! Started logfile: J1911-2102_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:35:08 2017 obs J1911-2102_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1911-2102_S_2014_01_04_pus_uva.fits ! AN table 1: 85 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.50098 visibilities/baseline/integration-bin. ! Found source: J1911-2102 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 6132 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1911-2102_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 212 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 254 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 296 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 254 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.016114Jy sigma=0.007393 ! Fit after self-cal, rms=0.783376Jy sigma=0.005709 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.366 mas, bmaj=5.801 mas, bpa=-3.657 degrees ! Estimated noise=1945.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.166057 Jy ! Component: 100 - total flux cleaned = 0.213133 Jy ! Total flux subtracted in 100 components = 0.213133 Jy ! Clean residual min=-0.024509 max=0.032060 Jy/beam ! Clean residual mean=-0.000140 rms=0.006860 Jy/beam ! Combined flux in latest and established models = 0.213133 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.213133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203130Jy sigma=0.001356 ! Fit after self-cal, rms=0.203033Jy sigma=0.001354 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.938 mas, bmaj=6.98 mas, bpa=-5.357 degrees ! Estimated noise=1401.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0473923 Jy ! Component: 100 - total flux cleaned = 0.0727602 Jy ! Component: 150 - total flux cleaned = 0.0873007 Jy ! Component: 200 - total flux cleaned = 0.0956955 Jy ! Total flux subtracted in 200 components = 0.0956955 Jy ! Clean residual min=-0.022693 max=0.039903 Jy/beam ! Clean residual mean=-0.000117 rms=0.008087 Jy/beam ! Combined flux in latest and established models = 0.308829 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 24 components and 0.308829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190494Jy sigma=0.001287 ! Fit after self-cal, rms=0.190636Jy sigma=0.001286 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.00* KP 1.00* LA 0.86 ! MK 1.04 NL 1.09 OV 0.95 PT 0.83 ! SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.50 FD 1.00* KP 1.00* LA 0.89 ! MK 1.03 NL 1.15 OV 0.94 PT 0.85 ! SC 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.28 FD 1.00* KP 1.00* LA 0.70 ! MK 1.06 NL 1.12 OV 0.87 PT 0.79 ! SC 0.89 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.00* KP 1.00* LA 0.82 ! MK 0.97 NL 1.22 OV 0.92 PT 0.90 ! SC 0.79 ! ! ! Fit before self-cal, rms=0.190636Jy sigma=0.001286 ! Fit after self-cal, rms=0.180570Jy sigma=0.001215 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.925 mas, bmaj=7.073 mas, bpa=-4.198 degrees ! Estimated noise=1398.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.5, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0285239 Jy ! Component: 100 - total flux cleaned = 0.038877 Jy ! Component: 150 - total flux cleaned = 0.0440851 Jy ! Component: 200 - total flux cleaned = 0.0458109 Jy ! Total flux subtracted in 200 components = 0.0458109 Jy ! Clean residual min=-0.011130 max=0.012849 Jy/beam ! Clean residual mean=0.000002 rms=0.003180 Jy/beam ! Combined flux in latest and established models = 0.35464 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 50 components and 0.35464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176186Jy sigma=0.001185 ! Fit after self-cal, rms=0.174754Jy sigma=0.001176 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.174754Jy sigma=0.001176 ! Fit after self-cal, rms=0.169208Jy sigma=0.001171 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.888 mas, bmaj=7.012 mas, bpa=-4.039 degrees ! Estimated noise=1371.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00930001 Jy ! Component: 100 - total flux cleaned = 0.0129568 Jy ! Component: 150 - total flux cleaned = 0.013361 Jy ! Component: 200 - total flux cleaned = 0.0133614 Jy ! Total flux subtracted in 200 components = 0.0133614 Jy ! Clean residual min=-0.009293 max=0.007834 Jy/beam ! Clean residual mean=0.000008 rms=0.002179 Jy/beam ! Combined flux in latest and established models = 0.368001 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 63 components and 0.368001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168644Jy sigma=0.001168 ! Fit after self-cal, rms=0.168502Jy sigma=0.001167 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00349415 Jy ! Component: 100 - total flux cleaned = 0.00329335 Jy ! Component: 150 - total flux cleaned = 0.00310337 Jy ! Component: 200 - total flux cleaned = 0.00301843 Jy ! Total flux subtracted in 200 components = 0.00301843 Jy ! Clean residual min=-0.008902 max=0.006902 Jy/beam ! Clean residual mean=0.000009 rms=0.002070 Jy/beam ! Combined flux in latest and established models = 0.371019 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 72 components and 0.371019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168323Jy sigma=0.001166 ! Fit after self-cal, rms=0.168293Jy sigma=0.001166 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168293Jy sigma=0.001166 ! Fit after self-cal, rms=0.165676Jy sigma=0.001162 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.885 mas, bmaj=7.002 mas, bpa=-4.056 degrees ! Estimated noise=1365.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195244 Jy ! Component: 100 - total flux cleaned = 0.0020687 Jy ! Component: 150 - total flux cleaned = 0.00206079 Jy ! Component: 200 - total flux cleaned = 0.0017436 Jy ! Total flux subtracted in 200 components = 0.0017436 Jy ! Clean residual min=-0.006159 max=0.005681 Jy/beam ! Clean residual mean=0.000009 rms=0.001489 Jy/beam ! Combined flux in latest and established models = 0.372763 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 83 components and 0.372763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165505Jy sigma=0.001161 ! Fit after self-cal, rms=0.165658Jy sigma=0.001160 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158602 Jy ! Component: 100 - total flux cleaned = 0.00121602 Jy ! Component: 150 - total flux cleaned = 0.000962803 Jy ! Component: 200 - total flux cleaned = 0.00090358 Jy ! Total flux subtracted in 200 components = 0.00090358 Jy ! Clean residual min=-0.006157 max=0.005195 Jy/beam ! Clean residual mean=0.000010 rms=0.001426 Jy/beam ! Combined flux in latest and established models = 0.373667 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 89 components and 0.373666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165592Jy sigma=0.001160 ! Fit after self-cal, rms=0.165578Jy sigma=0.001160 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165578Jy sigma=0.001160 ! Fit after self-cal, rms=0.165137Jy sigma=0.001160 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.59 mas, bmaj=17.37 mas, bpa=2.645 degrees ! Estimated noise=1710.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00270193 Jy ! Component: 100 - total flux cleaned = 0.0030288 Jy ! Component: 150 - total flux cleaned = 0.00309794 Jy ! Component: 200 - total flux cleaned = 0.00303718 Jy ! Total flux subtracted in 200 components = 0.00303718 Jy ! Clean residual min=-0.004712 max=0.005793 Jy/beam ! Clean residual mean=0.000018 rms=0.001615 Jy/beam ! Combined flux in latest and established models = 0.376704 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 100 components and 0.376704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165128Jy sigma=0.001159 ! Fit after self-cal, rms=0.165178Jy sigma=0.001159 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.09522e-05 Jy ! Component: 100 - total flux cleaned = 0.000107273 Jy ! Component: 150 - total flux cleaned = 5.73052e-05 Jy ! Component: 200 - total flux cleaned = 5.52222e-05 Jy ! Total flux subtracted in 200 components = 5.52222e-05 Jy ! Clean residual min=-0.004649 max=0.005470 Jy/beam ! Clean residual mean=0.000018 rms=0.001545 Jy/beam ! Combined flux in latest and established models = 0.376759 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 105 components and 0.376759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165199Jy sigma=0.001159 ! Fit after self-cal, rms=0.165180Jy sigma=0.001159 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.883 mas, bmaj=6.995 mas, bpa=-3.954 degrees ! Estimated noise=1363.49 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.883 x 6.995 at -3.954 degrees (North through East) ! Clean map min=-0.0051695 max=0.21771 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.331 mas, bmaj=5.864 mas, bpa=-2.308 degrees ! Estimated noise=1883.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.160434 Jy ! Component: 100 - total flux cleaned = 0.211145 Jy ! Component: 150 - total flux cleaned = 0.244664 Jy ! Component: 200 - total flux cleaned = 0.269631 Jy ! Total flux subtracted in 200 components = 0.269631 Jy ! Clean residual min=-0.012254 max=0.017428 Jy/beam ! Clean residual mean=-0.000056 rms=0.003838 Jy/beam ! Combined flux in latest and established models = 0.269631 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.269631 Jy ! Inverting map and beam ! Estimated beam: bmin=2.883 mas, bmaj=6.995 mas, bpa=-3.954 degrees ! Estimated noise=1363.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0319323 Jy ! Component: 100 - total flux cleaned = 0.053108 Jy ! Component: 150 - total flux cleaned = 0.0679652 Jy ! Component: 200 - total flux cleaned = 0.0785953 Jy ! Total flux subtracted in 200 components = 0.0785953 Jy ! Clean residual min=-0.006590 max=0.008059 Jy/beam ! Clean residual mean=-0.000014 rms=0.002120 Jy/beam ! Combined flux in latest and established models = 0.348226 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 74 components and 0.348226 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.59 mas, bmaj=17.37 mas, bpa=2.645 degrees ! Estimated noise=1710.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132143 Jy ! Component: 100 - total flux cleaned = 0.0204025 Jy ! Component: 150 - total flux cleaned = 0.0246477 Jy ! Component: 200 - total flux cleaned = 0.027319 Jy ! Total flux subtracted in 200 components = 0.027319 Jy ! Clean residual min=-0.004904 max=0.005672 Jy/beam ! Clean residual mean=0.000014 rms=0.001560 Jy/beam ! Combined flux in latest and established models = 0.375545 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141906 Jy ! Component: 100 - total flux cleaned = 0.00184545 Jy ! Component: 150 - total flux cleaned = 0.00215861 Jy ! Component: 200 - total flux cleaned = 0.00223758 Jy ! Total flux subtracted in 200 components = 0.00223758 Jy ! Clean residual min=-0.004547 max=0.005033 Jy/beam ! Clean residual mean=0.000017 rms=0.001443 Jy/beam ! Combined flux in latest and established models = 0.377783 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 115 components and 0.377783 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.883 mas, bmaj=6.995 mas, bpa=-3.954 degrees ! Estimated noise=1363.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00178665 Jy ! Component: 100 - total flux cleaned = -0.00221263 Jy ! Component: 150 - total flux cleaned = -0.00220433 Jy ! Component: 200 - total flux cleaned = -0.00210606 Jy ! Total flux subtracted in 200 components = -0.00210606 Jy ! Clean residual min=-0.004655 max=0.004682 Jy/beam ! Clean residual mean=0.000008 rms=0.001238 Jy/beam ! Combined flux in latest and established models = 0.375677 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 130 components and 0.375676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165230Jy sigma=0.001159 ! Fit after self-cal, rms=0.165160Jy sigma=0.001159 wmodel J1911-2102_S_2014_01_04_pus_map.mod ! Writing 130 model components to file: J1911-2102_S_2014_01_04_pus_map.mod wobs J1911-2102_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1911-2102_S_2014_01_04_pus_uvs.fits wwins J1911-2102_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J1911-2102_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000350727 Jy ! Component: 100 - total flux cleaned = 0.000272287 Jy ! Component: 150 - total flux cleaned = 5.25639e-05 Jy ! Component: 200 - total flux cleaned = -8.76941e-05 Jy ! Component: 250 - total flux cleaned = -0.000153752 Jy ! Component: 300 - total flux cleaned = -0.000216471 Jy ! Component: 350 - total flux cleaned = -0.000152847 Jy ! Component: 400 - total flux cleaned = -0.000208628 Jy ! Component: 450 - total flux cleaned = -0.000376496 Jy ! Component: 500 - total flux cleaned = -0.0005905 Jy ! Component: 550 - total flux cleaned = -0.000695765 Jy ! Component: 600 - total flux cleaned = -0.000894989 Jy ! Component: 650 - total flux cleaned = -0.000749268 Jy ! Component: 700 - total flux cleaned = -0.00074881 Jy ! Component: 750 - total flux cleaned = -0.000840101 Jy ! Component: 800 - total flux cleaned = -0.000929439 Jy ! Component: 850 - total flux cleaned = -0.000929097 Jy ! Component: 900 - total flux cleaned = -0.00097211 Jy ! Component: 950 - total flux cleaned = -0.00101432 Jy ! Component: 1000 - total flux cleaned = -0.00109505 Jy ! Component: 1050 - total flux cleaned = -0.0010956 Jy ! Component: 1100 - total flux cleaned = -0.0010966 Jy ! Component: 1150 - total flux cleaned = -0.0010227 Jy ! Component: 1200 - total flux cleaned = -0.00105915 Jy ! Component: 1250 - total flux cleaned = -0.00105935 Jy ! Component: 1300 - total flux cleaned = -0.00109463 Jy ! Component: 1350 - total flux cleaned = -0.00099113 Jy ! Component: 1400 - total flux cleaned = -0.000890178 Jy ! Component: 1450 - total flux cleaned = -0.000889727 Jy ! Component: 1500 - total flux cleaned = -0.000825346 Jy ! Component: 1550 - total flux cleaned = -0.000762176 Jy ! Component: 1600 - total flux cleaned = -0.000824753 Jy ! Component: 1650 - total flux cleaned = -0.000823714 Jy ! Component: 1700 - total flux cleaned = -0.000792789 Jy ! Component: 1750 - total flux cleaned = -0.000762705 Jy ! Component: 1800 - total flux cleaned = -0.000586157 Jy ! Component: 1850 - total flux cleaned = -0.00047049 Jy ! Component: 1900 - total flux cleaned = -0.000327568 Jy ! Component: 1950 - total flux cleaned = -0.000130131 Jy ! Component: 2000 - total flux cleaned = 8.65321e-06 Jy ! Component: 2050 - total flux cleaned = 0.000201054 Jy ! Component: 2100 - total flux cleaned = 0.000417886 Jy ! Component: 2150 - total flux cleaned = 0.000605502 Jy ! Component: 2200 - total flux cleaned = 0.0008704 Jy ! Component: 2250 - total flux cleaned = 0.00107954 Jy ! Component: 2300 - total flux cleaned = 0.00141597 Jy ! Component: 2350 - total flux cleaned = 0.00156927 Jy ! Component: 2400 - total flux cleaned = 0.00182229 Jy ! Component: 2450 - total flux cleaned = 0.00204732 Jy ! Component: 2500 - total flux cleaned = 0.00222063 Jy ! Component: 2550 - total flux cleaned = 0.00234341 Jy ! Component: 2600 - total flux cleaned = 0.00253743 Jy ! Component: 2650 - total flux cleaned = 0.0027054 Jy ! Component: 2700 - total flux cleaned = 0.00284776 Jy ! Component: 2750 - total flux cleaned = 0.00289481 Jy ! Component: 2800 - total flux cleaned = 0.00305783 Jy ! Component: 2850 - total flux cleaned = 0.00314994 Jy ! Component: 2900 - total flux cleaned = 0.00326433 Jy ! Component: 2950 - total flux cleaned = 0.0034002 Jy ! Component: 3000 - total flux cleaned = 0.00342238 Jy ! Component: 3050 - total flux cleaned = 0.00344477 Jy ! Component: 3100 - total flux cleaned = 0.00348919 Jy ! Component: 3150 - total flux cleaned = 0.00359937 Jy ! Component: 3200 - total flux cleaned = 0.00364309 Jy ! Component: 3250 - total flux cleaned = 0.00379525 Jy ! Component: 3300 - total flux cleaned = 0.00390295 Jy ! Component: 3350 - total flux cleaned = 0.00396738 Jy ! Component: 3400 - total flux cleaned = 0.00413785 Jy ! Component: 3450 - total flux cleaned = 0.00413767 Jy ! Component: 3500 - total flux cleaned = 0.00420079 Jy ! Component: 3550 - total flux cleaned = 0.00420089 Jy ! Component: 3600 - total flux cleaned = 0.00432618 Jy ! Component: 3650 - total flux cleaned = 0.00438832 Jy ! Component: 3700 - total flux cleaned = 0.00440919 Jy ! Component: 3750 - total flux cleaned = 0.00447106 Jy ! Component: 3800 - total flux cleaned = 0.00449152 Jy ! Component: 3850 - total flux cleaned = 0.00453247 Jy ! Component: 3900 - total flux cleaned = 0.00463459 Jy ! Component: 3950 - total flux cleaned = 0.00459393 Jy ! Component: 4000 - total flux cleaned = 0.00459388 Jy ! Component: 4050 - total flux cleaned = 0.00461401 Jy ! Total flux subtracted in 4096 components = 0.00467462 Jy ! Clean residual min=-0.001199 max=0.001531 Jy/beam ! Clean residual mean=-0.000003 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.380351 Jy keep ! Adding 255 model components to the UV plane model. ! The established model now contains 385 components and 0.380351 Jy ![Exited script file: muppet] wmap "J1911-2102_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.883 x 6.995 at -3.954 degrees (North through East) ! Clean map min=-0.0021812 max=0.22137 Jy/beam ! Writing clean map to FITS file: J1911-2102_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.221366 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000315122 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.42706 0.42706 0.85412 1.70824 3.41648 6.83296 13.6659 27.3319 54.6637 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.221 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.883 x 6.995 at -3.954 degrees (North through East) ! Clean map min=-0.0021812 max=0.22137 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1911-2102_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:35:13 2017