! Started logfile: J2005-3723_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:34:24 2017 obs J2005-3723_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J2005-3723_S_2015_01_23_pus_uva.fits ! AN table 1: 15 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.534815 visibilities/baseline/integration-bin. ! Found source: J2005-3723 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 1444 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2005-3723_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.668283Jy sigma=0.004960 ! Fit after self-cal, rms=0.668420Jy sigma=0.004946 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.815 mas, bmaj=22.46 mas, bpa=-23.41 degrees ! Estimated noise=4546.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.273402 Jy ! Component: 100 - total flux cleaned = 0.338696 Jy ! Total flux subtracted in 100 components = 0.338696 Jy ! Clean residual min=-0.027233 max=0.030782 Jy/beam ! Clean residual mean=-0.000333 rms=0.008967 Jy/beam ! Combined flux in latest and established models = 0.338696 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.338696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212768Jy sigma=0.000949 ! Fit after self-cal, rms=0.212675Jy sigma=0.000947 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.482 mas, bmaj=22.86 mas, bpa=-22.93 degrees ! Estimated noise=2773.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0386369 Jy ! Component: 100 - total flux cleaned = 0.0604739 Jy ! Component: 150 - total flux cleaned = 0.074026 Jy ! Component: 200 - total flux cleaned = 0.0830444 Jy ! Total flux subtracted in 200 components = 0.0830444 Jy ! Clean residual min=-0.012978 max=0.012581 Jy/beam ! Clean residual mean=0.000003 rms=0.004400 Jy/beam ! Combined flux in latest and established models = 0.42174 Jy ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 84 components and 0.42174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203857Jy sigma=0.000865 ! Fit after self-cal, rms=0.203611Jy sigma=0.000864 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 1.00* KP 1.16 ! LA 1.04 MK 1.00 NL 0.98 OV 0.98 ! PT 1.04 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.33 HN 1.00* KP 1.09 ! LA 0.97 MK 1.03 NL 1.12 OV 0.94 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.38 HN 1.00* KP 0.91 ! LA 0.81 MK 1.03 NL 1.12 OV 0.90 ! PT 0.98 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.86 HN 1.00* KP 0.80 ! LA 0.83 MK 1.04 NL 1.17 OV 0.93 ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.203611Jy sigma=0.000864 ! Fit after self-cal, rms=0.204902Jy sigma=0.000774 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.526 mas, bmaj=23.35 mas, bpa=-23.02 degrees ! Estimated noise=2778.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00132567 Jy ! Component: 100 - total flux cleaned = -0.00204853 Jy ! Component: 150 - total flux cleaned = -0.00221653 Jy ! Component: 200 - total flux cleaned = -0.00244221 Jy ! Total flux subtracted in 200 components = -0.00244221 Jy ! Clean residual min=-0.006517 max=0.006079 Jy/beam ! Clean residual mean=0.000051 rms=0.001850 Jy/beam ! Combined flux in latest and established models = 0.419298 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 104 components and 0.419298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204779Jy sigma=0.000773 ! Fit after self-cal, rms=0.204776Jy sigma=0.000772 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204776Jy sigma=0.000772 ! Fit after self-cal, rms=0.204954Jy sigma=0.000772 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.528 mas, bmaj=23.39 mas, bpa=-23.02 degrees ! Estimated noise=2777.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00107675 Jy ! Component: 100 - total flux cleaned = -0.00146372 Jy ! Component: 150 - total flux cleaned = -0.00166623 Jy ! Component: 200 - total flux cleaned = -0.00184868 Jy ! Total flux subtracted in 200 components = -0.00184868 Jy ! Clean residual min=-0.006844 max=0.006001 Jy/beam ! Clean residual mean=0.000059 rms=0.001784 Jy/beam ! Combined flux in latest and established models = 0.417449 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 114 components and 0.417449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204869Jy sigma=0.000772 ! Fit after self-cal, rms=0.204863Jy sigma=0.000772 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.64589e-05 Jy ! Component: 100 - total flux cleaned = -0.00011943 Jy ! Component: 150 - total flux cleaned = -0.000217128 Jy ! Component: 200 - total flux cleaned = -0.000306859 Jy ! Total flux subtracted in 200 components = -0.000306859 Jy ! Clean residual min=-0.006938 max=0.005990 Jy/beam ! Clean residual mean=0.000058 rms=0.001779 Jy/beam ! Combined flux in latest and established models = 0.417142 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 120 components and 0.417142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204800Jy sigma=0.000772 ! Fit after self-cal, rms=0.204808Jy sigma=0.000772 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204808Jy sigma=0.000772 ! Fit after self-cal, rms=0.204304Jy sigma=0.000772 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.527 mas, bmaj=23.44 mas, bpa=-23.03 degrees ! Estimated noise=2775.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00116122 Jy ! Component: 100 - total flux cleaned = -0.00143999 Jy ! Component: 150 - total flux cleaned = -0.00159235 Jy ! Component: 200 - total flux cleaned = -0.00163996 Jy ! Total flux subtracted in 200 components = -0.00163996 Jy ! Clean residual min=-0.006972 max=0.005942 Jy/beam ! Clean residual mean=0.000074 rms=0.001729 Jy/beam ! Combined flux in latest and established models = 0.415502 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 129 components and 0.415502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204247Jy sigma=0.000771 ! Fit after self-cal, rms=0.204257Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.28514e-05 Jy ! Component: 100 - total flux cleaned = -0.000115608 Jy ! Component: 150 - total flux cleaned = -7.51658e-05 Jy ! Component: 200 - total flux cleaned = -7.71559e-05 Jy ! Total flux subtracted in 200 components = -7.71559e-05 Jy ! Clean residual min=-0.006932 max=0.005924 Jy/beam ! Clean residual mean=0.000074 rms=0.001729 Jy/beam ! Combined flux in latest and established models = 0.415425 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 137 components and 0.415425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204203Jy sigma=0.000771 ! Fit after self-cal, rms=0.204215Jy sigma=0.000771 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204215Jy sigma=0.000771 ! Fit after self-cal, rms=0.203727Jy sigma=0.000771 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.389 mas, bmaj=35.55 mas, bpa=-6.811 degrees ! Estimated noise=3283.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000932234 Jy ! Component: 100 - total flux cleaned = -0.00108289 Jy ! Component: 150 - total flux cleaned = -0.00114978 Jy ! Component: 200 - total flux cleaned = -0.00120816 Jy ! Total flux subtracted in 200 components = -0.00120816 Jy ! Clean residual min=-0.008011 max=0.005960 Jy/beam ! Clean residual mean=0.000133 rms=0.001986 Jy/beam ! Combined flux in latest and established models = 0.414217 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 150 components and 0.414217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203694Jy sigma=0.000771 ! Fit after self-cal, rms=0.203711Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000129159 Jy ! Component: 100 - total flux cleaned = -9.53675e-05 Jy ! Component: 150 - total flux cleaned = -0.000124049 Jy ! Component: 200 - total flux cleaned = -0.000119808 Jy ! Total flux subtracted in 200 components = -0.000119808 Jy ! Clean residual min=-0.008062 max=0.006010 Jy/beam ! Clean residual mean=0.000133 rms=0.001998 Jy/beam ! Combined flux in latest and established models = 0.414097 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 154 components and 0.414097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203676Jy sigma=0.000771 ! Fit after self-cal, rms=0.203685Jy sigma=0.000771 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.528 mas, bmaj=23.48 mas, bpa=-23.04 degrees ! Estimated noise=2772.72 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.528 x 23.48 at -23.04 degrees (North through East) ! Clean map min=-0.0067747 max=0.33793 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.854 mas, bmaj=22.97 mas, bpa=-23.52 degrees ! Estimated noise=4596.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.275566 Jy ! Component: 100 - total flux cleaned = 0.339798 Jy ! Component: 150 - total flux cleaned = 0.366717 Jy ! Component: 200 - total flux cleaned = 0.38384 Jy ! Total flux subtracted in 200 components = 0.38384 Jy ! Clean residual min=-0.017270 max=0.014636 Jy/beam ! Clean residual mean=-0.000044 rms=0.004953 Jy/beam ! Combined flux in latest and established models = 0.38384 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.38384 Jy ! Inverting map and beam ! Estimated beam: bmin=3.528 mas, bmaj=23.48 mas, bpa=-23.04 degrees ! Estimated noise=2772.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144416 Jy ! Component: 100 - total flux cleaned = 0.021892 Jy ! Component: 150 - total flux cleaned = 0.0264055 Jy ! Component: 200 - total flux cleaned = 0.0294434 Jy ! Total flux subtracted in 200 components = 0.0294434 Jy ! Clean residual min=-0.006755 max=0.005831 Jy/beam ! Clean residual mean=0.000070 rms=0.001818 Jy/beam ! Combined flux in latest and established models = 0.413283 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 114 components and 0.413283 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.389 mas, bmaj=35.55 mas, bpa=-6.811 degrees ! Estimated noise=3283.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00254363 Jy ! Component: 100 - total flux cleaned = 0.0029997 Jy ! Component: 150 - total flux cleaned = 0.00305191 Jy ! Component: 200 - total flux cleaned = 0.00305361 Jy ! Total flux subtracted in 200 components = 0.00305361 Jy ! Clean residual min=-0.008233 max=0.006144 Jy/beam ! Clean residual mean=0.000139 rms=0.002067 Jy/beam ! Combined flux in latest and established models = 0.416337 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.53796e-05 Jy ! Component: 100 - total flux cleaned = -4.60416e-05 Jy ! Component: 150 - total flux cleaned = -9.01052e-05 Jy ! Component: 200 - total flux cleaned = -8.99324e-05 Jy ! Total flux subtracted in 200 components = -8.99324e-05 Jy ! Clean residual min=-0.008190 max=0.006125 Jy/beam ! Clean residual mean=0.000141 rms=0.002054 Jy/beam ! Combined flux in latest and established models = 0.416247 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 149 components and 0.416247 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.528 mas, bmaj=23.48 mas, bpa=-23.04 degrees ! Estimated noise=2772.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000118231 Jy ! Component: 100 - total flux cleaned = 3.35163e-05 Jy ! Component: 150 - total flux cleaned = 0.000223159 Jy ! Component: 200 - total flux cleaned = 0.00035859 Jy ! Total flux subtracted in 200 components = 0.00035859 Jy ! Clean residual min=-0.006647 max=0.006192 Jy/beam ! Clean residual mean=0.000094 rms=0.001752 Jy/beam ! Combined flux in latest and established models = 0.416606 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 173 components and 0.416606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203842Jy sigma=0.000771 ! Fit after self-cal, rms=0.203924Jy sigma=0.000771 wmodel J2005-3723_S_2015_01_23_pus_map.mod ! Writing 173 model components to file: J2005-3723_S_2015_01_23_pus_map.mod wobs J2005-3723_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J2005-3723_S_2015_01_23_pus_uvs.fits wwins J2005-3723_S_2015_01_23_pus_map.win ! wwins: Wrote 1 windows to J2005-3723_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000413024 Jy ! Component: 100 - total flux cleaned = -1.6842e-05 Jy ! Component: 150 - total flux cleaned = 7.92591e-05 Jy ! Component: 200 - total flux cleaned = 0.000414539 Jy ! Component: 250 - total flux cleaned = 0.000653813 Jy ! Component: 300 - total flux cleaned = 0.00125385 Jy ! Component: 350 - total flux cleaned = 0.00175767 Jy ! Component: 400 - total flux cleaned = 0.00238735 Jy ! Component: 450 - total flux cleaned = 0.00292876 Jy ! Component: 500 - total flux cleaned = 0.00332522 Jy ! Component: 550 - total flux cleaned = 0.00384257 Jy ! Component: 600 - total flux cleaned = 0.00422263 Jy ! Component: 650 - total flux cleaned = 0.00447128 Jy ! Component: 700 - total flux cleaned = 0.0047156 Jy ! Component: 750 - total flux cleaned = 0.0050166 Jy ! Component: 800 - total flux cleaned = 0.00537146 Jy ! Component: 850 - total flux cleaned = 0.00548865 Jy ! Component: 900 - total flux cleaned = 0.0058926 Jy ! Component: 950 - total flux cleaned = 0.0062919 Jy ! Component: 1000 - total flux cleaned = 0.00657488 Jy ! Component: 1050 - total flux cleaned = 0.00696634 Jy ! Component: 1100 - total flux cleaned = 0.00735369 Jy ! Component: 1150 - total flux cleaned = 0.00768272 Jy ! Component: 1200 - total flux cleaned = 0.00817476 Jy ! Component: 1250 - total flux cleaned = 0.00861096 Jy ! Component: 1300 - total flux cleaned = 0.00904612 Jy ! Component: 1350 - total flux cleaned = 0.0094809 Jy ! Component: 1400 - total flux cleaned = 0.00986026 Jy ! Component: 1450 - total flux cleaned = 0.0103478 Jy ! Component: 1500 - total flux cleaned = 0.0108358 Jy ! Component: 1550 - total flux cleaned = 0.0111613 Jy ! Component: 1600 - total flux cleaned = 0.0114321 Jy ! Component: 1650 - total flux cleaned = 0.0116504 Jy ! Component: 1700 - total flux cleaned = 0.0117603 Jy ! Component: 1750 - total flux cleaned = 0.0119256 Jy ! Component: 1800 - total flux cleaned = 0.0121471 Jy ! Component: 1850 - total flux cleaned = 0.0122594 Jy ! Component: 1900 - total flux cleaned = 0.0123718 Jy ! Component: 1950 - total flux cleaned = 0.0126545 Jy ! Component: 2000 - total flux cleaned = 0.0127121 Jy ! Component: 2050 - total flux cleaned = 0.0129418 Jy ! Component: 2100 - total flux cleaned = 0.0130569 Jy ! Component: 2150 - total flux cleaned = 0.0133492 Jy ! Component: 2200 - total flux cleaned = 0.0135258 Jy ! Component: 2250 - total flux cleaned = 0.0137638 Jy ! Component: 2300 - total flux cleaned = 0.0138838 Jy ! Component: 2350 - total flux cleaned = 0.014126 Jy ! Component: 2400 - total flux cleaned = 0.0143091 Jy ! Component: 2450 - total flux cleaned = 0.0144942 Jy ! Component: 2500 - total flux cleaned = 0.0147439 Jy ! Component: 2550 - total flux cleaned = 0.0148694 Jy ! Component: 2600 - total flux cleaned = 0.0149971 Jy ! Component: 2650 - total flux cleaned = 0.0151267 Jy ! Component: 2700 - total flux cleaned = 0.0152575 Jy ! Component: 2750 - total flux cleaned = 0.0153235 Jy ! Component: 2800 - total flux cleaned = 0.0154572 Jy ! Component: 2850 - total flux cleaned = 0.0155928 Jy ! Component: 2900 - total flux cleaned = 0.0155926 Jy ! Component: 2950 - total flux cleaned = 0.0155223 Jy ! Component: 3000 - total flux cleaned = 0.0156635 Jy ! Component: 3050 - total flux cleaned = 0.015663 Jy ! Component: 3100 - total flux cleaned = 0.0155893 Jy ! Component: 3150 - total flux cleaned = 0.0155886 Jy ! Component: 3200 - total flux cleaned = 0.0155121 Jy ! Component: 3250 - total flux cleaned = 0.0153558 Jy ! Component: 3300 - total flux cleaned = 0.0153552 Jy ! Component: 3350 - total flux cleaned = 0.0153567 Jy ! Component: 3400 - total flux cleaned = 0.0152745 Jy ! Component: 3450 - total flux cleaned = 0.0151045 Jy ! Component: 3500 - total flux cleaned = 0.015105 Jy ! Component: 3550 - total flux cleaned = 0.0149313 Jy ! Component: 3600 - total flux cleaned = 0.0146623 Jy ! Component: 3650 - total flux cleaned = 0.0144795 Jy ! Component: 3700 - total flux cleaned = 0.0143871 Jy ! Component: 3750 - total flux cleaned = 0.0140065 Jy ! Component: 3800 - total flux cleaned = 0.01381 Jy ! Component: 3850 - total flux cleaned = 0.0137096 Jy ! Component: 3900 - total flux cleaned = 0.013407 Jy ! Component: 3950 - total flux cleaned = 0.0131998 Jy ! Component: 4000 - total flux cleaned = 0.0128824 Jy ! Component: 4050 - total flux cleaned = 0.0127733 Jy ! Total flux subtracted in 4096 components = 0.0125544 Jy ! Clean residual min=-0.005978 max=0.006046 Jy/beam ! Clean residual mean=-0.000062 rms=0.001877 Jy/beam ! Combined flux in latest and established models = 0.42916 Jy keep ! Adding 180 model components to the UV plane model. ! The established model now contains 353 components and 0.42916 Jy ![Exited script file: muppet] wmap "J2005-3723_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.528 x 23.48 at -23.04 degrees (North through East) ! Clean map min=-0.015261 max=0.33039 Jy/beam ! Writing clean map to FITS file: J2005-3723_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.330389 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00184366 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.67408 1.67408 3.34816 6.69633 13.3927 26.7853 53.5706 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0055 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.33 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.528 x 23.48 at -23.04 degrees (North through East) ! Clean map min=-0.015261 max=0.33039 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2005-3723_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:34:28 2017