! Started logfile: J2005+4428_S_2014_08_09_pus_uvs.log on Tue Nov 29 23:14:23 2016 obs J2005+4428_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J2005+4428_S_2014_08_09_pus_uva.fits ! AN table 1: 121 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.701194 visibilities/baseline/integration-bin. ! Found source: J2005+4428 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 15272 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2005+4428_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 189 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 189 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 189 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 189 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.945304Jy sigma=0.011290 ! Fit after self-cal, rms=0.923901Jy sigma=0.011035 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.83 mas, bmaj=7.245 mas, bpa=37.72 degrees ! Estimated noise=963.051 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0498162 Jy ! Component: 100 - total flux cleaned = 0.0796787 Jy ! Total flux subtracted in 100 components = 0.0796787 Jy ! Clean residual min=-0.011498 max=0.021135 Jy/beam ! Clean residual mean=-0.000005 rms=0.004151 Jy/beam ! Combined flux in latest and established models = 0.0796787 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.0796787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120059Jy sigma=0.001381 ! Fit after self-cal, rms=0.119375Jy sigma=0.001373 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.865 mas, bmaj=7.854 mas, bpa=37.68 degrees ! Estimated noise=486.552 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0477673 Jy ! Component: 100 - total flux cleaned = 0.0800724 Jy ! Component: 150 - total flux cleaned = 0.102245 Jy ! Component: 200 - total flux cleaned = 0.117595 Jy ! Total flux subtracted in 200 components = 0.117595 Jy ! Clean residual min=-0.011899 max=0.025426 Jy/beam ! Clean residual mean=0.000004 rms=0.005096 Jy/beam ! Combined flux in latest and established models = 0.197274 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 76 components and 0.197274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093657Jy sigma=0.001061 ! Fit after self-cal, rms=0.092069Jy sigma=0.001041 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.50 FD 1.02 HN 0.74 KP 0.96 ! LA 0.86 MK 1.00* NL 2.29 OV 1.47 ! PT 0.68 SC 1.45 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.51 FD 1.19 HN 0.89 KP 0.91 ! LA 0.80 MK 1.00* NL 2.32 OV 1.43 ! PT 0.68 SC 1.58 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 1.33 HN 0.84 KP 0.82 ! LA 0.65 MK 1.00* NL 2.24 OV 1.30 ! PT 0.67 SC 1.69 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.44 FD 1.16 HN 0.93 KP 0.78 ! LA 0.62 MK 1.00* NL 2.09 OV 1.36 ! PT 0.72 SC 1.35 ! ! ! Fit before self-cal, rms=0.092069Jy sigma=0.001041 ! Fit after self-cal, rms=0.119839Jy sigma=0.000836 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.227 mas, bmaj=8.679 mas, bpa=30.45 degrees ! Estimated noise=556.825 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00153839 Jy ! Component: 100 - total flux cleaned = -0.00153723 Jy ! Component: 150 - total flux cleaned = -0.00154336 Jy ! Component: 200 - total flux cleaned = -0.00155267 Jy ! Total flux subtracted in 200 components = -0.00155267 Jy ! Clean residual min=-0.009328 max=0.013396 Jy/beam ! Clean residual mean=0.000008 rms=0.002771 Jy/beam ! Combined flux in latest and established models = 0.195721 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 82 components and 0.195721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119123Jy sigma=0.000828 ! Fit after self-cal, rms=0.121246Jy sigma=0.000823 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121246Jy sigma=0.000823 ! Fit after self-cal, rms=0.145942Jy sigma=0.000791 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.057 mas, bmaj=8.409 mas, bpa=34.32 degrees ! Estimated noise=531.218 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.30422e-05 Jy ! Component: 100 - total flux cleaned = 1.70259e-05 Jy ! Component: 150 - total flux cleaned = -5.01274e-05 Jy ! Component: 200 - total flux cleaned = -0.000106921 Jy ! Total flux subtracted in 200 components = -0.000106921 Jy ! Clean residual min=-0.005457 max=0.006673 Jy/beam ! Clean residual mean=0.000027 rms=0.001733 Jy/beam ! Combined flux in latest and established models = 0.195614 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 82 components and 0.195614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145778Jy sigma=0.000790 ! Fit after self-cal, rms=0.146252Jy sigma=0.000788 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000309767 Jy ! Component: 100 - total flux cleaned = -0.000371626 Jy ! Component: 150 - total flux cleaned = -0.00042765 Jy ! Component: 200 - total flux cleaned = -0.00047836 Jy ! Total flux subtracted in 200 components = -0.00047836 Jy ! Clean residual min=-0.005624 max=0.006447 Jy/beam ! Clean residual mean=0.000027 rms=0.001661 Jy/beam ! Combined flux in latest and established models = 0.195136 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 83 components and 0.195136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146134Jy sigma=0.000788 ! Fit after self-cal, rms=0.146102Jy sigma=0.000788 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146102Jy sigma=0.000788 ! Fit after self-cal, rms=0.154305Jy sigma=0.000787 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.013 mas, bmaj=8.428 mas, bpa=34.26 degrees ! Estimated noise=519.125 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.52984e-05 Jy ! Component: 100 - total flux cleaned = -9.41148e-05 Jy ! Component: 150 - total flux cleaned = -9.58549e-05 Jy ! Component: 200 - total flux cleaned = -0.000143765 Jy ! Total flux subtracted in 200 components = -0.000143765 Jy ! Clean residual min=-0.005357 max=0.006073 Jy/beam ! Clean residual mean=0.000027 rms=0.001601 Jy/beam ! Combined flux in latest and established models = 0.194992 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 85 components and 0.194992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154196Jy sigma=0.000787 ! Fit after self-cal, rms=0.154344Jy sigma=0.000787 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000127705 Jy ! Component: 100 - total flux cleaned = -0.000173423 Jy ! Component: 150 - total flux cleaned = -0.000173098 Jy ! Component: 200 - total flux cleaned = -0.000174549 Jy ! Total flux subtracted in 200 components = -0.000174549 Jy ! Clean residual min=-0.005313 max=0.006132 Jy/beam ! Clean residual mean=0.000028 rms=0.001590 Jy/beam ! Combined flux in latest and established models = 0.194817 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 85 components and 0.194817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154272Jy sigma=0.000786 ! Fit after self-cal, rms=0.154286Jy sigma=0.000786 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154286Jy sigma=0.000786 ! Fit after self-cal, rms=0.160813Jy sigma=0.000786 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.138 mas, bmaj=10.8 mas, bpa=19.22 degrees ! Estimated noise=558.304 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000426304 Jy ! Component: 100 - total flux cleaned = 0.000425272 Jy ! Component: 150 - total flux cleaned = 0.00035528 Jy ! Component: 200 - total flux cleaned = 0.000357946 Jy ! Total flux subtracted in 200 components = 0.000357946 Jy ! Clean residual min=-0.006733 max=0.007540 Jy/beam ! Clean residual mean=0.000046 rms=0.002229 Jy/beam ! Combined flux in latest and established models = 0.195175 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 87 components and 0.195175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160727Jy sigma=0.000786 ! Fit after self-cal, rms=0.160790Jy sigma=0.000786 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.09278e-06 Jy ! Component: 100 - total flux cleaned = 7.28085e-06 Jy ! Component: 150 - total flux cleaned = -4.75369e-05 Jy ! Component: 200 - total flux cleaned = -9.2982e-05 Jy ! Total flux subtracted in 200 components = -9.2982e-05 Jy ! Clean residual min=-0.006613 max=0.007520 Jy/beam ! Clean residual mean=0.000047 rms=0.002208 Jy/beam ! Combined flux in latest and established models = 0.195082 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 87 components and 0.195082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160749Jy sigma=0.000786 ! Fit after self-cal, rms=0.160736Jy sigma=0.000785 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.024 mas, bmaj=8.496 mas, bpa=33.1 degrees ! Estimated noise=518.114 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.024 x 8.496 at 33.1 degrees (North through East) ! Clean map min=-0.0049876 max=0.056952 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.854 mas, bmaj=7.755 mas, bpa=35.68 degrees ! Estimated noise=1109.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0583856 Jy ! Component: 100 - total flux cleaned = 0.0962624 Jy ! Component: 150 - total flux cleaned = 0.122539 Jy ! Component: 200 - total flux cleaned = 0.141351 Jy ! Total flux subtracted in 200 components = 0.141351 Jy ! Clean residual min=-0.007675 max=0.014388 Jy/beam ! Clean residual mean=-0.000003 rms=0.002393 Jy/beam ! Combined flux in latest and established models = 0.141351 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 46 model components to the UV plane model. ! The established model now contains 46 components and 0.141351 Jy ! Inverting map and beam ! Estimated beam: bmin=5.024 mas, bmaj=8.496 mas, bpa=33.1 degrees ! Estimated noise=518.114 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.021042 Jy ! Component: 100 - total flux cleaned = 0.0335383 Jy ! Component: 150 - total flux cleaned = 0.0410768 Jy ! Component: 200 - total flux cleaned = 0.0456279 Jy ! Total flux subtracted in 200 components = 0.0456279 Jy ! Clean residual min=-0.006441 max=0.007053 Jy/beam ! Clean residual mean=0.000023 rms=0.001714 Jy/beam ! Combined flux in latest and established models = 0.186979 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 63 components and 0.186979 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.138 mas, bmaj=10.8 mas, bpa=19.22 degrees ! Estimated noise=558.304 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00526824 Jy ! Component: 100 - total flux cleaned = 0.00583896 Jy ! Component: 150 - total flux cleaned = 0.00592675 Jy ! Component: 200 - total flux cleaned = 0.00592728 Jy ! Total flux subtracted in 200 components = 0.00592728 Jy ! Clean residual min=-0.007155 max=0.007775 Jy/beam ! Clean residual mean=0.000044 rms=0.002238 Jy/beam ! Combined flux in latest and established models = 0.192906 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.72566e-05 Jy ! Component: 100 - total flux cleaned = 0.000183747 Jy ! Component: 150 - total flux cleaned = 0.000232785 Jy ! Component: 200 - total flux cleaned = 0.000277864 Jy ! Total flux subtracted in 200 components = 0.000277864 Jy ! Clean residual min=-0.007117 max=0.007827 Jy/beam ! Clean residual mean=0.000045 rms=0.002221 Jy/beam ! Combined flux in latest and established models = 0.193184 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 66 components and 0.193184 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.024 mas, bmaj=8.496 mas, bpa=33.1 degrees ! Estimated noise=518.114 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000768916 Jy ! Component: 100 - total flux cleaned = -0.000765333 Jy ! Component: 150 - total flux cleaned = -0.000836281 Jy ! Component: 200 - total flux cleaned = -0.00083503 Jy ! Total flux subtracted in 200 components = -0.00083503 Jy ! Clean residual min=-0.005599 max=0.006300 Jy/beam ! Clean residual mean=0.000027 rms=0.001613 Jy/beam ! Combined flux in latest and established models = 0.192349 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 79 components and 0.192349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160971Jy sigma=0.000789 ! Fit after self-cal, rms=0.160967Jy sigma=0.000788 wmodel J2005+4428_S_2014_08_09_pus_map.mod ! Writing 79 model components to file: J2005+4428_S_2014_08_09_pus_map.mod wobs J2005+4428_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J2005+4428_S_2014_08_09_pus_uvs.fits wwins J2005+4428_S_2014_08_09_pus_map.win ! wwins: Wrote 1 windows to J2005+4428_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00262134 Jy ! Component: 100 - total flux cleaned = 0.0035109 Jy ! Component: 150 - total flux cleaned = 0.00423926 Jy ! Component: 200 - total flux cleaned = 0.0048351 Jy ! Component: 250 - total flux cleaned = 0.00523837 Jy ! Component: 300 - total flux cleaned = 0.00546972 Jy ! Component: 350 - total flux cleaned = 0.00568884 Jy ! Component: 400 - total flux cleaned = 0.00575974 Jy ! Component: 450 - total flux cleaned = 0.0056929 Jy ! Component: 500 - total flux cleaned = 0.00576133 Jy ! Component: 550 - total flux cleaned = 0.00576259 Jy ! Component: 600 - total flux cleaned = 0.00551227 Jy ! Component: 650 - total flux cleaned = 0.00557217 Jy ! Component: 700 - total flux cleaned = 0.00557191 Jy ! Component: 750 - total flux cleaned = 0.00545678 Jy ! Component: 800 - total flux cleaned = 0.00545801 Jy ! Component: 850 - total flux cleaned = 0.0054582 Jy ! Component: 900 - total flux cleaned = 0.00534866 Jy ! Component: 950 - total flux cleaned = 0.00524151 Jy ! Component: 1000 - total flux cleaned = 0.00508397 Jy ! Component: 1050 - total flux cleaned = 0.00503252 Jy ! Component: 1100 - total flux cleaned = 0.00493159 Jy ! Component: 1150 - total flux cleaned = 0.00498079 Jy ! Component: 1200 - total flux cleaned = 0.00497999 Jy ! Component: 1250 - total flux cleaned = 0.00483647 Jy ! Component: 1300 - total flux cleaned = 0.00483651 Jy ! Component: 1350 - total flux cleaned = 0.0046991 Jy ! Component: 1400 - total flux cleaned = 0.00479028 Jy ! Component: 1450 - total flux cleaned = 0.00474551 Jy ! Component: 1500 - total flux cleaned = 0.00465883 Jy ! Component: 1550 - total flux cleaned = 0.00470163 Jy ! Component: 1600 - total flux cleaned = 0.00457545 Jy ! Component: 1650 - total flux cleaned = 0.00461719 Jy ! Component: 1700 - total flux cleaned = 0.00441274 Jy ! Component: 1750 - total flux cleaned = 0.00441283 Jy ! Component: 1800 - total flux cleaned = 0.00429261 Jy ! Component: 1850 - total flux cleaned = 0.00425206 Jy ! Component: 1900 - total flux cleaned = 0.00413564 Jy ! Component: 1950 - total flux cleaned = 0.00405878 Jy ! Component: 2000 - total flux cleaned = 0.00394581 Jy ! Component: 2050 - total flux cleaned = 0.00390931 Jy ! Component: 2100 - total flux cleaned = 0.00376275 Jy ! Component: 2150 - total flux cleaned = 0.00361856 Jy ! Component: 2200 - total flux cleaned = 0.00347586 Jy ! Component: 2250 - total flux cleaned = 0.00337021 Jy ! Component: 2300 - total flux cleaned = 0.00312602 Jy ! Component: 2350 - total flux cleaned = 0.00302267 Jy ! Component: 2400 - total flux cleaned = 0.00302211 Jy ! Component: 2450 - total flux cleaned = 0.00278552 Jy ! Component: 2500 - total flux cleaned = 0.00261914 Jy ! Component: 2550 - total flux cleaned = 0.00245458 Jy ! Component: 2600 - total flux cleaned = 0.00235654 Jy ! Component: 2650 - total flux cleaned = 0.00209806 Jy ! Component: 2700 - total flux cleaned = 0.00200238 Jy ! Component: 2750 - total flux cleaned = 0.00187584 Jy ! Component: 2800 - total flux cleaned = 0.00168771 Jy ! Component: 2850 - total flux cleaned = 0.0014704 Jy ! Component: 2900 - total flux cleaned = 0.00144016 Jy ! Component: 2950 - total flux cleaned = 0.0012878 Jy ! Component: 3000 - total flux cleaned = 0.00125765 Jy ! Component: 3050 - total flux cleaned = 0.00116768 Jy ! Component: 3100 - total flux cleaned = 0.000901043 Jy ! Component: 3150 - total flux cleaned = 0.000871747 Jy ! Component: 3200 - total flux cleaned = 0.000697198 Jy ! Component: 3250 - total flux cleaned = 0.000639531 Jy ! Component: 3300 - total flux cleaned = 0.000496898 Jy ! Component: 3350 - total flux cleaned = 0.000440363 Jy ! Component: 3400 - total flux cleaned = 0.000355895 Jy ! Component: 3450 - total flux cleaned = 0.000216605 Jy ! Component: 3500 - total flux cleaned = 0.000161298 Jy ! Component: 3550 - total flux cleaned = -5.8044e-05 Jy ! Component: 3600 - total flux cleaned = -5.79302e-05 Jy ! Component: 3650 - total flux cleaned = -0.000219738 Jy ! Component: 3700 - total flux cleaned = -0.000273199 Jy ! Component: 3750 - total flux cleaned = -0.000273277 Jy ! Component: 3800 - total flux cleaned = -0.0004316 Jy ! Component: 3850 - total flux cleaned = -0.000509969 Jy ! Component: 3900 - total flux cleaned = -0.000561959 Jy ! Component: 3950 - total flux cleaned = -0.000664866 Jy ! Component: 4000 - total flux cleaned = -0.000716146 Jy ! Component: 4050 - total flux cleaned = -0.000766883 Jy ! Total flux subtracted in 4096 components = -0.000893022 Jy ! Clean residual min=-0.001269 max=0.001440 Jy/beam ! Clean residual mean=0.000001 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.191456 Jy keep ! Adding 411 model components to the UV plane model. ! The established model now contains 490 components and 0.191456 Jy ![Exited script file: muppet] wmap "J2005+4428_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.024 x 8.496 at 33.1 degrees (North through East) ! Clean map min=-0.0035192 max=0.058823 Jy/beam ! Writing clean map to FITS file: J2005+4428_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0588227 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000524774 device "J2005+4428_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J2005+4428_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.67639 2.67639 5.35277 10.7055 21.4111 42.8222 85.6443 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.058 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.024 x 8.496 at 33.1 degrees (North through East) ! Clean map min=-0.0035192 max=0.058823 Jy/beam quit ! Quitting program ! Log file J2005+4428_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 23:14:28 2016