! Started logfile: J1951-0509_S_2014_08_09_pus_uvs.log on Tue Nov 29 23:13:47 2016 obs J1951-0509_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J1951-0509_S_2014_08_09_pus_uva.fits ! AN table 1: 57 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.667836 visibilities/baseline/integration-bin. ! Found source: J1951-0509 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 6852 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1951-0509_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 104 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 104 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 104 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 104 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.928454Jy sigma=0.009823 ! Fit after self-cal, rms=0.915712Jy sigma=0.009717 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.263 mas, bmaj=9.659 mas, bpa=17.21 degrees ! Estimated noise=996.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0665388 Jy ! Component: 100 - total flux cleaned = 0.0812874 Jy ! Total flux subtracted in 100 components = 0.0812874 Jy ! Clean residual min=-0.004896 max=0.005056 Jy/beam ! Clean residual mean=0.000004 rms=0.001137 Jy/beam ! Combined flux in latest and established models = 0.0812874 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0812874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090044Jy sigma=0.000815 ! Fit after self-cal, rms=0.090042Jy sigma=0.000815 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.895 mas, bmaj=10.49 mas, bpa=16.61 degrees ! Estimated noise=821.445 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00690445 Jy ! Component: 100 - total flux cleaned = 0.0105237 Jy ! Component: 150 - total flux cleaned = 0.0126652 Jy ! Component: 200 - total flux cleaned = 0.014028 Jy ! Total flux subtracted in 200 components = 0.014028 Jy ! Clean residual min=-0.003585 max=0.002871 Jy/beam ! Clean residual mean=0.000006 rms=0.000772 Jy/beam ! Combined flux in latest and established models = 0.0953154 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 42 components and 0.0953154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089405Jy sigma=0.000809 ! Fit after self-cal, rms=0.089375Jy sigma=0.000809 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.89 HN 1.05 KP 1.05 ! LA 1.10 MK 1.00* NL 1.00 OV 0.99 ! PT 1.02 SC 0.95 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.07 HN 1.05 KP 1.01 ! LA 1.11 MK 1.00* NL 1.01 OV 1.05 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.17 HN 1.06 KP 0.87 ! LA 0.85 MK 1.00* NL 1.02 OV 0.96 ! PT 0.98 SC 1.11 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 0.99 KP 0.89 ! LA 0.78 MK 1.00* NL 1.04 OV 0.95 ! PT 1.08 SC 1.02 ! ! ! Fit before self-cal, rms=0.089375Jy sigma=0.000809 ! Fit after self-cal, rms=0.085049Jy sigma=0.000803 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.909 mas, bmaj=10.55 mas, bpa=16.62 degrees ! Estimated noise=825.454 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000234633 Jy ! Component: 100 - total flux cleaned = -6.73783e-05 Jy ! Component: 150 - total flux cleaned = 9.86402e-06 Jy ! Component: 200 - total flux cleaned = -5.67205e-06 Jy ! Total flux subtracted in 200 components = -5.67205e-06 Jy ! Clean residual min=-0.003136 max=0.002866 Jy/beam ! Clean residual mean=0.000002 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.0953097 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 54 components and 0.0953097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085033Jy sigma=0.000803 ! Fit after self-cal, rms=0.085036Jy sigma=0.000803 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085036Jy sigma=0.000803 ! Fit after self-cal, rms=0.082046Jy sigma=0.000801 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.914 mas, bmaj=10.56 mas, bpa=16.58 degrees ! Estimated noise=826.281 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000196909 Jy ! Component: 100 - total flux cleaned = -8.45729e-05 Jy ! Component: 150 - total flux cleaned = -6.82245e-06 Jy ! Component: 200 - total flux cleaned = 4.75814e-05 Jy ! Total flux subtracted in 200 components = 4.75814e-05 Jy ! Clean residual min=-0.002866 max=0.002474 Jy/beam ! Clean residual mean=0.000000 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.0953573 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 60 components and 0.0953573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082037Jy sigma=0.000801 ! Fit after self-cal, rms=0.081997Jy sigma=0.000800 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000179875 Jy ! Component: 100 - total flux cleaned = 0.00024859 Jy ! Component: 150 - total flux cleaned = 0.000304289 Jy ! Component: 200 - total flux cleaned = 0.000304442 Jy ! Total flux subtracted in 200 components = 0.000304442 Jy ! Clean residual min=-0.002657 max=0.002432 Jy/beam ! Clean residual mean=0.000000 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.0956617 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 69 components and 0.0956617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081989Jy sigma=0.000800 ! Fit after self-cal, rms=0.081989Jy sigma=0.000800 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081989Jy sigma=0.000800 ! Fit after self-cal, rms=0.081709Jy sigma=0.000800 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.919 mas, bmaj=10.57 mas, bpa=16.58 degrees ! Estimated noise=827.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.98004e-05 Jy ! Component: 100 - total flux cleaned = -6.99068e-05 Jy ! Component: 150 - total flux cleaned = -4.49883e-05 Jy ! Component: 200 - total flux cleaned = -1.15491e-05 Jy ! Total flux subtracted in 200 components = -1.15491e-05 Jy ! Clean residual min=-0.002658 max=0.002491 Jy/beam ! Clean residual mean=0.000000 rms=0.000640 Jy/beam ! Combined flux in latest and established models = 0.0956502 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 71 components and 0.0956502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081702Jy sigma=0.000800 ! Fit after self-cal, rms=0.081713Jy sigma=0.000800 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.99973e-05 Jy ! Component: 100 - total flux cleaned = 5.25533e-05 Jy ! Component: 150 - total flux cleaned = 5.27205e-05 Jy ! Component: 200 - total flux cleaned = 5.28261e-05 Jy ! Total flux subtracted in 200 components = 5.28261e-05 Jy ! Clean residual min=-0.002639 max=0.002461 Jy/beam ! Clean residual mean=-0.000000 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.095703 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 74 components and 0.095703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081709Jy sigma=0.000800 ! Fit after self-cal, rms=0.081709Jy sigma=0.000800 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081709Jy sigma=0.000800 ! Fit after self-cal, rms=0.081881Jy sigma=0.000800 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.606 mas, bmaj=13.16 mas, bpa=6.23 degrees ! Estimated noise=953.468 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.05973e-05 Jy ! Component: 100 - total flux cleaned = -7.59782e-05 Jy ! Component: 150 - total flux cleaned = -0.000122777 Jy ! Component: 200 - total flux cleaned = -0.000139285 Jy ! Total flux subtracted in 200 components = -0.000139285 Jy ! Clean residual min=-0.002359 max=0.002364 Jy/beam ! Clean residual mean=-0.000000 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.0955637 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 80 components and 0.0955637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081882Jy sigma=0.000800 ! Fit after self-cal, rms=0.081888Jy sigma=0.000800 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.61844e-05 Jy ! Component: 100 - total flux cleaned = -8.48507e-06 Jy ! Component: 150 - total flux cleaned = -1.57892e-05 Jy ! Component: 200 - total flux cleaned = -2.19997e-05 Jy ! Total flux subtracted in 200 components = -2.19997e-05 Jy ! Clean residual min=-0.002342 max=0.002376 Jy/beam ! Clean residual mean=-0.000000 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.0955417 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 85 components and 0.0955417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081888Jy sigma=0.000800 ! Fit after self-cal, rms=0.081889Jy sigma=0.000800 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.922 mas, bmaj=10.58 mas, bpa=16.59 degrees ! Estimated noise=828.734 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.922 x 10.58 at 16.59 degrees (North through East) ! Clean map min=-0.0025868 max=0.087106 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.275 mas, bmaj=9.733 mas, bpa=17.17 degrees ! Estimated noise=1012.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.067315 Jy ! Component: 100 - total flux cleaned = 0.0824586 Jy ! Component: 150 - total flux cleaned = 0.0883134 Jy ! Component: 200 - total flux cleaned = 0.0913268 Jy ! Total flux subtracted in 200 components = 0.0913268 Jy ! Clean residual min=-0.003285 max=0.003084 Jy/beam ! Clean residual mean=0.000002 rms=0.000868 Jy/beam ! Combined flux in latest and established models = 0.0913268 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.0913268 Jy ! Inverting map and beam ! Estimated beam: bmin=3.922 mas, bmaj=10.58 mas, bpa=16.59 degrees ! Estimated noise=828.734 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00226553 Jy ! Component: 100 - total flux cleaned = 0.00283085 Jy ! Component: 150 - total flux cleaned = 0.00322402 Jy ! Component: 200 - total flux cleaned = 0.00353552 Jy ! Total flux subtracted in 200 components = 0.00353552 Jy ! Clean residual min=-0.002751 max=0.002487 Jy/beam ! Clean residual mean=0.000000 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.0948623 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 60 components and 0.0948623 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.606 mas, bmaj=13.16 mas, bpa=6.23 degrees ! Estimated noise=953.468 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000668634 Jy ! Component: 100 - total flux cleaned = 0.000729147 Jy ! Component: 150 - total flux cleaned = 0.000758293 Jy ! Component: 200 - total flux cleaned = 0.000745703 Jy ! Total flux subtracted in 200 components = 0.000745703 Jy ! Clean residual min=-0.002339 max=0.002391 Jy/beam ! Clean residual mean=-0.000000 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.095608 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.20622e-07 Jy ! Component: 100 - total flux cleaned = -9.94107e-06 Jy ! Component: 150 - total flux cleaned = -2.79762e-05 Jy ! Component: 200 - total flux cleaned = -3.64758e-05 Jy ! Total flux subtracted in 200 components = -3.64758e-05 Jy ! Clean residual min=-0.002333 max=0.002389 Jy/beam ! Clean residual mean=-0.000000 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.0955716 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 76 components and 0.0955715 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.922 mas, bmaj=10.58 mas, bpa=16.59 degrees ! Estimated noise=828.734 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000195499 Jy ! Component: 100 - total flux cleaned = 0.000157873 Jy ! Component: 150 - total flux cleaned = 0.000191834 Jy ! Component: 200 - total flux cleaned = 0.000208599 Jy ! Total flux subtracted in 200 components = 0.000208599 Jy ! Clean residual min=-0.002692 max=0.002490 Jy/beam ! Clean residual mean=-0.000000 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.0957801 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 90 components and 0.0957801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081905Jy sigma=0.000800 ! Fit after self-cal, rms=0.081897Jy sigma=0.000800 wmodel J1951-0509_S_2014_08_09_pus_map.mod ! Writing 90 model components to file: J1951-0509_S_2014_08_09_pus_map.mod wobs J1951-0509_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J1951-0509_S_2014_08_09_pus_uvs.fits wwins J1951-0509_S_2014_08_09_pus_map.win ! wwins: Wrote 1 windows to J1951-0509_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000308458 Jy ! Component: 100 - total flux cleaned = -0.000222884 Jy ! Component: 150 - total flux cleaned = -6.22635e-05 Jy ! Component: 200 - total flux cleaned = 0.00013157 Jy ! Component: 250 - total flux cleaned = 0.000318366 Jy ! Component: 300 - total flux cleaned = 0.000389841 Jy ! Component: 350 - total flux cleaned = 0.000319736 Jy ! Component: 400 - total flux cleaned = 0.000555524 Jy ! Component: 450 - total flux cleaned = 0.000654005 Jy ! Component: 500 - total flux cleaned = 0.000814486 Jy ! Component: 550 - total flux cleaned = 0.000971544 Jy ! Component: 600 - total flux cleaned = 0.00106375 Jy ! Component: 650 - total flux cleaned = 0.00109387 Jy ! Component: 700 - total flux cleaned = 0.00112304 Jy ! Component: 750 - total flux cleaned = 0.00106641 Jy ! Component: 800 - total flux cleaned = 0.00109499 Jy ! Component: 850 - total flux cleaned = 0.00106677 Jy ! Component: 900 - total flux cleaned = 0.000985434 Jy ! Component: 950 - total flux cleaned = 0.00111839 Jy ! Component: 1000 - total flux cleaned = 0.000960951 Jy ! Component: 1050 - total flux cleaned = 0.00111526 Jy ! Component: 1100 - total flux cleaned = 0.00114012 Jy ! Component: 1150 - total flux cleaned = 0.00106481 Jy ! Component: 1200 - total flux cleaned = 0.00103995 Jy ! Component: 1250 - total flux cleaned = 0.000991489 Jy ! Component: 1300 - total flux cleaned = 0.000896498 Jy ! Component: 1350 - total flux cleaned = 0.000896678 Jy ! Component: 1400 - total flux cleaned = 0.000803702 Jy ! Component: 1450 - total flux cleaned = 0.000780672 Jy ! Component: 1500 - total flux cleaned = 0.000735702 Jy ! Component: 1550 - total flux cleaned = 0.000757785 Jy ! Component: 1600 - total flux cleaned = 0.000669453 Jy ! Component: 1650 - total flux cleaned = 0.000648069 Jy ! Component: 1700 - total flux cleaned = 0.000690813 Jy ! Component: 1750 - total flux cleaned = 0.00064816 Jy ! Component: 1800 - total flux cleaned = 0.00073196 Jy ! Component: 1850 - total flux cleaned = 0.000586627 Jy ! Component: 1900 - total flux cleaned = 0.000628122 Jy ! Component: 1950 - total flux cleaned = 0.000669197 Jy ! Component: 2000 - total flux cleaned = 0.000709067 Jy ! Component: 2050 - total flux cleaned = 0.000748751 Jy ! Component: 2100 - total flux cleaned = 0.000807539 Jy ! Component: 2150 - total flux cleaned = 0.000807034 Jy ! Component: 2200 - total flux cleaned = 0.000729952 Jy ! Component: 2250 - total flux cleaned = 0.000673224 Jy ! Component: 2300 - total flux cleaned = 0.000730015 Jy ! Component: 2350 - total flux cleaned = 0.000655368 Jy ! Component: 2400 - total flux cleaned = 0.000692271 Jy ! Component: 2450 - total flux cleaned = 0.000637501 Jy ! Component: 2500 - total flux cleaned = 0.000655858 Jy ! Component: 2550 - total flux cleaned = 0.000637441 Jy ! Component: 2600 - total flux cleaned = 0.000619844 Jy ! Component: 2650 - total flux cleaned = 0.000619633 Jy ! Component: 2700 - total flux cleaned = 0.000602125 Jy ! Component: 2750 - total flux cleaned = 0.000550018 Jy ! Component: 2800 - total flux cleaned = 0.000532867 Jy ! Component: 2850 - total flux cleaned = 0.000515651 Jy ! Component: 2900 - total flux cleaned = 0.000549264 Jy ! Component: 2950 - total flux cleaned = 0.000482487 Jy ! Component: 3000 - total flux cleaned = 0.000465899 Jy ! Component: 3050 - total flux cleaned = 0.000465563 Jy ! Component: 3100 - total flux cleaned = 0.00043303 Jy ! Component: 3150 - total flux cleaned = 0.000304348 Jy ! Component: 3200 - total flux cleaned = 0.000304527 Jy ! Component: 3250 - total flux cleaned = 0.000352123 Jy ! Component: 3300 - total flux cleaned = 0.000289134 Jy ! Component: 3350 - total flux cleaned = 0.000242479 Jy ! Component: 3400 - total flux cleaned = 0.000227094 Jy ! Component: 3450 - total flux cleaned = 0.000165933 Jy ! Component: 3500 - total flux cleaned = 0.000135624 Jy ! Component: 3550 - total flux cleaned = 0.000120742 Jy ! Component: 3600 - total flux cleaned = 0.000105662 Jy ! Component: 3650 - total flux cleaned = 3.13994e-05 Jy ! Component: 3700 - total flux cleaned = 4.59965e-05 Jy ! Component: 3750 - total flux cleaned = 1.67555e-05 Jy ! Component: 3800 - total flux cleaned = 1.68336e-05 Jy ! Component: 3850 - total flux cleaned = -4.08686e-05 Jy ! Component: 3900 - total flux cleaned = -6.94112e-05 Jy ! Component: 3950 - total flux cleaned = -6.95021e-05 Jy ! Component: 4000 - total flux cleaned = -9.75853e-05 Jy ! Component: 4050 - total flux cleaned = -6.97365e-05 Jy ! Total flux subtracted in 4096 components = -5.57253e-05 Jy ! Clean residual min=-0.000850 max=0.000731 Jy/beam ! Clean residual mean=0.000001 rms=0.000265 Jy/beam ! Combined flux in latest and established models = 0.0957244 Jy keep ! Adding 270 model components to the UV plane model. ! The established model now contains 360 components and 0.0957244 Jy ![Exited script file: muppet] wmap "J1951-0509_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.922 x 10.58 at 16.59 degrees (North through East) ! Clean map min=-0.0015339 max=0.08718 Jy/beam ! Writing clean map to FITS file: J1951-0509_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0871796 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00026281 device "J1951-0509_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1951-0509_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.904376 0.904376 1.80875 3.6175 7.23501 14.47 28.94 57.8801 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.087 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.922 x 10.58 at 16.59 degrees (North through East) ! Clean map min=-0.0015339 max=0.08718 Jy/beam quit ! Quitting program ! Log file J1951-0509_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 23:13:52 2016