! Started logfile: J1853+2344_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:35:54 2016 obs J1853+2344_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J1853+2344_S_2014_08_05_pus_uva.fits ! AN table 1: 101 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.781738 visibilities/baseline/integration-bin. ! Found source: J1853+2344 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 14212 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1853+2344_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.869855Jy sigma=0.010053 ! Fit after self-cal, rms=0.847911Jy sigma=0.009878 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.756 mas, bmaj=7.865 mas, bpa=15.48 degrees ! Estimated noise=793.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.118865 Jy ! Component: 100 - total flux cleaned = 0.145163 Jy ! Total flux subtracted in 100 components = 0.145163 Jy ! Clean residual min=-0.005894 max=0.008554 Jy/beam ! Clean residual mean=-0.000005 rms=0.001475 Jy/beam ! Combined flux in latest and established models = 0.145163 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.145163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079851Jy sigma=0.000824 ! Fit after self-cal, rms=0.079846Jy sigma=0.000824 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.663 mas, bmaj=8.532 mas, bpa=15.49 degrees ! Estimated noise=521.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113706 Jy ! Component: 100 - total flux cleaned = 0.0171478 Jy ! Component: 150 - total flux cleaned = 0.0208101 Jy ! Component: 200 - total flux cleaned = 0.0232584 Jy ! Total flux subtracted in 200 components = 0.0232584 Jy ! Clean residual min=-0.003867 max=0.003554 Jy/beam ! Clean residual mean=0.000006 rms=0.000950 Jy/beam ! Combined flux in latest and established models = 0.168422 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 56 components and 0.168422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078184Jy sigma=0.000804 ! Fit after self-cal, rms=0.078190Jy sigma=0.000804 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.89 HN 0.99 KP 1.05 ! LA 1.11 MK 1.00* NL 0.96 OV 0.97 ! PT 1.03 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.07 HN 1.04 KP 1.01 ! LA 1.04 MK 1.00* NL 0.93 OV 1.00 ! PT 0.99 SC 1.11 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.19 HN 1.04 KP 0.89 ! LA 0.83 MK 1.00* NL 0.95 OV 0.93 ! PT 0.98 SC 1.09 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.05 HN 1.02 KP 0.86 ! LA 0.79 MK 1.00* NL 1.06 OV 0.99 ! PT 1.03 SC 1.10 ! ! ! Fit before self-cal, rms=0.078190Jy sigma=0.000804 ! Fit after self-cal, rms=0.075556Jy sigma=0.000778 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.766 mas, bmaj=8.576 mas, bpa=14.83 degrees ! Estimated noise=517.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00187813 Jy ! Component: 100 - total flux cleaned = -0.00192737 Jy ! Component: 150 - total flux cleaned = -0.00184587 Jy ! Component: 200 - total flux cleaned = -0.0017379 Jy ! Total flux subtracted in 200 components = -0.0017379 Jy ! Clean residual min=-0.002222 max=0.002300 Jy/beam ! Clean residual mean=0.000001 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.166684 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 67 components and 0.166684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075471Jy sigma=0.000777 ! Fit after self-cal, rms=0.075498Jy sigma=0.000777 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075498Jy sigma=0.000777 ! Fit after self-cal, rms=0.078388Jy sigma=0.000773 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.73 mas, bmaj=8.566 mas, bpa=15.09 degrees ! Estimated noise=516.591 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000401561 Jy ! Component: 100 - total flux cleaned = -0.000543476 Jy ! Component: 150 - total flux cleaned = -0.000565968 Jy ! Component: 200 - total flux cleaned = -0.000566421 Jy ! Total flux subtracted in 200 components = -0.000566421 Jy ! Clean residual min=-0.001594 max=0.001933 Jy/beam ! Clean residual mean=0.000004 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.166117 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 71 components and 0.166117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078371Jy sigma=0.000773 ! Fit after self-cal, rms=0.078421Jy sigma=0.000773 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-62.5, 56). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184579 Jy ! Component: 100 - total flux cleaned = 0.0022251 Jy ! Component: 150 - total flux cleaned = 0.00241995 Jy ! Component: 200 - total flux cleaned = 0.00258543 Jy ! Total flux subtracted in 200 components = 0.00258543 Jy ! Clean residual min=-0.001587 max=0.001379 Jy/beam ! Clean residual mean=0.000003 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.168703 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 97 components and 0.168703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078379Jy sigma=0.000772 ! Fit after self-cal, rms=0.078375Jy sigma=0.000772 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078375Jy sigma=0.000772 ! Fit after self-cal, rms=0.078515Jy sigma=0.000772 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.734 mas, bmaj=8.569 mas, bpa=15.1 degrees ! Estimated noise=515.824 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000119714 Jy ! Component: 100 - total flux cleaned = -0.000140625 Jy ! Component: 150 - total flux cleaned = -0.000157928 Jy ! Component: 200 - total flux cleaned = -0.000108894 Jy ! Total flux subtracted in 200 components = -0.000108894 Jy ! Clean residual min=-0.001595 max=0.001315 Jy/beam ! Clean residual mean=0.000004 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.168594 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 107 components and 0.168594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078505Jy sigma=0.000772 ! Fit after self-cal, rms=0.078508Jy sigma=0.000772 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.1078e-05 Jy ! Component: 100 - total flux cleaned = 3.75699e-06 Jy ! Component: 150 - total flux cleaned = -1.07405e-05 Jy ! Component: 200 - total flux cleaned = 2.91859e-06 Jy ! Total flux subtracted in 200 components = 2.91859e-06 Jy ! Clean residual min=-0.001586 max=0.001317 Jy/beam ! Clean residual mean=0.000004 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.168597 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 116 components and 0.168597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078503Jy sigma=0.000772 ! Fit after self-cal, rms=0.078503Jy sigma=0.000772 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078503Jy sigma=0.000772 ! Fit after self-cal, rms=0.078494Jy sigma=0.000772 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.696 mas, bmaj=10.18 mas, bpa=8.039 degrees ! Estimated noise=568.691 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.15832e-05 Jy ! Component: 100 - total flux cleaned = 3.80204e-05 Jy ! Component: 150 - total flux cleaned = 1.26255e-05 Jy ! Component: 200 - total flux cleaned = -9.40119e-06 Jy ! Total flux subtracted in 200 components = -9.40119e-06 Jy ! Clean residual min=-0.001562 max=0.001357 Jy/beam ! Clean residual mean=0.000006 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.168588 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 127 components and 0.168588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078491Jy sigma=0.000772 ! Fit after self-cal, rms=0.078491Jy sigma=0.000772 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.81977e-05 Jy ! Component: 100 - total flux cleaned = -0.000107695 Jy ! Component: 150 - total flux cleaned = -0.000116393 Jy ! Component: 200 - total flux cleaned = -0.000117126 Jy ! Total flux subtracted in 200 components = -0.000117126 Jy ! Clean residual min=-0.001547 max=0.001323 Jy/beam ! Clean residual mean=0.000006 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.16847 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 133 components and 0.16847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078490Jy sigma=0.000772 ! Fit after self-cal, rms=0.078490Jy sigma=0.000772 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.735 mas, bmaj=8.572 mas, bpa=15.12 degrees ! Estimated noise=515.387 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.735 x 8.572 at 15.12 degrees (North through East) ! Clean map min=-0.0015243 max=0.15337 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.789 mas, bmaj=7.852 mas, bpa=15 degrees ! Estimated noise=794.073 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.118906 Jy ! Component: 100 - total flux cleaned = 0.144931 Jy ! Component: 150 - total flux cleaned = 0.153034 Jy ! Component: 200 - total flux cleaned = 0.156907 Jy ! Total flux subtracted in 200 components = 0.156907 Jy ! Clean residual min=-0.002201 max=0.002067 Jy/beam ! Clean residual mean=0.000000 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.156907 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.156907 Jy ! Inverting map and beam ! Estimated beam: bmin=4.735 mas, bmaj=8.572 mas, bpa=15.12 degrees ! Estimated noise=515.387 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00296286 Jy ! Component: 100 - total flux cleaned = 0.00498012 Jy ! Component: 150 - total flux cleaned = 0.00632946 Jy ! Component: 200 - total flux cleaned = 0.00713997 Jy ! Total flux subtracted in 200 components = 0.00713997 Jy ! Clean residual min=-0.001623 max=0.001399 Jy/beam ! Clean residual mean=0.000003 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.164047 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 48 components and 0.164047 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.696 mas, bmaj=10.18 mas, bpa=8.039 degrees ! Estimated noise=568.691 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102163 Jy ! Component: 100 - total flux cleaned = 0.00151588 Jy ! Component: 150 - total flux cleaned = 0.00194043 Jy ! Component: 200 - total flux cleaned = 0.00225535 Jy ! Total flux subtracted in 200 components = 0.00225535 Jy ! Clean residual min=-0.001573 max=0.001440 Jy/beam ! Clean residual mean=0.000005 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.166302 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000273839 Jy ! Component: 100 - total flux cleaned = 0.000514325 Jy ! Component: 150 - total flux cleaned = 0.000646576 Jy ! Component: 200 - total flux cleaned = 0.000767505 Jy ! Total flux subtracted in 200 components = 0.000767505 Jy ! Clean residual min=-0.001557 max=0.001394 Jy/beam ! Clean residual mean=0.000006 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.16707 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 107 components and 0.16707 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.735 mas, bmaj=8.572 mas, bpa=15.12 degrees ! Estimated noise=515.387 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000194346 Jy ! Component: 100 - total flux cleaned = 0.000251147 Jy ! Component: 150 - total flux cleaned = 0.000284351 Jy ! Component: 200 - total flux cleaned = 0.000283252 Jy ! Total flux subtracted in 200 components = 0.000283252 Jy ! Clean residual min=-0.001527 max=0.001237 Jy/beam ! Clean residual mean=0.000003 rms=0.000333 Jy/beam ! Combined flux in latest and established models = 0.167353 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 124 components and 0.167353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078493Jy sigma=0.000772 ! Fit after self-cal, rms=0.078491Jy sigma=0.000772 wmodel J1853+2344_S_2014_08_05_pus_map.mod ! Writing 124 model components to file: J1853+2344_S_2014_08_05_pus_map.mod wobs J1853+2344_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J1853+2344_S_2014_08_05_pus_uvs.fits wwins J1853+2344_S_2014_08_05_pus_map.win ! wwins: Wrote 2 windows to J1853+2344_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000530435 Jy ! Component: 100 - total flux cleaned = -0.000685598 Jy ! Component: 150 - total flux cleaned = -0.000873756 Jy ! Component: 200 - total flux cleaned = -0.000835822 Jy ! Component: 250 - total flux cleaned = -0.00079817 Jy ! Component: 300 - total flux cleaned = -0.000743503 Jy ! Component: 350 - total flux cleaned = -0.000708504 Jy ! Component: 400 - total flux cleaned = -0.000742955 Jy ! Component: 450 - total flux cleaned = -0.00075981 Jy ! Component: 500 - total flux cleaned = -0.000776533 Jy ! Component: 550 - total flux cleaned = -0.000856647 Jy ! Component: 600 - total flux cleaned = -0.000903551 Jy ! Component: 650 - total flux cleaned = -0.000965319 Jy ! Component: 700 - total flux cleaned = -0.00105605 Jy ! Component: 750 - total flux cleaned = -0.00108583 Jy ! Component: 800 - total flux cleaned = -0.00117353 Jy ! Component: 850 - total flux cleaned = -0.00121666 Jy ! Component: 900 - total flux cleaned = -0.00121709 Jy ! Component: 950 - total flux cleaned = -0.001259 Jy ! Component: 1000 - total flux cleaned = -0.00123171 Jy ! Component: 1050 - total flux cleaned = -0.00121857 Jy ! Component: 1100 - total flux cleaned = -0.00120538 Jy ! Component: 1150 - total flux cleaned = -0.00117948 Jy ! Component: 1200 - total flux cleaned = -0.00115389 Jy ! Component: 1250 - total flux cleaned = -0.00106488 Jy ! Component: 1300 - total flux cleaned = -0.00101479 Jy ! Component: 1350 - total flux cleaned = -0.000965279 Jy ! Component: 1400 - total flux cleaned = -0.0009162 Jy ! Component: 1450 - total flux cleaned = -0.000867859 Jy ! Component: 1500 - total flux cleaned = -0.000832001 Jy ! Component: 1550 - total flux cleaned = -0.000820055 Jy ! Component: 1600 - total flux cleaned = -0.000749939 Jy ! Component: 1650 - total flux cleaned = -0.000692272 Jy ! Component: 1700 - total flux cleaned = -0.000624226 Jy ! Component: 1750 - total flux cleaned = -0.000680432 Jy ! Component: 1800 - total flux cleaned = -0.000657924 Jy ! Component: 1850 - total flux cleaned = -0.00058098 Jy ! Component: 1900 - total flux cleaned = -0.000603033 Jy ! Component: 1950 - total flux cleaned = -0.000602799 Jy ! Component: 2000 - total flux cleaned = -0.000581394 Jy ! Component: 2050 - total flux cleaned = -0.000570795 Jy ! Component: 2100 - total flux cleaned = -0.000560354 Jy ! Component: 2150 - total flux cleaned = -0.000580912 Jy ! Component: 2200 - total flux cleaned = -0.000550143 Jy ! Component: 2250 - total flux cleaned = -0.000529832 Jy ! Component: 2300 - total flux cleaned = -0.000539988 Jy ! Component: 2350 - total flux cleaned = -0.000520227 Jy ! Component: 2400 - total flux cleaned = -0.000539988 Jy ! Component: 2450 - total flux cleaned = -0.000549883 Jy ! Component: 2500 - total flux cleaned = -0.000540116 Jy ! Component: 2550 - total flux cleaned = -0.000511246 Jy ! Component: 2600 - total flux cleaned = -0.000482744 Jy ! Component: 2650 - total flux cleaned = -0.000473353 Jy ! Component: 2700 - total flux cleaned = -0.000464037 Jy ! Component: 2750 - total flux cleaned = -0.000427001 Jy ! Component: 2800 - total flux cleaned = -0.000454434 Jy ! Component: 2850 - total flux cleaned = -0.000427126 Jy ! Component: 2900 - total flux cleaned = -0.000463145 Jy ! Component: 2950 - total flux cleaned = -0.000463187 Jy ! Component: 3000 - total flux cleaned = -0.000472034 Jy ! Component: 3050 - total flux cleaned = -0.00048076 Jy ! Component: 3100 - total flux cleaned = -0.000506872 Jy ! Component: 3150 - total flux cleaned = -0.000489519 Jy ! Component: 3200 - total flux cleaned = -0.000506698 Jy ! Component: 3250 - total flux cleaned = -0.000463937 Jy ! Component: 3300 - total flux cleaned = -0.000514852 Jy ! Component: 3350 - total flux cleaned = -0.000497933 Jy ! Component: 3400 - total flux cleaned = -0.000489647 Jy ! Component: 3450 - total flux cleaned = -0.000539461 Jy ! Component: 3500 - total flux cleaned = -0.00053113 Jy ! Component: 3550 - total flux cleaned = -0.000531151 Jy ! Component: 3600 - total flux cleaned = -0.000490583 Jy ! Component: 3650 - total flux cleaned = -0.00051485 Jy ! Component: 3700 - total flux cleaned = -0.000538938 Jy ! Component: 3750 - total flux cleaned = -0.000530998 Jy ! Component: 3800 - total flux cleaned = -0.00049144 Jy ! Component: 3850 - total flux cleaned = -0.000515161 Jy ! Component: 3900 - total flux cleaned = -0.000522979 Jy ! Component: 3950 - total flux cleaned = -0.000530731 Jy ! Component: 4000 - total flux cleaned = -0.000515265 Jy ! Component: 4050 - total flux cleaned = -0.000545908 Jy ! Total flux subtracted in 4096 components = -0.000515323 Jy ! Clean residual min=-0.000421 max=0.000419 Jy/beam ! Clean residual mean=0.000002 rms=0.000149 Jy/beam ! Combined flux in latest and established models = 0.166838 Jy keep ! Adding 307 model components to the UV plane model. ! The established model now contains 431 components and 0.166838 Jy ![Exited script file: muppet] wmap "J1853+2344_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.735 x 8.572 at 15.12 degrees (North through East) ! Clean map min=-0.0012661 max=0.15366 Jy/beam ! Writing clean map to FITS file: J1853+2344_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.153659 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000148085 device "J1853+2344_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J1853+2344_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.289116 0.289116 0.578233 1.15647 2.31293 4.62586 9.25172 18.5034 37.0069 74.0138 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.153 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.735 x 8.572 at 15.12 degrees (North through East) ! Clean map min=-0.0012661 max=0.15366 Jy/beam quit ! Quitting program ! Log file J1853+2344_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:35:59 2016