! Started logfile: J2025-2845_S_2014_06_09_pus_uvs.log on Wed Nov 16 20:05:12 2016 obs J2025-2845_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J2025-2845_S_2014_06_09_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.692063 visibilities/baseline/integration-bin. ! Found source: J2025-2845 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 6976 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2025-2845_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.893725Jy sigma=0.008107 ! Fit after self-cal, rms=0.882539Jy sigma=0.008009 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.664 mas, bmaj=6.369 mas, bpa=-4.892 degrees ! Estimated noise=1534.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0903574 Jy ! Component: 100 - total flux cleaned = 0.114155 Jy ! Total flux subtracted in 100 components = 0.114155 Jy ! Clean residual min=-0.006420 max=0.010985 Jy/beam ! Clean residual mean=-0.000006 rms=0.001756 Jy/beam ! Combined flux in latest and established models = 0.114155 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.114155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094683Jy sigma=0.000800 ! Fit after self-cal, rms=0.094687Jy sigma=0.000800 ! Inverting map ! Added new window around map position (3.5, -6.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108341 Jy ! Component: 100 - total flux cleaned = 0.0174081 Jy ! Total flux subtracted in 100 components = 0.0174081 Jy ! Clean residual min=-0.005387 max=0.006809 Jy/beam ! Clean residual mean=-0.000001 rms=0.001418 Jy/beam ! Combined flux in latest and established models = 0.131563 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 33 components and 0.131563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092869Jy sigma=0.000780 ! Fit after self-cal, rms=0.092848Jy sigma=0.000780 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.338 mas, bmaj=8.148 mas, bpa=-3.186 degrees ! Estimated noise=972.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0091192 Jy ! Component: 100 - total flux cleaned = 0.014354 Jy ! Component: 150 - total flux cleaned = 0.0176834 Jy ! Component: 200 - total flux cleaned = 0.0198925 Jy ! Total flux subtracted in 200 components = 0.0198925 Jy ! Clean residual min=-0.004563 max=0.003484 Jy/beam ! Clean residual mean=0.000003 rms=0.000971 Jy/beam ! Combined flux in latest and established models = 0.151456 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 64 components and 0.151456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091874Jy sigma=0.000771 ! Fit after self-cal, rms=0.091864Jy sigma=0.000771 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.83 HN 1.12 KP 1.06 ! LA 1.18 MK 1.02 NL 0.94 OV 0.96 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.17 KP 1.01 ! LA 1.13 MK 1.10 NL 1.05 OV 1.00 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.14 HN 1.00 KP 0.94 ! LA 0.89 MK 1.04 NL 1.01 OV 0.89 ! PT 0.99 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.08 KP 0.88 ! LA 0.86 MK 0.97 NL 1.04 OV 0.98 ! PT 1.01 SC 0.93 ! ! ! Fit before self-cal, rms=0.091864Jy sigma=0.000771 ! Fit after self-cal, rms=0.092570Jy sigma=0.000759 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.37 mas, bmaj=8.202 mas, bpa=-2.712 degrees ! Estimated noise=975.159 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000863788 Jy ! Component: 100 - total flux cleaned = -0.000991905 Jy ! Component: 150 - total flux cleaned = -0.000921648 Jy ! Component: 200 - total flux cleaned = -0.000892416 Jy ! Total flux subtracted in 200 components = -0.000892416 Jy ! Clean residual min=-0.002994 max=0.003036 Jy/beam ! Clean residual mean=-0.000012 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.150563 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 80 components and 0.150563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092535Jy sigma=0.000758 ! Fit after self-cal, rms=0.092545Jy sigma=0.000758 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092545Jy sigma=0.000758 ! Fit after self-cal, rms=0.093915Jy sigma=0.000756 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.371 mas, bmaj=8.229 mas, bpa=-2.679 degrees ! Estimated noise=975.341 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000660206 Jy ! Component: 100 - total flux cleaned = -0.000622606 Jy ! Component: 150 - total flux cleaned = -0.000589024 Jy ! Component: 200 - total flux cleaned = -0.000559858 Jy ! Total flux subtracted in 200 components = -0.000559858 Jy ! Clean residual min=-0.002702 max=0.002900 Jy/beam ! Clean residual mean=-0.000005 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.150004 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 92 components and 0.150004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093887Jy sigma=0.000756 ! Fit after self-cal, rms=0.093933Jy sigma=0.000756 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.42621e-05 Jy ! Component: 100 - total flux cleaned = 3.42487e-05 Jy ! Component: 150 - total flux cleaned = 1.09361e-05 Jy ! Component: 200 - total flux cleaned = 1.11516e-05 Jy ! Total flux subtracted in 200 components = 1.11516e-05 Jy ! Clean residual min=-0.002670 max=0.002892 Jy/beam ! Clean residual mean=-0.000005 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.150015 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 99 components and 0.150015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093920Jy sigma=0.000756 ! Fit after self-cal, rms=0.093918Jy sigma=0.000756 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093918Jy sigma=0.000756 ! Fit after self-cal, rms=0.094819Jy sigma=0.000755 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.377 mas, bmaj=8.245 mas, bpa=-2.558 degrees ! Estimated noise=976.691 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000641344 Jy ! Component: 100 - total flux cleaned = -0.000640516 Jy ! Component: 150 - total flux cleaned = -0.00064108 Jy ! Component: 200 - total flux cleaned = -0.000663717 Jy ! Total flux subtracted in 200 components = -0.000663717 Jy ! Clean residual min=-0.002595 max=0.002862 Jy/beam ! Clean residual mean=-0.000005 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.149351 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 104 components and 0.149351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094804Jy sigma=0.000755 ! Fit after self-cal, rms=0.094816Jy sigma=0.000755 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.8778e-07 Jy ! Component: 100 - total flux cleaned = -1.95997e-05 Jy ! Component: 150 - total flux cleaned = -1.91708e-05 Jy ! Component: 200 - total flux cleaned = -3.71042e-05 Jy ! Total flux subtracted in 200 components = -3.71042e-05 Jy ! Clean residual min=-0.002568 max=0.002838 Jy/beam ! Clean residual mean=-0.000005 rms=0.000714 Jy/beam ! Combined flux in latest and established models = 0.149314 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 108 components and 0.149314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094808Jy sigma=0.000755 ! Fit after self-cal, rms=0.094806Jy sigma=0.000755 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094806Jy sigma=0.000755 ! Fit after self-cal, rms=0.095466Jy sigma=0.000755 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.061 mas, bmaj=22.62 mas, bpa=-2.675 degrees ! Estimated noise=1144.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000614048 Jy ! Component: 100 - total flux cleaned = -0.000644084 Jy ! Component: 150 - total flux cleaned = -0.000656857 Jy ! Component: 200 - total flux cleaned = -0.000656871 Jy ! Total flux subtracted in 200 components = -0.000656871 Jy ! Clean residual min=-0.003035 max=0.003180 Jy/beam ! Clean residual mean=-0.000014 rms=0.000910 Jy/beam ! Combined flux in latest and established models = 0.148657 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 118 components and 0.148657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095462Jy sigma=0.000755 ! Fit after self-cal, rms=0.095469Jy sigma=0.000755 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.15672e-05 Jy ! Component: 100 - total flux cleaned = -2.18961e-05 Jy ! Component: 150 - total flux cleaned = -2.15124e-05 Jy ! Component: 200 - total flux cleaned = -2.18715e-05 Jy ! Total flux subtracted in 200 components = -2.18715e-05 Jy ! Clean residual min=-0.003014 max=0.003171 Jy/beam ! Clean residual mean=-0.000014 rms=0.000908 Jy/beam ! Combined flux in latest and established models = 0.148635 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 121 components and 0.148635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095468Jy sigma=0.000755 ! Fit after self-cal, rms=0.095467Jy sigma=0.000755 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.382 mas, bmaj=8.255 mas, bpa=-2.496 degrees ! Estimated noise=977.589 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.382 x 8.255 at -2.496 degrees (North through East) ! Clean map min=-0.002474 max=0.11345 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.685 mas, bmaj=6.395 mas, bpa=-4.22 degrees ! Estimated noise=1560.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0914838 Jy ! Component: 100 - total flux cleaned = 0.115262 Jy ! Component: 150 - total flux cleaned = 0.125256 Jy ! Component: 200 - total flux cleaned = 0.131311 Jy ! Total flux subtracted in 200 components = 0.131311 Jy ! Clean residual min=-0.004227 max=0.004106 Jy/beam ! Clean residual mean=-0.000002 rms=0.001082 Jy/beam ! Combined flux in latest and established models = 0.131311 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.131311 Jy ! Inverting map and beam ! Estimated beam: bmin=3.382 mas, bmaj=8.255 mas, bpa=-2.496 degrees ! Estimated noise=977.589 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00675942 Jy ! Component: 100 - total flux cleaned = 0.0105841 Jy ! Component: 150 - total flux cleaned = 0.0130435 Jy ! Component: 200 - total flux cleaned = 0.0147036 Jy ! Total flux subtracted in 200 components = 0.0147036 Jy ! Clean residual min=-0.002574 max=0.002783 Jy/beam ! Clean residual mean=-0.000009 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.146015 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 57 components and 0.146015 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.061 mas, bmaj=22.62 mas, bpa=-2.675 degrees ! Estimated noise=1144.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125827 Jy ! Component: 100 - total flux cleaned = 0.0019191 Jy ! Component: 150 - total flux cleaned = 0.00228892 Jy ! Component: 200 - total flux cleaned = 0.00236635 Jy ! Total flux subtracted in 200 components = 0.00236635 Jy ! Clean residual min=-0.003017 max=0.003155 Jy/beam ! Clean residual mean=-0.000015 rms=0.000908 Jy/beam ! Combined flux in latest and established models = 0.148381 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.90961e-05 Jy ! Component: 100 - total flux cleaned = 9.30257e-05 Jy ! Component: 150 - total flux cleaned = 0.000125011 Jy ! Component: 200 - total flux cleaned = 0.000147687 Jy ! Total flux subtracted in 200 components = 0.000147687 Jy ! Clean residual min=-0.003007 max=0.003161 Jy/beam ! Clean residual mean=-0.000014 rms=0.000906 Jy/beam ! Combined flux in latest and established models = 0.148529 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 69 components and 0.148529 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.382 mas, bmaj=8.255 mas, bpa=-2.496 degrees ! Estimated noise=977.589 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000171191 Jy ! Component: 100 - total flux cleaned = -0.000228709 Jy ! Component: 150 - total flux cleaned = -0.000282622 Jy ! Component: 200 - total flux cleaned = -0.000282104 Jy ! Total flux subtracted in 200 components = -0.000282104 Jy ! Clean residual min=-0.002561 max=0.002869 Jy/beam ! Clean residual mean=-0.000007 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.148247 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 80 components and 0.148247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095494Jy sigma=0.000755 ! Fit after self-cal, rms=0.095479Jy sigma=0.000755 wmodel J2025-2845_S_2014_06_09_pus_map.mod ! Writing 80 model components to file: J2025-2845_S_2014_06_09_pus_map.mod wobs J2025-2845_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J2025-2845_S_2014_06_09_pus_uvs.fits wwins J2025-2845_S_2014_06_09_pus_map.win ! wwins: Wrote 3 windows to J2025-2845_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.001022 Jy ! Component: 100 - total flux cleaned = 0.00143068 Jy ! Component: 150 - total flux cleaned = 0.00182064 Jy ! Component: 200 - total flux cleaned = 0.0022734 Jy ! Component: 250 - total flux cleaned = 0.0025101 Jy ! Component: 300 - total flux cleaned = 0.00270023 Jy ! Component: 350 - total flux cleaned = 0.00288391 Jy ! Component: 400 - total flux cleaned = 0.00295407 Jy ! Component: 450 - total flux cleaned = 0.00295309 Jy ! Component: 500 - total flux cleaned = 0.00288529 Jy ! Component: 550 - total flux cleaned = 0.00291851 Jy ! Component: 600 - total flux cleaned = 0.00295081 Jy ! Component: 650 - total flux cleaned = 0.00301411 Jy ! Component: 700 - total flux cleaned = 0.00304493 Jy ! Component: 750 - total flux cleaned = 0.00307527 Jy ! Component: 800 - total flux cleaned = 0.00313504 Jy ! Component: 850 - total flux cleaned = 0.00316409 Jy ! Component: 900 - total flux cleaned = 0.00313603 Jy ! Component: 950 - total flux cleaned = 0.00313582 Jy ! Component: 1000 - total flux cleaned = 0.00313522 Jy ! Component: 1050 - total flux cleaned = 0.00313526 Jy ! Component: 1100 - total flux cleaned = 0.00316257 Jy ! Component: 1150 - total flux cleaned = 0.00324128 Jy ! Component: 1200 - total flux cleaned = 0.00321621 Jy ! Component: 1250 - total flux cleaned = 0.00329277 Jy ! Component: 1300 - total flux cleaned = 0.00336825 Jy ! Component: 1350 - total flux cleaned = 0.00336808 Jy ! Component: 1400 - total flux cleaned = 0.00344114 Jy ! Component: 1450 - total flux cleaned = 0.0034165 Jy ! Component: 1500 - total flux cleaned = 0.00346409 Jy ! Component: 1550 - total flux cleaned = 0.00346413 Jy ! Component: 1600 - total flux cleaned = 0.00348685 Jy ! Component: 1650 - total flux cleaned = 0.0035095 Jy ! Component: 1700 - total flux cleaned = 0.00346466 Jy ! Component: 1750 - total flux cleaned = 0.00353142 Jy ! Component: 1800 - total flux cleaned = 0.00348734 Jy ! Component: 1850 - total flux cleaned = 0.0035522 Jy ! Component: 1900 - total flux cleaned = 0.00346619 Jy ! Component: 1950 - total flux cleaned = 0.00348744 Jy ! Component: 2000 - total flux cleaned = 0.00342467 Jy ! Component: 2050 - total flux cleaned = 0.00342491 Jy ! Component: 2100 - total flux cleaned = 0.00336386 Jy ! Component: 2150 - total flux cleaned = 0.00338383 Jy ! Component: 2200 - total flux cleaned = 0.00340321 Jy ! Component: 2250 - total flux cleaned = 0.00328473 Jy ! Component: 2300 - total flux cleaned = 0.00324625 Jy ! Component: 2350 - total flux cleaned = 0.00326579 Jy ! Component: 2400 - total flux cleaned = 0.00318962 Jy ! Component: 2450 - total flux cleaned = 0.0031519 Jy ! Component: 2500 - total flux cleaned = 0.00309604 Jy ! Component: 2550 - total flux cleaned = 0.00307766 Jy ! Component: 2600 - total flux cleaned = 0.00307785 Jy ! Component: 2650 - total flux cleaned = 0.00305987 Jy ! Component: 2700 - total flux cleaned = 0.00306003 Jy ! Component: 2750 - total flux cleaned = 0.00311342 Jy ! Component: 2800 - total flux cleaned = 0.00311322 Jy ! Component: 2850 - total flux cleaned = 0.00313096 Jy ! Component: 2900 - total flux cleaned = 0.00330392 Jy ! Component: 2950 - total flux cleaned = 0.00325228 Jy ! Component: 3000 - total flux cleaned = 0.00335422 Jy ! Component: 3050 - total flux cleaned = 0.00332037 Jy ! Component: 3100 - total flux cleaned = 0.00338704 Jy ! Component: 3150 - total flux cleaned = 0.00340348 Jy ! Component: 3200 - total flux cleaned = 0.00346892 Jy ! Component: 3250 - total flux cleaned = 0.00348518 Jy ! Component: 3300 - total flux cleaned = 0.0035661 Jy ! Component: 3350 - total flux cleaned = 0.00364604 Jy ! Component: 3400 - total flux cleaned = 0.0037571 Jy ! Component: 3450 - total flux cleaned = 0.00381998 Jy ! Component: 3500 - total flux cleaned = 0.00391356 Jy ! Component: 3550 - total flux cleaned = 0.00399107 Jy ! Component: 3600 - total flux cleaned = 0.00403707 Jy ! Component: 3650 - total flux cleaned = 0.00411333 Jy ! Component: 3700 - total flux cleaned = 0.00415866 Jy ! Component: 3750 - total flux cleaned = 0.00424889 Jy ! Component: 3800 - total flux cleaned = 0.00429365 Jy ! Component: 3850 - total flux cleaned = 0.00444123 Jy ! Component: 3900 - total flux cleaned = 0.00444091 Jy ! Component: 3950 - total flux cleaned = 0.00451379 Jy ! Component: 4000 - total flux cleaned = 0.00458608 Jy ! Component: 4050 - total flux cleaned = 0.00462925 Jy ! Total flux subtracted in 4096 components = 0.0047006 Jy ! Clean residual min=-0.000947 max=0.000785 Jy/beam ! Clean residual mean=-0.000002 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.152948 Jy keep ! Adding 265 model components to the UV plane model. ! The established model now contains 345 components and 0.152947 Jy ![Exited script file: muppet] wmap "J2025-2845_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.382 x 8.255 at -2.496 degrees (North through East) ! Clean map min=-0.0019454 max=0.11529 Jy/beam ! Writing clean map to FITS file: J2025-2845_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.115291 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000266836 device "J2025-2845_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J2025-2845_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.694333 0.694333 1.38867 2.77733 5.55467 11.1093 22.2187 44.4373 88.8747 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.115 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.382 x 8.255 at -2.496 degrees (North through East) ! Clean map min=-0.0019454 max=0.11529 Jy/beam quit ! Quitting program ! Log file J2025-2845_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 20:05:17 2016