! Started logfile: J1924+3329_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:35:28 2017 obs J1924+3329_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1924+3329_S_2014_01_04_pus_uva.fits ! AN table 1: 125 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.431778 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1924+3329 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 7772 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1924+3329_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 374 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 374 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 374 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 374 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.940618Jy sigma=0.014328 ! Fit after self-cal, rms=0.886540Jy sigma=0.013143 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.675 mas, bmaj=7.924 mas, bpa=15.18 degrees ! Estimated noise=926.345 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.11315 Jy ! Component: 100 - total flux cleaned = 0.159719 Jy ! Total flux subtracted in 100 components = 0.159719 Jy ! Clean residual min=-0.043421 max=0.043182 Jy/beam ! Clean residual mean=0.000127 rms=0.015582 Jy/beam ! Combined flux in latest and established models = 0.159719 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 0.159719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235705Jy sigma=0.003522 ! Fit after self-cal, rms=0.234973Jy sigma=0.003515 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.399 mas, bmaj=8.465 mas, bpa=14.3 degrees ! Estimated noise=555.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00508088 Jy ! Component: 100 - total flux cleaned = 0.00120901 Jy ! Component: 150 - total flux cleaned = -0.00422368 Jy ! Component: 200 - total flux cleaned = -0.00865544 Jy ! Total flux subtracted in 200 components = -0.00865544 Jy ! Clean residual min=-0.035128 max=0.035064 Jy/beam ! Clean residual mean=0.000261 rms=0.015337 Jy/beam ! Combined flux in latest and established models = 0.151063 Jy ! Performing phase self-cal ! Adding 141 model components to the UV plane model. ! The established model now contains 176 components and 0.151064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160136Jy sigma=0.002178 ! Fit after self-cal, rms=0.157480Jy sigma=0.002146 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* KP 1.00* LA 0.78 ! MK 2.11 NL 1.01 OV 0.80 PT 0.67 ! SC 1.19 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* KP 1.00* LA 0.77 ! MK 2.37 NL 0.95 OV 0.85 PT 0.64 ! SC 1.36 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* KP 1.00* LA 0.65 ! MK 1.83 NL 0.86 OV 0.77 PT 0.63 ! SC 1.42 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.00* KP 1.00* LA 0.71 ! MK 1.44 NL 0.95 OV 0.77 PT 0.66 ! SC 1.15 ! ! ! Fit before self-cal, rms=0.157480Jy sigma=0.002146 ! Fit after self-cal, rms=0.103321Jy sigma=0.001407 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.066 mas, bmaj=9.157 mas, bpa=16.14 degrees ! Estimated noise=479.971 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00450191 Jy ! Component: 100 - total flux cleaned = 0.00510323 Jy ! Component: 150 - total flux cleaned = 0.0085748 Jy ! Component: 200 - total flux cleaned = 0.0110506 Jy ! Total flux subtracted in 200 components = 0.0110506 Jy ! Clean residual min=-0.007541 max=0.007597 Jy/beam ! Clean residual mean=0.000020 rms=0.002722 Jy/beam ! Combined flux in latest and established models = 0.162114 Jy ! Performing phase self-cal ! Adding 75 model components to the UV plane model. ! The established model now contains 251 components and 0.162114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095719Jy sigma=0.001132 ! Fit after self-cal, rms=0.095740Jy sigma=0.001109 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095740Jy sigma=0.001109 ! Fit after self-cal, rms=0.107412Jy sigma=0.001073 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.096 mas, bmaj=9.161 mas, bpa=15.4 degrees ! Estimated noise=457.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175388 Jy ! Component: 100 - total flux cleaned = 0.00175587 Jy ! Component: 150 - total flux cleaned = 0.00376885 Jy ! Component: 200 - total flux cleaned = 0.00584995 Jy ! Total flux subtracted in 200 components = 0.00584995 Jy ! Clean residual min=-0.004644 max=0.004626 Jy/beam ! Clean residual mean=0.000002 rms=0.001616 Jy/beam ! Combined flux in latest and established models = 0.167964 Jy selfcal ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 303 components and 0.167964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104741Jy sigma=0.000997 ! Fit after self-cal, rms=0.104985Jy sigma=0.000994 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00268866 Jy ! Component: 100 - total flux cleaned = 0.00421725 Jy ! Component: 150 - total flux cleaned = 0.00421284 Jy ! Component: 200 - total flux cleaned = 0.00441583 Jy ! Total flux subtracted in 200 components = 0.00441583 Jy ! Clean residual min=-0.003361 max=0.003379 Jy/beam ! Clean residual mean=0.000003 rms=0.001200 Jy/beam ! Combined flux in latest and established models = 0.17238 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 339 components and 0.17238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103576Jy sigma=0.000966 ! Fit after self-cal, rms=0.103414Jy sigma=0.000965 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103414Jy sigma=0.000965 ! Fit after self-cal, rms=0.088621Jy sigma=0.000960 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.988 mas, bmaj=9.103 mas, bpa=15.64 degrees ! Estimated noise=444.168 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00152083 Jy ! Component: 100 - total flux cleaned = -0.00315001 Jy ! Component: 150 - total flux cleaned = -0.00515252 Jy ! Component: 200 - total flux cleaned = -0.00702899 Jy ! Total flux subtracted in 200 components = -0.00702899 Jy ! Clean residual min=-0.002488 max=0.002489 Jy/beam ! Clean residual mean=0.000002 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.165351 Jy selfcal ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 387 components and 0.165351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087755Jy sigma=0.000944 ! Fit after self-cal, rms=0.087712Jy sigma=0.000944 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000588082 Jy ! Component: 100 - total flux cleaned = -0.00188612 Jy ! Component: 150 - total flux cleaned = -0.00350255 Jy ! Component: 200 - total flux cleaned = -0.00438177 Jy ! Total flux subtracted in 200 components = -0.00438177 Jy ! Clean residual min=-0.002056 max=0.002065 Jy/beam ! Clean residual mean=0.000002 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.160969 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 416 components and 0.160969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087136Jy sigma=0.000935 ! Fit after self-cal, rms=0.087106Jy sigma=0.000934 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087106Jy sigma=0.000934 ! Fit after self-cal, rms=0.081807Jy sigma=0.000933 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.436 mas, bmaj=10.32 mas, bpa=8.148 degrees ! Estimated noise=433.442 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000163618 Jy ! Component: 100 - total flux cleaned = -0.00042298 Jy ! Component: 150 - total flux cleaned = -0.000651453 Jy ! Component: 200 - total flux cleaned = -0.000794136 Jy ! Total flux subtracted in 200 components = -0.000794136 Jy ! Clean residual min=-0.001167 max=0.001171 Jy/beam ! Clean residual mean=0.000001 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.160175 Jy selfcal ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 468 components and 0.160175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081600Jy sigma=0.000929 ! Fit after self-cal, rms=0.081589Jy sigma=0.000929 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000129192 Jy ! Component: 100 - total flux cleaned = -0.000194515 Jy ! Component: 150 - total flux cleaned = -0.000257528 Jy ! Component: 200 - total flux cleaned = -0.0004294 Jy ! Total flux subtracted in 200 components = -0.0004294 Jy ! Clean residual min=-0.000947 max=0.000952 Jy/beam ! Clean residual mean=0.000001 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.159746 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 510 components and 0.159746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081440Jy sigma=0.000926 ! Fit after self-cal, rms=0.081435Jy sigma=0.000926 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.928 mas, bmaj=9.066 mas, bpa=15.68 degrees ! Estimated noise=436.223 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.928 x 9.066 at 15.68 degrees (North through East) ! Clean map min=-0.022671 max=0.097102 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.985 mas, bmaj=8.412 mas, bpa=16.47 degrees ! Estimated noise=800.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0925018 Jy ! Component: 100 - total flux cleaned = 0.122967 Jy ! Component: 150 - total flux cleaned = 0.13558 Jy ! Component: 200 - total flux cleaned = 0.140829 Jy ! Total flux subtracted in 200 components = 0.140829 Jy ! Clean residual min=-0.026224 max=0.026123 Jy/beam ! Clean residual mean=0.000078 rms=0.009656 Jy/beam ! Combined flux in latest and established models = 0.140829 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 64 model components to the UV plane model. ! The established model now contains 64 components and 0.140829 Jy ! Inverting map and beam ! Estimated beam: bmin=3.928 mas, bmaj=9.066 mas, bpa=15.68 degrees ! Estimated noise=436.223 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00997566 Jy ! Component: 100 - total flux cleaned = -0.00977565 Jy ! Component: 150 - total flux cleaned = -0.00980127 Jy ! Component: 200 - total flux cleaned = -0.0109719 Jy ! Total flux subtracted in 200 components = -0.0109719 Jy ! Clean residual min=-0.017296 max=0.017292 Jy/beam ! Clean residual mean=0.000110 rms=0.006891 Jy/beam ! Combined flux in latest and established models = 0.129857 Jy ! Adding 84 model components to the UV plane model. ! The established model now contains 139 components and 0.129857 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.436 mas, bmaj=10.32 mas, bpa=8.148 degrees ! Estimated noise=433.442 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00906409 Jy ! Component: 100 - total flux cleaned = -0.0149607 Jy ! Component: 150 - total flux cleaned = -0.0163146 Jy ! Component: 200 - total flux cleaned = -0.0192011 Jy ! Total flux subtracted in 200 components = -0.0192011 Jy ! Clean residual min=-0.008661 max=0.008601 Jy/beam ! Clean residual mean=0.000076 rms=0.003729 Jy/beam ! Combined flux in latest and established models = 0.110656 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.004242 Jy ! Component: 100 - total flux cleaned = -0.00573478 Jy ! Component: 150 - total flux cleaned = -0.00807807 Jy ! Component: 200 - total flux cleaned = -0.00838537 Jy ! Total flux subtracted in 200 components = -0.00838537 Jy ! Clean residual min=-0.004637 max=0.004637 Jy/beam ! Clean residual mean=0.000059 rms=0.001746 Jy/beam ! Combined flux in latest and established models = 0.10227 Jy ! Adding 182 model components to the UV plane model. ! The established model now contains 310 components and 0.10227 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.928 mas, bmaj=9.066 mas, bpa=15.68 degrees ! Estimated noise=436.223 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147055 Jy ! Component: 100 - total flux cleaned = 1.37381e-05 Jy ! Component: 150 - total flux cleaned = -0.000414509 Jy ! Component: 200 - total flux cleaned = -0.00165561 Jy ! Total flux subtracted in 200 components = -0.00165561 Jy ! Clean residual min=-0.003290 max=0.003301 Jy/beam ! Clean residual mean=0.000004 rms=0.001085 Jy/beam ! Combined flux in latest and established models = 0.100615 Jy selfcal ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 369 components and 0.100615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083918Jy sigma=0.000960 ! Fit after self-cal, rms=0.083266Jy sigma=0.000953 wmodel J1924+3329_S_2014_01_04_pus_map.mod ! Writing 369 model components to file: J1924+3329_S_2014_01_04_pus_map.mod wobs J1924+3329_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1924+3329_S_2014_01_04_pus_uvs.fits wwins J1924+3329_S_2014_01_04_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J1924+3329_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.928 x 9.066 at 15.68 degrees (North through East) ! Clean map min=-0.023475 max=0.074001 Jy/beam ! Writing clean map to FITS file: J1924+3329_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0740006 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000998776 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.04906 4.04906 8.09812 16.1962 32.3925 64.785 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.074 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.928 x 9.066 at 15.68 degrees (North through East) ! Clean map min=-0.023475 max=0.074001 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1924+3329_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:35:31 2017