! Started logfile: J1939+3713_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:37:44 2016 obs J1939+3713_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J1939+3713_S_2014_08_05_pus_uva.fits ! AN table 1: 72 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.453704 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1939+3713 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 5880 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1939+3713_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 224 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 224 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 224 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 224 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.845371Jy sigma=0.010200 ! Fit after self-cal, rms=0.834798Jy sigma=0.010087 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.713 mas, bmaj=8.341 mas, bpa=36.86 degrees ! Estimated noise=1249.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.127308 Jy ! Component: 100 - total flux cleaned = 0.168042 Jy ! Total flux subtracted in 100 components = 0.168042 Jy ! Clean residual min=-0.008073 max=0.016425 Jy/beam ! Clean residual mean=-0.000033 rms=0.002748 Jy/beam ! Combined flux in latest and established models = 0.168042 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.168042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077799Jy sigma=0.000863 ! Fit after self-cal, rms=0.077678Jy sigma=0.000862 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0185004 Jy ! Component: 100 - total flux cleaned = 0.0285576 Jy ! Total flux subtracted in 100 components = 0.0285576 Jy ! Clean residual min=-0.004743 max=0.005799 Jy/beam ! Clean residual mean=-0.000009 rms=0.001434 Jy/beam ! Combined flux in latest and established models = 0.1966 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 50 components and 0.1966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072229Jy sigma=0.000801 ! Fit after self-cal, rms=0.072215Jy sigma=0.000801 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.757 mas, bmaj=9.015 mas, bpa=40.85 degrees ! Estimated noise=776.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0069323 Jy ! Component: 100 - total flux cleaned = 0.0105332 Jy ! Component: 150 - total flux cleaned = 0.0126178 Jy ! Component: 200 - total flux cleaned = 0.0138745 Jy ! Total flux subtracted in 200 components = 0.0138745 Jy ! Clean residual min=-0.003909 max=0.004377 Jy/beam ! Clean residual mean=0.000011 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.210475 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 96 components and 0.210474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071346Jy sigma=0.000795 ! Fit after self-cal, rms=0.071344Jy sigma=0.000795 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.89 HN 1.07 KP 1.05 ! LA 1.09 MK 1.00* NL 0.99 OV 1.02 ! PT 1.02 SC 1.28 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.06 HN 1.01 KP 0.99 ! LA 1.08 MK 1.00* NL 1.06 OV 1.04 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.20 HN 1.04 KP 0.89 ! LA 0.84 MK 1.00* NL 0.99 OV 0.98 ! PT 1.00 SC 0.88 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.06 HN 0.97 KP 0.88 ! LA 0.81 MK 1.00* NL 1.06 OV 1.00 ! PT 1.03 SC 0.87 ! ! ! Fit before self-cal, rms=0.071344Jy sigma=0.000795 ! Fit after self-cal, rms=0.066956Jy sigma=0.000758 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.72 mas, bmaj=9.028 mas, bpa=40.44 degrees ! Estimated noise=776.193 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000452613 Jy ! Component: 100 - total flux cleaned = -0.000491723 Jy ! Component: 150 - total flux cleaned = -0.000507628 Jy ! Component: 200 - total flux cleaned = -0.00052275 Jy ! Total flux subtracted in 200 components = -0.00052275 Jy ! Clean residual min=-0.002362 max=0.002078 Jy/beam ! Clean residual mean=-0.000003 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.209952 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 113 components and 0.209952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066945Jy sigma=0.000758 ! Fit after self-cal, rms=0.066930Jy sigma=0.000757 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066930Jy sigma=0.000757 ! Fit after self-cal, rms=0.066865Jy sigma=0.000756 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.702 mas, bmaj=9.039 mas, bpa=40.24 degrees ! Estimated noise=775.673 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000153123 Jy ! Component: 100 - total flux cleaned = -0.000206452 Jy ! Component: 150 - total flux cleaned = -0.000206273 Jy ! Component: 200 - total flux cleaned = -0.000191145 Jy ! Total flux subtracted in 200 components = -0.000191145 Jy ! Clean residual min=-0.002076 max=0.001917 Jy/beam ! Clean residual mean=-0.000004 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.209761 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 117 components and 0.209761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066860Jy sigma=0.000756 ! Fit after self-cal, rms=0.066863Jy sigma=0.000756 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.96878e-05 Jy ! Component: 100 - total flux cleaned = 2.19388e-05 Jy ! Component: 150 - total flux cleaned = 2.8763e-05 Jy ! Component: 200 - total flux cleaned = 4.28188e-05 Jy ! Total flux subtracted in 200 components = 4.28188e-05 Jy ! Clean residual min=-0.002092 max=0.001905 Jy/beam ! Clean residual mean=-0.000004 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.209803 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 121 components and 0.209803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066861Jy sigma=0.000756 ! Fit after self-cal, rms=0.066860Jy sigma=0.000756 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066860Jy sigma=0.000756 ! Fit after self-cal, rms=0.066830Jy sigma=0.000756 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.689 mas, bmaj=9.045 mas, bpa=40.09 degrees ! Estimated noise=775.184 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.38385e-05 Jy ! Component: 100 - total flux cleaned = -0.000141741 Jy ! Component: 150 - total flux cleaned = -0.000141998 Jy ! Component: 200 - total flux cleaned = -0.000134657 Jy ! Total flux subtracted in 200 components = -0.000134657 Jy ! Clean residual min=-0.002089 max=0.001897 Jy/beam ! Clean residual mean=-0.000004 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.209669 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 122 components and 0.209669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066827Jy sigma=0.000756 ! Fit after self-cal, rms=0.066826Jy sigma=0.000756 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.954e-05 Jy ! Component: 100 - total flux cleaned = 1.93284e-05 Jy ! Component: 150 - total flux cleaned = 2.59335e-05 Jy ! Component: 200 - total flux cleaned = 3.26577e-05 Jy ! Total flux subtracted in 200 components = 3.26577e-05 Jy ! Clean residual min=-0.002080 max=0.001884 Jy/beam ! Clean residual mean=-0.000004 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.209701 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 124 components and 0.209701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066825Jy sigma=0.000756 ! Fit after self-cal, rms=0.066825Jy sigma=0.000756 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066825Jy sigma=0.000756 ! Fit after self-cal, rms=0.066796Jy sigma=0.000756 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.156 mas, bmaj=17.27 mas, bpa=84.7 degrees ! Estimated noise=860.536 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.51419e-05 Jy ! Component: 100 - total flux cleaned = -3.64847e-05 Jy ! Component: 150 - total flux cleaned = -1.8018e-05 Jy ! Component: 200 - total flux cleaned = -1.83127e-07 Jy ! Total flux subtracted in 200 components = -1.83127e-07 Jy ! Clean residual min=-0.001826 max=0.001948 Jy/beam ! Clean residual mean=-0.000006 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.209701 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 130 components and 0.209701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066794Jy sigma=0.000756 ! Fit after self-cal, rms=0.066794Jy sigma=0.000756 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.00385e-06 Jy ! Component: 100 - total flux cleaned = 2.54152e-05 Jy ! Component: 150 - total flux cleaned = 4.26251e-05 Jy ! Component: 200 - total flux cleaned = 5.97315e-05 Jy ! Total flux subtracted in 200 components = 5.97315e-05 Jy ! Clean residual min=-0.001820 max=0.001946 Jy/beam ! Clean residual mean=-0.000006 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.209761 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 132 components and 0.209761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066793Jy sigma=0.000756 ! Fit after self-cal, rms=0.066793Jy sigma=0.000756 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.676 mas, bmaj=9.049 mas, bpa=39.96 degrees ! Estimated noise=774.723 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.676 x 9.049 at 39.96 degrees (North through East) ! Clean map min=-0.0020382 max=0.15664 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.65 mas, bmaj=8.345 mas, bpa=36.32 degrees ! Estimated noise=1238.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.126877 Jy ! Component: 100 - total flux cleaned = 0.167972 Jy ! Component: 150 - total flux cleaned = 0.18636 Jy ! Component: 200 - total flux cleaned = 0.196329 Jy ! Total flux subtracted in 200 components = 0.196329 Jy ! Clean residual min=-0.003932 max=0.004823 Jy/beam ! Clean residual mean=-0.000015 rms=0.001025 Jy/beam ! Combined flux in latest and established models = 0.196329 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.196329 Jy ! Inverting map and beam ! Estimated beam: bmin=4.676 mas, bmaj=9.049 mas, bpa=39.96 degrees ! Estimated noise=774.723 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00619837 Jy ! Component: 100 - total flux cleaned = 0.00924817 Jy ! Component: 150 - total flux cleaned = 0.010904 Jy ! Component: 200 - total flux cleaned = 0.0118527 Jy ! Total flux subtracted in 200 components = 0.0118527 Jy ! Clean residual min=-0.002052 max=0.002003 Jy/beam ! Clean residual mean=-0.000004 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.208182 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 65 components and 0.208182 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.156 mas, bmaj=17.27 mas, bpa=84.7 degrees ! Estimated noise=860.536 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00074739 Jy ! Component: 100 - total flux cleaned = 0.000955005 Jy ! Component: 150 - total flux cleaned = 0.000990459 Jy ! Component: 200 - total flux cleaned = 0.00102491 Jy ! Total flux subtracted in 200 components = 0.00102491 Jy ! Clean residual min=-0.001944 max=0.002019 Jy/beam ! Clean residual mean=-0.000006 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.209207 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.35e-05 Jy ! Component: 100 - total flux cleaned = 5.5093e-05 Jy ! Component: 150 - total flux cleaned = 7.68166e-05 Jy ! Component: 200 - total flux cleaned = 0.000109036 Jy ! Total flux subtracted in 200 components = 0.000109036 Jy ! Clean residual min=-0.001930 max=0.002013 Jy/beam ! Clean residual mean=-0.000006 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.209316 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 75 components and 0.209316 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.676 mas, bmaj=9.049 mas, bpa=39.96 degrees ! Estimated noise=774.723 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.23313e-05 Jy ! Component: 100 - total flux cleaned = 2.81936e-05 Jy ! Component: 150 - total flux cleaned = 6.31475e-05 Jy ! Component: 200 - total flux cleaned = 9.60574e-05 Jy ! Total flux subtracted in 200 components = 9.60574e-05 Jy ! Clean residual min=-0.002071 max=0.002027 Jy/beam ! Clean residual mean=-0.000005 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.209412 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 85 components and 0.209412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066804Jy sigma=0.000756 ! Fit after self-cal, rms=0.066799Jy sigma=0.000756 wmodel J1939+3713_S_2014_08_05_pus_map.mod ! Writing 85 model components to file: J1939+3713_S_2014_08_05_pus_map.mod wobs J1939+3713_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J1939+3713_S_2014_08_05_pus_uvs.fits wwins J1939+3713_S_2014_08_05_pus_map.win ! wwins: Wrote 1 windows to J1939+3713_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000570283 Jy ! Component: 100 - total flux cleaned = -0.000977915 Jy ! Component: 150 - total flux cleaned = -0.00135759 Jy ! Component: 200 - total flux cleaned = -0.00159243 Jy ! Component: 250 - total flux cleaned = -0.00181522 Jy ! Component: 300 - total flux cleaned = -0.00200078 Jy ! Component: 350 - total flux cleaned = -0.00217899 Jy ! Component: 400 - total flux cleaned = -0.0023487 Jy ! Component: 450 - total flux cleaned = -0.00260379 Jy ! Component: 500 - total flux cleaned = -0.00280451 Jy ! Component: 550 - total flux cleaned = -0.00304069 Jy ! Component: 600 - total flux cleaned = -0.00320607 Jy ! Component: 650 - total flux cleaned = -0.00350484 Jy ! Component: 700 - total flux cleaned = -0.00375468 Jy ! Component: 750 - total flux cleaned = -0.0040148 Jy ! Component: 800 - total flux cleaned = -0.00421291 Jy ! Component: 850 - total flux cleaned = -0.00444066 Jy ! Component: 900 - total flux cleaned = -0.0046119 Jy ! Component: 950 - total flux cleaned = -0.00477952 Jy ! Component: 1000 - total flux cleaned = -0.00494266 Jy ! Component: 1050 - total flux cleaned = -0.00502235 Jy ! Component: 1100 - total flux cleaned = -0.00506951 Jy ! Component: 1150 - total flux cleaned = -0.00520808 Jy ! Component: 1200 - total flux cleaned = -0.00528326 Jy ! Component: 1250 - total flux cleaned = -0.00534243 Jy ! Component: 1300 - total flux cleaned = -0.00544416 Jy ! Component: 1350 - total flux cleaned = -0.00554416 Jy ! Component: 1400 - total flux cleaned = -0.00562823 Jy ! Component: 1450 - total flux cleaned = -0.00568333 Jy ! Component: 1500 - total flux cleaned = -0.00577783 Jy ! Component: 1550 - total flux cleaned = -0.00583093 Jy ! Component: 1600 - total flux cleaned = -0.00590932 Jy ! Component: 1650 - total flux cleaned = -0.00597341 Jy ! Component: 1700 - total flux cleaned = -0.00601133 Jy ! Component: 1750 - total flux cleaned = -0.00607351 Jy ! Component: 1800 - total flux cleaned = -0.00611035 Jy ! Component: 1850 - total flux cleaned = -0.00613465 Jy ! Component: 1900 - total flux cleaned = -0.00615843 Jy ! Component: 1950 - total flux cleaned = -0.00620542 Jy ! Component: 2000 - total flux cleaned = -0.00622843 Jy ! Component: 2050 - total flux cleaned = -0.00625136 Jy ! Component: 2100 - total flux cleaned = -0.00626265 Jy ! Component: 2150 - total flux cleaned = -0.0062738 Jy ! Component: 2200 - total flux cleaned = -0.00628478 Jy ! Component: 2250 - total flux cleaned = -0.00628478 Jy ! Component: 2300 - total flux cleaned = -0.00631718 Jy ! Component: 2350 - total flux cleaned = -0.00631724 Jy ! Component: 2400 - total flux cleaned = -0.00634884 Jy ! Component: 2450 - total flux cleaned = -0.00631755 Jy ! Component: 2500 - total flux cleaned = -0.0063588 Jy ! Component: 2550 - total flux cleaned = -0.00637922 Jy ! Component: 2600 - total flux cleaned = -0.00638923 Jy ! Component: 2650 - total flux cleaned = -0.00636921 Jy ! Component: 2700 - total flux cleaned = -0.00640876 Jy ! Component: 2750 - total flux cleaned = -0.00642832 Jy ! Component: 2800 - total flux cleaned = -0.00643784 Jy ! Component: 2850 - total flux cleaned = -0.00641855 Jy ! Component: 2900 - total flux cleaned = -0.00635205 Jy ! Component: 2950 - total flux cleaned = -0.00636165 Jy ! Component: 3000 - total flux cleaned = -0.00637105 Jy ! Component: 3050 - total flux cleaned = -0.00634319 Jy ! Component: 3100 - total flux cleaned = -0.00630651 Jy ! Component: 3150 - total flux cleaned = -0.00631563 Jy ! Component: 3200 - total flux cleaned = -0.00627941 Jy ! Component: 3250 - total flux cleaned = -0.00621664 Jy ! Component: 3300 - total flux cleaned = -0.00619898 Jy ! Component: 3350 - total flux cleaned = -0.0061637 Jy ! Component: 3400 - total flux cleaned = -0.0061287 Jy ! Component: 3450 - total flux cleaned = -0.00612002 Jy ! Component: 3500 - total flux cleaned = -0.00609412 Jy ! Component: 3550 - total flux cleaned = -0.00608563 Jy ! Component: 3600 - total flux cleaned = -0.0060601 Jy ! Component: 3650 - total flux cleaned = -0.00603472 Jy ! Component: 3700 - total flux cleaned = -0.00601782 Jy ! Component: 3750 - total flux cleaned = -0.00600114 Jy ! Component: 3800 - total flux cleaned = -0.00598445 Jy ! Component: 3850 - total flux cleaned = -0.00594299 Jy ! Component: 3900 - total flux cleaned = -0.00592653 Jy ! Component: 3950 - total flux cleaned = -0.00592657 Jy ! Component: 4000 - total flux cleaned = -0.00591023 Jy ! Component: 4050 - total flux cleaned = -0.00591837 Jy ! Total flux subtracted in 4096 components = -0.00591837 Jy ! Clean residual min=-0.000519 max=0.000434 Jy/beam ! Clean residual mean=-0.000004 rms=0.000150 Jy/beam ! Combined flux in latest and established models = 0.203494 Jy keep ! Adding 262 model components to the UV plane model. ! The established model now contains 347 components and 0.203494 Jy ![Exited script file: muppet] wmap "J1939+3713_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.676 x 9.049 at 39.96 degrees (North through East) ! Clean map min=-0.0016571 max=0.15793 Jy/beam ! Writing clean map to FITS file: J1939+3713_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.15793 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000146479 device "J1939+3713_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J1939+3713_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.278249 0.278249 0.556497 1.11299 2.22599 4.45198 8.90395 17.8079 35.6158 71.2316 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.157 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.676 x 9.049 at 39.96 degrees (North through East) ! Clean map min=-0.0016571 max=0.15793 Jy/beam quit ! Quitting program ! Log file J1939+3713_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:37:48 2016