! Component: 3050  -  total flux cleaned = 0.00348287 Jy
! Component: 3100  -  total flux cleaned = 0.00354025 Jy
! Component: 3150  -  total flux cleaned = 0.00357816 Jy
! Component: 3200  -  total flux cleaned = 0.00363462 Jy
! Component: 3250  -  total flux cleaned = 0.00369056 Jy
! Component: 3300  -  total flux cleaned = 0.00372752 Jy
! Component: 3350  -  total flux cleaned = 0.00379177 Jy
! Component: 3400  -  total flux cleaned = 0.00385536 Jy
! Component: 3450  -  total flux cleaned = 0.00388251 Jy
! Component: 3500  -  total flux cleaned = 0.00391841 Jy
! Component: 3550  -  total flux cleaned = 0.00397169 Jy
! Component: 3600  -  total flux cleaned = 0.00398935 Jy
! Component: 3650  -  total flux cleaned = 0.00401567 Jy
! Component: 3700  -  total flux cleaned = 0.00406795 Jy
! Component: 3750  -  total flux cleaned = 0.00406793 Jy
! Component: 3800  -  total flux cleaned = 0.00410242 Jy
! Component: 3850  -  total flux cleaned = 0.00412811 Jy
! Component: 3900  -  total flux cleaned = 0.0041706 Jy
! Component: 3950  -  total flux cleaned = 0.00418746 Jy
! Component: 4000  -  total flux cleaned = 0.00422947 Jy
! Component: 4050  -  total flux cleaned = 0.00424613 Jy
! Total flux subtracted in 4096 components = 0.00427932 Jy
! Clean residual min=-0.000477 max=0.000630 Jy/beam
! Clean residual mean=0.000001 rms=0.000160 Jy/beam
! Combined flux in latest and established models = 0.0669311 Jy
keep
! Adding 256 model components to the UV plane model.
! The established model now contains 314 components and 0.0669311 Jy
![Exited script file: muppet]
wmap "J2031-2615_S_2014_06_09_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.466 x 12.27 at 12.98 degrees (North through East)
! Clean map  min=-0.0016192  max=0.058844 Jy/beam
! Writing clean map to FITS file: J2031-2615_S_2014_06_09_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0588443 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00015932 
device "J2031-2615_S_2014_06_09_pus\_map.eps/VPS"
! Attempting to open device: 'J2031-2615_S_2014_06_09_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.812248 0.812248 1.6245 3.24899 6.49798 12.996 25.9919 51.9838
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0004 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.058 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.466 x 12.27 at 12.98 degrees (North through East)
! Clean map  min=-0.0016192  max=0.058844 Jy/beam
quit
! Quitting program
! Log file J2031-2615_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 20:05:37 2016