! Started logfile: J1914+0124_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:36:23 2016
obs J1914+0124_S_2014_08_05_pus_uva.fits
! Reading UV FITS file: J1914+0124_S_2014_08_05_pus_uva.fits
! AN table 1: 121 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.60551 visibilities/baseline/integration-bin.
! Found source: J1914+0124
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 360 lines of history.
! 
! Reading 13188 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J1914+0124_S_2014_08_05_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 258 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 315 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 315 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 372 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.936643Jy  sigma=0.009888
! Fit after  self-cal, rms=0.918746Jy  sigma=0.009718
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.152 mas, bmaj=11.8 mas, bpa=-1.107 degrees
! Estimated noise=1180.57 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0630759 Jy
! Component: 100  -  total flux cleaned = 0.0791527 Jy
! Total flux subtracted in 100 components = 0.0791527 Jy
! Clean residual min=-0.004027 max=0.006226 Jy/beam
! Clean residual mean=-0.000027 rms=0.001216 Jy/beam
! Combined flux in latest and established models = 0.0791527 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.0791527 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087923Jy  sigma=0.000792
! Fit after  self-cal, rms=0.087902Jy  sigma=0.000792
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.859 mas, bmaj=12.72 mas, bpa=1.758 degrees
! Estimated noise=639.483 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00749705 Jy
! Component: 100  -  total flux cleaned = 0.0107516 Jy
! Component: 150  -  total flux cleaned = 0.0123502 Jy
! Component: 200  -  total flux cleaned = 0.0128676 Jy
! Total flux subtracted in 200 components = 0.0128676 Jy
! Clean residual min=-0.002578 max=0.002646 Jy/beam
! Clean residual mean=-0.000026 rms=0.000700 Jy/beam
! Combined flux in latest and established models = 0.0920203 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 41 components and 0.0920204 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087153Jy  sigma=0.000787
! Fit after  self-cal, rms=0.087134Jy  sigma=0.000787
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.85     HN        1.16     KP        1.10     
!   LA        1.05     MK        1.00*    NL        0.84     OV        1.08     
!   PT        1.03     SC        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.05     HN        1.04     KP        1.07     
!   LA        1.05     MK        1.00*    NL        0.99     OV        1.04     
!   PT        1.01     SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.15     HN        1.05     KP        0.91     
!   LA        0.88     MK        1.00*    NL        1.00     OV        0.92     
!   PT        1.00     SC        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.07     HN        1.00*    KP        0.86     
!   LA        0.79     MK        1.00*    NL        1.11     OV        0.96     
!   PT        0.99     SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.087134Jy  sigma=0.000787
! Fit after  self-cal, rms=0.083536Jy  sigma=0.000779
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.997 mas, bmaj=12.79 mas, bpa=2.368 degrees
! Estimated noise=642.824 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000453888 Jy
! Component: 100  -  total flux cleaned = -0.000581266 Jy
! Component: 150  -  total flux cleaned = -0.00074092 Jy
! Component: 200  -  total flux cleaned = -0.000895345 Jy
! Total flux subtracted in 200 components = -0.000895345 Jy
! Clean residual min=-0.002372 max=0.002123 Jy/beam
! Clean residual mean=-0.000009 rms=0.000596 Jy/beam
! Combined flux in latest and established models = 0.091125 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 53 components and 0.091125 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083520Jy  sigma=0.000779
! Fit after  self-cal, rms=0.083459Jy  sigma=0.000779
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083459Jy  sigma=0.000779
! Fit after  self-cal, rms=0.083824Jy  sigma=0.000776
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.97 mas, bmaj=12.81 mas, bpa=2.218 degrees
! Estimated noise=640.917 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000121208 Jy
! Component: 100  -  total flux cleaned = 0.000106997 Jy
! Component: 150  -  total flux cleaned = 7.40033e-05 Jy
! Component: 200  -  total flux cleaned = 3.64733e-05 Jy
! Total flux subtracted in 200 components = 3.64733e-05 Jy
! Clean residual min=-0.001701 max=0.001621 Jy/beam
! Clean residual mean=-0.000011 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.0911615 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 69 components and 0.0911615 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083818Jy  sigma=0.000776
! Fit after  self-cal, rms=0.083840Jy  sigma=0.000776
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.37991e-05 Jy
! Component: 100  -  total flux cleaned = -9.93733e-05 Jy
! Component: 150  -  total flux cleaned = -0.000128021 Jy
! Component: 200  -  total flux cleaned = -0.000141234 Jy
! Total flux subtracted in 200 components = -0.000141234 Jy
! Clean residual min=-0.001719 max=0.001659 Jy/beam
! Clean residual mean=-0.000012 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.0910203 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 78 components and 0.0910203 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083838Jy  sigma=0.000776
! Fit after  self-cal, rms=0.083838Jy  sigma=0.000776
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083838Jy  sigma=0.000776
! Fit after  self-cal, rms=0.084058Jy  sigma=0.000776
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.946 mas, bmaj=12.81 mas, bpa=2.085 degrees
! Estimated noise=640.947 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.96663e-05 Jy
! Component: 100  -  total flux cleaned = 3.98532e-05 Jy
! Component: 150  -  total flux cleaned = 6.47257e-06 Jy
! Component: 200  -  total flux cleaned = -2.2319e-05 Jy
! Total flux subtracted in 200 components = -2.2319e-05 Jy
! Clean residual min=-0.001714 max=0.001599 Jy/beam
! Clean residual mean=-0.000012 rms=0.000462 Jy/beam
! Combined flux in latest and established models = 0.0909979 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 82 components and 0.0909979 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084055Jy  sigma=0.000776
! Fit after  self-cal, rms=0.084058Jy  sigma=0.000776
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.37665e-05 Jy
! Component: 100  -  total flux cleaned = -5.26362e-05 Jy
! Component: 150  -  total flux cleaned = -5.84729e-05 Jy
! Component: 200  -  total flux cleaned = -6.41444e-05 Jy
! Total flux subtracted in 200 components = -6.41444e-05 Jy
! Clean residual min=-0.001705 max=0.001601 Jy/beam
! Clean residual mean=-0.000012 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.0909338 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 89 components and 0.0909338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084056Jy  sigma=0.000776
! Fit after  self-cal, rms=0.084056Jy  sigma=0.000776
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084056Jy  sigma=0.000776
! Fit after  self-cal, rms=0.084174Jy  sigma=0.000776
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.601 mas, bmaj=14.39 mas, bpa=13.92 degrees
! Estimated noise=672.484 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.37623e-06 Jy
! Component: 100  -  total flux cleaned = -2.25042e-05 Jy
! Component: 150  -  total flux cleaned = -5.55472e-05 Jy
! Component: 200  -  total flux cleaned = -7.82717e-05 Jy
! Total flux subtracted in 200 components = -7.82717e-05 Jy
! Clean residual min=-0.001707 max=0.001650 Jy/beam
! Clean residual mean=-0.000016 rms=0.000499 Jy/beam
! Combined flux in latest and established models = 0.0908555 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 102 components and 0.0908555 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084172Jy  sigma=0.000776
! Fit after  self-cal, rms=0.084173Jy  sigma=0.000776
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.75273e-05 Jy
! Component: 100  -  total flux cleaned = -5.6951e-05 Jy
! Component: 150  -  total flux cleaned = -8.07091e-05 Jy
! Component: 200  -  total flux cleaned = -9.7407e-05 Jy
! Total flux subtracted in 200 components = -9.7407e-05 Jy
! Clean residual min=-0.001692 max=0.001648 Jy/beam
! Clean residual mean=-0.000016 rms=0.000498 Jy/beam
! Combined flux in latest and established models = 0.0907581 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 110 components and 0.0907581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084172Jy  sigma=0.000776
! Fit after  self-cal, rms=0.084171Jy  sigma=0.000776
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=6.928 mas, bmaj=12.81 mas, bpa=1.974 degrees
! Estimated noise=641 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.928 x 12.81 at 1.974 degrees (North through East)
! Clean map  min=-0.0016665  max=0.083393 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.199 mas, bmaj=11.87 mas, bpa=-0.9472 degrees
! Estimated noise=1206.21 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0642231 Jy
! Component: 100  -  total flux cleaned = 0.0807336 Jy
! Component: 150  -  total flux cleaned = 0.0873716 Jy
! Component: 200  -  total flux cleaned = 0.0904262 Jy
! Total flux subtracted in 200 components = 0.0904262 Jy
! Clean residual min=-0.002601 max=0.002452 Jy/beam
! Clean residual mean=-0.000006 rms=0.000704 Jy/beam
! Combined flux in latest and established models = 0.0904263 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 31 model components to the UV plane model.
! The established model now contains 31 components and 0.0904263 Jy
! Inverting map and beam 
! Estimated beam: bmin=6.928 mas, bmaj=12.81 mas, bpa=1.974 degrees
! Estimated noise=641 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000960453 Jy
! Component: 100  -  total flux cleaned = 0.000966448 Jy
! Component: 150  -  total flux cleaned = 0.00090654 Jy
! Component: 200  -  total flux cleaned = 0.000858571 Jy
! Total flux subtracted in 200 components = 0.000858571 Jy
! Clean residual min=-0.001858 max=0.001607 Jy/beam
! Clean residual mean=-0.000011 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.0912848 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 53 components and 0.0912848 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.601 mas, bmaj=14.39 mas, bpa=13.92 degrees
! Estimated noise=672.484 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.58715e-05 Jy
! Component: 100  -  total flux cleaned = -0.000126202 Jy
! Component: 150  -  total flux cleaned = -0.000187099 Jy
! Component: 200  -  total flux cleaned = -0.00024006 Jy
! Total flux subtracted in 200 components = -0.00024006 Jy
! Clean residual min=-0.001806 max=0.001675 Jy/beam
! Clean residual mean=-0.000015 rms=0.000503 Jy/beam
! Combined flux in latest and established models = 0.0910448 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.61755e-05 Jy
! Component: 100  -  total flux cleaned = -7.70963e-05 Jy
! Component: 150  -  total flux cleaned = -0.000104718 Jy
! Component: 200  -  total flux cleaned = -0.000113334 Jy
! Total flux subtracted in 200 components = -0.000113334 Jy
! Clean residual min=-0.001739 max=0.001682 Jy/beam
! Clean residual mean=-0.000015 rms=0.000499 Jy/beam
! Combined flux in latest and established models = 0.0909314 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 78 components and 0.0909314 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=6.928 mas, bmaj=12.81 mas, bpa=1.974 degrees
! Estimated noise=641 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.69767e-05 Jy
! Component: 100  -  total flux cleaned = 3.53376e-05 Jy
! Component: 150  -  total flux cleaned = 2.59395e-05 Jy
! Component: 200  -  total flux cleaned = 2.58184e-05 Jy
! Total flux subtracted in 200 components = 2.58184e-05 Jy
! Clean residual min=-0.001703 max=0.001612 Jy/beam
! Clean residual mean=-0.000012 rms=0.000460 Jy/beam
! Combined flux in latest and established models = 0.0909572 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 94 components and 0.0909572 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084174Jy  sigma=0.000776
! Fit after  self-cal, rms=0.084176Jy  sigma=0.000776
wmodel J1914+0124_S_2014_08_05_pus_map.mod
! Writing 94 model components to file: J1914+0124_S_2014_08_05_pus_map.mod
wobs J1914+0124_S_2014_08_05_pus_uvs.fits
! Writing UV FITS file: J1914+0124_S_2014_08_05_pus_uvs.fits
wwins J1914+0124_S_2014_08_05_pus_map.win
! wwins: Wrote 1 windows to J1914+0124_S_2014_08_05_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 1.7717e-05 Jy
! Component: 100  -  total flux cleaned = 7.11415e-05 Jy
! Component: 150  -  total flux cleaned = 0.000169358 Jy
! Component: 200  -  total flux cleaned = 0.000379414 Jy
! Component: 250  -  total flux cleaned = 0.000558125 Jy
! Component: 300  -  total flux cleaned = 0.000708777 Jy
! Component: 350  -  total flux cleaned = 0.000833411 Jy
! Component: 400  -  total flux cleaned = 0.000873239 Jy
! Component: 450  -  total flux cleaned = 0.000932316 Jy
! Component: 500  -  total flux cleaned = 0.00108367 Jy
! Component: 550  -  total flux cleaned = 0.00117573 Jy
! Component: 600  -  total flux cleaned = 0.00126463 Jy
! Component: 650  -  total flux cleaned = 0.00126446 Jy
! Component: 700  -  total flux cleaned = 0.0012814 Jy
! Component: 750  -  total flux cleaned = 0.00134821 Jy
! Component: 800  -  total flux cleaned = 0.0014618 Jy
! Component: 850  -  total flux cleaned = 0.00158899 Jy
! Component: 900  -  total flux cleaned = 0.00163567 Jy
! Component: 950  -  total flux cleaned = 0.00178786 Jy
! Component: 1000  -  total flux cleaned = 0.00181774 Jy
! Component: 1050  -  total flux cleaned = 0.00199345 Jy
! Component: 1100  -  total flux cleaned = 0.0021085 Jy
! Component: 1150  -  total flux cleaned = 0.00223585 Jy
! Component: 1200  -  total flux cleaned = 0.00236106 Jy
! Component: 1250  -  total flux cleaned = 0.00240236 Jy
! Component: 1300  -  total flux cleaned = 0.00251029 Jy
! Component: 1350  -  total flux cleaned = 0.00259029 Jy
! Component: 1400  -  total flux cleaned = 0.00264242 Jy
! Component: 1450  -  total flux cleaned = 0.00275825 Jy
! Component: 1500  -  total flux cleaned = 0.00279619 Jy
! Component: 1550  -  total flux cleaned = 0.00289615 Jy
! Component: 1600  -  total flux cleaned = 0.00295735 Jy
! Component: 1650  -  total flux cleaned = 0.00294516 Jy
! Component: 1700  -  total flux cleaned = 0.00298115 Jy
! Component: 1750  -  total flux cleaned = 0.00305211 Jy
! Component: 1800  -  total flux cleaned = 0.00308729 Jy
! Component: 1850  -  total flux cleaned = 0.00311047 Jy
! Component: 1900  -  total flux cleaned = 0.00317852 Jy
! Component: 1950  -  total flux cleaned = 0.00323463 Jy
! Component: 2000  -  total flux cleaned = 0.00327894 Jy
! Component: 2050  -  total flux cleaned = 0.00330083 Jy
! Component: 2100  -  total flux cleaned = 0.00336586 Jy
! Component: 2150  -  total flux cleaned = 0.00340883 Jy
! Component: 2200  -  total flux cleaned = 0.00344063 Jy
! Component: 2250  -  total flux cleaned = 0.00350356 Jy
! Component: 2300  -  total flux cleaned = 0.00352432 Jy
! Component: 2350  -  total flux cleaned = 0.00358597 Jy
! Component: 2400  -  total flux cleaned = 0.00362661 Jy
! Component: 2450  -  total flux cleaned = 0.00364671 Jy
! Component: 2500  -  total flux cleaned = 0.00367665 Jy
! Component: 2550  -  total flux cleaned = 0.00371625 Jy
! Component: 2600  -  total flux cleaned = 0.00374562 Jy
! Component: 2650  -  total flux cleaned = 0.00378456 Jy
! Component: 2700  -  total flux cleaned = 0.00379419 Jy
! Component: 2750  -  total flux cleaned = 0.00385131 Jy
! Component: 2800  -  total flux cleaned = 0.00387022 Jy
! Component: 2850  -  total flux cleaned = 0.00392635 Jy
! Component: 2900  -  total flux cleaned = 0.00393565 Jy
! Component: 2950  -  total flux cleaned = 0.00396326 Jy
! Component: 3000  -  total flux cleaned = 0.00398148 Jy
! Component: 3050  -  total flux cleaned = 0.00401755 Jy
! Component: 3100  -  total flux cleaned = 0.0040085 Jy
! Component: 3150  -  total flux cleaned = 0.00405295 Jy
! Component: 3200  -  total flux cleaned = 0.00407053 Jy
! Component: 3250  -  total flux cleaned = 0.0040792 Jy
! Component: 3300  -  total flux cleaned = 0.00409649 Jy
! Component: 3350  -  total flux cleaned = 0.0040879 Jy
! Component: 3400  -  total flux cleaned = 0.00412205 Jy
! Component: 3450  -  total flux cleaned = 0.004088 Jy
! Component: 3500  -  total flux cleaned = 0.00409649 Jy
! Component: 3550  -  total flux cleaned = 0.00412157 Jy
! Component: 3600  -  total flux cleaned = 0.00412157 Jy
! Component: 3650  -  total flux cleaned = 0.00413801 Jy
! Component: 3700  -  total flux cleaned = 0.00413807 Jy
! Component: 3750  -  total flux cleaned = 0.00415441 Jy
! Component: 3800  -  total flux cleaned = 0.00413004 Jy
! Component: 3850  -  total flux cleaned = 0.00413812 Jy
! Component: 3900  -  total flux cleaned = 0.00414609 Jy
! Component: 3950  -  total flux cleaned = 0.00413813 Jy
! Component: 4000  -  total flux cleaned = 0.00412232 Jy
! Component: 4050  -  total flux cleaned = 0.00413808 Jy
! Total flux subtracted in 4096 components = 0.00413807 Jy
! Clean residual min=-0.000469 max=0.000471 Jy/beam
! Clean residual mean=0.000000 rms=0.000155 Jy/beam
! Combined flux in latest and established models = 0.0950953 Jy
keep
! Adding 270 model components to the UV plane model.
! The established model now contains 364 components and 0.0950953 Jy
![Exited script file: muppet]
wmap "J1914+0124_S_2014_08_05_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.928 x 12.81 at 1.974 degrees (North through East)
! Clean map  min=-0.0011619  max=0.083249 Jy/beam
! Writing clean map to FITS file: J1914+0124_S_2014_08_05_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0832485 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000149724 
device "J1914+0124_S_2014_08_05_pus\_map.eps/VPS"
! Attempting to open device: 'J1914+0124_S_2014_08_05_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.539555 0.539555 1.07911 2.15822 4.31644 8.63288 17.2658 34.5315 69.063
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0004 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.083 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.928 x 12.81 at 1.974 degrees (North through East)
! Clean map  min=-0.0011619  max=0.083249 Jy/beam
quit
! Quitting program
! Log file J1914+0124_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:36:28 2016