! Started logfile: J2009+0727_S_2014_08_09_pus_uvs.log on Tue Nov 29 23:14:29 2016 obs J2009+0727_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J2009+0727_S_2014_08_09_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.791621 visibilities/baseline/integration-bin. ! Found source: J2009+0727 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 17384 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2009+0727_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 128 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 128 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 128 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 128 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.970538Jy sigma=0.010908 ! Fit after self-cal, rms=0.942584Jy sigma=0.010629 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.51 mas, bmaj=8.911 mas, bpa=16.69 degrees ! Estimated noise=808.568 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0434918 Jy ! Component: 100 - total flux cleaned = 0.0541878 Jy ! Total flux subtracted in 100 components = 0.0541878 Jy ! Clean residual min=-0.003244 max=0.004224 Jy/beam ! Clean residual mean=-0.000007 rms=0.000909 Jy/beam ! Combined flux in latest and established models = 0.0541878 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0541878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091123Jy sigma=0.000774 ! Fit after self-cal, rms=0.091040Jy sigma=0.000773 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.243 mas, bmaj=9.692 mas, bpa=15.98 degrees ! Estimated noise=491.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00577752 Jy ! Component: 100 - total flux cleaned = 0.00865203 Jy ! Component: 150 - total flux cleaned = 0.0104318 Jy ! Component: 200 - total flux cleaned = 0.011562 Jy ! Total flux subtracted in 200 components = 0.011562 Jy ! Clean residual min=-0.002224 max=0.002605 Jy/beam ! Clean residual mean=-0.000004 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.0657498 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 40 components and 0.0657498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090406Jy sigma=0.000770 ! Fit after self-cal, rms=0.090398Jy sigma=0.000769 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.84 HN 1.00 KP 1.09 ! LA 1.04 MK 1.00* NL 0.76 OV 1.01 ! PT 1.03 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.96 HN 1.04 KP 1.04 ! LA 1.04 MK 1.00* NL 0.91 OV 1.07 ! PT 1.07 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.11 HN 1.08 KP 0.91 ! LA 0.85 MK 1.00* NL 0.99 OV 0.96 ! PT 1.03 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.96 HN 1.08 KP 0.93 ! LA 0.79 MK 1.00* NL 1.15 OV 1.07 ! PT 1.05 SC 1.00 ! ! ! Fit before self-cal, rms=0.090398Jy sigma=0.000769 ! Fit after self-cal, rms=0.081499Jy sigma=0.000765 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.284 mas, bmaj=9.772 mas, bpa=16.07 degrees ! Estimated noise=494.883 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000638323 Jy ! Component: 100 - total flux cleaned = 0.000760228 Jy ! Component: 150 - total flux cleaned = 0.000760713 Jy ! Component: 200 - total flux cleaned = 0.000744152 Jy ! Total flux subtracted in 200 components = 0.000744152 Jy ! Clean residual min=-0.002175 max=0.002707 Jy/beam ! Clean residual mean=-0.000004 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.0664939 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.0664939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081469Jy sigma=0.000765 ! Fit after self-cal, rms=0.081382Jy sigma=0.000765 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081382Jy sigma=0.000765 ! Fit after self-cal, rms=0.073920Jy sigma=0.000762 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.299 mas, bmaj=9.792 mas, bpa=16.14 degrees ! Estimated noise=493.868 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.61298e-05 Jy ! Component: 100 - total flux cleaned = 8.22431e-05 Jy ! Component: 150 - total flux cleaned = 0.00010425 Jy ! Component: 200 - total flux cleaned = 0.000114017 Jy ! Total flux subtracted in 200 components = 0.000114017 Jy ! Clean residual min=-0.001722 max=0.002628 Jy/beam ! Clean residual mean=-0.000001 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.066608 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 53 components and 0.0666079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073916Jy sigma=0.000762 ! Fit after self-cal, rms=0.073871Jy sigma=0.000762 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 24). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267677 Jy ! Component: 100 - total flux cleaned = 0.00432858 Jy ! Component: 150 - total flux cleaned = 0.00544392 Jy ! Component: 200 - total flux cleaned = 0.00621377 Jy ! Total flux subtracted in 200 components = 0.00621377 Jy ! Clean residual min=-0.001666 max=0.001589 Jy/beam ! Clean residual mean=-0.000001 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.0728217 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 91 components and 0.0728217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073772Jy sigma=0.000761 ! Fit after self-cal, rms=0.073752Jy sigma=0.000761 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073752Jy sigma=0.000761 ! Fit after self-cal, rms=0.073267Jy sigma=0.000761 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.309 mas, bmaj=9.801 mas, bpa=16.1 degrees ! Estimated noise=490.803 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109697 Jy ! Component: 100 - total flux cleaned = 0.00175765 Jy ! Component: 150 - total flux cleaned = 0.00203032 Jy ! Component: 200 - total flux cleaned = 0.00208763 Jy ! Total flux subtracted in 200 components = 0.00208763 Jy ! Clean residual min=-0.001552 max=0.001531 Jy/beam ! Clean residual mean=0.000000 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.0749094 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 112 components and 0.0749094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073247Jy sigma=0.000760 ! Fit after self-cal, rms=0.073244Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000517567 Jy ! Component: 100 - total flux cleaned = 0.000573394 Jy ! Component: 150 - total flux cleaned = 0.000623111 Jy ! Component: 200 - total flux cleaned = 0.000638548 Jy ! Total flux subtracted in 200 components = 0.000638548 Jy ! Clean residual min=-0.001543 max=0.001500 Jy/beam ! Clean residual mean=0.000000 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 0.0755479 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 130 components and 0.0755479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073236Jy sigma=0.000760 ! Fit after self-cal, rms=0.073235Jy sigma=0.000760 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073235Jy sigma=0.000760 ! Fit after self-cal, rms=0.073069Jy sigma=0.000760 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.057 mas, bmaj=11.68 mas, bpa=8.096 degrees ! Estimated noise=548.465 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000266102 Jy ! Component: 100 - total flux cleaned = 0.000311505 Jy ! Component: 150 - total flux cleaned = 0.000324511 Jy ! Component: 200 - total flux cleaned = 0.000314328 Jy ! Total flux subtracted in 200 components = 0.000314328 Jy ! Clean residual min=-0.001478 max=0.001366 Jy/beam ! Clean residual mean=0.000001 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.0758622 Jy selfcal ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 170 components and 0.0758623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073067Jy sigma=0.000760 ! Fit after self-cal, rms=0.073067Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.87601e-05 Jy ! Component: 100 - total flux cleaned = 0.000105991 Jy ! Component: 150 - total flux cleaned = 9.73319e-05 Jy ! Component: 200 - total flux cleaned = 9.78676e-05 Jy ! Total flux subtracted in 200 components = 9.78676e-05 Jy ! Clean residual min=-0.001482 max=0.001341 Jy/beam ! Clean residual mean=0.000001 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.0759601 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 183 components and 0.0759601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073066Jy sigma=0.000760 ! Fit after self-cal, rms=0.073066Jy sigma=0.000760 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.309 mas, bmaj=9.804 mas, bpa=16.12 degrees ! Estimated noise=489.826 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.309 x 9.804 at 16.12 degrees (North through East) ! Clean map min=-0.001454 max=0.057763 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.552 mas, bmaj=9.039 mas, bpa=16.7 degrees ! Estimated noise=816.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0438055 Jy ! Component: 100 - total flux cleaned = 0.0546441 Jy ! Component: 150 - total flux cleaned = 0.0591958 Jy ! Component: 200 - total flux cleaned = 0.0621757 Jy ! Total flux subtracted in 200 components = 0.0621757 Jy ! Clean residual min=-0.002553 max=0.003185 Jy/beam ! Clean residual mean=-0.000003 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.0621757 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.0621757 Jy ! Inverting map and beam ! Estimated beam: bmin=4.309 mas, bmaj=9.804 mas, bpa=16.12 degrees ! Estimated noise=489.826 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00341064 Jy ! Component: 100 - total flux cleaned = 0.00579134 Jy ! Component: 150 - total flux cleaned = 0.00764263 Jy ! Component: 200 - total flux cleaned = 0.00912894 Jy ! Total flux subtracted in 200 components = 0.00912894 Jy ! Clean residual min=-0.001548 max=0.001588 Jy/beam ! Clean residual mean=-0.000000 rms=0.000411 Jy/beam ! Combined flux in latest and established models = 0.0713046 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 64 components and 0.0713046 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.057 mas, bmaj=11.68 mas, bpa=8.096 degrees ! Estimated noise=548.465 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160006 Jy ! Component: 100 - total flux cleaned = 0.00272459 Jy ! Component: 150 - total flux cleaned = 0.00333385 Jy ! Component: 200 - total flux cleaned = 0.00368745 Jy ! Total flux subtracted in 200 components = 0.00368745 Jy ! Clean residual min=-0.001503 max=0.001403 Jy/beam ! Clean residual mean=0.000000 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.0749921 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000183545 Jy ! Component: 100 - total flux cleaned = 0.000343367 Jy ! Component: 150 - total flux cleaned = 0.000466608 Jy ! Component: 200 - total flux cleaned = 0.000590405 Jy ! Total flux subtracted in 200 components = 0.000590405 Jy ! Clean residual min=-0.001504 max=0.001369 Jy/beam ! Clean residual mean=0.000001 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.0755825 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 118 components and 0.0755825 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.309 mas, bmaj=9.804 mas, bpa=16.12 degrees ! Estimated noise=489.826 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000568094 Jy ! Component: 100 - total flux cleaned = 0.000746245 Jy ! Component: 150 - total flux cleaned = 0.000803083 Jy ! Component: 200 - total flux cleaned = 0.000854357 Jy ! Total flux subtracted in 200 components = 0.000854357 Jy ! Clean residual min=-0.001487 max=0.001508 Jy/beam ! Clean residual mean=0.000000 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.0764368 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 136 components and 0.0764368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073078Jy sigma=0.000760 ! Fit after self-cal, rms=0.073075Jy sigma=0.000760 wmodel J2009+0727_S_2014_08_09_pus_map.mod ! Writing 136 model components to file: J2009+0727_S_2014_08_09_pus_map.mod wobs J2009+0727_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J2009+0727_S_2014_08_09_pus_uvs.fits wwins J2009+0727_S_2014_08_09_pus_map.win ! wwins: Wrote 2 windows to J2009+0727_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000193877 Jy ! Component: 100 - total flux cleaned = -0.000320069 Jy ! Component: 150 - total flux cleaned = -0.000367081 Jy ! Component: 200 - total flux cleaned = -0.000433849 Jy ! Component: 250 - total flux cleaned = -0.000433373 Jy ! Component: 300 - total flux cleaned = -0.00045332 Jy ! Component: 350 - total flux cleaned = -0.000433362 Jy ! Component: 400 - total flux cleaned = -0.000509327 Jy ! Component: 450 - total flux cleaned = -0.000620306 Jy ! Component: 500 - total flux cleaned = -0.000747307 Jy ! Component: 550 - total flux cleaned = -0.000870871 Jy ! Component: 600 - total flux cleaned = -0.000940353 Jy ! Component: 650 - total flux cleaned = -0.00104201 Jy ! Component: 700 - total flux cleaned = -0.00109198 Jy ! Component: 750 - total flux cleaned = -0.00112484 Jy ! Component: 800 - total flux cleaned = -0.00117272 Jy ! Component: 850 - total flux cleaned = -0.0011886 Jy ! Component: 900 - total flux cleaned = -0.00121891 Jy ! Component: 950 - total flux cleaned = -0.00121895 Jy ! Component: 1000 - total flux cleaned = -0.00124872 Jy ! Component: 1050 - total flux cleaned = -0.00130673 Jy ! Component: 1100 - total flux cleaned = -0.00133524 Jy ! Component: 1150 - total flux cleaned = -0.00136363 Jy ! Component: 1200 - total flux cleaned = -0.00137731 Jy ! Component: 1250 - total flux cleaned = -0.00141831 Jy ! Component: 1300 - total flux cleaned = -0.00140475 Jy ! Component: 1350 - total flux cleaned = -0.00139156 Jy ! Component: 1400 - total flux cleaned = -0.00141753 Jy ! Component: 1450 - total flux cleaned = -0.0013788 Jy ! Component: 1500 - total flux cleaned = -0.0013915 Jy ! Component: 1550 - total flux cleaned = -0.00135399 Jy ! Component: 1600 - total flux cleaned = -0.0013912 Jy ! Component: 1650 - total flux cleaned = -0.00133002 Jy ! Component: 1700 - total flux cleaned = -0.0013422 Jy ! Component: 1750 - total flux cleaned = -0.00134213 Jy ! Component: 1800 - total flux cleaned = -0.00135409 Jy ! Component: 1850 - total flux cleaned = -0.00133066 Jy ! Component: 1900 - total flux cleaned = -0.00131909 Jy ! Component: 1950 - total flux cleaned = -0.00130777 Jy ! Component: 2000 - total flux cleaned = -0.00128518 Jy ! Component: 2050 - total flux cleaned = -0.00130767 Jy ! Component: 2100 - total flux cleaned = -0.0012742 Jy ! Component: 2150 - total flux cleaned = -0.00125206 Jy ! Component: 2200 - total flux cleaned = -0.001252 Jy ! Component: 2250 - total flux cleaned = -0.00124121 Jy ! Component: 2300 - total flux cleaned = -0.00123049 Jy ! Component: 2350 - total flux cleaned = -0.00123053 Jy ! Component: 2400 - total flux cleaned = -0.00125146 Jy ! Component: 2450 - total flux cleaned = -0.00124094 Jy ! Component: 2500 - total flux cleaned = -0.00118932 Jy ! Component: 2550 - total flux cleaned = -0.00119971 Jy ! Component: 2600 - total flux cleaned = -0.00124037 Jy ! Component: 2650 - total flux cleaned = -0.0012102 Jy ! Component: 2700 - total flux cleaned = -0.00127019 Jy ! Component: 2750 - total flux cleaned = -0.00130985 Jy ! Component: 2800 - total flux cleaned = -0.00130992 Jy ! Component: 2850 - total flux cleaned = -0.00136862 Jy ! Component: 2900 - total flux cleaned = -0.00140746 Jy ! Component: 2950 - total flux cleaned = -0.00146532 Jy ! Component: 3000 - total flux cleaned = -0.0015035 Jy ! Component: 3050 - total flux cleaned = -0.00152243 Jy ! Component: 3100 - total flux cleaned = -0.00153194 Jy ! Component: 3150 - total flux cleaned = -0.00156943 Jy ! Component: 3200 - total flux cleaned = -0.00164377 Jy ! Component: 3250 - total flux cleaned = -0.00168993 Jy ! Component: 3300 - total flux cleaned = -0.0017082 Jy ! Component: 3350 - total flux cleaned = -0.00177213 Jy ! Component: 3400 - total flux cleaned = -0.00179939 Jy ! Component: 3450 - total flux cleaned = -0.00183539 Jy ! Component: 3500 - total flux cleaned = -0.00188912 Jy ! Component: 3550 - total flux cleaned = -0.00195132 Jy ! Component: 3600 - total flux cleaned = -0.00199551 Jy ! Component: 3650 - total flux cleaned = -0.00201306 Jy ! Component: 3700 - total flux cleaned = -0.00206544 Jy ! Component: 3750 - total flux cleaned = -0.00211753 Jy ! Component: 3800 - total flux cleaned = -0.00210888 Jy ! Component: 3850 - total flux cleaned = -0.00215181 Jy ! Component: 3900 - total flux cleaned = -0.002186 Jy ! Component: 3950 - total flux cleaned = -0.00220303 Jy ! Component: 4000 - total flux cleaned = -0.00223687 Jy ! Component: 4050 - total flux cleaned = -0.00228725 Jy ! Total flux subtracted in 4096 components = -0.00232069 Jy ! Clean residual min=-0.000443 max=0.000550 Jy/beam ! Clean residual mean=0.000001 rms=0.000158 Jy/beam ! Combined flux in latest and established models = 0.0741161 Jy keep ! Adding 262 model components to the UV plane model. ! The established model now contains 398 components and 0.0741162 Jy ![Exited script file: muppet] wmap "J2009+0727_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.309 x 9.804 at 16.12 degrees (North through East) ! Clean map min=-0.0011279 max=0.057532 Jy/beam ! Writing clean map to FITS file: J2009+0727_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0575319 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000156865 device "J2009+0727_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J2009+0727_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.81797 0.81797 1.63594 3.27188 6.54376 13.0875 26.175 52.3501 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.057 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.309 x 9.804 at 16.12 degrees (North through East) ! Clean map min=-0.0011279 max=0.057532 Jy/beam quit ! Quitting program ! Log file J2009+0727_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 23:14:34 2016