! Started logfile: J1908-2942_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:35:03 2017 obs J1908-2942_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1908-2942_S_2014_01_04_pus_uva.fits ! AN table 1: 86 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.222222 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1908-2942 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 2752 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1908-2942_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 473 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 602 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 387 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 430 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.981191Jy sigma=0.009315 ! Fit after self-cal, rms=0.898898Jy sigma=0.008589 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.126 mas, bmaj=14.32 mas, bpa=-19.78 degrees ! Estimated noise=2798.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0792368 Jy ! Component: 100 - total flux cleaned = 0.0995647 Jy ! Total flux subtracted in 100 components = 0.0995647 Jy ! Clean residual min=-0.008499 max=0.008471 Jy/beam ! Clean residual mean=-0.000059 rms=0.002705 Jy/beam ! Combined flux in latest and established models = 0.0995646 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0995646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085566Jy sigma=0.000766 ! Fit after self-cal, rms=0.085295Jy sigma=0.000765 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.997 mas, bmaj=18.16 mas, bpa=-15.65 degrees ! Estimated noise=1751.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00522671 Jy ! Component: 100 - total flux cleaned = 0.00872245 Jy ! Component: 150 - total flux cleaned = 0.0112863 Jy ! Component: 200 - total flux cleaned = 0.0125884 Jy ! Total flux subtracted in 200 components = 0.0125884 Jy ! Clean residual min=-0.002804 max=0.002814 Jy/beam ! Clean residual mean=-0.000026 rms=0.001014 Jy/beam ! Combined flux in latest and established models = 0.112153 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 72 components and 0.112153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083331Jy sigma=0.000748 ! Fit after self-cal, rms=0.083287Jy sigma=0.000747 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 129 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 1.06 ! MK 1.00* NL 0.95 OV 1.02 PT 1.01 ! SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 1.02 ! MK 1.00* NL 0.98 OV 1.04 PT 0.94 ! SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* KP 1.00* LA 0.87 ! MK 1.04 NL 1.07 OV 0.98 PT 0.92 ! SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* KP 1.00* LA 1.00 ! MK 1.00* NL 1.04 OV 1.06 PT 0.98 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.083287Jy sigma=0.000747 ! Fit after self-cal, rms=0.082583Jy sigma=0.000751 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.963 mas, bmaj=18.08 mas, bpa=-16.54 degrees ! Estimated noise=1793.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00167073 Jy ! Component: 100 - total flux cleaned = -0.00176997 Jy ! Component: 150 - total flux cleaned = -0.00184278 Jy ! Component: 200 - total flux cleaned = -0.00237937 Jy ! Total flux subtracted in 200 components = -0.00237937 Jy ! Clean residual min=-0.001063 max=0.001058 Jy/beam ! Clean residual mean=0.000002 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.109774 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 118 components and 0.109774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082372Jy sigma=0.000750 ! Fit after self-cal, rms=0.082512Jy sigma=0.000749 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082512Jy sigma=0.000749 ! Fit after self-cal, rms=0.082747Jy sigma=0.000749 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.957 mas, bmaj=18.06 mas, bpa=-16.59 degrees ! Estimated noise=1796.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00041324 Jy ! Component: 100 - total flux cleaned = 0.000490726 Jy ! Component: 150 - total flux cleaned = 0.000184515 Jy ! Component: 200 - total flux cleaned = -4.32943e-05 Jy ! Total flux subtracted in 200 components = -4.32943e-05 Jy ! Clean residual min=-0.000919 max=0.000916 Jy/beam ! Clean residual mean=-0.000000 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.10973 Jy selfcal ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 158 components and 0.10973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082625Jy sigma=0.000748 ! Fit after self-cal, rms=0.082703Jy sigma=0.000748 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000388008 Jy ! Component: 100 - total flux cleaned = 0.000141403 Jy ! Component: 150 - total flux cleaned = -0.000200172 Jy ! Component: 200 - total flux cleaned = -0.000357802 Jy ! Total flux subtracted in 200 components = -0.000357802 Jy ! Clean residual min=-0.000839 max=0.000840 Jy/beam ! Clean residual mean=0.000001 rms=0.000290 Jy/beam ! Combined flux in latest and established models = 0.109373 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 189 components and 0.109373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082612Jy sigma=0.000747 ! Fit after self-cal, rms=0.082637Jy sigma=0.000747 ! Inverting map ! Added new window around map position (111.5, 127). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000596302 Jy ! Component: 100 - total flux cleaned = 0.000479534 Jy ! Component: 150 - total flux cleaned = 0.000428713 Jy ! Component: 200 - total flux cleaned = 0.000382209 Jy ! Total flux subtracted in 200 components = 0.000382209 Jy ! Clean residual min=-0.001273 max=0.001200 Jy/beam ! Clean residual mean=-0.000000 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.109755 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 209 components and 0.109755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082611Jy sigma=0.000747 ! Fit after self-cal, rms=0.082587Jy sigma=0.000747 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082587Jy sigma=0.000747 ! Fit after self-cal, rms=0.082621Jy sigma=0.000747 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.903 mas, bmaj=17.94 mas, bpa=-16.92 degrees ! Estimated noise=1795.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000291609 Jy ! Component: 100 - total flux cleaned = 0.000414129 Jy ! Component: 150 - total flux cleaned = 0.000386091 Jy ! Component: 200 - total flux cleaned = 0.000337332 Jy ! Total flux subtracted in 200 components = 0.000337332 Jy ! Clean residual min=-0.001306 max=0.001303 Jy/beam ! Clean residual mean=-0.000002 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.110092 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 220 components and 0.110092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082601Jy sigma=0.000746 ! Fit after self-cal, rms=0.082626Jy sigma=0.000746 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.71057e-05 Jy ! Component: 100 - total flux cleaned = -7.84063e-05 Jy ! Component: 150 - total flux cleaned = -0.000127312 Jy ! Component: 200 - total flux cleaned = -0.000172755 Jy ! Total flux subtracted in 200 components = -0.000172755 Jy ! Clean residual min=-0.001321 max=0.001308 Jy/beam ! Clean residual mean=-0.000002 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.109919 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 223 components and 0.109919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082611Jy sigma=0.000746 ! Fit after self-cal, rms=0.082607Jy sigma=0.000746 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082607Jy sigma=0.000746 ! Fit after self-cal, rms=0.082437Jy sigma=0.000746 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.856 mas, bmaj=33.19 mas, bpa=-2.961 degrees ! Estimated noise=1912.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000118875 Jy ! Component: 100 - total flux cleaned = -0.000108167 Jy ! Component: 150 - total flux cleaned = -9.35914e-05 Jy ! Component: 200 - total flux cleaned = -8.1299e-05 Jy ! Total flux subtracted in 200 components = -8.1299e-05 Jy ! Clean residual min=-0.001042 max=0.001021 Jy/beam ! Clean residual mean=-0.000003 rms=0.000278 Jy/beam ! Combined flux in latest and established models = 0.109838 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 243 components and 0.109838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082434Jy sigma=0.000746 ! Fit after self-cal, rms=0.082442Jy sigma=0.000746 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000202009 Jy ! Component: 100 - total flux cleaned = -0.000274 Jy ! Component: 150 - total flux cleaned = -0.000298497 Jy ! Component: 200 - total flux cleaned = -0.000320713 Jy ! Total flux subtracted in 200 components = -0.000320713 Jy ! Clean residual min=-0.001024 max=0.000958 Jy/beam ! Clean residual mean=-0.000003 rms=0.000261 Jy/beam ! Combined flux in latest and established models = 0.109517 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 246 components and 0.109517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082439Jy sigma=0.000746 ! Fit after self-cal, rms=0.082437Jy sigma=0.000746 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.858 mas, bmaj=17.85 mas, bpa=-17.19 degrees ! Estimated noise=1790.14 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.858 x 17.85 at -17.19 degrees (North through East) ! Clean map min=-0.0033541 max=0.094567 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.043 mas, bmaj=14.27 mas, bpa=-20.55 degrees ! Estimated noise=2820.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0328858 Jy ! Component: 100 - total flux cleaned = 0.0482302 Jy ! Component: 150 - total flux cleaned = 0.0588794 Jy ! Component: 200 - total flux cleaned = 0.0601832 Jy ! Total flux subtracted in 200 components = 0.0601832 Jy ! Clean residual min=-0.030449 max=0.060345 Jy/beam ! Clean residual mean=-0.000234 rms=0.012020 Jy/beam ! Combined flux in latest and established models = 0.0601832 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0601832 Jy ! Inverting map and beam ! Estimated beam: bmin=4.858 mas, bmaj=17.85 mas, bpa=-17.19 degrees ! Estimated noise=1790.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.057948 Jy ! Component: 100 - total flux cleaned = 0.0678446 Jy ! Component: 150 - total flux cleaned = 0.0679876 Jy ! Component: 200 - total flux cleaned = 0.0660934 Jy ! Total flux subtracted in 200 components = 0.0660934 Jy ! Clean residual min=-0.011675 max=0.011328 Jy/beam ! Clean residual mean=-0.000044 rms=0.003642 Jy/beam ! Combined flux in latest and established models = 0.126277 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 67 components and 0.126277 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.856 mas, bmaj=33.19 mas, bpa=-2.961 degrees ! Estimated noise=1912.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000365044 Jy ! Component: 100 - total flux cleaned = -0.0003972 Jy ! Component: 150 - total flux cleaned = 0.000442004 Jy ! Component: 200 - total flux cleaned = 0.000670244 Jy ! Total flux subtracted in 200 components = 0.000670244 Jy ! Clean residual min=-0.007914 max=0.007081 Jy/beam ! Clean residual mean=-0.000025 rms=0.002424 Jy/beam ! Combined flux in latest and established models = 0.126947 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.1975e-06 Jy ! Component: 100 - total flux cleaned = 2.54877e-07 Jy ! Component: 150 - total flux cleaned = 1.2859e-05 Jy ! Component: 200 - total flux cleaned = 0.000161168 Jy ! Total flux subtracted in 200 components = 0.000161168 Jy ! Clean residual min=-0.005545 max=0.005873 Jy/beam ! Clean residual mean=-0.000011 rms=0.001807 Jy/beam ! Combined flux in latest and established models = 0.127108 Jy ! Adding 91 model components to the UV plane model. ! The established model now contains 153 components and 0.127108 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.858 mas, bmaj=17.85 mas, bpa=-17.19 degrees ! Estimated noise=1790.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000801447 Jy ! Component: 100 - total flux cleaned = -0.00112258 Jy ! Component: 150 - total flux cleaned = -0.00139225 Jy ! Component: 200 - total flux cleaned = -0.00138655 Jy ! Total flux subtracted in 200 components = -0.00138655 Jy ! Clean residual min=-0.006483 max=0.006760 Jy/beam ! Clean residual mean=-0.000011 rms=0.001735 Jy/beam ! Combined flux in latest and established models = 0.125722 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 179 components and 0.125722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083830Jy sigma=0.000761 ! Fit after self-cal, rms=0.083065Jy sigma=0.000755 wmodel J1908-2942_S_2014_01_04_pus_map.mod ! Writing 179 model components to file: J1908-2942_S_2014_01_04_pus_map.mod wobs J1908-2942_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1908-2942_S_2014_01_04_pus_uvs.fits wwins J1908-2942_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J1908-2942_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000102437 Jy ! Component: 100 - total flux cleaned = 0.000370863 Jy ! Component: 150 - total flux cleaned = 0.00073364 Jy ! Component: 200 - total flux cleaned = 0.00051871 Jy ! Component: 250 - total flux cleaned = 0.000516437 Jy ! Component: 300 - total flux cleaned = 0.00074723 Jy ! Component: 350 - total flux cleaned = 0.000705604 Jy ! Component: 400 - total flux cleaned = 0.000705267 Jy ! Component: 450 - total flux cleaned = 0.000666662 Jy ! Component: 500 - total flux cleaned = 0.000631653 Jy ! Component: 550 - total flux cleaned = 0.000566867 Jy ! Component: 600 - total flux cleaned = 0.000472955 Jy ! Component: 650 - total flux cleaned = 0.000443682 Jy ! Component: 700 - total flux cleaned = 0.000471215 Jy ! Component: 750 - total flux cleaned = 0.000526432 Jy ! Component: 800 - total flux cleaned = 0.000741576 Jy ! Component: 850 - total flux cleaned = 0.000871408 Jy ! Component: 900 - total flux cleaned = 0.00102365 Jy ! Component: 950 - total flux cleaned = 0.00122166 Jy ! Component: 1000 - total flux cleaned = 0.0013909 Jy ! Component: 1050 - total flux cleaned = 0.00148563 Jy ! Component: 1100 - total flux cleaned = 0.00169552 Jy ! Component: 1150 - total flux cleaned = 0.00188074 Jy ! Component: 1200 - total flux cleaned = 0.00204233 Jy ! Component: 1250 - total flux cleaned = 0.00220359 Jy ! Component: 1300 - total flux cleaned = 0.0023883 Jy ! Component: 1350 - total flux cleaned = 0.00254995 Jy ! Component: 1400 - total flux cleaned = 0.00271216 Jy ! Component: 1450 - total flux cleaned = 0.00280577 Jy ! Component: 1500 - total flux cleaned = 0.00292315 Jy ! Component: 1550 - total flux cleaned = 0.00306545 Jy ! Component: 1600 - total flux cleaned = 0.00323341 Jy ! Component: 1650 - total flux cleaned = 0.0033552 Jy ! Component: 1700 - total flux cleaned = 0.00352942 Jy ! Component: 1750 - total flux cleaned = 0.00365554 Jy ! Component: 1800 - total flux cleaned = 0.00380994 Jy ! Component: 1850 - total flux cleaned = 0.00391467 Jy ! Component: 1900 - total flux cleaned = 0.0040223 Jy ! Component: 1950 - total flux cleaned = 0.00410501 Jy ! Component: 2000 - total flux cleaned = 0.00418968 Jy ! Component: 2050 - total flux cleaned = 0.00427682 Jy ! Component: 2100 - total flux cleaned = 0.00433582 Jy ! Component: 2150 - total flux cleaned = 0.00439589 Jy ! Component: 2200 - total flux cleaned = 0.00445759 Jy ! Component: 2250 - total flux cleaned = 0.00452125 Jy ! Component: 2300 - total flux cleaned = 0.00455427 Jy ! Component: 2350 - total flux cleaned = 0.0045875 Jy ! Component: 2400 - total flux cleaned = 0.00462221 Jy ! Component: 2450 - total flux cleaned = 0.0046223 Jy ! Component: 2500 - total flux cleaned = 0.00465904 Jy ! Component: 2550 - total flux cleaned = 0.00469561 Jy ! Component: 2600 - total flux cleaned = 0.00477251 Jy ! Component: 2650 - total flux cleaned = 0.00477281 Jy ! Component: 2700 - total flux cleaned = 0.00481398 Jy ! Component: 2750 - total flux cleaned = 0.00481411 Jy ! Component: 2800 - total flux cleaned = 0.00485644 Jy ! Component: 2850 - total flux cleaned = 0.0049006 Jy ! Component: 2900 - total flux cleaned = 0.00494534 Jy ! Component: 2950 - total flux cleaned = 0.00503918 Jy ! Component: 3000 - total flux cleaned = 0.00503943 Jy ! Component: 3050 - total flux cleaned = 0.00513859 Jy ! Component: 3100 - total flux cleaned = 0.00518992 Jy ! Component: 3150 - total flux cleaned = 0.00524251 Jy ! Component: 3200 - total flux cleaned = 0.00524213 Jy ! Component: 3250 - total flux cleaned = 0.00535305 Jy ! Component: 3300 - total flux cleaned = 0.00535295 Jy ! Component: 3350 - total flux cleaned = 0.00541007 Jy ! Component: 3400 - total flux cleaned = 0.00540996 Jy ! Component: 3450 - total flux cleaned = 0.00547165 Jy ! Component: 3500 - total flux cleaned = 0.0055348 Jy ! Component: 3550 - total flux cleaned = 0.00560064 Jy ! Component: 3600 - total flux cleaned = 0.00560005 Jy ! Component: 3650 - total flux cleaned = 0.00574018 Jy ! Component: 3700 - total flux cleaned = 0.00574098 Jy ! Component: 3750 - total flux cleaned = 0.00581586 Jy ! Component: 3800 - total flux cleaned = 0.00581582 Jy ! Component: 3850 - total flux cleaned = 0.00589418 Jy ! Component: 3900 - total flux cleaned = 0.00589472 Jy ! Component: 3950 - total flux cleaned = 0.00597683 Jy ! Component: 4000 - total flux cleaned = 0.00606281 Jy ! Component: 4050 - total flux cleaned = 0.00606393 Jy ! Total flux subtracted in 4096 components = 0.00606535 Jy ! Clean residual min=-0.005020 max=0.005033 Jy/beam ! Clean residual mean=0.000013 rms=0.001441 Jy/beam ! Combined flux in latest and established models = 0.131787 Jy keep ! Adding 158 model components to the UV plane model. ! The established model now contains 337 components and 0.131787 Jy ![Exited script file: muppet] wmap "J1908-2942_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.858 x 17.85 at -17.19 degrees (North through East) ! Clean map min=-0.01252 max=0.070851 Jy/beam ! Writing clean map to FITS file: J1908-2942_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0708509 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0016812 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -7.11859 7.11859 14.2372 28.4744 56.9488 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.07 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.858 x 17.85 at -17.19 degrees (North through East) ! Clean map min=-0.01252 max=0.070851 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1908-2942_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:35:08 2017