! Started logfile: J1948+3556_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:38:06 2016 obs J1948+3556_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J1948+3556_S_2014_08_05_pus_uva.fits ! AN table 1: 93 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.607168 visibilities/baseline/integration-bin. ! Found source: J1948+3556 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 10164 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1948+3556_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 208 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 208 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 208 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 208 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.941388Jy sigma=0.011594 ! Fit after self-cal, rms=0.926993Jy sigma=0.011430 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.569 mas, bmaj=7.166 mas, bpa=28.19 degrees ! Estimated noise=1086.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0502994 Jy ! Component: 100 - total flux cleaned = 0.0768004 Jy ! Total flux subtracted in 100 components = 0.0768004 Jy ! Clean residual min=-0.009300 max=0.015086 Jy/beam ! Clean residual mean=-0.000015 rms=0.003208 Jy/beam ! Combined flux in latest and established models = 0.0768003 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 0.0768003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086201Jy sigma=0.001002 ! Fit after self-cal, rms=0.085778Jy sigma=0.000997 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.619 mas, bmaj=7.66 mas, bpa=26.27 degrees ! Estimated noise=577.505 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0297845 Jy ! Component: 100 - total flux cleaned = 0.0480461 Jy ! Component: 150 - total flux cleaned = 0.059873 Jy ! Component: 200 - total flux cleaned = 0.0675427 Jy ! Total flux subtracted in 200 components = 0.0675427 Jy ! Clean residual min=-0.007247 max=0.012299 Jy/beam ! Clean residual mean=0.000000 rms=0.002532 Jy/beam ! Combined flux in latest and established models = 0.144343 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 92 components and 0.144343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073275Jy sigma=0.000846 ! Fit after self-cal, rms=0.072523Jy sigma=0.000837 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 0.81 KP 1.01 ! LA 0.98 MK 1.00* NL 1.45 OV 0.96 ! PT 0.94 SC 0.91 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.09 HN 0.86 KP 0.96 ! LA 0.98 MK 1.00* NL 1.46 OV 1.02 ! PT 0.91 SC 1.03 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.18 HN 0.89 KP 0.83 ! LA 0.75 MK 1.00* NL 1.44 OV 0.95 ! PT 0.93 SC 1.08 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.09 HN 0.78 KP 0.82 ! LA 0.71 MK 1.00* NL 1.42 OV 0.93 ! PT 0.91 SC 1.00 ! ! ! Fit before self-cal, rms=0.072523Jy sigma=0.000837 ! Fit after self-cal, rms=0.069599Jy sigma=0.000803 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.593 mas, bmaj=7.491 mas, bpa=24.43 degrees ! Estimated noise=554.747 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00226517 Jy ! Component: 100 - total flux cleaned = 0.0024388 Jy ! Component: 150 - total flux cleaned = 0.00243612 Jy ! Component: 200 - total flux cleaned = 0.00243646 Jy ! Total flux subtracted in 200 components = 0.00243646 Jy ! Clean residual min=-0.005468 max=0.009395 Jy/beam ! Clean residual mean=-0.000020 rms=0.001866 Jy/beam ! Combined flux in latest and established models = 0.146779 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 97 components and 0.146779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069490Jy sigma=0.000802 ! Fit after self-cal, rms=0.069715Jy sigma=0.000801 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069715Jy sigma=0.000801 ! Fit after self-cal, rms=0.069391Jy sigma=0.000792 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.619 mas, bmaj=7.401 mas, bpa=25.49 degrees ! Estimated noise=551.717 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000866199 Jy ! Component: 100 - total flux cleaned = 0.0010188 Jy ! Component: 150 - total flux cleaned = 0.0010543 Jy ! Component: 200 - total flux cleaned = 0.00108748 Jy ! Total flux subtracted in 200 components = 0.00108748 Jy ! Clean residual min=-0.004465 max=0.007752 Jy/beam ! Clean residual mean=0.000010 rms=0.001631 Jy/beam ! Combined flux in latest and established models = 0.147867 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 104 components and 0.147867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069330Jy sigma=0.000791 ! Fit after self-cal, rms=0.069362Jy sigma=0.000791 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (35, -14.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00763478 Jy ! Component: 100 - total flux cleaned = 0.0121845 Jy ! Component: 150 - total flux cleaned = 0.0151862 Jy ! Component: 200 - total flux cleaned = 0.0168234 Jy ! Total flux subtracted in 200 components = 0.0168234 Jy ! Clean residual min=-0.003721 max=0.005265 Jy/beam ! Clean residual mean=0.000009 rms=0.001246 Jy/beam ! Combined flux in latest and established models = 0.16469 Jy ! Performing phase self-cal ! Adding 72 model components to the UV plane model. ! The established model now contains 174 components and 0.16469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068500Jy sigma=0.000777 ! Fit after self-cal, rms=0.068294Jy sigma=0.000774 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068294Jy sigma=0.000774 ! Fit after self-cal, rms=0.066410Jy sigma=0.000772 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.645 mas, bmaj=7.361 mas, bpa=25.54 degrees ! Estimated noise=542.786 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00409125 Jy ! Component: 100 - total flux cleaned = 0.00652879 Jy ! Component: 150 - total flux cleaned = 0.0076589 Jy ! Component: 200 - total flux cleaned = 0.00823445 Jy ! Total flux subtracted in 200 components = 0.00823445 Jy ! Clean residual min=-0.003068 max=0.003721 Jy/beam ! Clean residual mean=-0.000000 rms=0.000949 Jy/beam ! Combined flux in latest and established models = 0.172925 Jy selfcal ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 211 components and 0.172925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066143Jy sigma=0.000768 ! Fit after self-cal, rms=0.066054Jy sigma=0.000767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156466 Jy ! Component: 100 - total flux cleaned = 0.00213847 Jy ! Component: 150 - total flux cleaned = 0.00237325 Jy ! Component: 200 - total flux cleaned = 0.00257578 Jy ! Total flux subtracted in 200 components = 0.00257578 Jy ! Clean residual min=-0.002945 max=0.003678 Jy/beam ! Clean residual mean=-0.000002 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 0.1755 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 227 components and 0.1755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065976Jy sigma=0.000766 ! Fit after self-cal, rms=0.065959Jy sigma=0.000766 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065959Jy sigma=0.000766 ! Fit after self-cal, rms=0.065301Jy sigma=0.000765 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.045 mas, bmaj=10.28 mas, bpa=88.45 degrees ! Estimated noise=625.782 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00248035 Jy ! Component: 100 - total flux cleaned = 0.00326438 Jy ! Component: 150 - total flux cleaned = 0.0037629 Jy ! Component: 200 - total flux cleaned = 0.00398111 Jy ! Total flux subtracted in 200 components = 0.00398111 Jy ! Clean residual min=-0.003429 max=0.004571 Jy/beam ! Clean residual mean=-0.000007 rms=0.001155 Jy/beam ! Combined flux in latest and established models = 0.179482 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 256 components and 0.179482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065231Jy sigma=0.000763 ! Fit after self-cal, rms=0.065218Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000520883 Jy ! Component: 100 - total flux cleaned = 0.000716497 Jy ! Component: 150 - total flux cleaned = 0.00085742 Jy ! Component: 200 - total flux cleaned = 0.000988293 Jy ! Total flux subtracted in 200 components = 0.000988293 Jy ! Clean residual min=-0.003419 max=0.004519 Jy/beam ! Clean residual mean=-0.000009 rms=0.001126 Jy/beam ! Combined flux in latest and established models = 0.18047 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 268 components and 0.18047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065199Jy sigma=0.000763 ! Fit after self-cal, rms=0.065207Jy sigma=0.000763 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.701 mas, bmaj=7.303 mas, bpa=25.3 degrees ! Estimated noise=538.338 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.701 x 7.303 at 25.3 degrees (North through East) ! Clean map min=-0.0028394 max=0.056466 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.66 mas, bmaj=6.739 mas, bpa=27.09 degrees ! Estimated noise=1004.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0469724 Jy ! Component: 100 - total flux cleaned = 0.0753768 Jy ! Component: 150 - total flux cleaned = 0.0945042 Jy ! Component: 200 - total flux cleaned = 0.107576 Jy ! Total flux subtracted in 200 components = 0.107576 Jy ! Clean residual min=-0.006576 max=0.008846 Jy/beam ! Clean residual mean=-0.000012 rms=0.001868 Jy/beam ! Combined flux in latest and established models = 0.107576 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 50 model components to the UV plane model. ! The established model now contains 50 components and 0.107576 Jy ! Inverting map and beam ! Estimated beam: bmin=4.701 mas, bmaj=7.303 mas, bpa=25.3 degrees ! Estimated noise=538.338 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153533 Jy ! Component: 100 - total flux cleaned = 0.0261735 Jy ! Component: 150 - total flux cleaned = 0.0346303 Jy ! Component: 200 - total flux cleaned = 0.041388 Jy ! Total flux subtracted in 200 components = 0.041388 Jy ! Clean residual min=-0.004513 max=0.005294 Jy/beam ! Clean residual mean=0.000002 rms=0.001348 Jy/beam ! Combined flux in latest and established models = 0.148964 Jy ! Adding 84 model components to the UV plane model. ! The established model now contains 126 components and 0.148964 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.045 mas, bmaj=10.28 mas, bpa=88.45 degrees ! Estimated noise=625.782 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00850405 Jy ! Component: 100 - total flux cleaned = 0.0144919 Jy ! Component: 150 - total flux cleaned = 0.0188773 Jy ! Component: 200 - total flux cleaned = 0.0221559 Jy ! Total flux subtracted in 200 components = 0.0221559 Jy ! Clean residual min=-0.004337 max=0.004384 Jy/beam ! Clean residual mean=-0.000001 rms=0.001266 Jy/beam ! Combined flux in latest and established models = 0.17112 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00248914 Jy ! Component: 100 - total flux cleaned = 0.00382786 Jy ! Component: 150 - total flux cleaned = 0.00479462 Jy ! Component: 200 - total flux cleaned = 0.00564673 Jy ! Total flux subtracted in 200 components = 0.00564673 Jy ! Clean residual min=-0.003779 max=0.004586 Jy/beam ! Clean residual mean=-0.000003 rms=0.001138 Jy/beam ! Combined flux in latest and established models = 0.176767 Jy ! Adding 116 model components to the UV plane model. ! The established model now contains 228 components and 0.176767 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.701 mas, bmaj=7.303 mas, bpa=25.3 degrees ! Estimated noise=538.338 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000315766 Jy ! Component: 100 - total flux cleaned = 0.000677897 Jy ! Component: 150 - total flux cleaned = 0.000861593 Jy ! Component: 200 - total flux cleaned = 0.00106577 Jy ! Total flux subtracted in 200 components = 0.00106577 Jy ! Clean residual min=-0.002983 max=0.003585 Jy/beam ! Clean residual mean=-0.000002 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.177832 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 241 components and 0.177832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065373Jy sigma=0.000765 ! Fit after self-cal, rms=0.065399Jy sigma=0.000764 wmodel J1948+3556_S_2014_08_05_pus_map.mod ! Writing 241 model components to file: J1948+3556_S_2014_08_05_pus_map.mod wobs J1948+3556_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J1948+3556_S_2014_08_05_pus_uvs.fits wwins J1948+3556_S_2014_08_05_pus_map.win ! wwins: Wrote 2 windows to J1948+3556_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000917951 Jy ! Component: 100 - total flux cleaned = 0.00122582 Jy ! Component: 150 - total flux cleaned = 0.00141259 Jy ! Component: 200 - total flux cleaned = 0.00154402 Jy ! Component: 250 - total flux cleaned = 0.00162591 Jy ! Component: 300 - total flux cleaned = 0.00166468 Jy ! Component: 350 - total flux cleaned = 0.00166525 Jy ! Component: 400 - total flux cleaned = 0.00155842 Jy ! Component: 450 - total flux cleaned = 0.00152476 Jy ! Component: 500 - total flux cleaned = 0.00159091 Jy ! Component: 550 - total flux cleaned = 0.00155859 Jy ! Component: 600 - total flux cleaned = 0.00149597 Jy ! Component: 650 - total flux cleaned = 0.00140589 Jy ! Component: 700 - total flux cleaned = 0.00129005 Jy ! Component: 750 - total flux cleaned = 0.00120659 Jy ! Component: 800 - total flux cleaned = 0.00120679 Jy ! Component: 850 - total flux cleaned = 0.00120759 Jy ! Component: 900 - total flux cleaned = 0.00133473 Jy ! Component: 950 - total flux cleaned = 0.00145967 Jy ! Component: 1000 - total flux cleaned = 0.00155655 Jy ! Component: 1050 - total flux cleaned = 0.00167538 Jy ! Component: 1100 - total flux cleaned = 0.00179112 Jy ! Component: 1150 - total flux cleaned = 0.00172347 Jy ! Component: 1200 - total flux cleaned = 0.00178967 Jy ! Component: 1250 - total flux cleaned = 0.00178995 Jy ! Component: 1300 - total flux cleaned = 0.00185355 Jy ! Component: 1350 - total flux cleaned = 0.00193549 Jy ! Component: 1400 - total flux cleaned = 0.00191478 Jy ! Component: 1450 - total flux cleaned = 0.00193489 Jy ! Component: 1500 - total flux cleaned = 0.00195416 Jy ! Component: 1550 - total flux cleaned = 0.00195385 Jy ! Component: 1600 - total flux cleaned = 0.00191724 Jy ! Component: 1650 - total flux cleaned = 0.00188103 Jy ! Component: 1700 - total flux cleaned = 0.00188112 Jy ! Component: 1750 - total flux cleaned = 0.00191583 Jy ! Component: 1800 - total flux cleaned = 0.00200009 Jy ! Component: 1850 - total flux cleaned = 0.00201664 Jy ! Component: 1900 - total flux cleaned = 0.00201648 Jy ! Component: 1950 - total flux cleaned = 0.00206456 Jy ! Component: 2000 - total flux cleaned = 0.00208017 Jy ! Component: 2050 - total flux cleaned = 0.00214175 Jy ! Component: 2100 - total flux cleaned = 0.00212636 Jy ! Component: 2150 - total flux cleaned = 0.00217091 Jy ! Component: 2200 - total flux cleaned = 0.0021418 Jy ! Component: 2250 - total flux cleaned = 0.00218553 Jy ! Component: 2300 - total flux cleaned = 0.00220007 Jy ! Component: 2350 - total flux cleaned = 0.00225603 Jy ! Component: 2400 - total flux cleaned = 0.00225581 Jy ! Component: 2450 - total flux cleaned = 0.00228308 Jy ! Component: 2500 - total flux cleaned = 0.00226991 Jy ! Component: 2550 - total flux cleaned = 0.00227022 Jy ! Component: 2600 - total flux cleaned = 0.00227037 Jy ! Component: 2650 - total flux cleaned = 0.00223185 Jy ! Component: 2700 - total flux cleaned = 0.00223199 Jy ! Component: 2750 - total flux cleaned = 0.0022199 Jy ! Component: 2800 - total flux cleaned = 0.00220776 Jy ! Component: 2850 - total flux cleaned = 0.00219568 Jy ! Component: 2900 - total flux cleaned = 0.00214823 Jy ! Component: 2950 - total flux cleaned = 0.00215983 Jy ! Component: 3000 - total flux cleaned = 0.00218282 Jy ! Component: 3050 - total flux cleaned = 0.00212615 Jy ! Component: 3100 - total flux cleaned = 0.00213737 Jy ! Component: 3150 - total flux cleaned = 0.00213727 Jy ! Component: 3200 - total flux cleaned = 0.00212628 Jy ! Component: 3250 - total flux cleaned = 0.00208325 Jy ! Component: 3300 - total flux cleaned = 0.00213649 Jy ! Component: 3350 - total flux cleaned = 0.002063 Jy ! Component: 3400 - total flux cleaned = 0.00206319 Jy ! Component: 3450 - total flux cleaned = 0.00206315 Jy ! Component: 3500 - total flux cleaned = 0.00208346 Jy ! Component: 3550 - total flux cleaned = 0.00207339 Jy ! Component: 3600 - total flux cleaned = 0.00205362 Jy ! Component: 3650 - total flux cleaned = 0.00207309 Jy ! Component: 3700 - total flux cleaned = 0.00209241 Jy ! Component: 3750 - total flux cleaned = 0.00206355 Jy ! Component: 3800 - total flux cleaned = 0.0020447 Jy ! Component: 3850 - total flux cleaned = 0.00205407 Jy ! Component: 3900 - total flux cleaned = 0.00204476 Jy ! Component: 3950 - total flux cleaned = 0.00205395 Jy ! Component: 4000 - total flux cleaned = 0.00205371 Jy ! Component: 4050 - total flux cleaned = 0.00201768 Jy ! Total flux subtracted in 4096 components = 0.00204432 Jy ! Clean residual min=-0.000504 max=0.000569 Jy/beam ! Clean residual mean=0.000001 rms=0.000172 Jy/beam ! Combined flux in latest and established models = 0.179877 Jy keep ! Adding 327 model components to the UV plane model. ! The established model now contains 568 components and 0.179877 Jy ![Exited script file: muppet] wmap "J1948+3556_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.701 x 7.303 at 25.3 degrees (North through East) ! Clean map min=-0.0013569 max=0.055553 Jy/beam ! Writing clean map to FITS file: J1948+3556_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0555526 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000166122 device "J1948+3556_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J1948+3556_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.897105 0.897105 1.79421 3.58842 7.17684 14.3537 28.7074 57.4147 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.055 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.701 x 7.303 at 25.3 degrees (North through East) ! Clean map min=-0.0013569 max=0.055553 Jy/beam quit ! Quitting program ! Log file J1948+3556_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:38:10 2016