! Started logfile: J1912-0804_S_2014_06_09_pus_uvs.log on Wed Nov 16 20:02:09 2016 obs J1912-0804_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J1912-0804_S_2014_06_09_pus_uva.fits ! AN table 1: 93 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.69319 visibilities/baseline/integration-bin. ! Found source: J1912-0804 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 11604 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1912-0804_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 155 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 155 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 155 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 155 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.974816Jy sigma=0.010651 ! Fit after self-cal, rms=0.943269Jy sigma=0.010365 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.697 mas, bmaj=7.197 mas, bpa=0.7442 degrees ! Estimated noise=779.691 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0443552 Jy ! Component: 100 - total flux cleaned = 0.0549286 Jy ! Total flux subtracted in 100 components = 0.0549286 Jy ! Clean residual min=-0.003592 max=0.004714 Jy/beam ! Clean residual mean=0.000001 rms=0.000965 Jy/beam ! Combined flux in latest and established models = 0.0549286 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0549286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076416Jy sigma=0.000781 ! Fit after self-cal, rms=0.076173Jy sigma=0.000779 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.368 mas, bmaj=8.64 mas, bpa=0.1332 degrees ! Estimated noise=607.677 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00753621 Jy ! Component: 100 - total flux cleaned = 0.0118722 Jy ! Component: 150 - total flux cleaned = 0.0146056 Jy ! Component: 200 - total flux cleaned = 0.0164343 Jy ! Total flux subtracted in 200 components = 0.0164343 Jy ! Clean residual min=-0.002387 max=0.002460 Jy/beam ! Clean residual mean=0.000002 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.0713629 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 62 components and 0.0713629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075401Jy sigma=0.000770 ! Fit after self-cal, rms=0.075368Jy sigma=0.000769 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.89 HN 1.02 KP 0.99 ! LA 1.18 MK 1.00 NL 0.96 OV 1.08 ! PT 0.98 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.11 KP 1.03 ! LA 1.07 MK 1.06 NL 1.01 OV 1.02 ! PT 0.93 SC 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 1.03 KP 0.91 ! LA 0.88 MK 0.98 NL 1.00 OV 0.95 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.95 KP 0.86 ! LA 0.85 MK 1.12 NL 0.99 OV 1.05 ! PT 0.97 SC 1.04 ! ! ! Fit before self-cal, rms=0.075368Jy sigma=0.000769 ! Fit after self-cal, rms=0.074273Jy sigma=0.000766 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.418 mas, bmaj=8.753 mas, bpa=0.267 degrees ! Estimated noise=601.371 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141914 Jy ! Component: 100 - total flux cleaned = 0.00169568 Jy ! Component: 150 - total flux cleaned = 0.00167341 Jy ! Component: 200 - total flux cleaned = 0.00167338 Jy ! Total flux subtracted in 200 components = 0.00167338 Jy ! Clean residual min=-0.002019 max=0.001985 Jy/beam ! Clean residual mean=0.000001 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.0730363 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 79 components and 0.0730363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074245Jy sigma=0.000765 ! Fit after self-cal, rms=0.074277Jy sigma=0.000765 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074277Jy sigma=0.000765 ! Fit after self-cal, rms=0.073877Jy sigma=0.000764 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.419 mas, bmaj=8.738 mas, bpa=0.2824 degrees ! Estimated noise=599.583 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000705894 Jy ! Component: 100 - total flux cleaned = 0.000708361 Jy ! Component: 150 - total flux cleaned = 0.000709703 Jy ! Component: 200 - total flux cleaned = 0.000724667 Jy ! Total flux subtracted in 200 components = 0.000724667 Jy ! Clean residual min=-0.001896 max=0.001837 Jy/beam ! Clean residual mean=0.000002 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.073761 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 89 components and 0.0737609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073865Jy sigma=0.000764 ! Fit after self-cal, rms=0.073869Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00018978 Jy ! Component: 100 - total flux cleaned = 0.000161468 Jy ! Component: 150 - total flux cleaned = 0.000161144 Jy ! Component: 200 - total flux cleaned = 0.000160598 Jy ! Total flux subtracted in 200 components = 0.000160598 Jy ! Clean residual min=-0.001900 max=0.001847 Jy/beam ! Clean residual mean=0.000002 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.0739215 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 95 components and 0.0739215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073864Jy sigma=0.000764 ! Fit after self-cal, rms=0.073863Jy sigma=0.000764 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073863Jy sigma=0.000764 ! Fit after self-cal, rms=0.073447Jy sigma=0.000764 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.413 mas, bmaj=8.716 mas, bpa=0.2573 degrees ! Estimated noise=597.241 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000341458 Jy ! Component: 100 - total flux cleaned = 0.000385481 Jy ! Component: 150 - total flux cleaned = 0.000385392 Jy ! Component: 200 - total flux cleaned = 0.000407121 Jy ! Total flux subtracted in 200 components = 0.000407121 Jy ! Clean residual min=-0.001843 max=0.001832 Jy/beam ! Clean residual mean=0.000002 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.0743287 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 102 components and 0.0743287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073442Jy sigma=0.000764 ! Fit after self-cal, rms=0.073437Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.92812e-05 Jy ! Component: 100 - total flux cleaned = 8.98656e-05 Jy ! Component: 150 - total flux cleaned = 9.92179e-05 Jy ! Component: 200 - total flux cleaned = 9.90643e-05 Jy ! Total flux subtracted in 200 components = 9.90643e-05 Jy ! Clean residual min=-0.001849 max=0.001840 Jy/beam ! Clean residual mean=0.000002 rms=0.000465 Jy/beam ! Combined flux in latest and established models = 0.0744277 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 104 components and 0.0744277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073434Jy sigma=0.000764 ! Fit after self-cal, rms=0.073433Jy sigma=0.000764 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073433Jy sigma=0.000764 ! Fit after self-cal, rms=0.073128Jy sigma=0.000764 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.48 mas, bmaj=17.39 mas, bpa=-4.861 degrees ! Estimated noise=707.939 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000342843 Jy ! Component: 100 - total flux cleaned = 0.000337729 Jy ! Component: 150 - total flux cleaned = 0.000321437 Jy ! Component: 200 - total flux cleaned = 0.000316618 Jy ! Total flux subtracted in 200 components = 0.000316618 Jy ! Clean residual min=-0.001901 max=0.002035 Jy/beam ! Clean residual mean=0.000003 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.0747443 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 115 components and 0.0747443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073126Jy sigma=0.000764 ! Fit after self-cal, rms=0.073123Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.56104e-05 Jy ! Component: 100 - total flux cleaned = 5.06863e-05 Jy ! Component: 150 - total flux cleaned = 3.34502e-05 Jy ! Component: 200 - total flux cleaned = 2.54652e-05 Jy ! Total flux subtracted in 200 components = 2.54652e-05 Jy ! Clean residual min=-0.001902 max=0.002051 Jy/beam ! Clean residual mean=0.000003 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.0747698 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 121 components and 0.0747698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073123Jy sigma=0.000764 ! Fit after self-cal, rms=0.073123Jy sigma=0.000764 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.41 mas, bmaj=8.701 mas, bpa=0.2519 degrees ! Estimated noise=595.54 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.41 x 8.701 at 0.2519 degrees (North through East) ! Clean map min=-0.0017551 max=0.057937 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.733 mas, bmaj=7.228 mas, bpa=0.8317 degrees ! Estimated noise=763.475 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0433999 Jy ! Component: 100 - total flux cleaned = 0.0539655 Jy ! Component: 150 - total flux cleaned = 0.0597029 Jy ! Component: 200 - total flux cleaned = 0.0636453 Jy ! Total flux subtracted in 200 components = 0.0636453 Jy ! Clean residual min=-0.003140 max=0.002738 Jy/beam ! Clean residual mean=-0.000000 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.0636453 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.0636453 Jy ! Inverting map and beam ! Estimated beam: bmin=3.41 mas, bmaj=8.701 mas, bpa=0.2519 degrees ! Estimated noise=595.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00432936 Jy ! Component: 100 - total flux cleaned = 0.00699262 Jy ! Component: 150 - total flux cleaned = 0.008714 Jy ! Component: 200 - total flux cleaned = 0.00985261 Jy ! Total flux subtracted in 200 components = 0.00985261 Jy ! Clean residual min=-0.001927 max=0.001834 Jy/beam ! Clean residual mean=0.000002 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.073498 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 69 components and 0.0734979 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.48 mas, bmaj=17.39 mas, bpa=-4.861 degrees ! Estimated noise=707.939 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102131 Jy ! Component: 100 - total flux cleaned = 0.00130609 Jy ! Component: 150 - total flux cleaned = 0.00128798 Jy ! Component: 200 - total flux cleaned = 0.00127053 Jy ! Total flux subtracted in 200 components = 0.00127053 Jy ! Clean residual min=-0.002045 max=0.002048 Jy/beam ! Clean residual mean=0.000003 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.0747685 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.07143e-05 Jy ! Component: 100 - total flux cleaned = -4.47263e-05 Jy ! Component: 150 - total flux cleaned = -5.7628e-05 Jy ! Component: 200 - total flux cleaned = -7.01875e-05 Jy ! Total flux subtracted in 200 components = -7.01875e-05 Jy ! Clean residual min=-0.002010 max=0.002047 Jy/beam ! Clean residual mean=0.000003 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.0746983 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 105 components and 0.0746983 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.41 mas, bmaj=8.701 mas, bpa=0.2519 degrees ! Estimated noise=595.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.36451e-05 Jy ! Component: 100 - total flux cleaned = -6.36856e-05 Jy ! Component: 150 - total flux cleaned = -6.40089e-05 Jy ! Component: 200 - total flux cleaned = -6.36309e-05 Jy ! Total flux subtracted in 200 components = -6.36309e-05 Jy ! Clean residual min=-0.001842 max=0.001835 Jy/beam ! Clean residual mean=0.000001 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.0746347 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 118 components and 0.0746346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073131Jy sigma=0.000764 ! Fit after self-cal, rms=0.073137Jy sigma=0.000764 wmodel J1912-0804_S_2014_06_09_pus_map.mod ! Writing 118 model components to file: J1912-0804_S_2014_06_09_pus_map.mod wobs J1912-0804_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J1912-0804_S_2014_06_09_pus_uvs.fits wwins J1912-0804_S_2014_06_09_pus_map.win ! wwins: Wrote 2 windows to J1912-0804_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000306048 Jy ! Component: 100 - total flux cleaned = -0.000276469 Jy ! Component: 150 - total flux cleaned = -0.000218159 Jy ! Component: 200 - total flux cleaned = -0.000189629 Jy ! Component: 250 - total flux cleaned = -0.000189505 Jy ! Component: 300 - total flux cleaned = -0.000189006 Jy ! Component: 350 - total flux cleaned = -0.000238484 Jy ! Component: 400 - total flux cleaned = -0.000310904 Jy ! Component: 450 - total flux cleaned = -0.00045081 Jy ! Component: 500 - total flux cleaned = -0.000563306 Jy ! Component: 550 - total flux cleaned = -0.000694594 Jy ! Component: 600 - total flux cleaned = -0.000801846 Jy ! Component: 650 - total flux cleaned = -0.000948425 Jy ! Component: 700 - total flux cleaned = -0.00105059 Jy ! Component: 750 - total flux cleaned = -0.00123 Jy ! Component: 800 - total flux cleaned = -0.00130827 Jy ! Component: 850 - total flux cleaned = -0.00142286 Jy ! Component: 900 - total flux cleaned = -0.00153563 Jy ! Component: 950 - total flux cleaned = -0.00164599 Jy ! Component: 1000 - total flux cleaned = -0.00173572 Jy ! Component: 1050 - total flux cleaned = -0.00182373 Jy ! Component: 1100 - total flux cleaned = -0.00185807 Jy ! Component: 1150 - total flux cleaned = -0.00189213 Jy ! Component: 1200 - total flux cleaned = -0.00199216 Jy ! Component: 1250 - total flux cleaned = -0.00209015 Jy ! Component: 1300 - total flux cleaned = -0.00213829 Jy ! Component: 1350 - total flux cleaned = -0.00221796 Jy ! Component: 1400 - total flux cleaned = -0.00229668 Jy ! Component: 1450 - total flux cleaned = -0.00238961 Jy ! Component: 1500 - total flux cleaned = -0.00248086 Jy ! Component: 1550 - total flux cleaned = -0.00246547 Jy ! Component: 1600 - total flux cleaned = -0.00252481 Jy ! Component: 1650 - total flux cleaned = -0.0025834 Jy ! Component: 1700 - total flux cleaned = -0.0026122 Jy ! Component: 1750 - total flux cleaned = -0.00255488 Jy ! Component: 1800 - total flux cleaned = -0.0026254 Jy ! Component: 1850 - total flux cleaned = -0.00263936 Jy ! Component: 1900 - total flux cleaned = -0.00259771 Jy ! Component: 1950 - total flux cleaned = -0.00259796 Jy ! Component: 2000 - total flux cleaned = -0.00263798 Jy ! Component: 2050 - total flux cleaned = -0.00258473 Jy ! Component: 2100 - total flux cleaned = -0.00263722 Jy ! Component: 2150 - total flux cleaned = -0.00263711 Jy ! Component: 2200 - total flux cleaned = -0.00262403 Jy ! Component: 2250 - total flux cleaned = -0.00259872 Jy ! Component: 2300 - total flux cleaned = -0.0026741 Jy ! Component: 2350 - total flux cleaned = -0.00261167 Jy ! Component: 2400 - total flux cleaned = -0.00259944 Jy ! Component: 2450 - total flux cleaned = -0.00259922 Jy ! Component: 2500 - total flux cleaned = -0.00257498 Jy ! Component: 2550 - total flux cleaned = -0.00262271 Jy ! Component: 2600 - total flux cleaned = -0.00261092 Jy ! Component: 2650 - total flux cleaned = -0.00265751 Jy ! Component: 2700 - total flux cleaned = -0.00262286 Jy ! Component: 2750 - total flux cleaned = -0.00264583 Jy ! Component: 2800 - total flux cleaned = -0.00262327 Jy ! Component: 2850 - total flux cleaned = -0.00261206 Jy ! Component: 2900 - total flux cleaned = -0.00261205 Jy ! Component: 2950 - total flux cleaned = -0.00260115 Jy ! Component: 3000 - total flux cleaned = -0.00257939 Jy ! Component: 3050 - total flux cleaned = -0.00255774 Jy ! Component: 3100 - total flux cleaned = -0.00251505 Jy ! Component: 3150 - total flux cleaned = -0.00254686 Jy ! Component: 3200 - total flux cleaned = -0.00253616 Jy ! Component: 3250 - total flux cleaned = -0.00251506 Jy ! Component: 3300 - total flux cleaned = -0.00249441 Jy ! Component: 3350 - total flux cleaned = -0.00245335 Jy ! Component: 3400 - total flux cleaned = -0.00251441 Jy ! Component: 3450 - total flux cleaned = -0.00249416 Jy ! Component: 3500 - total flux cleaned = -0.00246422 Jy ! Component: 3550 - total flux cleaned = -0.00246436 Jy ! Component: 3600 - total flux cleaned = -0.0024546 Jy ! Component: 3650 - total flux cleaned = -0.00248382 Jy ! Component: 3700 - total flux cleaned = -0.00247422 Jy ! Component: 3750 - total flux cleaned = -0.00251268 Jy ! Component: 3800 - total flux cleaned = -0.00249366 Jy ! Component: 3850 - total flux cleaned = -0.0025033 Jy ! Component: 3900 - total flux cleaned = -0.00251283 Jy ! Component: 3950 - total flux cleaned = -0.00256861 Jy ! Component: 4000 - total flux cleaned = -0.00260548 Jy ! Component: 4050 - total flux cleaned = -0.00260548 Jy ! Total flux subtracted in 4096 components = -0.00265102 Jy ! Clean residual min=-0.000544 max=0.000660 Jy/beam ! Clean residual mean=0.000001 rms=0.000170 Jy/beam ! Combined flux in latest and established models = 0.0719836 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 391 components and 0.0719836 Jy ![Exited script file: muppet] wmap "J1912-0804_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.41 x 8.701 at 0.2519 degrees (North through East) ! Clean map min=-0.0013516 max=0.057314 Jy/beam ! Writing clean map to FITS file: J1912-0804_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0573142 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000171138 device "J1912-0804_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1912-0804_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.89579 0.89579 1.79158 3.58316 7.16632 14.3326 28.6653 57.3306 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.057 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.41 x 8.701 at 0.2519 degrees (North through East) ! Clean map min=-0.0013516 max=0.057314 Jy/beam quit ! Quitting program ! Log file J1912-0804_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 20:02:13 2016