! Started logfile: J2000-1748_S_2014_06_09_pus_uvs.log on Wed Nov 16 20:03:45 2016
obs J2000-1748_S_2014_06_09_pus_uva.fits
! Reading UV FITS file: J2000-1748_S_2014_06_09_pus_uva.fits
! AN table 1: 30 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.577778 visibilities/baseline/integration-bin.
! Found source: J2000-1748
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 336 lines of history.
! 
! Reading 3120 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J2000-1748_S_2014_06_09_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.272308Jy  sigma=0.002698
! Fit after  self-cal, rms=0.209580Jy  sigma=0.002081
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.198 mas, bmaj=12.42 mas, bpa=22.03 degrees
! Estimated noise=1949.17 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.88948 Jy
! Component: 100  -  total flux cleaned = 1.08344 Jy
! Total flux subtracted in 100 components = 1.08344 Jy
! Clean residual min=-0.029991 max=0.054096 Jy/beam
! Clean residual mean=-0.000061 rms=0.009262 Jy/beam
! Combined flux in latest and established models = 1.08344 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1.08344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.166399Jy  sigma=0.001661
! Fit after  self-cal, rms=0.166398Jy  sigma=0.001661
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.149 mas, bmaj=14.03 mas, bpa=19.4 degrees
! Estimated noise=1228.37 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0492392 Jy
! Component: 100  -  total flux cleaned = 0.0705603 Jy
! Component: 150  -  total flux cleaned = 0.0817682 Jy
! Component: 200  -  total flux cleaned = 0.088175 Jy
! Total flux subtracted in 200 components = 0.088175 Jy
! Clean residual min=-0.021122 max=0.020660 Jy/beam
! Clean residual mean=0.000073 rms=0.005475 Jy/beam
! Combined flux in latest and established models = 1.17162 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 36 components and 1.17162 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150697Jy  sigma=0.001546
! Fit after  self-cal, rms=0.150705Jy  sigma=0.001546
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.85     HN        1.01     KP        1.05     
!   LA        1.20     MK        1.00*    NL        0.97     OV        0.97     
!   PT        1.02     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.01     HN        1.05     KP        1.02     
!   LA        1.15     MK        1.00*    NL        1.07     OV        1.00     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.14     HN        1.05     KP        0.91     
!   LA        0.91     MK        1.00*    NL        0.96     OV        0.93     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00     HN        1.03     KP        0.87     
!   LA        0.87     MK        1.00*    NL        1.02     OV        0.99     
!   PT        1.01     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.150705Jy  sigma=0.001546
! Fit after  self-cal, rms=0.084305Jy  sigma=0.000806
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.14 mas, bmaj=14.1 mas, bpa=19.48 degrees
! Estimated noise=1225.85 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00630866 Jy
! Component: 100  -  total flux cleaned = -0.00582186 Jy
! Component: 150  -  total flux cleaned = -0.00545295 Jy
! Component: 200  -  total flux cleaned = -0.00523123 Jy
! Total flux subtracted in 200 components = -0.00523123 Jy
! Clean residual min=-0.007204 max=0.006590 Jy/beam
! Clean residual mean=-0.000007 rms=0.001754 Jy/beam
! Combined flux in latest and established models = 1.16639 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 49 components and 1.16639 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083399Jy  sigma=0.000801
! Fit after  self-cal, rms=0.083408Jy  sigma=0.000800
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083408Jy  sigma=0.000800
! Fit after  self-cal, rms=0.083160Jy  sigma=0.000798
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.137 mas, bmaj=14.13 mas, bpa=19.51 degrees
! Estimated noise=1224.86 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00420943 Jy
! Component: 100  -  total flux cleaned = -0.0039738 Jy
! Component: 150  -  total flux cleaned = -0.00368439 Jy
! Component: 200  -  total flux cleaned = -0.00351108 Jy
! Total flux subtracted in 200 components = -0.00351108 Jy
! Clean residual min=-0.006008 max=0.005796 Jy/beam
! Clean residual mean=-0.000005 rms=0.001566 Jy/beam
! Combined flux in latest and established models = 1.16288 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 54 components and 1.16288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082668Jy  sigma=0.000795
! Fit after  self-cal, rms=0.082669Jy  sigma=0.000795
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000156663 Jy
! Component: 100  -  total flux cleaned = 0.00022977 Jy
! Component: 150  -  total flux cleaned = 0.000363741 Jy
! Component: 200  -  total flux cleaned = 0.000427947 Jy
! Total flux subtracted in 200 components = 0.000427947 Jy
! Clean residual min=-0.005943 max=0.005706 Jy/beam
! Clean residual mean=-0.000005 rms=0.001549 Jy/beam
! Combined flux in latest and established models = 1.1633 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 57 components and 1.1633 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082537Jy  sigma=0.000794
! Fit after  self-cal, rms=0.082536Jy  sigma=0.000794
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082536Jy  sigma=0.000794
! Fit after  self-cal, rms=0.079913Jy  sigma=0.000768
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.136 mas, bmaj=14.15 mas, bpa=19.53 degrees
! Estimated noise=1224.08 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00345486 Jy
! Component: 100  -  total flux cleaned = -0.00330983 Jy
! Component: 150  -  total flux cleaned = -0.00324505 Jy
! Component: 200  -  total flux cleaned = -0.00324431 Jy
! Total flux subtracted in 200 components = -0.00324431 Jy
! Clean residual min=-0.004310 max=0.003848 Jy/beam
! Clean residual mean=-0.000004 rms=0.001038 Jy/beam
! Combined flux in latest and established models = 1.16006 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 62 components and 1.16006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079680Jy  sigma=0.000767
! Fit after  self-cal, rms=0.079681Jy  sigma=0.000767
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.55466e-05 Jy
! Component: 100  -  total flux cleaned = 8.59745e-05 Jy
! Component: 150  -  total flux cleaned = 0.000123521 Jy
! Component: 200  -  total flux cleaned = 0.000191564 Jy
! Total flux subtracted in 200 components = 0.000191564 Jy
! Clean residual min=-0.004277 max=0.003831 Jy/beam
! Clean residual mean=-0.000004 rms=0.001033 Jy/beam
! Combined flux in latest and established models = 1.16025 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 66 components and 1.16025 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079634Jy  sigma=0.000766
! Fit after  self-cal, rms=0.079634Jy  sigma=0.000766
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079634Jy  sigma=0.000766
! Fit after  self-cal, rms=0.079582Jy  sigma=0.000765
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.995 mas, bmaj=21.78 mas, bpa=3.833 degrees
! Estimated noise=1347.22 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00202984 Jy
! Component: 100  -  total flux cleaned = -0.00238754 Jy
! Component: 150  -  total flux cleaned = -0.00241393 Jy
! Component: 200  -  total flux cleaned = -0.00243683 Jy
! Total flux subtracted in 200 components = -0.00243683 Jy
! Clean residual min=-0.003585 max=0.003456 Jy/beam
! Clean residual mean=-0.000007 rms=0.001011 Jy/beam
! Combined flux in latest and established models = 1.15782 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 77 components and 1.15782 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079505Jy  sigma=0.000765
! Fit after  self-cal, rms=0.079507Jy  sigma=0.000765
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.49209e-05 Jy
! Component: 100  -  total flux cleaned = 6.48306e-05 Jy
! Component: 150  -  total flux cleaned = 6.46732e-05 Jy
! Component: 200  -  total flux cleaned = 8.23134e-05 Jy
! Total flux subtracted in 200 components = 8.23134e-05 Jy
! Clean residual min=-0.003543 max=0.003485 Jy/beam
! Clean residual mean=-0.000007 rms=0.001009 Jy/beam
! Combined flux in latest and established models = 1.1579 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 77 components and 1.1579 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079495Jy  sigma=0.000765
! Fit after  self-cal, rms=0.079494Jy  sigma=0.000765
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.135 mas, bmaj=14.16 mas, bpa=19.55 degrees
! Estimated noise=1223.62 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.135 x 14.16 at 19.55 degrees (North through East)
! Clean map  min=-0.0036847  max=1.1212 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079494Jy  sigma=0.000765
! Fit after  self-cal, rms=0.073679Jy  sigma=0.000699
! Inverting map and beam 
! Estimated beam: bmin=4.136 mas, bmaj=14.18 mas, bpa=19.55 degrees
! Estimated noise=1223.4 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00188692 Jy
! Component: 100  -  total flux cleaned = -0.00198145 Jy
! Component: 150  -  total flux cleaned = -0.00202126 Jy
! Component: 200  -  total flux cleaned = -0.00198868 Jy
! Total flux subtracted in 200 components = -0.00198868 Jy
! Clean residual min=-0.003441 max=0.003418 Jy/beam
! Clean residual mean=-0.000005 rms=0.000894 Jy/beam
! Combined flux in latest and established models = 1.15591 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 80 components and 1.15591 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073590Jy  sigma=0.000698
! Fit after  self-cal, rms=0.073589Jy  sigma=0.000698
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.27309e-05 Jy
! Component: 100  -  total flux cleaned = 6.81888e-05 Jy
! Component: 150  -  total flux cleaned = 9.35408e-05 Jy
! Component: 200  -  total flux cleaned = 9.46314e-05 Jy
! Total flux subtracted in 200 components = 9.46314e-05 Jy
! Clean residual min=-0.003423 max=0.003353 Jy/beam
! Clean residual mean=-0.000005 rms=0.000892 Jy/beam
! Combined flux in latest and established models = 1.156 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 82 components and 1.156 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073565Jy  sigma=0.000698
! Fit after  self-cal, rms=0.073565Jy  sigma=0.000698
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073565Jy  sigma=0.000698
! Fit after  self-cal, rms=0.073569Jy  sigma=0.000698
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.187 mas, bmaj=12.55 mas, bpa=22.06 degrees
! Estimated noise=1923.02 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.877537 Jy
! Component: 100  -  total flux cleaned = 1.0689 Jy
! Component: 150  -  total flux cleaned = 1.11214 Jy
! Component: 200  -  total flux cleaned = 1.12995 Jy
! Total flux subtracted in 200 components = 1.12995 Jy
! Clean residual min=-0.007647 max=0.008548 Jy/beam
! Clean residual mean=-0.000026 rms=0.001788 Jy/beam
! Combined flux in latest and established models = 1.12995 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 1.12995 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.136 mas, bmaj=14.19 mas, bpa=19.56 degrees
! Estimated noise=1223.12 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.012043 Jy
! Component: 100  -  total flux cleaned = 0.01796 Jy
! Component: 150  -  total flux cleaned = 0.0212276 Jy
! Component: 200  -  total flux cleaned = 0.021838 Jy
! Total flux subtracted in 200 components = 0.021838 Jy
! Clean residual min=-0.003438 max=0.003816 Jy/beam
! Clean residual mean=-0.000010 rms=0.000912 Jy/beam
! Combined flux in latest and established models = 1.15179 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 32 components and 1.15179 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.004 mas, bmaj=21.81 mas, bpa=3.855 degrees
! Estimated noise=1345.59 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00166524 Jy
! Component: 100  -  total flux cleaned = 0.0019788 Jy
! Component: 150  -  total flux cleaned = 0.00208833 Jy
! Component: 200  -  total flux cleaned = 0.00215945 Jy
! Total flux subtracted in 200 components = 0.00215945 Jy
! Clean residual min=-0.002979 max=0.003068 Jy/beam
! Clean residual mean=-0.000011 rms=0.000910 Jy/beam
! Combined flux in latest and established models = 1.15395 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.30594e-05 Jy
! Component: 100  -  total flux cleaned = 4.32116e-05 Jy
! Component: 150  -  total flux cleaned = 6.20838e-05 Jy
! Component: 200  -  total flux cleaned = 6.0526e-05 Jy
! Total flux subtracted in 200 components = 6.0526e-05 Jy
! Clean residual min=-0.002980 max=0.003080 Jy/beam
! Clean residual mean=-0.000011 rms=0.000906 Jy/beam
! Combined flux in latest and established models = 1.15401 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 49 components and 1.15401 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.136 mas, bmaj=14.19 mas, bpa=19.56 degrees
! Estimated noise=1223.12 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000243758 Jy
! Component: 100  -  total flux cleaned = 0.000199658 Jy
! Component: 150  -  total flux cleaned = 8.18061e-05 Jy
! Component: 200  -  total flux cleaned = -1.30232e-05 Jy
! Total flux subtracted in 200 components = -1.30232e-05 Jy
! Clean residual min=-0.003186 max=0.003648 Jy/beam
! Clean residual mean=-0.000005 rms=0.000859 Jy/beam
! Combined flux in latest and established models = 1.154 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 57 components and 1.154 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073520Jy  sigma=0.000697
! Fit after  self-cal, rms=0.073522Jy  sigma=0.000697
wmodel J2000-1748_S_2014_06_09_pus_map.mod
! Writing 57 model components to file: J2000-1748_S_2014_06_09_pus_map.mod
wobs J2000-1748_S_2014_06_09_pus_uvs.fits
! Writing UV FITS file: J2000-1748_S_2014_06_09_pus_uvs.fits
wwins J2000-1748_S_2014_06_09_pus_map.win
! wwins: Wrote 1 windows to J2000-1748_S_2014_06_09_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000973187 Jy
! Component: 100  -  total flux cleaned = 0.00146613 Jy
! Component: 150  -  total flux cleaned = 0.00192462 Jy
! Component: 200  -  total flux cleaned = 0.00211607 Jy
! Component: 250  -  total flux cleaned = 0.00229925 Jy
! Component: 300  -  total flux cleaned = 0.00247408 Jy
! Component: 350  -  total flux cleaned = 0.00264349 Jy
! Component: 400  -  total flux cleaned = 0.00284803 Jy
! Component: 450  -  total flux cleaned = 0.00300579 Jy
! Component: 500  -  total flux cleaned = 0.003081 Jy
! Component: 550  -  total flux cleaned = 0.00311798 Jy
! Component: 600  -  total flux cleaned = 0.00311783 Jy
! Component: 650  -  total flux cleaned = 0.0031172 Jy
! Component: 700  -  total flux cleaned = 0.00311721 Jy
! Component: 750  -  total flux cleaned = 0.00301684 Jy
! Component: 800  -  total flux cleaned = 0.00311613 Jy
! Component: 850  -  total flux cleaned = 0.00308305 Jy
! Component: 900  -  total flux cleaned = 0.00305 Jy
! Component: 950  -  total flux cleaned = 0.00295633 Jy
! Component: 1000  -  total flux cleaned = 0.00292552 Jy
! Component: 1050  -  total flux cleaned = 0.00280528 Jy
! Component: 1100  -  total flux cleaned = 0.0027761 Jy
! Component: 1150  -  total flux cleaned = 0.0028053 Jy
! Component: 1200  -  total flux cleaned = 0.00274723 Jy
! Component: 1250  -  total flux cleaned = 0.00269126 Jy
! Component: 1300  -  total flux cleaned = 0.00271909 Jy
! Component: 1350  -  total flux cleaned = 0.00266446 Jy
! Component: 1400  -  total flux cleaned = 0.00266425 Jy
! Component: 1450  -  total flux cleaned = 0.00261089 Jy
! Component: 1500  -  total flux cleaned = 0.00250621 Jy
! Component: 1550  -  total flux cleaned = 0.00248072 Jy
! Component: 1600  -  total flux cleaned = 0.0024301 Jy
! Component: 1650  -  total flux cleaned = 0.00245518 Jy
! Component: 1700  -  total flux cleaned = 0.00243086 Jy
! Component: 1750  -  total flux cleaned = 0.00250392 Jy
! Component: 1800  -  total flux cleaned = 0.00245586 Jy
! Component: 1850  -  total flux cleaned = 0.00245589 Jy
! Component: 1900  -  total flux cleaned = 0.00245539 Jy
! Component: 1950  -  total flux cleaned = 0.00240924 Jy
! Component: 2000  -  total flux cleaned = 0.00238661 Jy
! Component: 2050  -  total flux cleaned = 0.00236412 Jy
! Component: 2100  -  total flux cleaned = 0.00231978 Jy
! Component: 2150  -  total flux cleaned = 0.00223177 Jy
! Component: 2200  -  total flux cleaned = 0.00218806 Jy
! Component: 2250  -  total flux cleaned = 0.00216644 Jy
! Component: 2300  -  total flux cleaned = 0.00212364 Jy
! Component: 2350  -  total flux cleaned = 0.00208126 Jy
! Component: 2400  -  total flux cleaned = 0.00210223 Jy
! Component: 2450  -  total flux cleaned = 0.00197801 Jy
! Component: 2500  -  total flux cleaned = 0.00199832 Jy
! Component: 2550  -  total flux cleaned = 0.00193714 Jy
! Component: 2600  -  total flux cleaned = 0.00193717 Jy
! Component: 2650  -  total flux cleaned = 0.00187712 Jy
! Component: 2700  -  total flux cleaned = 0.00185741 Jy
! Component: 2750  -  total flux cleaned = 0.00179876 Jy
! Component: 2800  -  total flux cleaned = 0.00181805 Jy
! Component: 2850  -  total flux cleaned = 0.0016642 Jy
! Component: 2900  -  total flux cleaned = 0.00170245 Jy
! Component: 2950  -  total flux cleaned = 0.0016459 Jy
! Component: 3000  -  total flux cleaned = 0.00160864 Jy
! Component: 3050  -  total flux cleaned = 0.00151596 Jy
! Component: 3100  -  total flux cleaned = 0.00146077 Jy
! Component: 3150  -  total flux cleaned = 0.00136984 Jy
! Component: 3200  -  total flux cleaned = 0.00133355 Jy
! Component: 3250  -  total flux cleaned = 0.00124393 Jy
! Component: 3300  -  total flux cleaned = 0.00117294 Jy
! Component: 3350  -  total flux cleaned = 0.00101426 Jy
! Component: 3400  -  total flux cleaned = 0.00108411 Jy
! Component: 3450  -  total flux cleaned = 0.000927922 Jy
! Component: 3500  -  total flux cleaned = 0.000893608 Jy
! Component: 3550  -  total flux cleaned = 0.000791068 Jy
! Component: 3600  -  total flux cleaned = 0.000740309 Jy
! Component: 3650  -  total flux cleaned = 0.000723395 Jy
! Component: 3700  -  total flux cleaned = 0.000689816 Jy
! Component: 3750  -  total flux cleaned = 0.000623232 Jy
! Component: 3800  -  total flux cleaned = 0.000540604 Jy
! Component: 3850  -  total flux cleaned = 0.000458751 Jy
! Component: 3900  -  total flux cleaned = 0.000442489 Jy
! Component: 3950  -  total flux cleaned = 0.000394086 Jy
! Component: 4000  -  total flux cleaned = 0.000345969 Jy
! Component: 4050  -  total flux cleaned = 0.000346044 Jy
! Total flux subtracted in 4096 components = 0.00033031 Jy
! Clean residual min=-0.000876 max=0.000927 Jy/beam
! Clean residual mean=-0.000003 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 1.15433 Jy
keep
! Adding 248 model components to the UV plane model.
! The established model now contains 305 components and 1.15433 Jy
![Exited script file: muppet]
wmap "J2000-1748_S_2014_06_09_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.136 x 14.19 at 19.56 degrees (North through East)
! Clean map  min=-0.002792  max=1.1199 Jy/beam
! Writing clean map to FITS file: J2000-1748_S_2014_06_09_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.11985 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000295129 
device "J2000-1748_S_2014_06_09_pus\_map.eps/VPS"
! Attempting to open device: 'J2000-1748_S_2014_06_09_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.079063 0.079063 0.158126 0.316252 0.632504 1.26501 2.53002 5.06003 10.1201 20.2401 40.4803 80.9605
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0008 
print "peak=",int(1000*peak_flux)/1000
! peak= 1.119 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.136 x 14.19 at 19.56 degrees (North through East)
! Clean map  min=-0.002792  max=1.1199 Jy/beam
quit
! Quitting program
! Log file J2000-1748_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 20:03:50 2016