! Started logfile: J1916-2708_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:35:18 2017 obs J1916-2708_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1916-2708_S_2014_01_04_pus_uva.fits ! AN table 1: 75 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.498889 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1916-2708 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 5388 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1916-2708_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.955357Jy sigma=0.009880 ! Fit after self-cal, rms=0.757280Jy sigma=0.008164 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.281 mas, bmaj=5.572 mas, bpa=-2.827 degrees ! Estimated noise=1428.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.186904 Jy ! Component: 100 - total flux cleaned = 0.228411 Jy ! Total flux subtracted in 100 components = 0.228411 Jy ! Clean residual min=-0.011844 max=0.018172 Jy/beam ! Clean residual mean=-0.000039 rms=0.003456 Jy/beam ! Combined flux in latest and established models = 0.228411 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.228411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127834Jy sigma=0.001167 ! Fit after self-cal, rms=0.127818Jy sigma=0.001167 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.744 mas, bmaj=6.552 mas, bpa=-2.662 degrees ! Estimated noise=985.255 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0166371 Jy ! Component: 100 - total flux cleaned = 0.0239919 Jy ! Component: 150 - total flux cleaned = 0.027493 Jy ! Component: 200 - total flux cleaned = 0.0286266 Jy ! Total flux subtracted in 200 components = 0.0286266 Jy ! Clean residual min=-0.009683 max=0.017708 Jy/beam ! Clean residual mean=-0.000061 rms=0.003429 Jy/beam ! Combined flux in latest and established models = 0.257038 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 25 components and 0.257038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124201Jy sigma=0.001173 ! Fit after self-cal, rms=0.124201Jy sigma=0.001173 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* KP 1.00* LA 0.97 ! MK 1.02 NL 0.99 OV 0.94 PT 0.93 ! SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.49 FD 1.00* KP 1.00* LA 0.97 ! MK 0.98 NL 1.04 OV 0.94 PT 0.98 ! SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* KP 1.00* LA 0.81 ! MK 1.00 NL 0.97 OV 0.87 PT 0.92 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 FD 1.00* KP 1.00* LA 0.87 ! MK 0.98 NL 1.06 OV 0.95 PT 0.94 ! SC 0.93 ! ! ! Fit before self-cal, rms=0.124201Jy sigma=0.001173 ! Fit after self-cal, rms=0.116533Jy sigma=0.001074 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.719 mas, bmaj=6.592 mas, bpa=-2.572 degrees ! Estimated noise=998.863 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00455641 Jy ! Component: 100 - total flux cleaned = 0.00594471 Jy ! Component: 150 - total flux cleaned = 0.00642342 Jy ! Component: 200 - total flux cleaned = 0.0064944 Jy ! Total flux subtracted in 200 components = 0.0064944 Jy ! Clean residual min=-0.007930 max=0.006056 Jy/beam ! Clean residual mean=-0.000008 rms=0.001705 Jy/beam ! Combined flux in latest and established models = 0.263533 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 35 components and 0.263533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116183Jy sigma=0.001074 ! Fit after self-cal, rms=0.115548Jy sigma=0.001073 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115548Jy sigma=0.001073 ! Fit after self-cal, rms=0.117850Jy sigma=0.001062 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.709 mas, bmaj=6.575 mas, bpa=-2.757 degrees ! Estimated noise=1017.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0044242 Jy ! Component: 100 - total flux cleaned = 0.00656375 Jy ! Component: 150 - total flux cleaned = 0.0071331 Jy ! Component: 200 - total flux cleaned = 0.00741103 Jy ! Total flux subtracted in 200 components = 0.00741103 Jy ! Clean residual min=-0.006337 max=0.005627 Jy/beam ! Clean residual mean=-0.000001 rms=0.001373 Jy/beam ! Combined flux in latest and established models = 0.270944 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 43 components and 0.270944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117554Jy sigma=0.001062 ! Fit after self-cal, rms=0.117551Jy sigma=0.001062 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.58651e-05 Jy ! Component: 100 - total flux cleaned = 8.73883e-05 Jy ! Component: 150 - total flux cleaned = 0.000125772 Jy ! Component: 200 - total flux cleaned = 0.000162045 Jy ! Total flux subtracted in 200 components = 0.000162045 Jy ! Clean residual min=-0.006302 max=0.005630 Jy/beam ! Clean residual mean=-0.000001 rms=0.001364 Jy/beam ! Combined flux in latest and established models = 0.271106 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 0.271106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117513Jy sigma=0.001062 ! Fit after self-cal, rms=0.117512Jy sigma=0.001062 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117512Jy sigma=0.001062 ! Fit after self-cal, rms=0.119608Jy sigma=0.001054 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.705 mas, bmaj=6.557 mas, bpa=-2.881 degrees ! Estimated noise=1029.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00307982 Jy ! Component: 100 - total flux cleaned = 0.00441426 Jy ! Component: 150 - total flux cleaned = 0.00451518 Jy ! Component: 200 - total flux cleaned = 0.00454237 Jy ! Total flux subtracted in 200 components = 0.00454237 Jy ! Clean residual min=-0.005548 max=0.004555 Jy/beam ! Clean residual mean=-0.000000 rms=0.001223 Jy/beam ! Combined flux in latest and established models = 0.275648 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 0.275648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119446Jy sigma=0.001054 ! Fit after self-cal, rms=0.119574Jy sigma=0.001054 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.65283e-05 Jy ! Component: 100 - total flux cleaned = 4.63223e-05 Jy ! Component: 150 - total flux cleaned = 9.58913e-05 Jy ! Component: 200 - total flux cleaned = 0.000119631 Jy ! Total flux subtracted in 200 components = 0.000119631 Jy ! Clean residual min=-0.005447 max=0.004509 Jy/beam ! Clean residual mean=-0.000000 rms=0.001213 Jy/beam ! Combined flux in latest and established models = 0.275768 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 50 components and 0.275768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119555Jy sigma=0.001054 ! Fit after self-cal, rms=0.119553Jy sigma=0.001054 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119553Jy sigma=0.001054 ! Fit after self-cal, rms=0.121128Jy sigma=0.001053 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.264 mas, bmaj=18.2 mas, bpa=0.2605 degrees ! Estimated noise=1362.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00380194 Jy ! Component: 100 - total flux cleaned = 0.00478196 Jy ! Component: 150 - total flux cleaned = 0.00505015 Jy ! Component: 200 - total flux cleaned = 0.00505042 Jy ! Total flux subtracted in 200 components = 0.00505042 Jy ! Clean residual min=-0.005791 max=0.005127 Jy/beam ! Clean residual mean=0.000003 rms=0.001734 Jy/beam ! Combined flux in latest and established models = 0.280818 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 56 components and 0.280818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120993Jy sigma=0.001054 ! Fit after self-cal, rms=0.120991Jy sigma=0.001054 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.67791e-05 Jy ! Component: 100 - total flux cleaned = -5.66369e-05 Jy ! Component: 150 - total flux cleaned = -4.52128e-05 Jy ! Component: 200 - total flux cleaned = -4.55411e-05 Jy ! Total flux subtracted in 200 components = -4.55411e-05 Jy ! Clean residual min=-0.005784 max=0.005158 Jy/beam ! Clean residual mean=0.000003 rms=0.001732 Jy/beam ! Combined flux in latest and established models = 0.280773 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 58 components and 0.280773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120994Jy sigma=0.001054 ! Fit after self-cal, rms=0.120992Jy sigma=0.001054 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.699 mas, bmaj=6.543 mas, bpa=-2.886 degrees ! Estimated noise=1042.51 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.699 x 6.543 at -2.886 degrees (North through East) ! Clean map min=-0.005102 max=0.25031 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.244 mas, bmaj=5.596 mas, bpa=-2.621 degrees ! Estimated noise=1490.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.195156 Jy ! Component: 100 - total flux cleaned = 0.238647 Jy ! Component: 150 - total flux cleaned = 0.254994 Jy ! Component: 200 - total flux cleaned = 0.26421 Jy ! Total flux subtracted in 200 components = 0.26421 Jy ! Clean residual min=-0.007260 max=0.006657 Jy/beam ! Clean residual mean=-0.000009 rms=0.001756 Jy/beam ! Combined flux in latest and established models = 0.26421 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.26421 Jy ! Inverting map and beam ! Estimated beam: bmin=2.699 mas, bmaj=6.543 mas, bpa=-2.886 degrees ! Estimated noise=1042.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0080209 Jy ! Component: 100 - total flux cleaned = 0.0120444 Jy ! Component: 150 - total flux cleaned = 0.0142505 Jy ! Component: 200 - total flux cleaned = 0.0151077 Jy ! Total flux subtracted in 200 components = 0.0151077 Jy ! Clean residual min=-0.005347 max=0.004542 Jy/beam ! Clean residual mean=-0.000002 rms=0.001258 Jy/beam ! Combined flux in latest and established models = 0.279318 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 38 components and 0.279318 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.264 mas, bmaj=18.2 mas, bpa=0.2605 degrees ! Estimated noise=1362.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000923515 Jy ! Component: 100 - total flux cleaned = 0.000951883 Jy ! Component: 150 - total flux cleaned = 0.000974263 Jy ! Component: 200 - total flux cleaned = 0.000994916 Jy ! Total flux subtracted in 200 components = 0.000994916 Jy ! Clean residual min=-0.005890 max=0.005067 Jy/beam ! Clean residual mean=0.000002 rms=0.001743 Jy/beam ! Combined flux in latest and established models = 0.280313 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.68986e-05 Jy ! Component: 100 - total flux cleaned = 3.10612e-05 Jy ! Component: 150 - total flux cleaned = 4.31811e-05 Jy ! Component: 200 - total flux cleaned = 5.46564e-05 Jy ! Total flux subtracted in 200 components = 5.46564e-05 Jy ! Clean residual min=-0.005934 max=0.005076 Jy/beam ! Clean residual mean=0.000002 rms=0.001740 Jy/beam ! Combined flux in latest and established models = 0.280368 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 42 components and 0.280368 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.699 mas, bmaj=6.543 mas, bpa=-2.886 degrees ! Estimated noise=1042.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000407895 Jy ! Component: 100 - total flux cleaned = -0.000413241 Jy ! Component: 150 - total flux cleaned = -0.000381853 Jy ! Component: 200 - total flux cleaned = -0.000382792 Jy ! Total flux subtracted in 200 components = -0.000382792 Jy ! Clean residual min=-0.005360 max=0.004493 Jy/beam ! Clean residual mean=-0.000001 rms=0.001238 Jy/beam ! Combined flux in latest and established models = 0.279985 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 46 components and 0.279985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121007Jy sigma=0.001054 ! Fit after self-cal, rms=0.121007Jy sigma=0.001054 wmodel J1916-2708_S_2014_01_04_pus_map.mod ! Writing 46 model components to file: J1916-2708_S_2014_01_04_pus_map.mod wobs J1916-2708_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1916-2708_S_2014_01_04_pus_uvs.fits wwins J1916-2708_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J1916-2708_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0021913 Jy ! Component: 100 - total flux cleaned = -0.00360156 Jy ! Component: 150 - total flux cleaned = -0.00443637 Jy ! Component: 200 - total flux cleaned = -0.00500211 Jy ! Component: 250 - total flux cleaned = -0.00559673 Jy ! Component: 300 - total flux cleaned = -0.00578343 Jy ! Component: 350 - total flux cleaned = -0.005902 Jy ! Component: 400 - total flux cleaned = -0.00601429 Jy ! Component: 450 - total flux cleaned = -0.00634314 Jy ! Component: 500 - total flux cleaned = -0.00644848 Jy ! Component: 550 - total flux cleaned = -0.00665562 Jy ! Component: 600 - total flux cleaned = -0.00665578 Jy ! Component: 650 - total flux cleaned = -0.00655954 Jy ! Component: 700 - total flux cleaned = -0.00660716 Jy ! Component: 750 - total flux cleaned = -0.0065145 Jy ! Component: 800 - total flux cleaned = -0.00642379 Jy ! Component: 850 - total flux cleaned = -0.00637939 Jy ! Component: 900 - total flux cleaned = -0.00629284 Jy ! Component: 950 - total flux cleaned = -0.00608199 Jy ! Component: 1000 - total flux cleaned = -0.00599953 Jy ! Component: 1050 - total flux cleaned = -0.00599987 Jy ! Component: 1100 - total flux cleaned = -0.00587968 Jy ! Component: 1150 - total flux cleaned = -0.00572251 Jy ! Component: 1200 - total flux cleaned = -0.00564572 Jy ! Component: 1250 - total flux cleaned = -0.00556976 Jy ! Component: 1300 - total flux cleaned = -0.00545774 Jy ! Component: 1350 - total flux cleaned = -0.00549403 Jy ! Component: 1400 - total flux cleaned = -0.00542215 Jy ! Component: 1450 - total flux cleaned = -0.00531618 Jy ! Component: 1500 - total flux cleaned = -0.00524712 Jy ! Component: 1550 - total flux cleaned = -0.00507752 Jy ! Component: 1600 - total flux cleaned = -0.00514562 Jy ! Component: 1650 - total flux cleaned = -0.00504683 Jy ! Component: 1700 - total flux cleaned = -0.00495036 Jy ! Component: 1750 - total flux cleaned = -0.00488741 Jy ! Component: 1800 - total flux cleaned = -0.00485615 Jy ! Component: 1850 - total flux cleaned = -0.00482521 Jy ! Component: 1900 - total flux cleaned = -0.00482549 Jy ! Component: 1950 - total flux cleaned = -0.00479563 Jy ! Component: 2000 - total flux cleaned = -0.00482527 Jy ! Component: 2050 - total flux cleaned = -0.00485479 Jy ! Component: 2100 - total flux cleaned = -0.00482585 Jy ! Component: 2150 - total flux cleaned = -0.00476881 Jy ! Component: 2200 - total flux cleaned = -0.00482584 Jy ! Component: 2250 - total flux cleaned = -0.00485364 Jy ! Component: 2300 - total flux cleaned = -0.00488075 Jy ! Component: 2350 - total flux cleaned = -0.00479887 Jy ! Component: 2400 - total flux cleaned = -0.00477206 Jy ! Component: 2450 - total flux cleaned = -0.00474546 Jy ! Component: 2500 - total flux cleaned = -0.004719 Jy ! Component: 2550 - total flux cleaned = -0.00466673 Jy ! Component: 2600 - total flux cleaned = -0.00464122 Jy ! Component: 2650 - total flux cleaned = -0.00456455 Jy ! Component: 2700 - total flux cleaned = -0.00461567 Jy ! Component: 2750 - total flux cleaned = -0.00451546 Jy ! Component: 2800 - total flux cleaned = -0.00454036 Jy ! Component: 2850 - total flux cleaned = -0.00446669 Jy ! Component: 2900 - total flux cleaned = -0.00439369 Jy ! Component: 2950 - total flux cleaned = -0.00444199 Jy ! Component: 3000 - total flux cleaned = -0.00432222 Jy ! Component: 3050 - total flux cleaned = -0.00432233 Jy ! Component: 3100 - total flux cleaned = -0.00418139 Jy ! Component: 3150 - total flux cleaned = -0.00415829 Jy ! Component: 3200 - total flux cleaned = -0.00413535 Jy ! Component: 3250 - total flux cleaned = -0.00415863 Jy ! Component: 3300 - total flux cleaned = -0.00418144 Jy ! Component: 3350 - total flux cleaned = -0.00413619 Jy ! Component: 3400 - total flux cleaned = -0.0041587 Jy ! Component: 3450 - total flux cleaned = -0.00415865 Jy ! Component: 3500 - total flux cleaned = -0.00415849 Jy ! Component: 3550 - total flux cleaned = -0.00415835 Jy ! Component: 3600 - total flux cleaned = -0.00413631 Jy ! Component: 3650 - total flux cleaned = -0.00413645 Jy ! Component: 3700 - total flux cleaned = -0.00411486 Jy ! Component: 3750 - total flux cleaned = -0.00409338 Jy ! Component: 3800 - total flux cleaned = -0.00413601 Jy ! Component: 3850 - total flux cleaned = -0.00407202 Jy ! Component: 3900 - total flux cleaned = -0.00402957 Jy ! Component: 3950 - total flux cleaned = -0.00402944 Jy ! Component: 4000 - total flux cleaned = -0.00394564 Jy ! Component: 4050 - total flux cleaned = -0.00392484 Jy ! Total flux subtracted in 4096 components = -0.00390401 Jy ! Clean residual min=-0.001315 max=0.001268 Jy/beam ! Clean residual mean=0.000003 rms=0.000342 Jy/beam ! Combined flux in latest and established models = 0.276081 Jy keep ! Adding 243 model components to the UV plane model. ! The established model now contains 289 components and 0.276081 Jy ![Exited script file: muppet] wmap "J1916-2708_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.699 x 6.543 at -2.886 degrees (North through East) ! Clean map min=-0.0033922 max=0.25244 Jy/beam ! Writing clean map to FITS file: J1916-2708_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.252444 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000329284 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.391315 0.391315 0.78263 1.56526 3.13052 6.26104 12.5221 25.0442 50.0883 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.252 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.699 x 6.543 at -2.886 degrees (North through East) ! Clean map min=-0.0033922 max=0.25244 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1916-2708_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:35:22 2017