! Started logfile: J2010+3322_S_2014_06_09_pus_uvs.log on Wed Nov 16 17:13:45 2016
obs J2010+3322_S_2014_06_09_pus_uva.fits
! Reading UV FITS file: J2010+3322_S_2014_06_09_pus_uva.fits
! AN table 1: 113 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.623206 visibilities/baseline/integration-bin.
! Found source: J2010+3322
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 336 lines of history.
! 
! Reading 12676 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J2010+3322_S_2014_06_09_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 234 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 234 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 234 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 234 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.957215Jy  sigma=0.011913
! Fit after  self-cal, rms=0.852549Jy  sigma=0.010690
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.827 mas, bmaj=7.773 mas, bpa=10.75 degrees
! Estimated noise=758.347 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.167923 Jy
! Component: 100  -  total flux cleaned = 0.2898 Jy
! Total flux subtracted in 100 components = 0.2898 Jy
! Clean residual min=-0.036386 max=0.072509 Jy/beam
! Clean residual mean=-0.001220 rms=0.020965 Jy/beam
! Combined flux in latest and established models = 0.2898 Jy
! Performing phase self-cal
! Adding 89 model components to the UV plane model.
! The established model now contains 89 components and 0.2898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.373729Jy  sigma=0.005004
! Fit after  self-cal, rms=0.372926Jy  sigma=0.004996
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.801 mas, bmaj=8.344 mas, bpa=9.196 degrees
! Estimated noise=498.765 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.186834 Jy
! Component: 100  -  total flux cleaned = 0.328461 Jy
! Component: 150  -  total flux cleaned = 0.44052 Jy
! Component: 200  -  total flux cleaned = 0.531838 Jy
! Total flux subtracted in 200 components = 0.531838 Jy
! Clean residual min=-0.037570 max=0.054973 Jy/beam
! Clean residual mean=-0.001310 rms=0.020833 Jy/beam
! Combined flux in latest and established models = 0.821638 Jy
! Performing phase self-cal
! Adding 178 model components to the UV plane model.
! The established model now contains 259 components and 0.821638 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.210138Jy  sigma=0.002758
! Fit after  self-cal, rms=0.209422Jy  sigma=0.002749
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.91     HN        0.75     KP        0.99     
!   LA        0.99     MK        1.11     NL        2.80     OV        1.71     
!   PT        0.67     SC        1.15     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.05     HN        0.81     KP        0.95     
!   LA        0.94     MK        1.08     NL        2.83     OV        1.68     
!   PT        0.66     SC        1.12     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.18     HN        0.83     KP        0.85     
!   LA        0.74     MK        1.09     NL        2.40     OV        1.47     
!   PT        0.65     SC        1.08     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.97     HN        0.89     KP        0.79     
!   LA        0.70     MK        1.01     NL        2.00     OV        1.44     
!   PT        0.69     SC        0.86     
! 
! 
! Fit before self-cal, rms=0.209422Jy  sigma=0.002749
! Fit after  self-cal, rms=0.113728Jy  sigma=0.001062
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.826 mas, bmaj=8.298 mas, bpa=8.434 degrees
! Estimated noise=501.527 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0103418 Jy
! Component: 100  -  total flux cleaned = -0.0152924 Jy
! Component: 150  -  total flux cleaned = -0.0193249 Jy
! Component: 200  -  total flux cleaned = -0.0208147 Jy
! Total flux subtracted in 200 components = -0.0208147 Jy
! Clean residual min=-0.005867 max=0.005880 Jy/beam
! Clean residual mean=0.000206 rms=0.002523 Jy/beam
! Combined flux in latest and established models = 0.800823 Jy
! Performing phase self-cal
! Adding 77 model components to the UV plane model.
! The established model now contains 336 components and 0.800823 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110587Jy  sigma=0.001011
! Fit after  self-cal, rms=0.111281Jy  sigma=0.001007
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111281Jy  sigma=0.001007
! Fit after  self-cal, rms=0.107902Jy  sigma=0.000929
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.759 mas, bmaj=8.014 mas, bpa=8.704 degrees
! Estimated noise=483.324 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00486508 Jy
! Component: 100  -  total flux cleaned = -0.00854677 Jy
! Component: 150  -  total flux cleaned = -0.00913023 Jy
! Component: 200  -  total flux cleaned = -0.00836882 Jy
! Total flux subtracted in 200 components = -0.00836882 Jy
! Clean residual min=-0.004138 max=0.004120 Jy/beam
! Clean residual mean=0.000127 rms=0.001884 Jy/beam
! Combined flux in latest and established models = 0.792454 Jy
selfcal
! Performing phase self-cal
! Adding 90 model components to the UV plane model.
! The established model now contains 419 components and 0.792454 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106106Jy  sigma=0.000895
! Fit after  self-cal, rms=0.105931Jy  sigma=0.000894
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0012083 Jy
! Component: 100  -  total flux cleaned = 0.00253549 Jy
! Component: 150  -  total flux cleaned = 0.00456876 Jy
! Component: 200  -  total flux cleaned = 0.00550594 Jy
! Total flux subtracted in 200 components = 0.00550594 Jy
! Clean residual min=-0.003045 max=0.003037 Jy/beam
! Clean residual mean=0.000105 rms=0.001449 Jy/beam
! Combined flux in latest and established models = 0.79796 Jy
! Performing phase self-cal
! Adding 101 model components to the UV plane model.
! The established model now contains 498 components and 0.79796 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105042Jy  sigma=0.000879
! Fit after  self-cal, rms=0.104890Jy  sigma=0.000879
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104890Jy  sigma=0.000879
! Fit after  self-cal, rms=0.105596Jy  sigma=0.000874
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.779 mas, bmaj=7.867 mas, bpa=8.95 degrees
! Estimated noise=478.574 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0022732 Jy
! Component: 100  -  total flux cleaned = -0.00207088 Jy
! Component: 150  -  total flux cleaned = -0.00189791 Jy
! Component: 200  -  total flux cleaned = -0.00192124 Jy
! Total flux subtracted in 200 components = -0.00192124 Jy
! Clean residual min=-0.002501 max=0.002494 Jy/beam
! Clean residual mean=0.000062 rms=0.001206 Jy/beam
! Combined flux in latest and established models = 0.796039 Jy
selfcal
! Performing phase self-cal
! Adding 81 model components to the UV plane model.
! The established model now contains 556 components and 0.796039 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105004Jy  sigma=0.000862
! Fit after  self-cal, rms=0.104915Jy  sigma=0.000862
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000924769 Jy
! Component: 100  -  total flux cleaned = 0.00189158 Jy
! Component: 150  -  total flux cleaned = 0.00240613 Jy
! Component: 200  -  total flux cleaned = 0.00326641 Jy
! Total flux subtracted in 200 components = 0.00326641 Jy
! Clean residual min=-0.001980 max=0.001985 Jy/beam
! Clean residual mean=0.000063 rms=0.000973 Jy/beam
! Combined flux in latest and established models = 0.799306 Jy
! Performing phase self-cal
! Adding 83 model components to the UV plane model.
! The established model now contains 602 components and 0.799306 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104553Jy  sigma=0.000856
! Fit after  self-cal, rms=0.104451Jy  sigma=0.000856
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104451Jy  sigma=0.000856
! Fit after  self-cal, rms=0.104524Jy  sigma=0.000854
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.36 mas, bmaj=10.6 mas, bpa=-14.56 degrees
! Estimated noise=568.678 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00189659 Jy
! Component: 100  -  total flux cleaned = -0.00171938 Jy
! Component: 150  -  total flux cleaned = -0.00077472 Jy
! Component: 200  -  total flux cleaned = 7.75133e-05 Jy
! Total flux subtracted in 200 components = 7.75133e-05 Jy
! Clean residual min=-0.002231 max=0.002257 Jy/beam
! Clean residual mean=0.000069 rms=0.001167 Jy/beam
! Combined flux in latest and established models = 0.799383 Jy
selfcal
! Performing phase self-cal
! Adding 92 model components to the UV plane model.
! The established model now contains 675 components and 0.799383 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104204Jy  sigma=0.000847
! Fit after  self-cal, rms=0.104163Jy  sigma=0.000847
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011915 Jy
! Component: 100  -  total flux cleaned = 0.00277872 Jy
! Component: 150  -  total flux cleaned = 0.00368522 Jy
! Component: 200  -  total flux cleaned = 0.00452523 Jy
! Total flux subtracted in 200 components = 0.00452523 Jy
! Clean residual min=-0.001693 max=0.001683 Jy/beam
! Clean residual mean=0.000067 rms=0.000870 Jy/beam
! Combined flux in latest and established models = 0.803908 Jy
! Performing phase self-cal
! Adding 87 model components to the UV plane model.
! The established model now contains 739 components and 0.803908 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103978Jy  sigma=0.000844
! Fit after  self-cal, rms=0.103937Jy  sigma=0.000844
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.779 mas, bmaj=7.814 mas, bpa=9.102 degrees
! Estimated noise=475.338 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.779 x 7.814 at 9.102 degrees (North through East)
! Clean map  min=-0.012578  max=0.094755 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.759 mas, bmaj=7.431 mas, bpa=10.16 degrees
! Estimated noise=764.269 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.169495 Jy
! Component: 100  -  total flux cleaned = 0.285964 Jy
! Component: 150  -  total flux cleaned = 0.373517 Jy
! Component: 200  -  total flux cleaned = 0.443666 Jy
! Total flux subtracted in 200 components = 0.443666 Jy
! Clean residual min=-0.025508 max=0.042295 Jy/beam
! Clean residual mean=-0.000623 rms=0.012465 Jy/beam
! Combined flux in latest and established models = 0.443666 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 153 model components to the UV plane model.
! The established model now contains 153 components and 0.443666 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.779 mas, bmaj=7.814 mas, bpa=9.102 degrees
! Estimated noise=475.338 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0998768 Jy
! Component: 100  -  total flux cleaned = 0.17099 Jy
! Component: 150  -  total flux cleaned = 0.22348 Jy
! Component: 200  -  total flux cleaned = 0.263045 Jy
! Total flux subtracted in 200 components = 0.263045 Jy
! Clean residual min=-0.020094 max=0.022824 Jy/beam
! Clean residual mean=-0.000350 rms=0.008449 Jy/beam
! Combined flux in latest and established models = 0.706712 Jy
! Adding 157 model components to the UV plane model.
! The established model now contains 304 components and 0.706711 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.36 mas, bmaj=10.6 mas, bpa=-14.56 degrees
! Estimated noise=568.678 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.037103 Jy
! Component: 100  -  total flux cleaned = 0.0320398 Jy
! Component: 150  -  total flux cleaned = 0.0236141 Jy
! Component: 200  -  total flux cleaned = 0.0185704 Jy
! Total flux subtracted in 200 components = 0.0185704 Jy
! Clean residual min=-0.011991 max=0.011865 Jy/beam
! Clean residual mean=-0.000053 rms=0.005726 Jy/beam
! Combined flux in latest and established models = 0.725282 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0039836 Jy
! Component: 100  -  total flux cleaned = -0.00662016 Jy
! Component: 150  -  total flux cleaned = -0.00969184 Jy
! Component: 200  -  total flux cleaned = -0.0111911 Jy
! Total flux subtracted in 200 components = -0.0111911 Jy
! Clean residual min=-0.005886 max=0.005904 Jy/beam
! Clean residual mean=0.000098 rms=0.003035 Jy/beam
! Combined flux in latest and established models = 0.714091 Jy
! Adding 223 model components to the UV plane model.
! The established model now contains 516 components and 0.714091 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.779 mas, bmaj=7.814 mas, bpa=9.102 degrees
! Estimated noise=475.338 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000286851 Jy
! Component: 100  -  total flux cleaned = 0.000391058 Jy
! Component: 150  -  total flux cleaned = 0.000811065 Jy
! Component: 200  -  total flux cleaned = 0.00254818 Jy
! Total flux subtracted in 200 components = 0.00254818 Jy
! Clean residual min=-0.003103 max=0.003084 Jy/beam
! Clean residual mean=0.000017 rms=0.001367 Jy/beam
! Combined flux in latest and established models = 0.716639 Jy
selfcal
! Performing phase self-cal
! Adding 59 model components to the UV plane model.
! The established model now contains 575 components and 0.716639 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106532Jy  sigma=0.000867
! Fit after  self-cal, rms=0.105314Jy  sigma=0.000861
wmodel J2010+3322_S_2014_06_09_pus_map.mod
! Writing 575 model components to file: J2010+3322_S_2014_06_09_pus_map.mod
wobs J2010+3322_S_2014_06_09_pus_uvs.fits
! Writing UV FITS file: J2010+3322_S_2014_06_09_pus_uvs.fits
wwins J2010+3322_S_2014_06_09_pus_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: muppet]
! 
wmap "J2010+3322_S_2014_06_09_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.779 x 7.814 at 9.102 degrees (North through East)
! Clean map  min=-0.015714  max=0.11023 Jy/beam
! Writing clean map to FITS file: J2010+3322_S_2014_06_09_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.110226 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00128991 
device "J2010+3322_S_2014_06_09_pus\_map.eps/VPS"
! Attempting to open device: 'J2010+3322_S_2014_06_09_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -3.51072 3.51072 7.02145 14.0429 28.0858 56.1716
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0038 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.11 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.779 x 7.814 at 9.102 degrees (North through East)
! Clean map  min=-0.015714  max=0.11023 Jy/beam
quit
! Quitting program
! Log file J2010+3322_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 17:13:47 2016