! Started logfile: J1922+1530_S_2014_08_09_pus_uvs.log on Tue Nov 29 23:12:32 2016 obs J1922+1530_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J1922+1530_S_2014_08_09_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.777005 visibilities/baseline/integration-bin. ! Found source: J1922+1530 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 16084 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1922+1530_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.981921Jy sigma=0.011198 ! Fit after self-cal, rms=0.955864Jy sigma=0.010912 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.814 mas, bmaj=7.967 mas, bpa=21.06 degrees ! Estimated noise=876.605 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0305335 Jy ! Component: 100 - total flux cleaned = 0.0418796 Jy ! Total flux subtracted in 100 components = 0.0418796 Jy ! Clean residual min=-0.005361 max=0.009564 Jy/beam ! Clean residual mean=-0.000030 rms=0.002100 Jy/beam ! Combined flux in latest and established models = 0.0418796 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.0418796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087384Jy sigma=0.000955 ! Fit after self-cal, rms=0.086622Jy sigma=0.000946 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.567 mas, bmaj=8.657 mas, bpa=19.03 degrees ! Estimated noise=495.053 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0186324 Jy ! Component: 100 - total flux cleaned = 0.0316628 Jy ! Component: 150 - total flux cleaned = 0.0409408 Jy ! Component: 200 - total flux cleaned = 0.0475534 Jy ! Total flux subtracted in 200 components = 0.0475534 Jy ! Clean residual min=-0.009513 max=0.013716 Jy/beam ! Clean residual mean=-0.000052 rms=0.003322 Jy/beam ! Combined flux in latest and established models = 0.0894331 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 60 components and 0.0894331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081432Jy sigma=0.000885 ! Fit after self-cal, rms=0.080935Jy sigma=0.000879 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.49 FD 1.04 HN 0.96 KP 1.24 ! LA 0.80 MK 1.00* NL 2.03 OV 2.32 ! PT 0.54 SC 1.23 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.56 FD 1.23 HN 1.10 KP 1.19 ! LA 0.73 MK 1.00* NL 2.00 OV 2.30 ! PT 0.53 SC 1.43 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.41 FD 1.38 HN 1.01 KP 0.96 ! LA 0.58 MK 1.00* NL 1.97 OV 2.19 ! PT 0.53 SC 1.18 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.41 FD 1.18 HN 0.85 KP 0.93 ! LA 0.56 MK 1.00* NL 2.00 OV 2.10 ! PT 0.54 SC 1.09 ! ! ! Fit before self-cal, rms=0.080935Jy sigma=0.000879 ! Fit after self-cal, rms=0.126028Jy sigma=0.000790 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.841 mas, bmaj=8.98 mas, bpa=15.74 degrees ! Estimated noise=552.107 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00173997 Jy ! Component: 100 - total flux cleaned = 0.00131659 Jy ! Component: 150 - total flux cleaned = 0.00118024 Jy ! Component: 200 - total flux cleaned = 0.00112681 Jy ! Total flux subtracted in 200 components = 0.00112681 Jy ! Clean residual min=-0.005772 max=0.007173 Jy/beam ! Clean residual mean=-0.000031 rms=0.001921 Jy/beam ! Combined flux in latest and established models = 0.0905599 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 70 components and 0.0905599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125606Jy sigma=0.000791 ! Fit after self-cal, rms=0.129370Jy sigma=0.000776 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129370Jy sigma=0.000776 ! Fit after self-cal, rms=0.178867Jy sigma=0.000762 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.886 mas, bmaj=9.05 mas, bpa=13.69 degrees ! Estimated noise=584.525 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145966 Jy ! Component: 100 - total flux cleaned = 0.00145871 Jy ! Component: 150 - total flux cleaned = 0.001501 Jy ! Component: 200 - total flux cleaned = 0.00149968 Jy ! Total flux subtracted in 200 components = 0.00149968 Jy ! Clean residual min=-0.004165 max=0.005116 Jy/beam ! Clean residual mean=-0.000017 rms=0.001336 Jy/beam ! Combined flux in latest and established models = 0.0920596 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 74 components and 0.0920596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178766Jy sigma=0.000762 ! Fit after self-cal, rms=0.179801Jy sigma=0.000761 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000572857 Jy ! Component: 100 - total flux cleaned = -0.000604144 Jy ! Component: 150 - total flux cleaned = -0.000680329 Jy ! Component: 200 - total flux cleaned = -0.000702749 Jy ! Total flux subtracted in 200 components = -0.000702749 Jy ! Clean residual min=-0.003993 max=0.004504 Jy/beam ! Clean residual mean=-0.000017 rms=0.001270 Jy/beam ! Combined flux in latest and established models = 0.0913568 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 84 components and 0.0913568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179799Jy sigma=0.000761 ! Fit after self-cal, rms=0.179787Jy sigma=0.000761 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179787Jy sigma=0.000761 ! Fit after self-cal, rms=0.193075Jy sigma=0.000760 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.897 mas, bmaj=8.966 mas, bpa=12.04 degrees ! Estimated noise=587.726 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115922 Jy ! Component: 100 - total flux cleaned = 0.00120352 Jy ! Component: 150 - total flux cleaned = 0.00123925 Jy ! Component: 200 - total flux cleaned = 0.0012388 Jy ! Total flux subtracted in 200 components = 0.0012388 Jy ! Clean residual min=-0.003768 max=0.004479 Jy/beam ! Clean residual mean=-0.000016 rms=0.001266 Jy/beam ! Combined flux in latest and established models = 0.0925956 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 87 components and 0.0925956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193022Jy sigma=0.000760 ! Fit after self-cal, rms=0.193180Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.29392e-05 Jy ! Component: 100 - total flux cleaned = -5.19848e-05 Jy ! Component: 150 - total flux cleaned = -7.6346e-05 Jy ! Component: 200 - total flux cleaned = -5.37152e-05 Jy ! Total flux subtracted in 200 components = -5.37152e-05 Jy ! Clean residual min=-0.003843 max=0.004357 Jy/beam ! Clean residual mean=-0.000016 rms=0.001266 Jy/beam ! Combined flux in latest and established models = 0.0925419 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 88 components and 0.0925419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193165Jy sigma=0.000760 ! Fit after self-cal, rms=0.193146Jy sigma=0.000760 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193146Jy sigma=0.000760 ! Fit after self-cal, rms=0.200745Jy sigma=0.000760 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.537 mas, bmaj=11.85 mas, bpa=-10.59 degrees ! Estimated noise=627.432 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012181 Jy ! Component: 100 - total flux cleaned = 0.00130053 Jy ! Component: 150 - total flux cleaned = 0.00126739 Jy ! Component: 200 - total flux cleaned = 0.00124151 Jy ! Total flux subtracted in 200 components = 0.00124151 Jy ! Clean residual min=-0.004695 max=0.005752 Jy/beam ! Clean residual mean=-0.000026 rms=0.001866 Jy/beam ! Combined flux in latest and established models = 0.0937834 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 90 components and 0.0937834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200710Jy sigma=0.000759 ! Fit after self-cal, rms=0.200739Jy sigma=0.000759 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.01698e-05 Jy ! Component: 100 - total flux cleaned = 8.20031e-05 Jy ! Component: 150 - total flux cleaned = 8.20908e-05 Jy ! Component: 200 - total flux cleaned = 6.74717e-05 Jy ! Total flux subtracted in 200 components = 6.74717e-05 Jy ! Clean residual min=-0.004803 max=0.005821 Jy/beam ! Clean residual mean=-0.000025 rms=0.001872 Jy/beam ! Combined flux in latest and established models = 0.0938509 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 96 components and 0.0938508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200730Jy sigma=0.000759 ! Fit after self-cal, rms=0.200707Jy sigma=0.000759 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.9 mas, bmaj=8.864 mas, bpa=10.39 degrees ! Estimated noise=585.953 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.9 x 8.864 at 10.39 degrees (North through East) ! Clean map min=-0.003692 max=0.050384 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.998 mas, bmaj=7.83 mas, bpa=13.64 degrees ! Estimated noise=1100.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0373329 Jy ! Component: 100 - total flux cleaned = 0.0539824 Jy ! Component: 150 - total flux cleaned = 0.0643845 Jy ! Component: 200 - total flux cleaned = 0.071583 Jy ! Total flux subtracted in 200 components = 0.071583 Jy ! Clean residual min=-0.004461 max=0.005317 Jy/beam ! Clean residual mean=-0.000013 rms=0.001290 Jy/beam ! Combined flux in latest and established models = 0.0715831 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.0715831 Jy ! Inverting map and beam ! Estimated beam: bmin=4.9 mas, bmaj=8.864 mas, bpa=10.39 degrees ! Estimated noise=585.953 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00856938 Jy ! Component: 100 - total flux cleaned = 0.0137708 Jy ! Component: 150 - total flux cleaned = 0.0171851 Jy ! Component: 200 - total flux cleaned = 0.0183724 Jy ! Total flux subtracted in 200 components = 0.0183724 Jy ! Clean residual min=-0.004056 max=0.004310 Jy/beam ! Clean residual mean=-0.000017 rms=0.001273 Jy/beam ! Combined flux in latest and established models = 0.0899554 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 80 components and 0.0899554 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.537 mas, bmaj=11.85 mas, bpa=-10.59 degrees ! Estimated noise=627.432 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013738 Jy ! Component: 100 - total flux cleaned = 0.00161267 Jy ! Component: 150 - total flux cleaned = 0.00173703 Jy ! Component: 200 - total flux cleaned = 0.0018395 Jy ! Total flux subtracted in 200 components = 0.0018395 Jy ! Clean residual min=-0.005103 max=0.006020 Jy/beam ! Clean residual mean=-0.000019 rms=0.001863 Jy/beam ! Combined flux in latest and established models = 0.0917949 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.36735e-05 Jy ! Component: 100 - total flux cleaned = 8.4256e-05 Jy ! Component: 150 - total flux cleaned = 1.8075e-05 Jy ! Component: 200 - total flux cleaned = -4.32282e-05 Jy ! Total flux subtracted in 200 components = -4.32282e-05 Jy ! Clean residual min=-0.005131 max=0.006104 Jy/beam ! Clean residual mean=-0.000017 rms=0.001868 Jy/beam ! Combined flux in latest and established models = 0.0917517 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 140 components and 0.0917517 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.9 mas, bmaj=8.864 mas, bpa=10.39 degrees ! Estimated noise=585.953 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000134515 Jy ! Component: 100 - total flux cleaned = -9.92815e-05 Jy ! Component: 150 - total flux cleaned = -0.000130834 Jy ! Component: 200 - total flux cleaned = -0.000130653 Jy ! Total flux subtracted in 200 components = -0.000130653 Jy ! Clean residual min=-0.003908 max=0.004211 Jy/beam ! Clean residual mean=-0.000010 rms=0.001257 Jy/beam ! Combined flux in latest and established models = 0.091621 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 157 components and 0.091621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200583Jy sigma=0.000759 ! Fit after self-cal, rms=0.200155Jy sigma=0.000759 wmodel J1922+1530_S_2014_08_09_pus_map.mod ! Writing 157 model components to file: J1922+1530_S_2014_08_09_pus_map.mod wobs J1922+1530_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J1922+1530_S_2014_08_09_pus_uvs.fits wwins J1922+1530_S_2014_08_09_pus_map.win ! wwins: Wrote 2 windows to J1922+1530_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184057 Jy ! Component: 100 - total flux cleaned = 0.00304065 Jy ! Component: 150 - total flux cleaned = 0.00391546 Jy ! Component: 200 - total flux cleaned = 0.00449807 Jy ! Component: 250 - total flux cleaned = 0.00531085 Jy ! Component: 300 - total flux cleaned = 0.00585628 Jy ! Component: 350 - total flux cleaned = 0.0064468 Jy ! Component: 400 - total flux cleaned = 0.00690734 Jy ! Component: 450 - total flux cleaned = 0.00746922 Jy ! Component: 500 - total flux cleaned = 0.00801641 Jy ! Component: 550 - total flux cleaned = 0.00838941 Jy ! Component: 600 - total flux cleaned = 0.00880738 Jy ! Component: 650 - total flux cleaned = 0.00931868 Jy ! Component: 700 - total flux cleaned = 0.00966927 Jy ! Component: 750 - total flux cleaned = 0.0100633 Jy ! Component: 800 - total flux cleaned = 0.0104498 Jy ! Component: 850 - total flux cleaned = 0.0107353 Jy ! Component: 900 - total flux cleaned = 0.0112486 Jy ! Component: 950 - total flux cleaned = 0.0116615 Jy ! Component: 1000 - total flux cleaned = 0.0122036 Jy ! Component: 1050 - total flux cleaned = 0.0126926 Jy ! Component: 1100 - total flux cleaned = 0.0129557 Jy ! Component: 1150 - total flux cleaned = 0.0132156 Jy ! Component: 1200 - total flux cleaned = 0.0135992 Jy ! Component: 1250 - total flux cleaned = 0.0138513 Jy ! Component: 1300 - total flux cleaned = 0.0141827 Jy ! Component: 1350 - total flux cleaned = 0.0144281 Jy ! Component: 1400 - total flux cleaned = 0.014751 Jy ! Component: 1450 - total flux cleaned = 0.0150304 Jy ! Component: 1500 - total flux cleaned = 0.0153845 Jy ! Component: 1550 - total flux cleaned = 0.0157726 Jy ! Component: 1600 - total flux cleaned = 0.0160416 Jy ! Component: 1650 - total flux cleaned = 0.0164587 Jy ! Component: 1700 - total flux cleaned = 0.0169836 Jy ! Component: 1750 - total flux cleaned = 0.0172794 Jy ! Component: 1800 - total flux cleaned = 0.0174626 Jy ! Component: 1850 - total flux cleaned = 0.0177889 Jy ! Component: 1900 - total flux cleaned = 0.0180047 Jy ! Component: 1950 - total flux cleaned = 0.0183247 Jy ! Component: 2000 - total flux cleaned = 0.0187463 Jy ! Component: 2050 - total flux cleaned = 0.0189548 Jy ! Component: 2100 - total flux cleaned = 0.0192302 Jy ! Component: 2150 - total flux cleaned = 0.0194345 Jy ! Component: 2200 - total flux cleaned = 0.0196706 Jy ! Component: 2250 - total flux cleaned = 0.0198703 Jy ! Component: 2300 - total flux cleaned = 0.0200026 Jy ! Component: 2350 - total flux cleaned = 0.0202314 Jy ! Component: 2400 - total flux cleaned = 0.0204253 Jy ! Component: 2450 - total flux cleaned = 0.0204901 Jy ! Component: 2500 - total flux cleaned = 0.0206492 Jy ! Component: 2550 - total flux cleaned = 0.020901 Jy ! Component: 2600 - total flux cleaned = 0.0209949 Jy ! Component: 2650 - total flux cleaned = 0.0211804 Jy ! Component: 2700 - total flux cleaned = 0.0214863 Jy ! Component: 2750 - total flux cleaned = 0.0215468 Jy ! Component: 2800 - total flux cleaned = 0.0216673 Jy ! Component: 2850 - total flux cleaned = 0.0216969 Jy ! Component: 2900 - total flux cleaned = 0.0218449 Jy ! Component: 2950 - total flux cleaned = 0.0219625 Jy ! Component: 3000 - total flux cleaned = 0.022079 Jy ! Component: 3050 - total flux cleaned = 0.0221078 Jy ! Component: 3100 - total flux cleaned = 0.0222799 Jy ! Component: 3150 - total flux cleaned = 0.0223085 Jy ! Component: 3200 - total flux cleaned = 0.0224779 Jy ! Component: 3250 - total flux cleaned = 0.0225339 Jy ! Component: 3300 - total flux cleaned = 0.022673 Jy ! Component: 3350 - total flux cleaned = 0.0227276 Jy ! Component: 3400 - total flux cleaned = 0.0227278 Jy ! Component: 3450 - total flux cleaned = 0.0228914 Jy ! Component: 3500 - total flux cleaned = 0.023027 Jy ! Component: 3550 - total flux cleaned = 0.0231346 Jy ! Component: 3600 - total flux cleaned = 0.0233217 Jy ! Component: 3650 - total flux cleaned = 0.0233483 Jy ! Component: 3700 - total flux cleaned = 0.0234801 Jy ! Component: 3750 - total flux cleaned = 0.0235587 Jy ! Component: 3800 - total flux cleaned = 0.0236887 Jy ! Component: 3850 - total flux cleaned = 0.0237664 Jy ! Component: 3900 - total flux cleaned = 0.0238692 Jy ! Component: 3950 - total flux cleaned = 0.023997 Jy ! Component: 4000 - total flux cleaned = 0.0241239 Jy ! Component: 4050 - total flux cleaned = 0.0242501 Jy ! Total flux subtracted in 4096 components = 0.0242501 Jy ! Clean residual min=-0.001444 max=0.001352 Jy/beam ! Clean residual mean=-0.000007 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.115871 Jy keep ! Adding 406 model components to the UV plane model. ! The established model now contains 562 components and 0.115871 Jy ![Exited script file: muppet] wmap "J1922+1530_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.9 x 8.864 at 10.39 degrees (North through East) ! Clean map min=-0.0031763 max=0.050867 Jy/beam ! Writing clean map to FITS file: J1922+1530_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.050867 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00058765 device "J1922+1530_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1922+1530_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.46581 3.46581 6.93161 13.8632 27.7264 55.4529 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.05 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.9 x 8.864 at 10.39 degrees (North through East) ! Clean map min=-0.0031763 max=0.050867 Jy/beam quit ! Quitting program ! Log file J1922+1530_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 23:12:37 2016