! Started logfile: J2011-1546_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:34:28 2017 obs J2011-1546_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J2011-1546_S_2015_01_23_pus_uva.fits ! AN table 1: 28 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.631746 visibilities/baseline/integration-bin. ! Found source: J2011-1546 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 3184 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2011-1546_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.883327Jy sigma=0.008474 ! Fit after self-cal, rms=0.473625Jy sigma=0.004567 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.615 mas, bmaj=7.129 mas, bpa=1.618 degrees ! Estimated noise=1606.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.438494 Jy ! Component: 100 - total flux cleaned = 0.543766 Jy ! Total flux subtracted in 100 components = 0.543766 Jy ! Clean residual min=-0.029094 max=0.041297 Jy/beam ! Clean residual mean=0.000116 rms=0.008367 Jy/beam ! Combined flux in latest and established models = 0.543765 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.543765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254864Jy sigma=0.002319 ! Fit after self-cal, rms=0.254857Jy sigma=0.002319 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.126 mas, bmaj=8.337 mas, bpa=2.728 degrees ! Estimated noise=1325.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0652051 Jy ! Component: 100 - total flux cleaned = 0.0975922 Jy ! Component: 150 - total flux cleaned = 0.115464 Jy ! Component: 200 - total flux cleaned = 0.125853 Jy ! Total flux subtracted in 200 components = 0.125853 Jy ! Clean residual min=-0.027253 max=0.038896 Jy/beam ! Clean residual mean=0.000113 rms=0.008544 Jy/beam ! Combined flux in latest and established models = 0.669618 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 51 components and 0.669618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236500Jy sigma=0.002177 ! Fit after self-cal, rms=0.236495Jy sigma=0.002177 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 1.00 KP 1.04 ! LA 1.12 MK 1.07 NL 1.13 OV 0.90 ! PT 1.01 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 1.04 KP 0.96 ! LA 1.08 MK 1.03 NL 1.42 OV 0.91 ! PT 1.01 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* HN 1.02 KP 0.83 ! LA 0.86 MK 1.04 NL 1.36 OV 0.85 ! PT 0.97 SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00* HN 0.98 KP 0.75 ! LA 0.90 MK 1.02 NL 1.03 OV 0.89 ! PT 1.00 SC 0.97 ! ! ! Fit before self-cal, rms=0.236495Jy sigma=0.002177 ! Fit after self-cal, rms=0.206879Jy sigma=0.001935 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.154 mas, bmaj=8.487 mas, bpa=2.947 degrees ! Estimated noise=1332.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00220441 Jy ! Component: 100 - total flux cleaned = -0.00182587 Jy ! Component: 150 - total flux cleaned = -0.00159823 Jy ! Component: 200 - total flux cleaned = -0.00139519 Jy ! Total flux subtracted in 200 components = -0.00139519 Jy ! Clean residual min=-0.022124 max=0.017096 Jy/beam ! Clean residual mean=0.000099 rms=0.004980 Jy/beam ! Combined flux in latest and established models = 0.668223 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 61 components and 0.668223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206708Jy sigma=0.001934 ! Fit after self-cal, rms=0.206808Jy sigma=0.001933 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206808Jy sigma=0.001933 ! Fit after self-cal, rms=0.196985Jy sigma=0.001848 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.154 mas, bmaj=8.505 mas, bpa=3.012 degrees ! Estimated noise=1340.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00173061 Jy ! Component: 100 - total flux cleaned = 0.00213463 Jy ! Component: 150 - total flux cleaned = 0.00222163 Jy ! Component: 200 - total flux cleaned = 0.0024511 Jy ! Total flux subtracted in 200 components = 0.0024511 Jy ! Clean residual min=-0.010497 max=0.008896 Jy/beam ! Clean residual mean=0.000035 rms=0.002347 Jy/beam ! Combined flux in latest and established models = 0.670674 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 70 components and 0.670674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196878Jy sigma=0.001847 ! Fit after self-cal, rms=0.196918Jy sigma=0.001847 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000158568 Jy ! Component: 100 - total flux cleaned = 0.000414568 Jy ! Component: 150 - total flux cleaned = 0.000471004 Jy ! Component: 200 - total flux cleaned = 0.000622508 Jy ! Total flux subtracted in 200 components = 0.000622508 Jy ! Clean residual min=-0.010604 max=0.008886 Jy/beam ! Clean residual mean=0.000035 rms=0.002340 Jy/beam ! Combined flux in latest and established models = 0.671296 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 72 components and 0.671296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196872Jy sigma=0.001847 ! Fit after self-cal, rms=0.196874Jy sigma=0.001847 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196874Jy sigma=0.001847 ! Fit after self-cal, rms=0.197122Jy sigma=0.001840 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.16 mas, bmaj=8.529 mas, bpa=3.04 degrees ! Estimated noise=1341 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00212774 Jy ! Component: 100 - total flux cleaned = -0.00236472 Jy ! Component: 150 - total flux cleaned = -0.00250868 Jy ! Component: 200 - total flux cleaned = -0.00251144 Jy ! Total flux subtracted in 200 components = -0.00251144 Jy ! Clean residual min=-0.006749 max=0.007912 Jy/beam ! Clean residual mean=0.000005 rms=0.001818 Jy/beam ! Combined flux in latest and established models = 0.668785 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 74 components and 0.668785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197059Jy sigma=0.001840 ! Fit after self-cal, rms=0.197074Jy sigma=0.001840 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-14.5, 110). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00613364 Jy ! Component: 100 - total flux cleaned = 0.00588761 Jy ! Component: 150 - total flux cleaned = 0.0057746 Jy ! Component: 200 - total flux cleaned = 0.00595459 Jy ! Total flux subtracted in 200 components = 0.00595459 Jy ! Clean residual min=-0.006330 max=0.007677 Jy/beam ! Clean residual mean=0.000006 rms=0.001690 Jy/beam ! Combined flux in latest and established models = 0.674739 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 89 components and 0.674739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196840Jy sigma=0.001838 ! Fit after self-cal, rms=0.196830Jy sigma=0.001838 ! Inverting map ! Added new window around map position (-9.5, 56.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00657376 Jy ! Component: 100 - total flux cleaned = 0.00909866 Jy ! Component: 150 - total flux cleaned = 0.0111678 Jy ! Component: 200 - total flux cleaned = 0.013026 Jy ! Total flux subtracted in 200 components = 0.013026 Jy ! Clean residual min=-0.005867 max=0.005906 Jy/beam ! Clean residual mean=0.000008 rms=0.001490 Jy/beam ! Combined flux in latest and established models = 0.687765 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 110 components and 0.687766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196575Jy sigma=0.001835 ! Fit after self-cal, rms=0.196569Jy sigma=0.001835 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196569Jy sigma=0.001835 ! Fit after self-cal, rms=0.196303Jy sigma=0.001835 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.547 mas, bmaj=15.69 mas, bpa=0.2156 degrees ! Estimated noise=1660.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00328631 Jy ! Component: 100 - total flux cleaned = 0.0046302 Jy ! Component: 150 - total flux cleaned = 0.00522485 Jy ! Component: 200 - total flux cleaned = 0.00567971 Jy ! Total flux subtracted in 200 components = 0.00567971 Jy ! Clean residual min=-0.007694 max=0.005969 Jy/beam ! Clean residual mean=0.000003 rms=0.002061 Jy/beam ! Combined flux in latest and established models = 0.693445 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 137 components and 0.693445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196280Jy sigma=0.001834 ! Fit after self-cal, rms=0.196283Jy sigma=0.001834 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000423987 Jy ! Component: 100 - total flux cleaned = 0.000910438 Jy ! Component: 150 - total flux cleaned = 0.00113061 Jy ! Component: 200 - total flux cleaned = 0.00129473 Jy ! Total flux subtracted in 200 components = 0.00129473 Jy ! Clean residual min=-0.007625 max=0.005763 Jy/beam ! Clean residual mean=0.000003 rms=0.002018 Jy/beam ! Combined flux in latest and established models = 0.69474 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 149 components and 0.69474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196280Jy sigma=0.001834 ! Fit after self-cal, rms=0.196282Jy sigma=0.001834 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.166 mas, bmaj=8.545 mas, bpa=2.994 degrees ! Estimated noise=1338.08 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.166 x 8.545 at 2.994 degrees (North through East) ! Clean map min=-0.0058933 max=0.58151 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196282Jy sigma=0.001834 ! Fit after self-cal, rms=0.128392Jy sigma=0.000902 ! Inverting map and beam ! Estimated beam: bmin=3.166 mas, bmaj=8.54 mas, bpa=2.918 degrees ! Estimated noise=1336.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000747265 Jy ! Component: 100 - total flux cleaned = -0.00131136 Jy ! Component: 150 - total flux cleaned = -0.00206206 Jy ! Component: 200 - total flux cleaned = -0.002813 Jy ! Total flux subtracted in 200 components = -0.002813 Jy ! Clean residual min=-0.004473 max=0.004729 Jy/beam ! Clean residual mean=0.000005 rms=0.001162 Jy/beam ! Combined flux in latest and established models = 0.691927 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 170 components and 0.691927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128275Jy sigma=0.000900 ! Fit after self-cal, rms=0.128269Jy sigma=0.000900 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00049367 Jy ! Component: 100 - total flux cleaned = -0.00107723 Jy ! Component: 150 - total flux cleaned = -0.00125602 Jy ! Component: 200 - total flux cleaned = -0.00153371 Jy ! Total flux subtracted in 200 components = -0.00153371 Jy ! Clean residual min=-0.004554 max=0.004630 Jy/beam ! Clean residual mean=0.000004 rms=0.001150 Jy/beam ! Combined flux in latest and established models = 0.690394 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 180 components and 0.690393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128204Jy sigma=0.000900 ! Fit after self-cal, rms=0.128200Jy sigma=0.000900 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128200Jy sigma=0.000900 ! Fit after self-cal, rms=0.128303Jy sigma=0.000900 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.627 mas, bmaj=7.246 mas, bpa=2.001 degrees ! Estimated noise=1642.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.447905 Jy ! Component: 100 - total flux cleaned = 0.550693 Jy ! Component: 150 - total flux cleaned = 0.592264 Jy ! Component: 200 - total flux cleaned = 0.615747 Jy ! Total flux subtracted in 200 components = 0.615747 Jy ! Clean residual min=-0.008356 max=0.011699 Jy/beam ! Clean residual mean=0.000023 rms=0.002318 Jy/beam ! Combined flux in latest and established models = 0.615748 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.615748 Jy ! Inverting map and beam ! Estimated beam: bmin=3.168 mas, bmaj=8.545 mas, bpa=2.934 degrees ! Estimated noise=1336.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0210911 Jy ! Component: 100 - total flux cleaned = 0.0321123 Jy ! Component: 150 - total flux cleaned = 0.0394047 Jy ! Component: 200 - total flux cleaned = 0.0447514 Jy ! Total flux subtracted in 200 components = 0.0447514 Jy ! Clean residual min=-0.005616 max=0.007105 Jy/beam ! Clean residual mean=0.000009 rms=0.001509 Jy/beam ! Combined flux in latest and established models = 0.660499 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 68 components and 0.660499 Jy ! Inverting map ! Added new window around map position (29, -34.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00569314 Jy ! Component: 100 - total flux cleaned = 0.00846429 Jy ! Component: 150 - total flux cleaned = 0.0110598 Jy ! Component: 200 - total flux cleaned = 0.0134145 Jy ! Total flux subtracted in 200 components = 0.0134145 Jy ! Clean residual min=-0.004884 max=0.004632 Jy/beam ! Clean residual mean=0.000004 rms=0.001278 Jy/beam ! Combined flux in latest and established models = 0.673914 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 98 components and 0.673914 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.551 mas, bmaj=15.72 mas, bpa=0.2225 degrees ! Estimated noise=1657.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00366627 Jy ! Component: 100 - total flux cleaned = 0.00602546 Jy ! Component: 150 - total flux cleaned = 0.00726715 Jy ! Component: 200 - total flux cleaned = 0.00840709 Jy ! Total flux subtracted in 200 components = 0.00840709 Jy ! Clean residual min=-0.006096 max=0.005267 Jy/beam ! Clean residual mean=0.000001 rms=0.001579 Jy/beam ! Combined flux in latest and established models = 0.682321 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00094281 Jy ! Component: 100 - total flux cleaned = 0.00156701 Jy ! Component: 150 - total flux cleaned = 0.00193911 Jy ! Component: 200 - total flux cleaned = 0.00218865 Jy ! Total flux subtracted in 200 components = 0.00218865 Jy ! Clean residual min=-0.005759 max=0.004989 Jy/beam ! Clean residual mean=0.000000 rms=0.001529 Jy/beam ! Combined flux in latest and established models = 0.684509 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 133 components and 0.684509 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.168 mas, bmaj=8.545 mas, bpa=2.934 degrees ! Estimated noise=1336.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000392342 Jy ! Component: 100 - total flux cleaned = -0.000476402 Jy ! Component: 150 - total flux cleaned = -0.00039792 Jy ! Component: 200 - total flux cleaned = -0.000326847 Jy ! Total flux subtracted in 200 components = -0.000326847 Jy ! Clean residual min=-0.004357 max=0.004533 Jy/beam ! Clean residual mean=0.000001 rms=0.001152 Jy/beam ! Combined flux in latest and established models = 0.684182 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 155 components and 0.684182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128234Jy sigma=0.000899 ! Fit after self-cal, rms=0.128187Jy sigma=0.000898 wmodel J2011-1546_S_2015_01_23_pus_map.mod ! Writing 155 model components to file: J2011-1546_S_2015_01_23_pus_map.mod wobs J2011-1546_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J2011-1546_S_2015_01_23_pus_uvs.fits wwins J2011-1546_S_2015_01_23_pus_map.win ! wwins: Wrote 4 windows to J2011-1546_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -4.90955e-05 Jy ! Component: 100 - total flux cleaned = -4.96156e-05 Jy ! Component: 150 - total flux cleaned = 0.000156362 Jy ! Component: 200 - total flux cleaned = 0.000219845 Jy ! Component: 250 - total flux cleaned = 0.000281215 Jy ! Component: 300 - total flux cleaned = 0.000342083 Jy ! Component: 350 - total flux cleaned = 0.000461786 Jy ! Component: 400 - total flux cleaned = 0.000518456 Jy ! Component: 450 - total flux cleaned = 0.000629773 Jy ! Component: 500 - total flux cleaned = 0.00073796 Jy ! Component: 550 - total flux cleaned = 0.000578557 Jy ! Component: 600 - total flux cleaned = 0.000683638 Jy ! Component: 650 - total flux cleaned = 0.000734164 Jy ! Component: 700 - total flux cleaned = 0.000832892 Jy ! Component: 750 - total flux cleaned = 0.000736577 Jy ! Component: 800 - total flux cleaned = 0.000829136 Jy ! Component: 850 - total flux cleaned = 0.00082954 Jy ! Component: 900 - total flux cleaned = 0.000920427 Jy ! Component: 950 - total flux cleaned = 0.00109757 Jy ! Component: 1000 - total flux cleaned = 0.00105379 Jy ! Component: 1050 - total flux cleaned = 0.00105354 Jy ! Component: 1100 - total flux cleaned = 0.00117941 Jy ! Component: 1150 - total flux cleaned = 0.00126176 Jy ! Component: 1200 - total flux cleaned = 0.00130241 Jy ! Component: 1250 - total flux cleaned = 0.00146195 Jy ! Component: 1300 - total flux cleaned = 0.00157915 Jy ! Component: 1350 - total flux cleaned = 0.00173316 Jy ! Component: 1400 - total flux cleaned = 0.00177151 Jy ! Component: 1450 - total flux cleaned = 0.00199482 Jy ! Component: 1500 - total flux cleaned = 0.00199398 Jy ! Component: 1550 - total flux cleaned = 0.00202976 Jy ! Component: 1600 - total flux cleaned = 0.00206548 Jy ! Component: 1650 - total flux cleaned = 0.00213543 Jy ! Component: 1700 - total flux cleaned = 0.00213525 Jy ! Component: 1750 - total flux cleaned = 0.00220324 Jy ! Component: 1800 - total flux cleaned = 0.00216929 Jy ! Component: 1850 - total flux cleaned = 0.00223587 Jy ! Component: 1900 - total flux cleaned = 0.0022681 Jy ! Component: 1950 - total flux cleaned = 0.00223598 Jy ! Component: 2000 - total flux cleaned = 0.0022998 Jy ! Component: 2050 - total flux cleaned = 0.00233155 Jy ! Component: 2100 - total flux cleaned = 0.00239404 Jy ! Component: 2150 - total flux cleaned = 0.00251776 Jy ! Component: 2200 - total flux cleaned = 0.00251775 Jy ! Component: 2250 - total flux cleaned = 0.00260801 Jy ! Component: 2300 - total flux cleaned = 0.00260833 Jy ! Component: 2350 - total flux cleaned = 0.00269683 Jy ! Component: 2400 - total flux cleaned = 0.00272611 Jy ! Component: 2450 - total flux cleaned = 0.00281234 Jy ! Component: 2500 - total flux cleaned = 0.00284065 Jy ! Component: 2550 - total flux cleaned = 0.00284085 Jy ! Component: 2600 - total flux cleaned = 0.00289646 Jy ! Component: 2650 - total flux cleaned = 0.0029789 Jy ! Component: 2700 - total flux cleaned = 0.00300581 Jy ! Component: 2750 - total flux cleaned = 0.00300558 Jy ! Component: 2800 - total flux cleaned = 0.00303225 Jy ! Component: 2850 - total flux cleaned = 0.0031642 Jy ! Component: 2900 - total flux cleaned = 0.00324228 Jy ! Component: 2950 - total flux cleaned = 0.0032682 Jy ! Component: 3000 - total flux cleaned = 0.00337064 Jy ! Component: 3050 - total flux cleaned = 0.00339611 Jy ! Component: 3100 - total flux cleaned = 0.00354715 Jy ! Component: 3150 - total flux cleaned = 0.00354697 Jy ! Component: 3200 - total flux cleaned = 0.00359659 Jy ! Component: 3250 - total flux cleaned = 0.00369477 Jy ! Component: 3300 - total flux cleaned = 0.00374353 Jy ! Component: 3350 - total flux cleaned = 0.00379181 Jy ! Component: 3400 - total flux cleaned = 0.00386326 Jy ! Component: 3450 - total flux cleaned = 0.00393416 Jy ! Component: 3500 - total flux cleaned = 0.00398091 Jy ! Component: 3550 - total flux cleaned = 0.0039813 Jy ! Component: 3600 - total flux cleaned = 0.00405055 Jy ! Component: 3650 - total flux cleaned = 0.00411891 Jy ! Component: 3700 - total flux cleaned = 0.00411897 Jy ! Component: 3750 - total flux cleaned = 0.00409679 Jy ! Component: 3800 - total flux cleaned = 0.00414157 Jy ! Component: 3850 - total flux cleaned = 0.00416374 Jy ! Component: 3900 - total flux cleaned = 0.00427384 Jy ! Component: 3950 - total flux cleaned = 0.00438295 Jy ! Component: 4000 - total flux cleaned = 0.00436121 Jy ! Component: 4050 - total flux cleaned = 0.00446863 Jy ! Total flux subtracted in 4096 components = 0.00455402 Jy ! Clean residual min=-0.001247 max=0.001186 Jy/beam ! Clean residual mean=-0.000001 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.688736 Jy keep ! Adding 347 model components to the UV plane model. ! The established model now contains 502 components and 0.688736 Jy ![Exited script file: muppet] wmap "J2011-1546_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.168 x 8.545 at 2.934 degrees (North through East) ! Clean map min=-0.002459 max=0.5856 Jy/beam ! Writing clean map to FITS file: J2011-1546_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.585598 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000404078 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.207008 0.207008 0.414015 0.828031 1.65606 3.31212 6.62425 13.2485 26.497 52.994 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.585 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.168 x 8.545 at 2.934 degrees (North through East) ! Clean map min=-0.002459 max=0.5856 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2011-1546_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:34:33 2017