! Started logfile: J1947-0103_S_2014_08_09_pus_uvs.log on Tue Nov 29 23:13:36 2016
obs J1947-0103_S_2014_08_09_pus_uva.fits
! Reading UV FITS file: J1947-0103_S_2014_08_09_pus_uva.fits
! AN table 1: 82 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.693767 visibilities/baseline/integration-bin.
! Found source: J1947-0103
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 342 lines of history.
! 
! Reading 10240 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J1947-0103_S_2014_08_09_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 136 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 136 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 136 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 136 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.846640Jy  sigma=0.009495
! Fit after  self-cal, rms=0.828773Jy  sigma=0.009297
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.28 mas, bmaj=9.335 mas, bpa=16.93 degrees
! Estimated noise=816.785 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.133858 Jy
! Component: 100  -  total flux cleaned = 0.163062 Jy
! Total flux subtracted in 100 components = 0.163062 Jy
! Clean residual min=-0.005683 max=0.008418 Jy/beam
! Clean residual mean=0.000006 rms=0.001483 Jy/beam
! Combined flux in latest and established models = 0.163062 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.163062 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078199Jy  sigma=0.000816
! Fit after  self-cal, rms=0.078197Jy  sigma=0.000816
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.903 mas, bmaj=9.969 mas, bpa=16.01 degrees
! Estimated noise=633.295 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00994335 Jy
! Component: 100  -  total flux cleaned = 0.0147863 Jy
! Component: 150  -  total flux cleaned = 0.0177475 Jy
! Component: 200  -  total flux cleaned = 0.0197116 Jy
! Total flux subtracted in 200 components = 0.0197116 Jy
! Clean residual min=-0.003578 max=0.003675 Jy/beam
! Clean residual mean=0.000008 rms=0.000891 Jy/beam
! Combined flux in latest and established models = 0.182774 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 46 components and 0.182774 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076716Jy  sigma=0.000804
! Fit after  self-cal, rms=0.076728Jy  sigma=0.000804
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.90     HN        0.97     KP        1.09     
!   LA        1.10     MK        1.00*    NL        0.98     OV        0.99     
!   PT        1.03     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.10     HN        1.04     KP        1.02     
!   LA        1.07     MK        1.00*    NL        0.96     OV        1.01     
!   PT        1.01     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.19     HN        1.04     KP        0.89     
!   LA        0.84     MK        1.00*    NL        1.01     OV        0.95     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.04     HN        1.00     KP        0.89     
!   LA        0.80     MK        1.00*    NL        1.10     OV        1.00     
!   PT        0.98     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.076728Jy  sigma=0.000804
! Fit after  self-cal, rms=0.072403Jy  sigma=0.000777
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.905 mas, bmaj=10.01 mas, bpa=16 degrees
! Estimated noise=631.164 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000464973 Jy
! Component: 100  -  total flux cleaned = 0.000585422 Jy
! Component: 150  -  total flux cleaned = 0.000623086 Jy
! Component: 200  -  total flux cleaned = 0.00063373 Jy
! Total flux subtracted in 200 components = 0.00063373 Jy
! Clean residual min=-0.002286 max=0.002120 Jy/beam
! Clean residual mean=0.000001 rms=0.000549 Jy/beam
! Combined flux in latest and established models = 0.183408 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 57 components and 0.183408 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072397Jy  sigma=0.000777
! Fit after  self-cal, rms=0.072397Jy  sigma=0.000776
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072397Jy  sigma=0.000776
! Fit after  self-cal, rms=0.072113Jy  sigma=0.000774
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.904 mas, bmaj=10.01 mas, bpa=16.04 degrees
! Estimated noise=631.318 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000251819 Jy
! Component: 100  -  total flux cleaned = 0.000271646 Jy
! Component: 150  -  total flux cleaned = 0.000280362 Jy
! Component: 200  -  total flux cleaned = 0.000288744 Jy
! Total flux subtracted in 200 components = 0.000288744 Jy
! Clean residual min=-0.001801 max=0.001734 Jy/beam
! Clean residual mean=-0.000001 rms=0.000439 Jy/beam
! Combined flux in latest and established models = 0.183696 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 64 components and 0.183696 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072111Jy  sigma=0.000774
! Fit after  self-cal, rms=0.072111Jy  sigma=0.000774
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.79045e-06 Jy
! Component: 100  -  total flux cleaned = 8.73292e-06 Jy
! Component: 150  -  total flux cleaned = 2.24606e-05 Jy
! Component: 200  -  total flux cleaned = 2.88854e-05 Jy
! Total flux subtracted in 200 components = 2.88854e-05 Jy
! Clean residual min=-0.001783 max=0.001742 Jy/beam
! Clean residual mean=-0.000001 rms=0.000438 Jy/beam
! Combined flux in latest and established models = 0.183725 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 67 components and 0.183725 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072110Jy  sigma=0.000774
! Fit after  self-cal, rms=0.072110Jy  sigma=0.000774
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072110Jy  sigma=0.000774
! Fit after  self-cal, rms=0.072130Jy  sigma=0.000774
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.903 mas, bmaj=10.01 mas, bpa=16.05 degrees
! Estimated noise=631.402 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000243657 Jy
! Component: 100  -  total flux cleaned = 0.000250618 Jy
! Component: 150  -  total flux cleaned = 0.00025721 Jy
! Component: 200  -  total flux cleaned = 0.00026314 Jy
! Total flux subtracted in 200 components = 0.00026314 Jy
! Clean residual min=-0.001756 max=0.001737 Jy/beam
! Clean residual mean=-0.000001 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.183988 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 69 components and 0.183988 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072129Jy  sigma=0.000774
! Fit after  self-cal, rms=0.072129Jy  sigma=0.000774
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.88305e-06 Jy
! Component: 100  -  total flux cleaned = 1.11817e-05 Jy
! Component: 150  -  total flux cleaned = 2.15471e-05 Jy
! Component: 200  -  total flux cleaned = 3.13994e-05 Jy
! Total flux subtracted in 200 components = 3.13994e-05 Jy
! Clean residual min=-0.001748 max=0.001732 Jy/beam
! Clean residual mean=-0.000001 rms=0.000435 Jy/beam
! Combined flux in latest and established models = 0.18402 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 70 components and 0.18402 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072128Jy  sigma=0.000774
! Fit after  self-cal, rms=0.072128Jy  sigma=0.000774
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072128Jy  sigma=0.000774
! Fit after  self-cal, rms=0.072139Jy  sigma=0.000774
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.49 mas, bmaj=12.36 mas, bpa=5.316 degrees
! Estimated noise=735.912 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000136613 Jy
! Component: 100  -  total flux cleaned = 0.000224851 Jy
! Component: 150  -  total flux cleaned = 0.000288299 Jy
! Component: 200  -  total flux cleaned = 0.000299511 Jy
! Total flux subtracted in 200 components = 0.000299511 Jy
! Clean residual min=-0.001963 max=0.001858 Jy/beam
! Clean residual mean=-0.000001 rms=0.000518 Jy/beam
! Combined flux in latest and established models = 0.184319 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 74 components and 0.184319 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072139Jy  sigma=0.000774
! Fit after  self-cal, rms=0.072139Jy  sigma=0.000774
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.72887e-06 Jy
! Component: 100  -  total flux cleaned = 3.24334e-05 Jy
! Component: 150  -  total flux cleaned = 4.10591e-05 Jy
! Component: 200  -  total flux cleaned = 4.48624e-05 Jy
! Total flux subtracted in 200 components = 4.48624e-05 Jy
! Clean residual min=-0.001940 max=0.001845 Jy/beam
! Clean residual mean=-0.000002 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.184364 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 78 components and 0.184364 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072139Jy  sigma=0.000774
! Fit after  self-cal, rms=0.072139Jy  sigma=0.000774
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.902 mas, bmaj=10.01 mas, bpa=16.06 degrees
! Estimated noise=631.488 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.902 x 10.01 at 16.06 degrees (North through East)
! Clean map  min=-0.0016484  max=0.1717 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.266 mas, bmaj=9.372 mas, bpa=16.92 degrees
! Estimated noise=814.283 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.133414 Jy
! Component: 100  -  total flux cleaned = 0.162571 Jy
! Component: 150  -  total flux cleaned = 0.17094 Jy
! Component: 200  -  total flux cleaned = 0.175042 Jy
! Total flux subtracted in 200 components = 0.175042 Jy
! Clean residual min=-0.002617 max=0.002345 Jy/beam
! Clean residual mean=-0.000000 rms=0.000631 Jy/beam
! Combined flux in latest and established models = 0.175041 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.175041 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.902 mas, bmaj=10.01 mas, bpa=16.06 degrees
! Estimated noise=631.488 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00326127 Jy
! Component: 100  -  total flux cleaned = 0.00524167 Jy
! Component: 150  -  total flux cleaned = 0.00652849 Jy
! Component: 200  -  total flux cleaned = 0.00738928 Jy
! Total flux subtracted in 200 components = 0.00738928 Jy
! Clean residual min=-0.001879 max=0.001702 Jy/beam
! Clean residual mean=0.000000 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.182431 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 51 components and 0.182431 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.49 mas, bmaj=12.36 mas, bpa=5.316 degrees
! Estimated noise=735.912 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000925917 Jy
! Component: 100  -  total flux cleaned = 0.00144043 Jy
! Component: 150  -  total flux cleaned = 0.00158992 Jy
! Component: 200  -  total flux cleaned = 0.00165288 Jy
! Total flux subtracted in 200 components = 0.00165288 Jy
! Clean residual min=-0.001993 max=0.001836 Jy/beam
! Clean residual mean=-0.000001 rms=0.000522 Jy/beam
! Combined flux in latest and established models = 0.184084 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.36879e-05 Jy
! Component: 100  -  total flux cleaned = 8.09274e-05 Jy
! Component: 150  -  total flux cleaned = 0.000106789 Jy
! Component: 200  -  total flux cleaned = 0.000124012 Jy
! Total flux subtracted in 200 components = 0.000124012 Jy
! Clean residual min=-0.001960 max=0.001843 Jy/beam
! Clean residual mean=-0.000001 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.184208 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 80 components and 0.184208 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.902 mas, bmaj=10.01 mas, bpa=16.06 degrees
! Estimated noise=631.488 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000112222 Jy
! Component: 100  -  total flux cleaned = 9.21585e-05 Jy
! Component: 150  -  total flux cleaned = 0.000100772 Jy
! Component: 200  -  total flux cleaned = 0.000100506 Jy
! Total flux subtracted in 200 components = 0.000100506 Jy
! Clean residual min=-0.001699 max=0.001760 Jy/beam
! Clean residual mean=-0.000001 rms=0.000435 Jy/beam
! Combined flux in latest and established models = 0.184308 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 89 components and 0.184308 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072141Jy  sigma=0.000774
! Fit after  self-cal, rms=0.072141Jy  sigma=0.000774
wmodel J1947-0103_S_2014_08_09_pus_map.mod
! Writing 89 model components to file: J1947-0103_S_2014_08_09_pus_map.mod
wobs J1947-0103_S_2014_08_09_pus_uvs.fits
! Writing UV FITS file: J1947-0103_S_2014_08_09_pus_uvs.fits
wwins J1947-0103_S_2014_08_09_pus_map.win
! wwins: Wrote 1 windows to J1947-0103_S_2014_08_09_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000127612 Jy
! Component: 100  -  total flux cleaned = 0.000299171 Jy
! Component: 150  -  total flux cleaned = 0.000595674 Jy
! Component: 200  -  total flux cleaned = 0.000723968 Jy
! Component: 250  -  total flux cleaned = 0.000847558 Jy
! Component: 300  -  total flux cleaned = 0.000943267 Jy
! Component: 350  -  total flux cleaned = 0.0010835 Jy
! Component: 400  -  total flux cleaned = 0.00121964 Jy
! Component: 450  -  total flux cleaned = 0.00139534 Jy
! Component: 500  -  total flux cleaned = 0.00152346 Jy
! Component: 550  -  total flux cleaned = 0.00162756 Jy
! Component: 600  -  total flux cleaned = 0.00172914 Jy
! Component: 650  -  total flux cleaned = 0.00180831 Jy
! Component: 700  -  total flux cleaned = 0.00190562 Jy
! Component: 750  -  total flux cleaned = 0.0020014 Jy
! Component: 800  -  total flux cleaned = 0.00211372 Jy
! Component: 850  -  total flux cleaned = 0.00222327 Jy
! Component: 900  -  total flux cleaned = 0.00232996 Jy
! Component: 950  -  total flux cleaned = 0.00238234 Jy
! Component: 1000  -  total flux cleaned = 0.0025027 Jy
! Component: 1050  -  total flux cleaned = 0.00258675 Jy
! Component: 1100  -  total flux cleaned = 0.00270249 Jy
! Component: 1150  -  total flux cleaned = 0.00276751 Jy
! Component: 1200  -  total flux cleaned = 0.00291145 Jy
! Component: 1250  -  total flux cleaned = 0.003068 Jy
! Component: 1300  -  total flux cleaned = 0.00312941 Jy
! Component: 1350  -  total flux cleaned = 0.00325076 Jy
! Component: 1400  -  total flux cleaned = 0.00335501 Jy
! Component: 1450  -  total flux cleaned = 0.00342835 Jy
! Component: 1500  -  total flux cleaned = 0.00350075 Jy
! Component: 1550  -  total flux cleaned = 0.00362846 Jy
! Component: 1600  -  total flux cleaned = 0.0037678 Jy
! Component: 1650  -  total flux cleaned = 0.00380856 Jy
! Component: 1700  -  total flux cleaned = 0.003795 Jy
! Component: 1750  -  total flux cleaned = 0.00388874 Jy
! Component: 1800  -  total flux cleaned = 0.0039543 Jy
! Component: 1850  -  total flux cleaned = 0.00404524 Jy
! Component: 1900  -  total flux cleaned = 0.00405781 Jy
! Component: 1950  -  total flux cleaned = 0.00410845 Jy
! Component: 2000  -  total flux cleaned = 0.00415856 Jy
! Component: 2050  -  total flux cleaned = 0.00419559 Jy
! Component: 2100  -  total flux cleaned = 0.00425696 Jy
! Component: 2150  -  total flux cleaned = 0.00432935 Jy
! Component: 2200  -  total flux cleaned = 0.00437697 Jy
! Component: 2250  -  total flux cleaned = 0.00440034 Jy
! Component: 2300  -  total flux cleaned = 0.00444699 Jy
! Component: 2350  -  total flux cleaned = 0.00452741 Jy
! Component: 2400  -  total flux cleaned = 0.0045729 Jy
! Component: 2450  -  total flux cleaned = 0.0046513 Jy
! Component: 2500  -  total flux cleaned = 0.00465134 Jy
! Component: 2550  -  total flux cleaned = 0.00468442 Jy
! Component: 2600  -  total flux cleaned = 0.00474961 Jy
! Component: 2650  -  total flux cleaned = 0.00479251 Jy
! Component: 2700  -  total flux cleaned = 0.00481358 Jy
! Component: 2750  -  total flux cleaned = 0.00484528 Jy
! Component: 2800  -  total flux cleaned = 0.0048454 Jy
! Component: 2850  -  total flux cleaned = 0.00483515 Jy
! Component: 2900  -  total flux cleaned = 0.00489665 Jy
! Component: 2950  -  total flux cleaned = 0.00488653 Jy
! Component: 3000  -  total flux cleaned = 0.00495665 Jy
! Component: 3050  -  total flux cleaned = 0.00496639 Jy
! Component: 3100  -  total flux cleaned = 0.00497632 Jy
! Component: 3150  -  total flux cleaned = 0.00503494 Jy
! Component: 3200  -  total flux cleaned = 0.00500598 Jy
! Component: 3250  -  total flux cleaned = 0.0050635 Jy
! Component: 3300  -  total flux cleaned = 0.00508266 Jy
! Component: 3350  -  total flux cleaned = 0.00510148 Jy
! Component: 3400  -  total flux cleaned = 0.00512961 Jy
! Component: 3450  -  total flux cleaned = 0.00513887 Jy
! Component: 3500  -  total flux cleaned = 0.00516654 Jy
! Component: 3550  -  total flux cleaned = 0.00520301 Jy
! Component: 3600  -  total flux cleaned = 0.00522115 Jy
! Component: 3650  -  total flux cleaned = 0.00523904 Jy
! Component: 3700  -  total flux cleaned = 0.00526582 Jy
! Component: 3750  -  total flux cleaned = 0.00526584 Jy
! Component: 3800  -  total flux cleaned = 0.00524841 Jy
! Component: 3850  -  total flux cleaned = 0.00524838 Jy
! Component: 3900  -  total flux cleaned = 0.00525702 Jy
! Component: 3950  -  total flux cleaned = 0.00523992 Jy
! Component: 4000  -  total flux cleaned = 0.00529913 Jy
! Component: 4050  -  total flux cleaned = 0.00526543 Jy
! Total flux subtracted in 4096 components = 0.00524051 Jy
! Clean residual min=-0.000451 max=0.000519 Jy/beam
! Clean residual mean=0.000000 rms=0.000161 Jy/beam
! Combined flux in latest and established models = 0.189549 Jy
keep
! Adding 287 model components to the UV plane model.
! The established model now contains 376 components and 0.189549 Jy
![Exited script file: muppet]
wmap "J1947-0103_S_2014_08_09_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.902 x 10.01 at 16.06 degrees (North through East)
! Clean map  min=-0.00098796  max=0.17175 Jy/beam
! Writing clean map to FITS file: J1947-0103_S_2014_08_09_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.171747 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000160877 
device "J1947-0103_S_2014_08_09_pus\_map.eps/VPS"
! Attempting to open device: 'J1947-0103_S_2014_08_09_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.281012 0.281012 0.562025 1.12405 2.2481 4.4962 8.99239 17.9848 35.9696 71.9391
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0004 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.171 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.902 x 10.01 at 16.06 degrees (North through East)
! Clean map  min=-0.00098796  max=0.17175 Jy/beam
quit
! Quitting program
! Log file J1947-0103_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 23:13:41 2016