! Started logfile: J2005-3723_S_2015_03_17_pus_uvs.log on Fri Dec 30 23:07:35 2016 obs J2005-3723_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J2005-3723_S_2015_03_17_pus_uva.fits ! AN table 1: 15 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.57037 visibilities/baseline/integration-bin. ! Found source: J2005-3723 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 1540 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2005-3723_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.606175Jy sigma=0.004836 ! Fit after self-cal, rms=0.596991Jy sigma=0.004758 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.18 mas, bmaj=6.534 mas, bpa=0.7573 degrees ! Estimated noise=2786.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.303068 Jy ! Component: 100 - total flux cleaned = 0.383791 Jy ! Total flux subtracted in 100 components = 0.383791 Jy ! Clean residual min=-0.024327 max=0.034661 Jy/beam ! Clean residual mean=-0.000407 rms=0.006994 Jy/beam ! Combined flux in latest and established models = 0.383791 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.383791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150258Jy sigma=0.001022 ! Fit after self-cal, rms=0.150137Jy sigma=0.001021 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.629 mas, bmaj=7.456 mas, bpa=-1.709 degrees ! Estimated noise=2456.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0513216 Jy ! Component: 100 - total flux cleaned = 0.0759625 Jy ! Component: 150 - total flux cleaned = 0.088511 Jy ! Component: 200 - total flux cleaned = 0.0950283 Jy ! Total flux subtracted in 200 components = 0.0950283 Jy ! Clean residual min=-0.022923 max=0.021985 Jy/beam ! Clean residual mean=-0.000458 rms=0.005861 Jy/beam ! Combined flux in latest and established models = 0.478819 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 47 components and 0.478819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130765Jy sigma=0.000892 ! Fit after self-cal, rms=0.130649Jy sigma=0.000892 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.86 HN 1.00* KP 1.09 ! LA 1.00* MK 0.97 NL 1.02 OV 1.00* ! PT 1.06 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.91 HN 1.00* KP 1.00 ! LA 0.94 MK 1.00 NL 1.18 OV 1.00* ! PT 1.00 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.93 HN 1.00* KP 0.94 ! LA 0.76 MK 1.01 NL 1.34 OV 1.00* ! PT 0.99 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.93 HN 1.00* KP 0.91 ! LA 0.80 MK 1.02 NL 1.21 OV 1.00* ! PT 1.06 SC 0.99 ! ! ! Fit before self-cal, rms=0.130649Jy sigma=0.000892 ! Fit after self-cal, rms=0.112774Jy sigma=0.000777 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.643 mas, bmaj=7.485 mas, bpa=-1.632 degrees ! Estimated noise=2446.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000152291 Jy ! Component: 100 - total flux cleaned = -0.000289912 Jy ! Component: 150 - total flux cleaned = -0.000356431 Jy ! Component: 200 - total flux cleaned = -0.00033571 Jy ! Total flux subtracted in 200 components = -0.00033571 Jy ! Clean residual min=-0.005892 max=0.006479 Jy/beam ! Clean residual mean=0.000001 rms=0.001647 Jy/beam ! Combined flux in latest and established models = 0.478483 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 53 components and 0.478483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112761Jy sigma=0.000777 ! Fit after self-cal, rms=0.112876Jy sigma=0.000776 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112876Jy sigma=0.000776 ! Fit after self-cal, rms=0.112881Jy sigma=0.000776 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.644 mas, bmaj=7.487 mas, bpa=-1.635 degrees ! Estimated noise=2446.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000276403 Jy ! Component: 100 - total flux cleaned = -0.000364 Jy ! Component: 150 - total flux cleaned = -0.000402086 Jy ! Component: 200 - total flux cleaned = -0.00040252 Jy ! Total flux subtracted in 200 components = -0.00040252 Jy ! Clean residual min=-0.005848 max=0.006560 Jy/beam ! Clean residual mean=0.000001 rms=0.001641 Jy/beam ! Combined flux in latest and established models = 0.478081 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 55 components and 0.478081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112871Jy sigma=0.000776 ! Fit after self-cal, rms=0.112874Jy sigma=0.000776 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.56853e-05 Jy ! Component: 100 - total flux cleaned = -3.90584e-05 Jy ! Component: 150 - total flux cleaned = -7.15651e-05 Jy ! Component: 200 - total flux cleaned = -5.61713e-05 Jy ! Total flux subtracted in 200 components = -5.61713e-05 Jy ! Clean residual min=-0.005806 max=0.006630 Jy/beam ! Clean residual mean=0.000001 rms=0.001639 Jy/beam ! Combined flux in latest and established models = 0.478025 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 55 components and 0.478025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112867Jy sigma=0.000776 ! Fit after self-cal, rms=0.112870Jy sigma=0.000776 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112870Jy sigma=0.000776 ! Fit after self-cal, rms=0.112870Jy sigma=0.000776 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.645 mas, bmaj=7.489 mas, bpa=-1.637 degrees ! Estimated noise=2446.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000316603 Jy ! Component: 100 - total flux cleaned = -0.000388853 Jy ! Component: 150 - total flux cleaned = -0.000434373 Jy ! Component: 200 - total flux cleaned = -0.000434533 Jy ! Total flux subtracted in 200 components = -0.000434533 Jy ! Clean residual min=-0.005822 max=0.006653 Jy/beam ! Clean residual mean=0.000002 rms=0.001637 Jy/beam ! Combined flux in latest and established models = 0.47759 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 62 components and 0.47759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112862Jy sigma=0.000776 ! Fit after self-cal, rms=0.112865Jy sigma=0.000776 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.21871e-05 Jy ! Component: 100 - total flux cleaned = -6.006e-05 Jy ! Component: 150 - total flux cleaned = -6.02152e-05 Jy ! Component: 200 - total flux cleaned = -6.01009e-05 Jy ! Total flux subtracted in 200 components = -6.01009e-05 Jy ! Clean residual min=-0.005821 max=0.006703 Jy/beam ! Clean residual mean=0.000002 rms=0.001636 Jy/beam ! Combined flux in latest and established models = 0.47753 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 63 components and 0.47753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112860Jy sigma=0.000776 ! Fit after self-cal, rms=0.112862Jy sigma=0.000776 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112862Jy sigma=0.000776 ! Fit after self-cal, rms=0.112852Jy sigma=0.000776 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.653 mas, bmaj=25.28 mas, bpa=5.21 degrees ! Estimated noise=3474.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000590877 Jy ! Component: 100 - total flux cleaned = -0.000592813 Jy ! Component: 150 - total flux cleaned = -0.000593866 Jy ! Component: 200 - total flux cleaned = -0.000594589 Jy ! Total flux subtracted in 200 components = -0.000594589 Jy ! Clean residual min=-0.006000 max=0.007886 Jy/beam ! Clean residual mean=0.000006 rms=0.002069 Jy/beam ! Combined flux in latest and established models = 0.476935 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 64 components and 0.476935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112857Jy sigma=0.000776 ! Fit after self-cal, rms=0.112850Jy sigma=0.000776 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.41622e-05 Jy ! Component: 100 - total flux cleaned = -5.47086e-05 Jy ! Component: 150 - total flux cleaned = -5.53866e-05 Jy ! Component: 200 - total flux cleaned = -5.60004e-05 Jy ! Total flux subtracted in 200 components = -5.60004e-05 Jy ! Clean residual min=-0.006018 max=0.007887 Jy/beam ! Clean residual mean=0.000006 rms=0.002070 Jy/beam ! Combined flux in latest and established models = 0.476879 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 65 components and 0.476879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112859Jy sigma=0.000776 ! Fit after self-cal, rms=0.112854Jy sigma=0.000776 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.646 mas, bmaj=7.492 mas, bpa=-1.638 degrees ! Estimated noise=2446.43 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.646 x 7.492 at -1.638 degrees (North through East) ! Clean map min=-0.0054858 max=0.39853 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.187 mas, bmaj=6.527 mas, bpa=0.9181 degrees ! Estimated noise=2787.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.303008 Jy ! Component: 100 - total flux cleaned = 0.38273 Jy ! Component: 150 - total flux cleaned = 0.421131 Jy ! Component: 200 - total flux cleaned = 0.442618 Jy ! Total flux subtracted in 200 components = 0.442618 Jy ! Clean residual min=-0.009670 max=0.011913 Jy/beam ! Clean residual mean=-0.000077 rms=0.002799 Jy/beam ! Combined flux in latest and established models = 0.442618 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.442618 Jy ! Inverting map and beam ! Estimated beam: bmin=2.646 mas, bmaj=7.492 mas, bpa=-1.638 degrees ! Estimated noise=2446.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171924 Jy ! Component: 100 - total flux cleaned = 0.0257376 Jy ! Component: 150 - total flux cleaned = 0.0300274 Jy ! Component: 200 - total flux cleaned = 0.0321831 Jy ! Total flux subtracted in 200 components = 0.0321831 Jy ! Clean residual min=-0.005992 max=0.006880 Jy/beam ! Clean residual mean=-0.000009 rms=0.001641 Jy/beam ! Combined flux in latest and established models = 0.474801 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 58 components and 0.474801 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.653 mas, bmaj=25.28 mas, bpa=5.21 degrees ! Estimated noise=3474.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175302 Jy ! Component: 100 - total flux cleaned = 0.00185533 Jy ! Component: 150 - total flux cleaned = 0.00185351 Jy ! Component: 200 - total flux cleaned = 0.00185279 Jy ! Total flux subtracted in 200 components = 0.00185279 Jy ! Clean residual min=-0.006271 max=0.007914 Jy/beam ! Clean residual mean=0.000002 rms=0.002081 Jy/beam ! Combined flux in latest and established models = 0.476654 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.05938e-06 Jy ! Component: 100 - total flux cleaned = 2.61108e-06 Jy ! Component: 150 - total flux cleaned = 4.18055e-06 Jy ! Component: 200 - total flux cleaned = 5.61093e-06 Jy ! Total flux subtracted in 200 components = 5.61093e-06 Jy ! Clean residual min=-0.006239 max=0.007912 Jy/beam ! Clean residual mean=0.000002 rms=0.002078 Jy/beam ! Combined flux in latest and established models = 0.476659 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 65 components and 0.476659 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.646 mas, bmaj=7.492 mas, bpa=-1.638 degrees ! Estimated noise=2446.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000336562 Jy ! Component: 100 - total flux cleaned = -0.000246204 Jy ! Component: 150 - total flux cleaned = -0.000175485 Jy ! Component: 200 - total flux cleaned = -0.000113395 Jy ! Total flux subtracted in 200 components = -0.000113395 Jy ! Clean residual min=-0.005886 max=0.006861 Jy/beam ! Clean residual mean=-0.000001 rms=0.001631 Jy/beam ! Combined flux in latest and established models = 0.476546 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 69 components and 0.476546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112795Jy sigma=0.000776 ! Fit after self-cal, rms=0.112798Jy sigma=0.000776 wmodel J2005-3723_S_2015_03_17_pus_map.mod ! Writing 69 model components to file: J2005-3723_S_2015_03_17_pus_map.mod wobs J2005-3723_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J2005-3723_S_2015_03_17_pus_uvs.fits wwins J2005-3723_S_2015_03_17_pus_map.win ! wwins: Wrote 1 windows to J2005-3723_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134189 Jy ! Component: 100 - total flux cleaned = 0.00135387 Jy ! Component: 150 - total flux cleaned = 0.000903927 Jy ! Component: 200 - total flux cleaned = 0.000820362 Jy ! Component: 250 - total flux cleaned = 0.000573155 Jy ! Component: 300 - total flux cleaned = 0.000259395 Jy ! Component: 350 - total flux cleaned = -3.82139e-05 Jy ! Component: 400 - total flux cleaned = -0.000110831 Jy ! Component: 450 - total flux cleaned = -0.000319985 Jy ! Component: 500 - total flux cleaned = -0.000317215 Jy ! Component: 550 - total flux cleaned = -0.000250711 Jy ! Component: 600 - total flux cleaned = -0.000252356 Jy ! Component: 650 - total flux cleaned = -0.000252165 Jy ! Component: 700 - total flux cleaned = -0.00036973 Jy ! Component: 750 - total flux cleaned = -0.000137928 Jy ! Component: 800 - total flux cleaned = -0.000196492 Jy ! Component: 850 - total flux cleaned = -3.15283e-05 Jy ! Component: 900 - total flux cleaned = -3.06367e-05 Jy ! Component: 950 - total flux cleaned = 0.000127963 Jy ! Component: 1000 - total flux cleaned = 0.000333616 Jy ! Component: 1050 - total flux cleaned = 0.000534442 Jy ! Component: 1100 - total flux cleaned = 0.000535641 Jy ! Component: 1150 - total flux cleaned = 0.000681546 Jy ! Component: 1200 - total flux cleaned = 0.000729328 Jy ! Component: 1250 - total flux cleaned = 0.000822853 Jy ! Component: 1300 - total flux cleaned = 0.000869847 Jy ! Component: 1350 - total flux cleaned = 0.000961121 Jy ! Component: 1400 - total flux cleaned = 0.00105029 Jy ! Component: 1450 - total flux cleaned = 0.00109397 Jy ! Component: 1500 - total flux cleaned = 0.00113715 Jy ! Component: 1550 - total flux cleaned = 0.00100954 Jy ! Component: 1600 - total flux cleaned = 0.00105167 Jy ! Component: 1650 - total flux cleaned = 0.00109328 Jy ! Component: 1700 - total flux cleaned = 0.00105217 Jy ! Component: 1750 - total flux cleaned = 0.00109321 Jy ! Component: 1800 - total flux cleaned = 0.00113391 Jy ! Component: 1850 - total flux cleaned = 0.00121451 Jy ! Component: 1900 - total flux cleaned = 0.00121387 Jy ! Component: 1950 - total flux cleaned = 0.00117438 Jy ! Component: 2000 - total flux cleaned = 0.00117432 Jy ! Component: 2050 - total flux cleaned = 0.00121373 Jy ! Component: 2100 - total flux cleaned = 0.00125268 Jy ! Component: 2150 - total flux cleaned = 0.00129179 Jy ! Component: 2200 - total flux cleaned = 0.00144677 Jy ! Component: 2250 - total flux cleaned = 0.00160094 Jy ! Component: 2300 - total flux cleaned = 0.0017544 Jy ! Component: 2350 - total flux cleaned = 0.00194604 Jy ! Component: 2400 - total flux cleaned = 0.00202273 Jy ! Component: 2450 - total flux cleaned = 0.0021758 Jy ! Component: 2500 - total flux cleaned = 0.00221428 Jy ! Component: 2550 - total flux cleaned = 0.00229094 Jy ! Component: 2600 - total flux cleaned = 0.00225235 Jy ! Component: 2650 - total flux cleaned = 0.00229089 Jy ! Component: 2700 - total flux cleaned = 0.00232985 Jy ! Component: 2750 - total flux cleaned = 0.00232995 Jy ! Component: 2800 - total flux cleaned = 0.00232995 Jy ! Component: 2850 - total flux cleaned = 0.00240841 Jy ! Component: 2900 - total flux cleaned = 0.00236886 Jy ! Component: 2950 - total flux cleaned = 0.00240852 Jy ! Component: 3000 - total flux cleaned = 0.00240829 Jy ! Component: 3050 - total flux cleaned = 0.00240827 Jy ! Component: 3100 - total flux cleaned = 0.00236799 Jy ! Component: 3150 - total flux cleaned = 0.00253063 Jy ! Component: 3200 - total flux cleaned = 0.00253126 Jy ! Component: 3250 - total flux cleaned = 0.00257289 Jy ! Component: 3300 - total flux cleaned = 0.00261493 Jy ! Component: 3350 - total flux cleaned = 0.00265733 Jy ! Component: 3400 - total flux cleaned = 0.00269992 Jy ! Component: 3450 - total flux cleaned = 0.002743 Jy ! Component: 3500 - total flux cleaned = 0.00282978 Jy ! Component: 3550 - total flux cleaned = 0.00283019 Jy ! Component: 3600 - total flux cleaned = 0.00287518 Jy ! Component: 3650 - total flux cleaned = 0.00287505 Jy ! Component: 3700 - total flux cleaned = 0.00296525 Jy ! Component: 3750 - total flux cleaned = 0.0029652 Jy ! Component: 3800 - total flux cleaned = 0.00301136 Jy ! Component: 3850 - total flux cleaned = 0.00305865 Jy ! Component: 3900 - total flux cleaned = 0.00305868 Jy ! Component: 3950 - total flux cleaned = 0.00310649 Jy ! Component: 4000 - total flux cleaned = 0.00315562 Jy ! Component: 4050 - total flux cleaned = 0.00320489 Jy ! Total flux subtracted in 4096 components = 0.00320531 Jy ! Clean residual min=-0.002824 max=0.003187 Jy/beam ! Clean residual mean=-0.000015 rms=0.000868 Jy/beam ! Combined flux in latest and established models = 0.479751 Jy keep ! Adding 209 model components to the UV plane model. ! The established model now contains 278 components and 0.479751 Jy ![Exited script file: muppet] wmap "J2005-3723_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.646 x 7.492 at -1.638 degrees (North through East) ! Clean map min=-0.0073714 max=0.39927 Jy/beam ! Writing clean map to FITS file: J2005-3723_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.399266 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000927259 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.696722 0.696722 1.39344 2.78689 5.57378 11.1476 22.2951 44.5902 89.1805 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0027 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.399 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.646 x 7.492 at -1.638 degrees (North through East) ! Clean map min=-0.0073714 max=0.39927 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2005-3723_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 23:07:39 2016