! Started logfile: J2007+6607_S_2014_12_20_pus_uvs.log on Wed Dec 28 13:44:26 2016 obs J2007+6607_S_2014_12_20_pus_uva.fits ! Reading UV FITS file: J2007+6607_S_2014_12_20_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.975794 visibilities/baseline/integration-bin. ! Found source: J2007+6607 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 344 lines of history. ! ! Reading 9836 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2007+6607_S_2014_12_20_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.757785Jy sigma=0.008358 ! Fit after self-cal, rms=0.739161Jy sigma=0.008147 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.884 mas, bmaj=4.832 mas, bpa=86.42 degrees ! Estimated noise=986.025 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.194514 Jy ! Component: 100 - total flux cleaned = 0.251582 Jy ! Total flux subtracted in 100 components = 0.251582 Jy ! Clean residual min=-0.011758 max=0.025622 Jy/beam ! Clean residual mean=-0.000075 rms=0.003389 Jy/beam ! Combined flux in latest and established models = 0.251582 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.251582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107300Jy sigma=0.001102 ! Fit after self-cal, rms=0.107076Jy sigma=0.001100 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0289868 Jy ! Component: 100 - total flux cleaned = 0.0440442 Jy ! Total flux subtracted in 100 components = 0.0440442 Jy ! Clean residual min=-0.010440 max=0.020370 Jy/beam ! Clean residual mean=-0.000059 rms=0.002469 Jy/beam ! Combined flux in latest and established models = 0.295626 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 16 components and 0.295626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095491Jy sigma=0.000975 ! Fit after self-cal, rms=0.095420Jy sigma=0.000974 ! Inverting map ! Added new window around map position (-3, -6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179507 Jy ! Component: 100 - total flux cleaned = 0.0267962 Jy ! Total flux subtracted in 100 components = 0.0267962 Jy ! Clean residual min=-0.009005 max=0.009818 Jy/beam ! Clean residual mean=-0.000047 rms=0.002005 Jy/beam ! Combined flux in latest and established models = 0.322423 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 32 components and 0.322423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090977Jy sigma=0.000929 ! Fit after self-cal, rms=0.090495Jy sigma=0.000924 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.568 mas, bmaj=5.854 mas, bpa=83.59 degrees ! Estimated noise=655.872 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103301 Jy ! Component: 100 - total flux cleaned = 0.016295 Jy ! Component: 150 - total flux cleaned = 0.0204761 Jy ! Component: 200 - total flux cleaned = 0.0235343 Jy ! Total flux subtracted in 200 components = 0.0235343 Jy ! Clean residual min=-0.009315 max=0.012725 Jy/beam ! Clean residual mean=-0.000083 rms=0.002447 Jy/beam ! Combined flux in latest and established models = 0.345957 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 64 components and 0.345957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088795Jy sigma=0.000913 ! Fit after self-cal, rms=0.088689Jy sigma=0.000912 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.89 HN 0.97 KP 1.09 ! LA 0.93 MK 1.01 NL 0.99 OV 0.95 ! PT 1.07 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.05 HN 1.01 KP 1.03 ! LA 0.91 MK 1.00 NL 1.10 OV 1.00 ! PT 1.06 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.19 HN 0.99 KP 0.94 ! LA 0.73 MK 1.01 NL 1.26 OV 0.91 ! PT 1.05 SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.04 HN 0.95 KP 0.89 ! LA 0.78 MK 0.99 NL 1.02 OV 0.98 ! PT 1.08 SC 1.00 ! ! ! Fit before self-cal, rms=0.088689Jy sigma=0.000912 ! Fit after self-cal, rms=0.077931Jy sigma=0.000817 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.584 mas, bmaj=5.87 mas, bpa=83.65 degrees ! Estimated noise=655.189 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-22.5, -34). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115783 Jy ! Component: 100 - total flux cleaned = 0.0187943 Jy ! Component: 150 - total flux cleaned = 0.0238977 Jy ! Component: 200 - total flux cleaned = 0.0277016 Jy ! Total flux subtracted in 200 components = 0.0277016 Jy ! Clean residual min=-0.004150 max=0.004057 Jy/beam ! Clean residual mean=-0.000034 rms=0.000962 Jy/beam ! Combined flux in latest and established models = 0.373658 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 120 components and 0.373658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076079Jy sigma=0.000793 ! Fit after self-cal, rms=0.076007Jy sigma=0.000792 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076007Jy sigma=0.000792 ! Fit after self-cal, rms=0.075842Jy sigma=0.000786 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.586 mas, bmaj=5.855 mas, bpa=83.62 degrees ! Estimated noise=654.519 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00321338 Jy ! Component: 100 - total flux cleaned = 0.00438332 Jy ! Component: 150 - total flux cleaned = 0.00506712 Jy ! Component: 200 - total flux cleaned = 0.00567913 Jy ! Total flux subtracted in 200 components = 0.00567913 Jy ! Clean residual min=-0.003191 max=0.002728 Jy/beam ! Clean residual mean=-0.000010 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.379337 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 146 components and 0.379337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075667Jy sigma=0.000784 ! Fit after self-cal, rms=0.075674Jy sigma=0.000784 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000575817 Jy ! Component: 100 - total flux cleaned = 0.00102557 Jy ! Component: 150 - total flux cleaned = 0.00134963 Jy ! Component: 200 - total flux cleaned = 0.0016447 Jy ! Total flux subtracted in 200 components = 0.0016447 Jy ! Clean residual min=-0.003030 max=0.002746 Jy/beam ! Clean residual mean=-0.000008 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.380982 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 160 components and 0.380982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075630Jy sigma=0.000783 ! Fit after self-cal, rms=0.075629Jy sigma=0.000783 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075629Jy sigma=0.000783 ! Fit after self-cal, rms=0.075546Jy sigma=0.000783 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.59 mas, bmaj=5.861 mas, bpa=83.57 degrees ! Estimated noise=653.556 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000339846 Jy ! Component: 100 - total flux cleaned = 0.000141803 Jy ! Component: 150 - total flux cleaned = 0.000455034 Jy ! Component: 200 - total flux cleaned = 0.000674503 Jy ! Total flux subtracted in 200 components = 0.000674503 Jy ! Clean residual min=-0.002895 max=0.002753 Jy/beam ! Clean residual mean=-0.000011 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.381657 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 169 components and 0.381657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075510Jy sigma=0.000783 ! Fit after self-cal, rms=0.075509Jy sigma=0.000783 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.16661e-05 Jy ! Component: 100 - total flux cleaned = 0.000329162 Jy ! Component: 150 - total flux cleaned = 0.000484678 Jy ! Component: 200 - total flux cleaned = 0.000581703 Jy ! Total flux subtracted in 200 components = 0.000581703 Jy ! Clean residual min=-0.002837 max=0.002768 Jy/beam ! Clean residual mean=-0.000010 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.382238 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 174 components and 0.382238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075490Jy sigma=0.000783 ! Fit after self-cal, rms=0.075490Jy sigma=0.000783 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075490Jy sigma=0.000783 ! Fit after self-cal, rms=0.075465Jy sigma=0.000782 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.575 mas, bmaj=10.6 mas, bpa=75.05 degrees ! Estimated noise=803.964 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000745565 Jy ! Component: 100 - total flux cleaned = 0.00124422 Jy ! Component: 150 - total flux cleaned = 0.00160153 Jy ! Component: 200 - total flux cleaned = 0.00171321 Jy ! Total flux subtracted in 200 components = 0.00171321 Jy ! Clean residual min=-0.004004 max=0.004002 Jy/beam ! Clean residual mean=-0.000021 rms=0.001016 Jy/beam ! Combined flux in latest and established models = 0.383951 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 181 components and 0.383951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075462Jy sigma=0.000782 ! Fit after self-cal, rms=0.075460Jy sigma=0.000782 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.3722e-07 Jy ! Component: 100 - total flux cleaned = 9.90783e-05 Jy ! Component: 150 - total flux cleaned = 0.000188606 Jy ! Component: 200 - total flux cleaned = 0.000251433 Jy ! Total flux subtracted in 200 components = 0.000251433 Jy ! Clean residual min=-0.003969 max=0.004046 Jy/beam ! Clean residual mean=-0.000020 rms=0.001007 Jy/beam ! Combined flux in latest and established models = 0.384203 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 191 components and 0.384203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075466Jy sigma=0.000782 ! Fit after self-cal, rms=0.075466Jy sigma=0.000782 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.594 mas, bmaj=5.868 mas, bpa=83.53 degrees ! Estimated noise=653.205 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.594 x 5.868 at 83.53 degrees (North through East) ! Clean map min=-0.0027287 max=0.2555 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.906 mas, bmaj=4.841 mas, bpa=86.2 degrees ! Estimated noise=983.187 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.193739 Jy ! Component: 100 - total flux cleaned = 0.251686 Jy ! Component: 150 - total flux cleaned = 0.281691 Jy ! Component: 200 - total flux cleaned = 0.299526 Jy ! Total flux subtracted in 200 components = 0.299526 Jy ! Clean residual min=-0.005373 max=0.009367 Jy/beam ! Clean residual mean=-0.000043 rms=0.001501 Jy/beam ! Combined flux in latest and established models = 0.299526 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.299526 Jy ! Inverting map and beam ! Estimated beam: bmin=3.594 mas, bmaj=5.868 mas, bpa=83.53 degrees ! Estimated noise=653.205 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0168568 Jy ! Component: 100 - total flux cleaned = 0.0285668 Jy ! Component: 150 - total flux cleaned = 0.0378033 Jy ! Component: 200 - total flux cleaned = 0.0451674 Jy ! Total flux subtracted in 200 components = 0.0451674 Jy ! Clean residual min=-0.003900 max=0.004732 Jy/beam ! Clean residual mean=-0.000060 rms=0.001148 Jy/beam ! Combined flux in latest and established models = 0.344694 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 61 components and 0.344694 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.575 mas, bmaj=10.6 mas, bpa=75.05 degrees ! Estimated noise=803.964 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105949 Jy ! Component: 100 - total flux cleaned = 0.0177758 Jy ! Component: 150 - total flux cleaned = 0.0229084 Jy ! Component: 200 - total flux cleaned = 0.0267253 Jy ! Total flux subtracted in 200 components = 0.0267253 Jy ! Clean residual min=-0.004041 max=0.004588 Jy/beam ! Clean residual mean=-0.000055 rms=0.001183 Jy/beam ! Combined flux in latest and established models = 0.371419 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00288772 Jy ! Component: 100 - total flux cleaned = 0.00511893 Jy ! Component: 150 - total flux cleaned = 0.00686577 Jy ! Component: 200 - total flux cleaned = 0.00823826 Jy ! Total flux subtracted in 200 components = 0.00823826 Jy ! Clean residual min=-0.003969 max=0.004197 Jy/beam ! Clean residual mean=-0.000032 rms=0.001030 Jy/beam ! Combined flux in latest and established models = 0.379657 Jy ! Adding 120 model components to the UV plane model. ! The established model now contains 170 components and 0.379657 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.594 mas, bmaj=5.868 mas, bpa=83.53 degrees ! Estimated noise=653.205 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000248308 Jy ! Component: 100 - total flux cleaned = 0.000389108 Jy ! Component: 150 - total flux cleaned = 0.000556148 Jy ! Component: 200 - total flux cleaned = 0.000743047 Jy ! Total flux subtracted in 200 components = 0.000743047 Jy ! Clean residual min=-0.002621 max=0.002949 Jy/beam ! Clean residual mean=-0.000014 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.3804 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 186 components and 0.3804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075482Jy sigma=0.000783 ! Fit after self-cal, rms=0.075458Jy sigma=0.000782 wmodel J2007+6607_S_2014_12_20_pus_map.mod ! Writing 186 model components to file: J2007+6607_S_2014_12_20_pus_map.mod wobs J2007+6607_S_2014_12_20_pus_uvs.fits ! Writing UV FITS file: J2007+6607_S_2014_12_20_pus_uvs.fits wwins J2007+6607_S_2014_12_20_pus_map.win ! wwins: Wrote 3 windows to J2007+6607_S_2014_12_20_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000755642 Jy ! Component: 100 - total flux cleaned = 0.000800698 Jy ! Component: 150 - total flux cleaned = 0.000757414 Jy ! Component: 200 - total flux cleaned = 0.000715445 Jy ! Component: 250 - total flux cleaned = 0.000598041 Jy ! Component: 300 - total flux cleaned = 0.000523357 Jy ! Component: 350 - total flux cleaned = 0.000453075 Jy ! Component: 400 - total flux cleaned = 0.000249095 Jy ! Component: 450 - total flux cleaned = 0.000149921 Jy ! Component: 500 - total flux cleaned = 8.59317e-05 Jy ! Component: 550 - total flux cleaned = 0.000117649 Jy ! Component: 600 - total flux cleaned = 0.000148355 Jy ! Component: 650 - total flux cleaned = 0.000208575 Jy ! Component: 700 - total flux cleaned = 0.000238396 Jy ! Component: 750 - total flux cleaned = 0.000238536 Jy ! Component: 800 - total flux cleaned = 0.000154733 Jy ! Component: 850 - total flux cleaned = 0.000100344 Jy ! Component: 900 - total flux cleaned = 1.9338e-05 Jy ! Component: 950 - total flux cleaned = -3.35395e-05 Jy ! Component: 1000 - total flux cleaned = -0.000111918 Jy ! Component: 1050 - total flux cleaned = -0.000214149 Jy ! Component: 1100 - total flux cleaned = -0.000314706 Jy ! Component: 1150 - total flux cleaned = -0.00033956 Jy ! Component: 1200 - total flux cleaned = -0.000364274 Jy ! Component: 1250 - total flux cleaned = -0.000483965 Jy ! Component: 1300 - total flux cleaned = -0.000484053 Jy ! Component: 1350 - total flux cleaned = -0.00055413 Jy ! Component: 1400 - total flux cleaned = -0.000576987 Jy ! Component: 1450 - total flux cleaned = -0.000622204 Jy ! Component: 1500 - total flux cleaned = -0.000644534 Jy ! Component: 1550 - total flux cleaned = -0.000644454 Jy ! Component: 1600 - total flux cleaned = -0.000666536 Jy ! Component: 1650 - total flux cleaned = -0.000752128 Jy ! Component: 1700 - total flux cleaned = -0.000730884 Jy ! Component: 1750 - total flux cleaned = -0.000814015 Jy ! Component: 1800 - total flux cleaned = -0.000854682 Jy ! Component: 1850 - total flux cleaned = -0.000834421 Jy ! Component: 1900 - total flux cleaned = -0.000974532 Jy ! Component: 1950 - total flux cleaned = -0.000974397 Jy ! Component: 2000 - total flux cleaned = -0.00103316 Jy ! Component: 2050 - total flux cleaned = -0.00109141 Jy ! Component: 2100 - total flux cleaned = -0.00116783 Jy ! Component: 2150 - total flux cleaned = -0.00112994 Jy ! Component: 2200 - total flux cleaned = -0.00116751 Jy ! Component: 2250 - total flux cleaned = -0.00124158 Jy ! Component: 2300 - total flux cleaned = -0.00125978 Jy ! Component: 2350 - total flux cleaned = -0.00125978 Jy ! Component: 2400 - total flux cleaned = -0.00124174 Jy ! Component: 2450 - total flux cleaned = -0.0012772 Jy ! Component: 2500 - total flux cleaned = -0.00131262 Jy ! Component: 2550 - total flux cleaned = -0.00134732 Jy ! Component: 2600 - total flux cleaned = -0.00136462 Jy ! Component: 2650 - total flux cleaned = -0.00134747 Jy ! Component: 2700 - total flux cleaned = -0.00143206 Jy ! Component: 2750 - total flux cleaned = -0.00151594 Jy ! Component: 2800 - total flux cleaned = -0.0015491 Jy ! Component: 2850 - total flux cleaned = -0.00158213 Jy ! Component: 2900 - total flux cleaned = -0.00159845 Jy ! Component: 2950 - total flux cleaned = -0.00164716 Jy ! Component: 3000 - total flux cleaned = -0.00174351 Jy ! Component: 3050 - total flux cleaned = -0.00179095 Jy ! Component: 3100 - total flux cleaned = -0.00180658 Jy ! Component: 3150 - total flux cleaned = -0.0018223 Jy ! Component: 3200 - total flux cleaned = -0.00189995 Jy ! Component: 3250 - total flux cleaned = -0.0018537 Jy ! Component: 3300 - total flux cleaned = -0.00191501 Jy ! Component: 3350 - total flux cleaned = -0.00196044 Jy ! Component: 3400 - total flux cleaned = -0.00202081 Jy ! Component: 3450 - total flux cleaned = -0.00197578 Jy ! Component: 3500 - total flux cleaned = -0.00200558 Jy ! Component: 3550 - total flux cleaned = -0.00204986 Jy ! Component: 3600 - total flux cleaned = -0.00212289 Jy ! Component: 3650 - total flux cleaned = -0.00218094 Jy ! Component: 3700 - total flux cleaned = -0.00220974 Jy ! Component: 3750 - total flux cleaned = -0.00226719 Jy ! Component: 3800 - total flux cleaned = -0.00225284 Jy ! Component: 3850 - total flux cleaned = -0.00222458 Jy ! Component: 3900 - total flux cleaned = -0.00230889 Jy ! Component: 3950 - total flux cleaned = -0.00239261 Jy ! Component: 4000 - total flux cleaned = -0.00239267 Jy ! Component: 4050 - total flux cleaned = -0.00243406 Jy ! Total flux subtracted in 4096 components = -0.00248878 Jy ! Clean residual min=-0.000826 max=0.000760 Jy/beam ! Clean residual mean=-0.000006 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.377911 Jy keep ! Adding 299 model components to the UV plane model. ! The established model now contains 485 components and 0.377912 Jy ![Exited script file: muppet] wmap "J2007+6607_S_2014_12_20_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.594 x 5.868 at 83.53 degrees (North through East) ! Clean map min=-0.0015199 max=0.25557 Jy/beam ! Writing clean map to FITS file: J2007+6607_S_2014_12_20_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.255565 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000242685 device "J2007+6607_S_2014_12_20_pus\_map.eps/VPS" ! Attempting to open device: 'J2007+6607_S_2014_12_20_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.284879 0.284879 0.569759 1.13952 2.27904 4.55807 9.11614 18.2323 36.4646 72.9291 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.255 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.594 x 5.868 at 83.53 degrees (North through East) ! Clean map min=-0.0015199 max=0.25557 Jy/beam quit ! Quitting program ! Log file J2007+6607_S_2014_12_20_pus_uvs.log closed on Wed Dec 28 13:44:31 2016