! Started logfile: J1942-3130_S_2014_08_09_pus_uvs.log on Tue Nov 29 23:13:26 2016 obs J1942-3130_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J1942-3130_S_2014_08_09_pus_uva.fits ! AN table 1: 82 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.772358 visibilities/baseline/integration-bin. ! Found source: J1942-3130 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 11400 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1942-3130_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 98 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 98 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 98 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 98 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.929648Jy sigma=0.007342 ! Fit after self-cal, rms=0.902639Jy sigma=0.007152 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.059 mas, bmaj=13.4 mas, bpa=11.75 degrees ! Estimated noise=1450.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0768536 Jy ! Component: 100 - total flux cleaned = 0.0943004 Jy ! Total flux subtracted in 100 components = 0.0943004 Jy ! Clean residual min=-0.006143 max=0.007170 Jy/beam ! Clean residual mean=0.000013 rms=0.001641 Jy/beam ! Combined flux in latest and established models = 0.0943004 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0943004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109042Jy sigma=0.000789 ! Fit after self-cal, rms=0.109018Jy sigma=0.000789 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.922 mas, bmaj=15.24 mas, bpa=10.45 degrees ! Estimated noise=851.792 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013254 Jy ! Component: 100 - total flux cleaned = 0.0203551 Jy ! Component: 150 - total flux cleaned = 0.0245387 Jy ! Component: 200 - total flux cleaned = 0.0270564 Jy ! Total flux subtracted in 200 components = 0.0270564 Jy ! Clean residual min=-0.003379 max=0.005077 Jy/beam ! Clean residual mean=0.000012 rms=0.000998 Jy/beam ! Combined flux in latest and established models = 0.121357 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 59 components and 0.121357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107437Jy sigma=0.000775 ! Fit after self-cal, rms=0.107436Jy sigma=0.000775 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.85 HN 1.05 KP 1.10 ! LA 1.15 MK 1.00* NL 1.00 OV 0.99 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.98 HN 1.14 KP 1.04 ! LA 1.06 MK 1.00* NL 1.07 OV 1.02 ! PT 0.99 SC 1.09 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.12 HN 1.11 KP 0.91 ! LA 0.89 MK 1.00* NL 1.02 OV 0.92 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.98 HN 1.07 KP 0.84 ! LA 0.82 MK 1.00* NL 1.02 OV 1.02 ! PT 1.03 SC 0.94 ! ! ! Fit before self-cal, rms=0.107436Jy sigma=0.000775 ! Fit after self-cal, rms=0.106369Jy sigma=0.000768 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.935 mas, bmaj=15.46 mas, bpa=10.75 degrees ! Estimated noise=846.813 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14.5, 27.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00447945 Jy ! Component: 100 - total flux cleaned = 0.00570291 Jy ! Component: 150 - total flux cleaned = 0.00664637 Jy ! Component: 200 - total flux cleaned = 0.00721759 Jy ! Total flux subtracted in 200 components = 0.00721759 Jy ! Clean residual min=-0.002751 max=0.003024 Jy/beam ! Clean residual mean=0.000005 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.128574 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 86 components and 0.128574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106176Jy sigma=0.000766 ! Fit after self-cal, rms=0.106177Jy sigma=0.000766 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106177Jy sigma=0.000766 ! Fit after self-cal, rms=0.106683Jy sigma=0.000765 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.937 mas, bmaj=15.45 mas, bpa=10.62 degrees ! Estimated noise=844.131 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015216 Jy ! Component: 100 - total flux cleaned = 0.00191322 Jy ! Component: 150 - total flux cleaned = 0.00207528 Jy ! Component: 200 - total flux cleaned = 0.00218147 Jy ! Total flux subtracted in 200 components = 0.00218147 Jy ! Clean residual min=-0.002573 max=0.002594 Jy/beam ! Clean residual mean=0.000006 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.130756 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 101 components and 0.130756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106644Jy sigma=0.000764 ! Fit after self-cal, rms=0.106675Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000271217 Jy ! Component: 100 - total flux cleaned = 0.000367175 Jy ! Component: 150 - total flux cleaned = 0.000369487 Jy ! Component: 200 - total flux cleaned = 0.000396416 Jy ! Total flux subtracted in 200 components = 0.000396416 Jy ! Clean residual min=-0.002496 max=0.002582 Jy/beam ! Clean residual mean=0.000006 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.131152 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 113 components and 0.131152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106657Jy sigma=0.000764 ! Fit after self-cal, rms=0.106658Jy sigma=0.000764 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106658Jy sigma=0.000764 ! Fit after self-cal, rms=0.106857Jy sigma=0.000764 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.936 mas, bmaj=15.43 mas, bpa=10.54 degrees ! Estimated noise=841.632 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000281336 Jy ! Component: 100 - total flux cleaned = 0.000383099 Jy ! Component: 150 - total flux cleaned = 0.000451776 Jy ! Component: 200 - total flux cleaned = 0.000472438 Jy ! Total flux subtracted in 200 components = 0.000472438 Jy ! Clean residual min=-0.002423 max=0.002412 Jy/beam ! Clean residual mean=0.000006 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.131625 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 125 components and 0.131625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106847Jy sigma=0.000764 ! Fit after self-cal, rms=0.106864Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.73354e-05 Jy ! Component: 100 - total flux cleaned = 4.73349e-05 Jy ! Component: 150 - total flux cleaned = 2.90435e-05 Jy ! Component: 200 - total flux cleaned = 2.93143e-05 Jy ! Total flux subtracted in 200 components = 2.93143e-05 Jy ! Clean residual min=-0.002382 max=0.002407 Jy/beam ! Clean residual mean=0.000006 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.131654 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 129 components and 0.131654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106857Jy sigma=0.000764 ! Fit after self-cal, rms=0.106857Jy sigma=0.000764 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106857Jy sigma=0.000764 ! Fit after self-cal, rms=0.106759Jy sigma=0.000764 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.343 mas, bmaj=23.74 mas, bpa=0.7401 degrees ! Estimated noise=954.268 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000160942 Jy ! Component: 100 - total flux cleaned = 0.000122281 Jy ! Component: 150 - total flux cleaned = 0.00010591 Jy ! Component: 200 - total flux cleaned = 0.000106019 Jy ! Total flux subtracted in 200 components = 0.000106019 Jy ! Clean residual min=-0.002264 max=0.002223 Jy/beam ! Clean residual mean=0.000008 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.13176 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 141 components and 0.13176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106757Jy sigma=0.000764 ! Fit after self-cal, rms=0.106755Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.1534e-05 Jy ! Component: 100 - total flux cleaned = 3.14422e-05 Jy ! Component: 150 - total flux cleaned = 5.65729e-05 Jy ! Component: 200 - total flux cleaned = 7.94209e-05 Jy ! Total flux subtracted in 200 components = 7.94209e-05 Jy ! Clean residual min=-0.002249 max=0.002236 Jy/beam ! Clean residual mean=0.000008 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.13184 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 155 components and 0.131839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106754Jy sigma=0.000764 ! Fit after self-cal, rms=0.106752Jy sigma=0.000764 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.937 mas, bmaj=15.43 mas, bpa=10.52 degrees ! Estimated noise=840.822 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.937 x 15.43 at 10.52 degrees (North through East) ! Clean map min=-0.002294 max=0.098607 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.052 mas, bmaj=13.45 mas, bpa=11.9 degrees ! Estimated noise=1446.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0761844 Jy ! Component: 100 - total flux cleaned = 0.093462 Jy ! Component: 150 - total flux cleaned = 0.101614 Jy ! Component: 200 - total flux cleaned = 0.107753 Jy ! Total flux subtracted in 200 components = 0.107753 Jy ! Clean residual min=-0.004543 max=0.004520 Jy/beam ! Clean residual mean=0.000007 rms=0.001251 Jy/beam ! Combined flux in latest and established models = 0.107753 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.107753 Jy ! Inverting map and beam ! Estimated beam: bmin=3.937 mas, bmaj=15.43 mas, bpa=10.52 degrees ! Estimated noise=840.822 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00731097 Jy ! Component: 100 - total flux cleaned = 0.0115759 Jy ! Component: 150 - total flux cleaned = 0.0145579 Jy ! Component: 200 - total flux cleaned = 0.016833 Jy ! Total flux subtracted in 200 components = 0.016833 Jy ! Clean residual min=-0.002593 max=0.002489 Jy/beam ! Clean residual mean=0.000004 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.124586 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 99 components and 0.124586 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.343 mas, bmaj=23.74 mas, bpa=0.7401 degrees ! Estimated noise=954.268 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00259948 Jy ! Component: 100 - total flux cleaned = 0.00427499 Jy ! Component: 150 - total flux cleaned = 0.0054591 Jy ! Component: 200 - total flux cleaned = 0.00616379 Jy ! Total flux subtracted in 200 components = 0.00616379 Jy ! Clean residual min=-0.002389 max=0.002245 Jy/beam ! Clean residual mean=0.000008 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.130749 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000283727 Jy ! Component: 100 - total flux cleaned = 0.000480829 Jy ! Component: 150 - total flux cleaned = 0.00054785 Jy ! Component: 200 - total flux cleaned = 0.0006098 Jy ! Total flux subtracted in 200 components = 0.0006098 Jy ! Clean residual min=-0.002330 max=0.002239 Jy/beam ! Clean residual mean=0.000008 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.131359 Jy ! Adding 95 model components to the UV plane model. ! The established model now contains 183 components and 0.131359 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.937 mas, bmaj=15.43 mas, bpa=10.52 degrees ! Estimated noise=840.822 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000753326 Jy ! Component: 100 - total flux cleaned = -0.000794336 Jy ! Component: 150 - total flux cleaned = -0.000722817 Jy ! Component: 200 - total flux cleaned = -0.000691553 Jy ! Total flux subtracted in 200 components = -0.000691553 Jy ! Clean residual min=-0.002468 max=0.002384 Jy/beam ! Clean residual mean=0.000005 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.130668 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 203 components and 0.130668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106789Jy sigma=0.000764 ! Fit after self-cal, rms=0.106778Jy sigma=0.000764 wmodel J1942-3130_S_2014_08_09_pus_map.mod ! Writing 203 model components to file: J1942-3130_S_2014_08_09_pus_map.mod wobs J1942-3130_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J1942-3130_S_2014_08_09_pus_uvs.fits wwins J1942-3130_S_2014_08_09_pus_map.win ! wwins: Wrote 2 windows to J1942-3130_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 8.84367e-05 Jy ! Component: 100 - total flux cleaned = -0.00025848 Jy ! Component: 150 - total flux cleaned = -0.000367537 Jy ! Component: 200 - total flux cleaned = -0.000437553 Jy ! Component: 250 - total flux cleaned = -0.000503454 Jy ! Component: 300 - total flux cleaned = -0.000662871 Jy ! Component: 350 - total flux cleaned = -0.000786898 Jy ! Component: 400 - total flux cleaned = -0.000907286 Jy ! Component: 450 - total flux cleaned = -0.000995358 Jy ! Component: 500 - total flux cleaned = -0.00108105 Jy ! Component: 550 - total flux cleaned = -0.00110919 Jy ! Component: 600 - total flux cleaned = -0.00110962 Jy ! Component: 650 - total flux cleaned = -0.0011365 Jy ! Component: 700 - total flux cleaned = -0.00105782 Jy ! Component: 750 - total flux cleaned = -0.000955231 Jy ! Component: 800 - total flux cleaned = -0.00095542 Jy ! Component: 850 - total flux cleaned = -0.000831019 Jy ! Component: 900 - total flux cleaned = -0.000831169 Jy ! Component: 950 - total flux cleaned = -0.000758356 Jy ! Component: 1000 - total flux cleaned = -0.000663365 Jy ! Component: 1050 - total flux cleaned = -0.000593772 Jy ! Component: 1100 - total flux cleaned = -0.000524653 Jy ! Component: 1150 - total flux cleaned = -0.000456757 Jy ! Component: 1200 - total flux cleaned = -0.000344609 Jy ! Component: 1250 - total flux cleaned = -0.000212543 Jy ! Component: 1300 - total flux cleaned = -0.000147213 Jy ! Component: 1350 - total flux cleaned = -8.29105e-05 Jy ! Component: 1400 - total flux cleaned = 2.26805e-06 Jy ! Component: 1450 - total flux cleaned = 6.48386e-05 Jy ! Component: 1500 - total flux cleaned = 0.000146996 Jy ! Component: 1550 - total flux cleaned = 0.00016736 Jy ! Component: 1600 - total flux cleaned = 0.000287801 Jy ! Component: 1650 - total flux cleaned = 0.000347182 Jy ! Component: 1700 - total flux cleaned = 0.000406464 Jy ! Component: 1750 - total flux cleaned = 0.000542142 Jy ! Component: 1800 - total flux cleaned = 0.000657177 Jy ! Component: 1850 - total flux cleaned = 0.000732828 Jy ! Component: 1900 - total flux cleaned = 0.000845378 Jy ! Component: 1950 - total flux cleaned = 0.000975034 Jy ! Component: 2000 - total flux cleaned = 0.00110322 Jy ! Component: 2050 - total flux cleaned = 0.0011759 Jy ! Component: 2100 - total flux cleaned = 0.0013196 Jy ! Component: 2150 - total flux cleaned = 0.00147953 Jy ! Component: 2200 - total flux cleaned = 0.00160255 Jy ! Component: 2250 - total flux cleaned = 0.00172455 Jy ! Component: 2300 - total flux cleaned = 0.0017763 Jy ! Component: 2350 - total flux cleaned = 0.00189594 Jy ! Component: 2400 - total flux cleaned = 0.00201461 Jy ! Component: 2450 - total flux cleaned = 0.00204824 Jy ! Component: 2500 - total flux cleaned = 0.00216433 Jy ! Component: 2550 - total flux cleaned = 0.0022794 Jy ! Component: 2600 - total flux cleaned = 0.00236084 Jy ! Component: 2650 - total flux cleaned = 0.00245764 Jy ! Component: 2700 - total flux cleaned = 0.00252161 Jy ! Component: 2750 - total flux cleaned = 0.00263265 Jy ! Component: 2800 - total flux cleaned = 0.00272676 Jy ! Component: 2850 - total flux cleaned = 0.00280464 Jy ! Component: 2900 - total flux cleaned = 0.00291243 Jy ! Component: 2950 - total flux cleaned = 0.0030043 Jy ! Component: 3000 - total flux cleaned = 0.0031257 Jy ! Component: 3050 - total flux cleaned = 0.00324589 Jy ! Component: 3100 - total flux cleaned = 0.00332048 Jy ! Component: 3150 - total flux cleaned = 0.00345377 Jy ! Component: 3200 - total flux cleaned = 0.00355649 Jy ! Component: 3250 - total flux cleaned = 0.00365852 Jy ! Component: 3300 - total flux cleaned = 0.00375988 Jy ! Component: 3350 - total flux cleaned = 0.00378863 Jy ! Component: 3400 - total flux cleaned = 0.00390298 Jy ! Component: 3450 - total flux cleaned = 0.00395972 Jy ! Component: 3500 - total flux cleaned = 0.00400202 Jy ! Component: 3550 - total flux cleaned = 0.00407194 Jy ! Component: 3600 - total flux cleaned = 0.00414143 Jy ! Component: 3650 - total flux cleaned = 0.00416891 Jy ! Component: 3700 - total flux cleaned = 0.00421002 Jy ! Component: 3750 - total flux cleaned = 0.0042237 Jy ! Component: 3800 - total flux cleaned = 0.00431874 Jy ! Component: 3850 - total flux cleaned = 0.00431874 Jy ! Component: 3900 - total flux cleaned = 0.00439927 Jy ! Component: 3950 - total flux cleaned = 0.00441253 Jy ! Component: 4000 - total flux cleaned = 0.00443912 Jy ! Component: 4050 - total flux cleaned = 0.00447861 Jy ! Total flux subtracted in 4096 components = 0.00450475 Jy ! Clean residual min=-0.000850 max=0.000860 Jy/beam ! Clean residual mean=-0.000001 rms=0.000260 Jy/beam ! Combined flux in latest and established models = 0.135172 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 487 components and 0.135172 Jy ![Exited script file: muppet] wmap "J1942-3130_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.937 x 15.43 at 10.52 degrees (North through East) ! Clean map min=-0.0024065 max=0.098036 Jy/beam ! Writing clean map to FITS file: J1942-3130_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0980364 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000255496 device "J1942-3130_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1942-3130_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.781839 0.781839 1.56368 3.12736 6.25471 12.5094 25.0188 50.0377 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.098 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.937 x 15.43 at 10.52 degrees (North through East) ! Clean map min=-0.0024065 max=0.098036 Jy/beam quit ! Quitting program ! Log file J1942-3130_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 23:13:31 2016