! Started logfile: J1951-1830_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:38:28 2016 obs J1951-1830_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J1951-1830_S_2014_08_05_pus_uva.fits ! AN table 1: 121 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.787328 visibilities/baseline/integration-bin. ! Found source: J1951-1830 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 17148 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1951-1830_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.952770Jy sigma=0.008873 ! Fit after self-cal, rms=0.893187Jy sigma=0.008339 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.122 mas, bmaj=12.29 mas, bpa=23.44 degrees ! Estimated noise=950.704 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0841356 Jy ! Component: 100 - total flux cleaned = 0.102911 Jy ! Total flux subtracted in 100 components = 0.102911 Jy ! Clean residual min=-0.005039 max=0.006616 Jy/beam ! Clean residual mean=-0.000016 rms=0.001412 Jy/beam ! Combined flux in latest and established models = 0.102911 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.102911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095483Jy sigma=0.000792 ! Fit after self-cal, rms=0.095461Jy sigma=0.000792 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.982 mas, bmaj=13.86 mas, bpa=21.91 degrees ! Estimated noise=591.762 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00954467 Jy ! Component: 100 - total flux cleaned = 0.0144167 Jy ! Component: 150 - total flux cleaned = 0.0173131 Jy ! Component: 200 - total flux cleaned = 0.0190916 Jy ! Total flux subtracted in 200 components = 0.0190916 Jy ! Clean residual min=-0.002929 max=0.003258 Jy/beam ! Clean residual mean=-0.000005 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.122003 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 64 components and 0.122003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094453Jy sigma=0.000783 ! Fit after self-cal, rms=0.094476Jy sigma=0.000783 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.88 HN 1.06 KP 1.06 ! LA 1.14 MK 1.00* NL 0.94 OV 0.96 ! PT 1.03 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.04 HN 1.12 KP 1.01 ! LA 1.03 MK 1.00* NL 1.01 OV 1.02 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.13 HN 1.11 KP 0.92 ! LA 0.85 MK 1.00* NL 1.00 OV 0.95 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 1.09 KP 0.93 ! LA 0.81 MK 1.00* NL 1.03 OV 1.02 ! PT 1.02 SC 0.98 ! ! ! Fit before self-cal, rms=0.094476Jy sigma=0.000783 ! Fit after self-cal, rms=0.093048Jy sigma=0.000777 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.005 mas, bmaj=14.08 mas, bpa=22.15 degrees ! Estimated noise=590.275 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00136189 Jy ! Component: 100 - total flux cleaned = -0.00172645 Jy ! Component: 150 - total flux cleaned = -0.00196666 Jy ! Component: 200 - total flux cleaned = -0.0021745 Jy ! Total flux subtracted in 200 components = -0.0021745 Jy ! Clean residual min=-0.002516 max=0.002536 Jy/beam ! Clean residual mean=-0.000002 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.119828 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 79 components and 0.119828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093013Jy sigma=0.000776 ! Fit after self-cal, rms=0.093024Jy sigma=0.000776 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093024Jy sigma=0.000776 ! Fit after self-cal, rms=0.094619Jy sigma=0.000773 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.007 mas, bmaj=14.06 mas, bpa=22.04 degrees ! Estimated noise=592.212 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000333042 Jy ! Component: 100 - total flux cleaned = -0.000559907 Jy ! Component: 150 - total flux cleaned = -0.000728274 Jy ! Component: 200 - total flux cleaned = -0.00088867 Jy ! Total flux subtracted in 200 components = -0.00088867 Jy ! Clean residual min=-0.001754 max=0.001851 Jy/beam ! Clean residual mean=-0.000000 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.118939 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 95 components and 0.118939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094606Jy sigma=0.000773 ! Fit after self-cal, rms=0.094647Jy sigma=0.000773 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000171092 Jy ! Component: 100 - total flux cleaned = -0.000280988 Jy ! Component: 150 - total flux cleaned = -0.000375796 Jy ! Component: 200 - total flux cleaned = -0.000428553 Jy ! Total flux subtracted in 200 components = -0.000428553 Jy ! Clean residual min=-0.001766 max=0.001820 Jy/beam ! Clean residual mean=-0.000001 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.118511 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 103 components and 0.118511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094643Jy sigma=0.000773 ! Fit after self-cal, rms=0.094643Jy sigma=0.000773 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094643Jy sigma=0.000773 ! Fit after self-cal, rms=0.096299Jy sigma=0.000772 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.006 mas, bmaj=14.07 mas, bpa=22.02 degrees ! Estimated noise=592.261 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000542703 Jy ! Component: 100 - total flux cleaned = -0.000631318 Jy ! Component: 150 - total flux cleaned = -0.00064568 Jy ! Component: 200 - total flux cleaned = -0.000671636 Jy ! Total flux subtracted in 200 components = -0.000671636 Jy ! Clean residual min=-0.001677 max=0.001741 Jy/beam ! Clean residual mean=0.000001 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.117839 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 112 components and 0.117839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096292Jy sigma=0.000772 ! Fit after self-cal, rms=0.096321Jy sigma=0.000772 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (21, 106.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103548 Jy ! Component: 100 - total flux cleaned = 0.00114263 Jy ! Component: 150 - total flux cleaned = 0.00111055 Jy ! Component: 200 - total flux cleaned = 0.00105297 Jy ! Total flux subtracted in 200 components = 0.00105297 Jy ! Clean residual min=-0.001576 max=0.001399 Jy/beam ! Clean residual mean=-0.000000 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.118892 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 135 components and 0.118892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096282Jy sigma=0.000771 ! Fit after self-cal, rms=0.096282Jy sigma=0.000771 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096282Jy sigma=0.000771 ! Fit after self-cal, rms=0.096750Jy sigma=0.000771 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.97 mas, bmaj=18.91 mas, bpa=12.81 degrees ! Estimated noise=657.436 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000339477 Jy ! Component: 100 - total flux cleaned = 0.000340971 Jy ! Component: 150 - total flux cleaned = 0.000341241 Jy ! Component: 200 - total flux cleaned = 0.000276515 Jy ! Total flux subtracted in 200 components = 0.000276515 Jy ! Clean residual min=-0.001305 max=0.001395 Jy/beam ! Clean residual mean=0.000001 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.119169 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 151 components and 0.119169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096740Jy sigma=0.000771 ! Fit after self-cal, rms=0.096750Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.10793e-05 Jy ! Component: 100 - total flux cleaned = 7.59157e-05 Jy ! Component: 150 - total flux cleaned = 3.4325e-05 Jy ! Component: 200 - total flux cleaned = 7.8428e-06 Jy ! Total flux subtracted in 200 components = 7.8428e-06 Jy ! Clean residual min=-0.001298 max=0.001354 Jy/beam ! Clean residual mean=0.000000 rms=0.000378 Jy/beam ! Combined flux in latest and established models = 0.119177 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 164 components and 0.119177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096744Jy sigma=0.000771 ! Fit after self-cal, rms=0.096744Jy sigma=0.000771 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.007 mas, bmaj=14.09 mas, bpa=22.03 degrees ! Estimated noise=592.207 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.007 x 14.09 at 22.03 degrees (North through East) ! Clean map min=-0.0014722 max=0.11036 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.117 mas, bmaj=12.45 mas, bpa=23.53 degrees ! Estimated noise=957.829 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0846076 Jy ! Component: 100 - total flux cleaned = 0.103606 Jy ! Component: 150 - total flux cleaned = 0.110816 Jy ! Component: 200 - total flux cleaned = 0.114484 Jy ! Total flux subtracted in 200 components = 0.114484 Jy ! Clean residual min=-0.003553 max=0.002725 Jy/beam ! Clean residual mean=-0.000002 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.114484 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.114484 Jy ! Inverting map and beam ! Estimated beam: bmin=4.007 mas, bmaj=14.09 mas, bpa=22.03 degrees ! Estimated noise=592.207 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256108 Jy ! Component: 100 - total flux cleaned = 0.00370799 Jy ! Component: 150 - total flux cleaned = 0.00421185 Jy ! Component: 200 - total flux cleaned = 0.0044468 Jy ! Total flux subtracted in 200 components = 0.0044468 Jy ! Clean residual min=-0.001599 max=0.001414 Jy/beam ! Clean residual mean=-0.000001 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.118931 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 59 components and 0.118931 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.97 mas, bmaj=18.91 mas, bpa=12.81 degrees ! Estimated noise=657.436 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000548175 Jy ! Component: 100 - total flux cleaned = 0.000610465 Jy ! Component: 150 - total flux cleaned = 0.000588602 Jy ! Component: 200 - total flux cleaned = 0.000506235 Jy ! Total flux subtracted in 200 components = 0.000506235 Jy ! Clean residual min=-0.001309 max=0.001486 Jy/beam ! Clean residual mean=-0.000001 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.119437 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.68846e-05 Jy ! Component: 100 - total flux cleaned = -5.39472e-05 Jy ! Component: 150 - total flux cleaned = -5.41914e-05 Jy ! Component: 200 - total flux cleaned = -8.37803e-05 Jy ! Total flux subtracted in 200 components = -8.37803e-05 Jy ! Clean residual min=-0.001266 max=0.001446 Jy/beam ! Clean residual mean=-0.000001 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.119353 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 103 components and 0.119353 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.007 mas, bmaj=14.09 mas, bpa=22.03 degrees ! Estimated noise=592.207 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000197471 Jy ! Component: 100 - total flux cleaned = 0.000197712 Jy ! Component: 150 - total flux cleaned = 0.000151325 Jy ! Component: 200 - total flux cleaned = 0.000151457 Jy ! Total flux subtracted in 200 components = 0.000151457 Jy ! Clean residual min=-0.001481 max=0.001403 Jy/beam ! Clean residual mean=-0.000000 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.119505 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 123 components and 0.119505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096745Jy sigma=0.000771 ! Fit after self-cal, rms=0.096730Jy sigma=0.000771 wmodel J1951-1830_S_2014_08_05_pus_map.mod ! Writing 123 model components to file: J1951-1830_S_2014_08_05_pus_map.mod wobs J1951-1830_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J1951-1830_S_2014_08_05_pus_uvs.fits wwins J1951-1830_S_2014_08_05_pus_map.win ! wwins: Wrote 2 windows to J1951-1830_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000307162 Jy ! Component: 100 - total flux cleaned = -0.000282204 Jy ! Component: 150 - total flux cleaned = -0.000259065 Jy ! Component: 200 - total flux cleaned = -0.000259115 Jy ! Component: 250 - total flux cleaned = -0.000258587 Jy ! Component: 300 - total flux cleaned = -0.000199675 Jy ! Component: 350 - total flux cleaned = -0.000180577 Jy ! Component: 400 - total flux cleaned = -0.000162279 Jy ! Component: 450 - total flux cleaned = -0.000180233 Jy ! Component: 500 - total flux cleaned = -0.000197385 Jy ! Component: 550 - total flux cleaned = -0.00026466 Jy ! Component: 600 - total flux cleaned = -0.000313508 Jy ! Component: 650 - total flux cleaned = -0.000313565 Jy ! Component: 700 - total flux cleaned = -0.000313866 Jy ! Component: 750 - total flux cleaned = -0.000360687 Jy ! Component: 800 - total flux cleaned = -0.000376225 Jy ! Component: 850 - total flux cleaned = -0.000451262 Jy ! Component: 900 - total flux cleaned = -0.000465897 Jy ! Component: 950 - total flux cleaned = -0.00045131 Jy ! Component: 1000 - total flux cleaned = -0.000494302 Jy ! Component: 1050 - total flux cleaned = -0.000508662 Jy ! Component: 1100 - total flux cleaned = -0.000550515 Jy ! Component: 1150 - total flux cleaned = -0.00059186 Jy ! Component: 1200 - total flux cleaned = -0.000632813 Jy ! Component: 1250 - total flux cleaned = -0.000632831 Jy ! Component: 1300 - total flux cleaned = -0.000619719 Jy ! Component: 1350 - total flux cleaned = -0.000659014 Jy ! Component: 1400 - total flux cleaned = -0.000620257 Jy ! Component: 1450 - total flux cleaned = -0.000671712 Jy ! Component: 1500 - total flux cleaned = -0.000696946 Jy ! Component: 1550 - total flux cleaned = -0.000709381 Jy ! Component: 1600 - total flux cleaned = -0.00065988 Jy ! Component: 1650 - total flux cleaned = -0.000697031 Jy ! Component: 1700 - total flux cleaned = -0.000697256 Jy ! Component: 1750 - total flux cleaned = -0.000721462 Jy ! Component: 1800 - total flux cleaned = -0.000661914 Jy ! Component: 1850 - total flux cleaned = -0.000709218 Jy ! Component: 1900 - total flux cleaned = -0.000732599 Jy ! Component: 1950 - total flux cleaned = -0.000709558 Jy ! Component: 2000 - total flux cleaned = -0.000732604 Jy ! Component: 2050 - total flux cleaned = -0.000743985 Jy ! Component: 2100 - total flux cleaned = -0.000721279 Jy ! Component: 2150 - total flux cleaned = -0.000743726 Jy ! Component: 2200 - total flux cleaned = -0.000710619 Jy ! Component: 2250 - total flux cleaned = -0.000765742 Jy ! Component: 2300 - total flux cleaned = -0.00075481 Jy ! Component: 2350 - total flux cleaned = -0.000711383 Jy ! Component: 2400 - total flux cleaned = -0.000689934 Jy ! Component: 2450 - total flux cleaned = -0.000647429 Jy ! Component: 2500 - total flux cleaned = -0.000658114 Jy ! Component: 2550 - total flux cleaned = -0.000637123 Jy ! Component: 2600 - total flux cleaned = -0.000668426 Jy ! Component: 2650 - total flux cleaned = -0.000647833 Jy ! Component: 2700 - total flux cleaned = -0.000699178 Jy ! Component: 2750 - total flux cleaned = -0.00071947 Jy ! Component: 2800 - total flux cleaned = -0.000729594 Jy ! Component: 2850 - total flux cleaned = -0.000759603 Jy ! Component: 2900 - total flux cleaned = -0.000779499 Jy ! Component: 2950 - total flux cleaned = -0.000779413 Jy ! Component: 3000 - total flux cleaned = -0.000779489 Jy ! Component: 3050 - total flux cleaned = -0.000789274 Jy ! Component: 3100 - total flux cleaned = -0.000808716 Jy ! Component: 3150 - total flux cleaned = -0.000808648 Jy ! Component: 3200 - total flux cleaned = -0.000818256 Jy ! Component: 3250 - total flux cleaned = -0.000827555 Jy ! Component: 3300 - total flux cleaned = -0.00078046 Jy ! Component: 3350 - total flux cleaned = -0.000846006 Jy ! Component: 3400 - total flux cleaned = -0.000864457 Jy ! Component: 3450 - total flux cleaned = -0.0008644 Jy ! Component: 3500 - total flux cleaned = -0.00086444 Jy ! Component: 3550 - total flux cleaned = -0.000837004 Jy ! Component: 3600 - total flux cleaned = -0.000846074 Jy ! Component: 3650 - total flux cleaned = -0.000873085 Jy ! Component: 3700 - total flux cleaned = -0.000846165 Jy ! Component: 3750 - total flux cleaned = -0.000855095 Jy ! Component: 3800 - total flux cleaned = -0.000846298 Jy ! Component: 3850 - total flux cleaned = -0.000890235 Jy ! Component: 3900 - total flux cleaned = -0.000898917 Jy ! Component: 3950 - total flux cleaned = -0.000907575 Jy ! Component: 4000 - total flux cleaned = -0.000942058 Jy ! Component: 4050 - total flux cleaned = -0.000950677 Jy ! Total flux subtracted in 4096 components = -0.00095923 Jy ! Clean residual min=-0.000603 max=0.000481 Jy/beam ! Clean residual mean=-0.000001 rms=0.000166 Jy/beam ! Combined flux in latest and established models = 0.118545 Jy keep ! Adding 283 model components to the UV plane model. ! The established model now contains 406 components and 0.118545 Jy ![Exited script file: muppet] wmap "J1951-1830_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.007 x 14.09 at 22.03 degrees (North through East) ! Clean map min=-0.0013326 max=0.11057 Jy/beam ! Writing clean map to FITS file: J1951-1830_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.110568 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000165066 device "J1951-1830_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J1951-1830_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.447866 0.447866 0.895733 1.79147 3.58293 7.16586 14.3317 28.6635 57.3269 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.11 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.007 x 14.09 at 22.03 degrees (North through East) ! Clean map min=-0.0013326 max=0.11057 Jy/beam quit ! Quitting program ! Log file J1951-1830_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:38:33 2016