! Started logfile: J2014+5059_S_2014_05_31_pus_uvs.log on Mon Nov 28 15:37:47 2016 obs J2014+5059_S_2014_05_31_pus_uva.fits ! Reading UV FITS file: J2014+5059_S_2014_05_31_pus_uva.fits ! AN table 1: 121 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.98641 visibilities/baseline/integration-bin. ! Found source: J2014+5059 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 21484 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2014+5059_S_2014_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.925471Jy sigma=0.011435 ! Fit after self-cal, rms=0.842820Jy sigma=0.010461 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.401 mas, bmaj=3.81 mas, bpa=-12.83 degrees ! Estimated noise=700.296 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.114636 Jy ! Component: 100 - total flux cleaned = 0.146359 Jy ! Total flux subtracted in 100 components = 0.146359 Jy ! Clean residual min=-0.012704 max=0.054930 Jy/beam ! Clean residual mean=-0.000055 rms=0.004108 Jy/beam ! Combined flux in latest and established models = 0.146359 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.146359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106754Jy sigma=0.001272 ! Fit after self-cal, rms=0.106764Jy sigma=0.001272 ! Inverting map ! Added new window around map position (7.5, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0445634 Jy ! Component: 100 - total flux cleaned = 0.0624251 Jy ! Total flux subtracted in 100 components = 0.0624251 Jy ! Clean residual min=-0.009782 max=0.023002 Jy/beam ! Clean residual mean=-0.000029 rms=0.002484 Jy/beam ! Combined flux in latest and established models = 0.208785 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 21 components and 0.208785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083710Jy sigma=0.000975 ! Fit after self-cal, rms=0.079064Jy sigma=0.000915 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.019568 Jy ! Component: 100 - total flux cleaned = 0.0291677 Jy ! Total flux subtracted in 100 components = 0.0291677 Jy ! Clean residual min=-0.005871 max=0.008676 Jy/beam ! Clean residual mean=-0.000014 rms=0.001303 Jy/beam ! Combined flux in latest and established models = 0.237952 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 38 components and 0.237952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072771Jy sigma=0.000837 ! Fit after self-cal, rms=0.072001Jy sigma=0.000827 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00898345 Jy ! Component: 100 - total flux cleaned = 0.0135126 Jy ! Total flux subtracted in 100 components = 0.0135126 Jy ! Clean residual min=-0.004588 max=0.004115 Jy/beam ! Clean residual mean=-0.000007 rms=0.000976 Jy/beam ! Combined flux in latest and established models = 0.251465 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 47 components and 0.251465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070478Jy sigma=0.000811 ! Fit after self-cal, rms=0.070340Jy sigma=0.000809 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.205 mas, bmaj=4.641 mas, bpa=-19.17 degrees ! Estimated noise=394.227 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00532726 Jy ! Component: 100 - total flux cleaned = 0.00704061 Jy ! Component: 150 - total flux cleaned = 0.00741855 Jy ! Component: 200 - total flux cleaned = 0.00772637 Jy ! Total flux subtracted in 200 components = 0.00772637 Jy ! Clean residual min=-0.003466 max=0.002652 Jy/beam ! Clean residual mean=-0.000008 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.259191 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 59 components and 0.259191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069841Jy sigma=0.000805 ! Fit after self-cal, rms=0.069781Jy sigma=0.000804 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.83 HN 0.97 KP 1.04 ! LA 1.18 MK 1.01 NL 0.96 OV 0.97 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.02 KP 1.01 ! LA 1.13 MK 1.03 NL 1.02 OV 1.02 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.14 HN 1.01 KP 0.92 ! LA 0.90 MK 1.06 NL 0.99 OV 0.94 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.97 HN 1.02 KP 0.89 ! LA 0.88 MK 1.05 NL 1.08 OV 1.01 ! PT 1.04 SC 1.00 ! ! ! Fit before self-cal, rms=0.069781Jy sigma=0.000804 ! Fit after self-cal, rms=0.066720Jy sigma=0.000772 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.245 mas, bmaj=4.667 mas, bpa=-17.95 degrees ! Estimated noise=396.365 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000476224 Jy ! Component: 100 - total flux cleaned = 0.000256319 Jy ! Component: 150 - total flux cleaned = 0.000152009 Jy ! Component: 200 - total flux cleaned = 0.000150823 Jy ! Total flux subtracted in 200 components = 0.000150823 Jy ! Clean residual min=-0.001558 max=0.001996 Jy/beam ! Clean residual mean=-0.000004 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.259342 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 71 components and 0.259342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066640Jy sigma=0.000771 ! Fit after self-cal, rms=0.066609Jy sigma=0.000771 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066609Jy sigma=0.000771 ! Fit after self-cal, rms=0.066371Jy sigma=0.000770 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.239 mas, bmaj=4.678 mas, bpa=-19.02 degrees ! Estimated noise=396.047 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000505852 Jy ! Component: 100 - total flux cleaned = 0.000336641 Jy ! Component: 150 - total flux cleaned = 0.000166291 Jy ! Component: 200 - total flux cleaned = 6.8668e-05 Jy ! Total flux subtracted in 200 components = 6.8668e-05 Jy ! Clean residual min=-0.001281 max=0.001628 Jy/beam ! Clean residual mean=0.000002 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.259411 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 77 components and 0.259411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066336Jy sigma=0.000770 ! Fit after self-cal, rms=0.066329Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000175986 Jy ! Component: 100 - total flux cleaned = 0.000125266 Jy ! Component: 150 - total flux cleaned = 5.59792e-05 Jy ! Component: 200 - total flux cleaned = 1.49838e-05 Jy ! Total flux subtracted in 200 components = 1.49838e-05 Jy ! Clean residual min=-0.001300 max=0.001409 Jy/beam ! Clean residual mean=0.000002 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.259426 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 78 components and 0.259426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066310Jy sigma=0.000770 ! Fit after self-cal, rms=0.066307Jy sigma=0.000770 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066307Jy sigma=0.000770 ! Fit after self-cal, rms=0.066230Jy sigma=0.000770 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.238 mas, bmaj=4.681 mas, bpa=-19.26 degrees ! Estimated noise=395.615 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000194965 Jy ! Component: 100 - total flux cleaned = 0.000150685 Jy ! Component: 150 - total flux cleaned = 0.000130904 Jy ! Component: 200 - total flux cleaned = 0.000111971 Jy ! Total flux subtracted in 200 components = 0.000111971 Jy ! Clean residual min=-0.001302 max=0.001334 Jy/beam ! Clean residual mean=0.000002 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 0.259538 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 81 components and 0.259538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066215Jy sigma=0.000769 ! Fit after self-cal, rms=0.066213Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.62337e-05 Jy ! Component: 100 - total flux cleaned = 5.95464e-05 Jy ! Component: 150 - total flux cleaned = 5.9831e-05 Jy ! Component: 200 - total flux cleaned = 6.00881e-05 Jy ! Total flux subtracted in 200 components = 6.00881e-05 Jy ! Clean residual min=-0.001321 max=0.001276 Jy/beam ! Clean residual mean=0.000002 rms=0.000324 Jy/beam ! Combined flux in latest and established models = 0.259598 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 82 components and 0.259598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066204Jy sigma=0.000769 ! Fit after self-cal, rms=0.066203Jy sigma=0.000769 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066203Jy sigma=0.000769 ! Fit after self-cal, rms=0.066145Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.275 mas, bmaj=8.575 mas, bpa=31.95 degrees ! Estimated noise=478.846 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000365422 Jy ! Component: 100 - total flux cleaned = 0.000380392 Jy ! Component: 150 - total flux cleaned = 0.000392007 Jy ! Component: 200 - total flux cleaned = 0.000401069 Jy ! Total flux subtracted in 200 components = 0.000401069 Jy ! Clean residual min=-0.001459 max=0.001405 Jy/beam ! Clean residual mean=0.000003 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 0.259999 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 92 components and 0.259999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066144Jy sigma=0.000769 ! Fit after self-cal, rms=0.066142Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.18331e-05 Jy ! Component: 100 - total flux cleaned = 4.30553e-05 Jy ! Component: 150 - total flux cleaned = 4.32902e-05 Jy ! Component: 200 - total flux cleaned = 5.17525e-05 Jy ! Total flux subtracted in 200 components = 5.17525e-05 Jy ! Clean residual min=-0.001460 max=0.001413 Jy/beam ! Clean residual mean=0.000003 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.260051 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 94 components and 0.260051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066141Jy sigma=0.000769 ! Fit after self-cal, rms=0.066140Jy sigma=0.000769 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.236 mas, bmaj=4.682 mas, bpa=-19.36 degrees ! Estimated noise=395.333 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.236 x 4.682 at -19.36 degrees (North through East) ! Clean map min=-0.0012902 max=0.14075 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.421 mas, bmaj=3.846 mas, bpa=-14.08 degrees ! Estimated noise=706.058 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.124227 Jy ! Component: 100 - total flux cleaned = 0.176209 Jy ! Component: 150 - total flux cleaned = 0.202894 Jy ! Component: 200 - total flux cleaned = 0.220123 Jy ! Total flux subtracted in 200 components = 0.220123 Jy ! Clean residual min=-0.003711 max=0.009349 Jy/beam ! Clean residual mean=-0.000014 rms=0.001135 Jy/beam ! Combined flux in latest and established models = 0.220123 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.220123 Jy ! Inverting map and beam ! Estimated beam: bmin=4.236 mas, bmaj=4.682 mas, bpa=-19.36 degrees ! Estimated noise=395.333 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0164291 Jy ! Component: 100 - total flux cleaned = 0.0255136 Jy ! Component: 150 - total flux cleaned = 0.0308101 Jy ! Component: 200 - total flux cleaned = 0.0340619 Jy ! Total flux subtracted in 200 components = 0.0340619 Jy ! Clean residual min=-0.001412 max=0.001696 Jy/beam ! Clean residual mean=-0.000002 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.254185 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 45 components and 0.254185 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020521 Jy ! Component: 100 - total flux cleaned = 0.00335972 Jy ! Component: 150 - total flux cleaned = 0.00421398 Jy ! Component: 200 - total flux cleaned = 0.00469254 Jy ! Total flux subtracted in 200 components = 0.00469254 Jy ! Clean residual min=-0.001310 max=0.001193 Jy/beam ! Clean residual mean=0.000001 rms=0.000311 Jy/beam ! Combined flux in latest and established models = 0.258877 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 55 components and 0.258877 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.275 mas, bmaj=8.575 mas, bpa=31.95 degrees ! Estimated noise=478.846 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000634695 Jy ! Component: 100 - total flux cleaned = 0.000990383 Jy ! Component: 150 - total flux cleaned = 0.00114709 Jy ! Component: 200 - total flux cleaned = 0.00119088 Jy ! Total flux subtracted in 200 components = 0.00119088 Jy ! Clean residual min=-0.001433 max=0.001407 Jy/beam ! Clean residual mean=0.000003 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.260068 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.542e-05 Jy ! Component: 100 - total flux cleaned = 6.04262e-05 Jy ! Component: 150 - total flux cleaned = 6.77009e-05 Jy ! Component: 200 - total flux cleaned = 7.12353e-05 Jy ! Total flux subtracted in 200 components = 7.12353e-05 Jy ! Clean residual min=-0.001434 max=0.001406 Jy/beam ! Clean residual mean=0.000003 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.26014 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 68 components and 0.26014 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.236 mas, bmaj=4.682 mas, bpa=-19.36 degrees ! Estimated noise=395.333 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000160328 Jy ! Component: 100 - total flux cleaned = -0.000200539 Jy ! Component: 150 - total flux cleaned = -0.000212259 Jy ! Component: 200 - total flux cleaned = -0.000223267 Jy ! Total flux subtracted in 200 components = -0.000223267 Jy ! Clean residual min=-0.001322 max=0.001237 Jy/beam ! Clean residual mean=0.000002 rms=0.000307 Jy/beam ! Combined flux in latest and established models = 0.259916 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 76 components and 0.259916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066106Jy sigma=0.000769 ! Fit after self-cal, rms=0.066100Jy sigma=0.000769 wmodel J2014+5059_S_2014_05_31_pus_map.mod ! Writing 76 model components to file: J2014+5059_S_2014_05_31_pus_map.mod wobs J2014+5059_S_2014_05_31_pus_uvs.fits ! Writing UV FITS file: J2014+5059_S_2014_05_31_pus_uvs.fits wwins J2014+5059_S_2014_05_31_pus_map.win ! wwins: Wrote 2 windows to J2014+5059_S_2014_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000388448 Jy ! Component: 100 - total flux cleaned = -0.000407844 Jy ! Component: 150 - total flux cleaned = -0.000448362 Jy ! Component: 200 - total flux cleaned = -0.000486824 Jy ! Component: 250 - total flux cleaned = -0.000487528 Jy ! Component: 300 - total flux cleaned = -0.000505715 Jy ! Component: 350 - total flux cleaned = -0.000523246 Jy ! Component: 400 - total flux cleaned = -0.000557408 Jy ! Component: 450 - total flux cleaned = -0.00057414 Jy ! Component: 500 - total flux cleaned = -0.000639198 Jy ! Component: 550 - total flux cleaned = -0.000670988 Jy ! Component: 600 - total flux cleaned = -0.000749154 Jy ! Component: 650 - total flux cleaned = -0.000825666 Jy ! Component: 700 - total flux cleaned = -0.000855707 Jy ! Component: 750 - total flux cleaned = -0.000900281 Jy ! Component: 800 - total flux cleaned = -0.000944086 Jy ! Component: 850 - total flux cleaned = -0.00100137 Jy ! Component: 900 - total flux cleaned = -0.00102933 Jy ! Component: 950 - total flux cleaned = -0.00100135 Jy ! Component: 1000 - total flux cleaned = -0.00104275 Jy ! Component: 1050 - total flux cleaned = -0.00109742 Jy ! Component: 1100 - total flux cleaned = -0.00112441 Jy ! Component: 1150 - total flux cleaned = -0.00117744 Jy ! Component: 1200 - total flux cleaned = -0.00116425 Jy ! Component: 1250 - total flux cleaned = -0.00126787 Jy ! Component: 1300 - total flux cleaned = -0.00124196 Jy ! Component: 1350 - total flux cleaned = -0.0012675 Jy ! Component: 1400 - total flux cleaned = -0.00131775 Jy ! Component: 1450 - total flux cleaned = -0.00135484 Jy ! Component: 1500 - total flux cleaned = -0.00136715 Jy ! Component: 1550 - total flux cleaned = -0.0014038 Jy ! Component: 1600 - total flux cleaned = -0.00147616 Jy ! Component: 1650 - total flux cleaned = -0.00151182 Jy ! Component: 1700 - total flux cleaned = -0.00148828 Jy ! Component: 1750 - total flux cleaned = -0.0015587 Jy ! Component: 1800 - total flux cleaned = -0.00162816 Jy ! Component: 1850 - total flux cleaned = -0.00166261 Jy ! Component: 1900 - total flux cleaned = -0.00170826 Jy ! Component: 1950 - total flux cleaned = -0.00177601 Jy ! Component: 2000 - total flux cleaned = -0.00179834 Jy ! Component: 2050 - total flux cleaned = -0.00184289 Jy ! Component: 2100 - total flux cleaned = -0.00193095 Jy ! Component: 2150 - total flux cleaned = -0.00197441 Jy ! Component: 2200 - total flux cleaned = -0.00199601 Jy ! Component: 2250 - total flux cleaned = -0.0020496 Jy ! Component: 2300 - total flux cleaned = -0.00210284 Jy ! Component: 2350 - total flux cleaned = -0.00215556 Jy ! Component: 2400 - total flux cleaned = -0.00218696 Jy ! Component: 2450 - total flux cleaned = -0.00220794 Jy ! Component: 2500 - total flux cleaned = -0.00226975 Jy ! Component: 2550 - total flux cleaned = -0.00231064 Jy ! Component: 2600 - total flux cleaned = -0.00231076 Jy ! Component: 2650 - total flux cleaned = -0.00239136 Jy ! Component: 2700 - total flux cleaned = -0.00243131 Jy ! Component: 2750 - total flux cleaned = -0.00250068 Jy ! Component: 2800 - total flux cleaned = -0.0025006 Jy ! Component: 2850 - total flux cleaned = -0.00253001 Jy ! Component: 2900 - total flux cleaned = -0.00258831 Jy ! Component: 2950 - total flux cleaned = -0.00264613 Jy ! Component: 3000 - total flux cleaned = -0.00274169 Jy ! Component: 3050 - total flux cleaned = -0.00274171 Jy ! Component: 3100 - total flux cleaned = -0.00279818 Jy ! Component: 3150 - total flux cleaned = -0.00283551 Jy ! Component: 3200 - total flux cleaned = -0.00284486 Jy ! Component: 3250 - total flux cleaned = -0.00289094 Jy ! Component: 3300 - total flux cleaned = -0.00290016 Jy ! Component: 3350 - total flux cleaned = -0.00295481 Jy ! Component: 3400 - total flux cleaned = -0.00297291 Jy ! Component: 3450 - total flux cleaned = -0.00299983 Jy ! Component: 3500 - total flux cleaned = -0.00308884 Jy ! Component: 3550 - total flux cleaned = -0.00306223 Jy ! Component: 3600 - total flux cleaned = -0.00309747 Jy ! Component: 3650 - total flux cleaned = -0.0031586 Jy ! Component: 3700 - total flux cleaned = -0.00314987 Jy ! Component: 3750 - total flux cleaned = -0.00317571 Jy ! Component: 3800 - total flux cleaned = -0.00322711 Jy ! Component: 3850 - total flux cleaned = -0.00326109 Jy ! Component: 3900 - total flux cleaned = -0.00326944 Jy ! Component: 3950 - total flux cleaned = -0.00330302 Jy ! Component: 4000 - total flux cleaned = -0.00331134 Jy ! Component: 4050 - total flux cleaned = -0.00331964 Jy ! Total flux subtracted in 4096 components = -0.00336093 Jy ! Clean residual min=-0.000599 max=0.000477 Jy/beam ! Clean residual mean=-0.000001 rms=0.000149 Jy/beam ! Combined flux in latest and established models = 0.256555 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 353 components and 0.256555 Jy ![Exited script file: muppet] wmap "J2014+5059_S_2014_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.236 x 4.682 at -19.36 degrees (North through East) ! Clean map min=-0.00094037 max=0.13972 Jy/beam ! Writing clean map to FITS file: J2014+5059_S_2014_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.139725 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000148726 device "J2014+5059_S_2014_05_31_pus\_map.eps/VPS" ! Attempting to open device: 'J2014+5059_S_2014_05_31_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.319327 0.319327 0.638655 1.27731 2.55462 5.10924 10.2185 20.437 40.8739 81.7478 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.139 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.236 x 4.682 at -19.36 degrees (North through East) ! Clean map min=-0.00094037 max=0.13972 Jy/beam quit ! Quitting program ! Log file J2014+5059_S_2014_05_31_pus_uvs.log closed on Mon Nov 28 15:37:52 2016