! Started logfile: J2012+4628_S_2014_08_09_pus_uvs.log on Tue Nov 29 23:14:39 2016 obs J2012+4628_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J2012+4628_S_2014_08_09_pus_uva.fits ! AN table 1: 112 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.457738 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2012+4628 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 9228 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2012+4628_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 400 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 400 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 344 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 344 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.864740Jy sigma=0.010087 ! Fit after self-cal, rms=0.849501Jy sigma=0.009898 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.226 mas, bmaj=11.36 mas, bpa=-48.39 degrees ! Estimated noise=1308.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.114746 Jy ! Component: 100 - total flux cleaned = 0.176433 Jy ! Total flux subtracted in 100 components = 0.176433 Jy ! Clean residual min=-0.020372 max=0.034618 Jy/beam ! Clean residual mean=0.000028 rms=0.007938 Jy/beam ! Combined flux in latest and established models = 0.176433 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 55 components and 0.176433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141584Jy sigma=0.001593 ! Fit after self-cal, rms=0.140832Jy sigma=0.001584 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.755 mas, bmaj=11.95 mas, bpa=-47.92 degrees ! Estimated noise=664.318 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0703499 Jy ! Component: 100 - total flux cleaned = 0.116299 Jy ! Component: 150 - total flux cleaned = 0.147345 Jy ! Component: 200 - total flux cleaned = 0.168762 Jy ! Total flux subtracted in 200 components = 0.168762 Jy ! Clean residual min=-0.011568 max=0.023575 Jy/beam ! Clean residual mean=-0.000009 rms=0.005112 Jy/beam ! Combined flux in latest and established models = 0.345194 Jy ! Performing phase self-cal ! Adding 70 model components to the UV plane model. ! The established model now contains 111 components and 0.345195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091368Jy sigma=0.000989 ! Fit after self-cal, rms=0.090551Jy sigma=0.000980 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.00* KP 1.02 ! LA 0.98 MK 1.00* NL 1.45 OV 1.27 ! PT 0.90 SC 1.24 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.12 HN 1.00* KP 0.99 ! LA 0.96 MK 1.00* NL 1.38 OV 1.25 ! PT 0.88 SC 1.20 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.79 FD 1.25 HN 1.00* KP 0.86 ! LA 0.75 MK 1.00* NL 1.31 OV 1.09 ! PT 0.88 SC 1.36 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.07 HN 1.00* KP 0.80 ! LA 0.73 MK 1.00* NL 1.18 OV 1.09 ! PT 0.89 SC 1.05 ! ! ! Fit before self-cal, rms=0.090551Jy sigma=0.000980 ! Fit after self-cal, rms=0.083110Jy sigma=0.000812 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.138 mas, bmaj=12.68 mas, bpa=-51.54 degrees ! Estimated noise=688.878 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0053271 Jy ! Component: 100 - total flux cleaned = -0.00535168 Jy ! Component: 150 - total flux cleaned = -0.00499642 Jy ! Component: 200 - total flux cleaned = -0.00484656 Jy ! Total flux subtracted in 200 components = -0.00484656 Jy ! Clean residual min=-0.006848 max=0.010669 Jy/beam ! Clean residual mean=-0.000019 rms=0.002368 Jy/beam ! Combined flux in latest and established models = 0.340348 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 116 components and 0.340348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082061Jy sigma=0.000799 ! Fit after self-cal, rms=0.082160Jy sigma=0.000798 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082160Jy sigma=0.000798 ! Fit after self-cal, rms=0.084881Jy sigma=0.000787 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.149 mas, bmaj=12.76 mas, bpa=-49.5 degrees ! Estimated noise=700.702 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0021268 Jy ! Component: 100 - total flux cleaned = -0.00247305 Jy ! Component: 150 - total flux cleaned = -0.00237115 Jy ! Component: 200 - total flux cleaned = -0.00236862 Jy ! Total flux subtracted in 200 components = -0.00236862 Jy ! Clean residual min=-0.006176 max=0.007253 Jy/beam ! Clean residual mean=0.000024 rms=0.001873 Jy/beam ! Combined flux in latest and established models = 0.337979 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 128 components and 0.337979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084571Jy sigma=0.000784 ! Fit after self-cal, rms=0.084583Jy sigma=0.000784 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.31485e-05 Jy ! Component: 100 - total flux cleaned = -0.000160195 Jy ! Component: 150 - total flux cleaned = -0.000159026 Jy ! Component: 200 - total flux cleaned = -0.000229406 Jy ! Total flux subtracted in 200 components = -0.000229406 Jy ! Clean residual min=-0.005894 max=0.007128 Jy/beam ! Clean residual mean=0.000023 rms=0.001823 Jy/beam ! Combined flux in latest and established models = 0.33775 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 133 components and 0.33775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084443Jy sigma=0.000782 ! Fit after self-cal, rms=0.084440Jy sigma=0.000782 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084440Jy sigma=0.000782 ! Fit after self-cal, rms=0.086651Jy sigma=0.000782 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.259 mas, bmaj=12.82 mas, bpa=-49.2 degrees ! Estimated noise=707.883 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00121726 Jy ! Component: 100 - total flux cleaned = -0.00121899 Jy ! Component: 150 - total flux cleaned = -0.00129252 Jy ! Component: 200 - total flux cleaned = -0.00129282 Jy ! Total flux subtracted in 200 components = -0.00129282 Jy ! Clean residual min=-0.005293 max=0.006989 Jy/beam ! Clean residual mean=0.000029 rms=0.001778 Jy/beam ! Combined flux in latest and established models = 0.336457 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 139 components and 0.336457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086474Jy sigma=0.000780 ! Fit after self-cal, rms=0.086469Jy sigma=0.000780 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.76502e-05 Jy ! Component: 100 - total flux cleaned = -6.79356e-05 Jy ! Component: 150 - total flux cleaned = -0.000132157 Jy ! Component: 200 - total flux cleaned = -0.000132259 Jy ! Total flux subtracted in 200 components = -0.000132259 Jy ! Clean residual min=-0.005108 max=0.006889 Jy/beam ! Clean residual mean=0.000029 rms=0.001741 Jy/beam ! Combined flux in latest and established models = 0.336325 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 142 components and 0.336325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086370Jy sigma=0.000779 ! Fit after self-cal, rms=0.086368Jy sigma=0.000779 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086368Jy sigma=0.000779 ! Fit after self-cal, rms=0.088155Jy sigma=0.000779 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.88 mas, bmaj=14.18 mas, bpa=-53.26 degrees ! Estimated noise=702.456 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000134183 Jy ! Component: 100 - total flux cleaned = 0.00014088 Jy ! Component: 150 - total flux cleaned = 0.000150589 Jy ! Component: 200 - total flux cleaned = 0.000157082 Jy ! Total flux subtracted in 200 components = 0.000157082 Jy ! Clean residual min=-0.004954 max=0.006544 Jy/beam ! Clean residual mean=0.000036 rms=0.001718 Jy/beam ! Combined flux in latest and established models = 0.336482 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 153 components and 0.336482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088105Jy sigma=0.000777 ! Fit after self-cal, rms=0.088074Jy sigma=0.000777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.37887e-05 Jy ! Component: 100 - total flux cleaned = -3.18846e-05 Jy ! Component: 150 - total flux cleaned = -8.28959e-05 Jy ! Component: 200 - total flux cleaned = -8.37201e-05 Jy ! Total flux subtracted in 200 components = -8.37201e-05 Jy ! Clean residual min=-0.004979 max=0.006335 Jy/beam ! Clean residual mean=0.000036 rms=0.001679 Jy/beam ! Combined flux in latest and established models = 0.336398 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 155 components and 0.336398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088041Jy sigma=0.000777 ! Fit after self-cal, rms=0.088031Jy sigma=0.000777 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=8.36 mas, bmaj=12.85 mas, bpa=-49.19 degrees ! Estimated noise=712.304 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.36 x 12.85 at -49.19 degrees (North through East) ! Clean map min=-0.0087491 max=0.16933 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.465 mas, bmaj=11.81 mas, bpa=-49.64 degrees ! Estimated noise=1422.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.124144 Jy ! Component: 100 - total flux cleaned = 0.187227 Jy ! Component: 150 - total flux cleaned = 0.229862 Jy ! Component: 200 - total flux cleaned = 0.260262 Jy ! Total flux subtracted in 200 components = 0.260262 Jy ! Clean residual min=-0.014500 max=0.018971 Jy/beam ! Clean residual mean=0.000035 rms=0.004707 Jy/beam ! Combined flux in latest and established models = 0.260262 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 57 model components to the UV plane model. ! The established model now contains 57 components and 0.260262 Jy ! Inverting map and beam ! Estimated beam: bmin=8.36 mas, bmaj=12.85 mas, bpa=-49.19 degrees ! Estimated noise=712.304 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, 8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0307553 Jy ! Component: 100 - total flux cleaned = 0.050019 Jy ! Component: 150 - total flux cleaned = 0.0626068 Jy ! Component: 200 - total flux cleaned = 0.0711224 Jy ! Total flux subtracted in 200 components = 0.0711224 Jy ! Clean residual min=-0.007930 max=0.010752 Jy/beam ! Clean residual mean=0.000036 rms=0.002226 Jy/beam ! Combined flux in latest and established models = 0.331384 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 119 components and 0.331384 Jy ! Inverting map ! Added new window around map position (9, -13.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00980543 Jy ! Component: 100 - total flux cleaned = 0.0125742 Jy ! Component: 150 - total flux cleaned = 0.0140306 Jy ! Component: 200 - total flux cleaned = 0.0144047 Jy ! Total flux subtracted in 200 components = 0.0144047 Jy ! Clean residual min=-0.005104 max=0.004628 Jy/beam ! Clean residual mean=0.000042 rms=0.001512 Jy/beam ! Combined flux in latest and established models = 0.345789 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 161 components and 0.345789 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.88 mas, bmaj=14.18 mas, bpa=-53.26 degrees ! Estimated noise=702.456 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000168334 Jy ! Component: 100 - total flux cleaned = 0.000167288 Jy ! Component: 150 - total flux cleaned = 0.000163746 Jy ! Component: 200 - total flux cleaned = -6.75149e-05 Jy ! Total flux subtracted in 200 components = -6.75149e-05 Jy ! Clean residual min=-0.004264 max=0.004091 Jy/beam ! Clean residual mean=0.000050 rms=0.001342 Jy/beam ! Combined flux in latest and established models = 0.345721 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000216819 Jy ! Component: 100 - total flux cleaned = -0.000514771 Jy ! Component: 150 - total flux cleaned = -0.000791932 Jy ! Component: 200 - total flux cleaned = -0.000965403 Jy ! Total flux subtracted in 200 components = -0.000965403 Jy ! Clean residual min=-0.004170 max=0.003711 Jy/beam ! Clean residual mean=0.000045 rms=0.001227 Jy/beam ! Combined flux in latest and established models = 0.344756 Jy ! Adding 87 model components to the UV plane model. ! The established model now contains 239 components and 0.344756 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=8.36 mas, bmaj=12.85 mas, bpa=-49.19 degrees ! Estimated noise=712.304 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102875 Jy ! Component: 100 - total flux cleaned = -0.0012168 Jy ! Component: 150 - total flux cleaned = -0.00121838 Jy ! Component: 200 - total flux cleaned = -0.00138425 Jy ! Total flux subtracted in 200 components = -0.00138425 Jy ! Clean residual min=-0.003721 max=0.003361 Jy/beam ! Clean residual mean=0.000031 rms=0.001074 Jy/beam ! Combined flux in latest and established models = 0.343371 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 268 components and 0.343371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086633Jy sigma=0.000763 ! Fit after self-cal, rms=0.086494Jy sigma=0.000762 wmodel J2012+4628_S_2014_08_09_pus_map.mod ! Writing 268 model components to file: J2012+4628_S_2014_08_09_pus_map.mod wobs J2012+4628_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J2012+4628_S_2014_08_09_pus_uvs.fits wwins J2012+4628_S_2014_08_09_pus_map.win ! wwins: Wrote 3 windows to J2012+4628_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00134966 Jy ! Component: 100 - total flux cleaned = -0.00224817 Jy ! Component: 150 - total flux cleaned = -0.00291059 Jy ! Component: 200 - total flux cleaned = -0.00306464 Jy ! Component: 250 - total flux cleaned = -0.00330985 Jy ! Component: 300 - total flux cleaned = -0.00368202 Jy ! Component: 350 - total flux cleaned = -0.00377229 Jy ! Component: 400 - total flux cleaned = -0.0039004 Jy ! Component: 450 - total flux cleaned = -0.00364997 Jy ! Component: 500 - total flux cleaned = -0.00365079 Jy ! Component: 550 - total flux cleaned = -0.00349564 Jy ! Component: 600 - total flux cleaned = -0.00330812 Jy ! Component: 650 - total flux cleaned = -0.00312615 Jy ! Component: 700 - total flux cleaned = -0.00298491 Jy ! Component: 750 - total flux cleaned = -0.00284685 Jy ! Component: 800 - total flux cleaned = -0.00271391 Jy ! Component: 850 - total flux cleaned = -0.00264872 Jy ! Component: 900 - total flux cleaned = -0.00268025 Jy ! Component: 950 - total flux cleaned = -0.0026477 Jy ! Component: 1000 - total flux cleaned = -0.00255592 Jy ! Component: 1050 - total flux cleaned = -0.00258565 Jy ! Component: 1100 - total flux cleaned = -0.00258535 Jy ! Component: 1150 - total flux cleaned = -0.00261472 Jy ! Component: 1200 - total flux cleaned = -0.00267194 Jy ! Component: 1250 - total flux cleaned = -0.00275579 Jy ! Component: 1300 - total flux cleaned = -0.00283705 Jy ! Component: 1350 - total flux cleaned = -0.00281026 Jy ! Component: 1400 - total flux cleaned = -0.00283666 Jy ! Component: 1450 - total flux cleaned = -0.00278543 Jy ! Component: 1500 - total flux cleaned = -0.00281105 Jy ! Component: 1550 - total flux cleaned = -0.00286064 Jy ! Component: 1600 - total flux cleaned = -0.00281155 Jy ! Component: 1650 - total flux cleaned = -0.00285995 Jy ! Component: 1700 - total flux cleaned = -0.00297844 Jy ! Component: 1750 - total flux cleaned = -0.0029782 Jy ! Component: 1800 - total flux cleaned = -0.00307093 Jy ! Component: 1850 - total flux cleaned = -0.00318455 Jy ! Component: 1900 - total flux cleaned = -0.003252 Jy ! Component: 1950 - total flux cleaned = -0.00336276 Jy ! Component: 2000 - total flux cleaned = -0.00342836 Jy ! Component: 2050 - total flux cleaned = -0.00360093 Jy ! Component: 2100 - total flux cleaned = -0.0036858 Jy ! Component: 2150 - total flux cleaned = -0.00376994 Jy ! Component: 2200 - total flux cleaned = -0.0038946 Jy ! Component: 2250 - total flux cleaned = -0.00401785 Jy ! Component: 2300 - total flux cleaned = -0.00411931 Jy ! Component: 2350 - total flux cleaned = -0.00421978 Jy ! Component: 2400 - total flux cleaned = -0.00431911 Jy ! Component: 2450 - total flux cleaned = -0.0043781 Jy ! Component: 2500 - total flux cleaned = -0.00449471 Jy ! Component: 2550 - total flux cleaned = -0.0045719 Jy ! Component: 2600 - total flux cleaned = -0.0046675 Jy ! Component: 2650 - total flux cleaned = -0.0047435 Jy ! Component: 2700 - total flux cleaned = -0.00489401 Jy ! Component: 2750 - total flux cleaned = -0.00498714 Jy ! Component: 2800 - total flux cleaned = -0.00507974 Jy ! Component: 2850 - total flux cleaned = -0.00519015 Jy ! Component: 2900 - total flux cleaned = -0.00533629 Jy ! Component: 2950 - total flux cleaned = -0.00540883 Jy ! Component: 3000 - total flux cleaned = -0.00553491 Jy ! Component: 3050 - total flux cleaned = -0.00564235 Jy ! Component: 3100 - total flux cleaned = -0.00574899 Jy ! Component: 3150 - total flux cleaned = -0.00581957 Jy ! Component: 3200 - total flux cleaned = -0.0059075 Jy ! Component: 3250 - total flux cleaned = -0.00606461 Jy ! Component: 3300 - total flux cleaned = -0.00615144 Jy ! Component: 3350 - total flux cleaned = -0.00625491 Jy ! Component: 3400 - total flux cleaned = -0.00632358 Jy ! Component: 3450 - total flux cleaned = -0.00642602 Jy ! Component: 3500 - total flux cleaned = -0.00652759 Jy ! Component: 3550 - total flux cleaned = -0.0066287 Jy ! Component: 3600 - total flux cleaned = -0.00672931 Jy ! Component: 3650 - total flux cleaned = -0.00682929 Jy ! Component: 3700 - total flux cleaned = -0.00689563 Jy ! Component: 3750 - total flux cleaned = -0.00697818 Jy ! Component: 3800 - total flux cleaned = -0.00707674 Jy ! Component: 3850 - total flux cleaned = -0.0071585 Jy ! Component: 3900 - total flux cleaned = -0.0072398 Jy ! Component: 3950 - total flux cleaned = -0.00735314 Jy ! Component: 4000 - total flux cleaned = -0.00740145 Jy ! Component: 4050 - total flux cleaned = -0.00751374 Jy ! Total flux subtracted in 4096 components = -0.00757772 Jy ! Clean residual min=-0.000966 max=0.000915 Jy/beam ! Clean residual mean=-0.000001 rms=0.000324 Jy/beam ! Combined flux in latest and established models = 0.335794 Jy keep ! Adding 347 model components to the UV plane model. ! The established model now contains 614 components and 0.335793 Jy ![Exited script file: muppet] wmap "J2012+4628_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.36 x 12.85 at -49.19 degrees (North through East) ! Clean map min=-0.0047424 max=0.16995 Jy/beam ! Writing clean map to FITS file: J2012+4628_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.169948 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000326342 device "J2012+4628_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J2012+4628_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.576075 0.576075 1.15215 2.3043 4.6086 9.21719 18.4344 36.8688 73.7375 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.169 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.36 x 12.85 at -49.19 degrees (North through East) ! Clean map min=-0.0047424 max=0.16995 Jy/beam quit ! Quitting program ! Log file J2012+4628_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 23:14:45 2016